r: 11050036 p: 9.33 pid: 155685 b: TEC7 q: 938 st: 1 lt: 1 ean: 5414195535165 sr: TEC7 535106000 sr_no_br: 535106000 sr_no_br_cl: 535106000 sr_cl: TEC7535106000 sr_dash: sold: 45446.43 p_range: none type: standard act: 1 avo: 1 av: Color Black EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Black n: TEC7 535106000 all purpose adhesive black RAL 9004 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive black RAL 9004 in cartridge (310 ml) kpn: 535106000 kpn_dash: kpn_clear: 535106000 bkpn: TEC7 535106000 bkpn_clear: TEC7 535106000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535106000 sr_ns: TEC7535106000
r: 11050091 p: 9.33 pid: 155145 b: TEC7 q: 1142 st: 1 lt: 1 ean: 5414195535264 sr: TEC7 535206000 sr_no_br: 535206000 sr_no_br_cl: 535206000 sr_cl: TEC7535206000 sr_dash: sold: 40408.23 p_range: none type: standard act: 1 avo: 1 av: Color White EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) White n: TEC7 535206000 all purpose adhesive white RAL 9016 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive white RAL 9016 in cartridge (310 ml) kpn: 535206000 kpn_dash: kpn_clear: 535206000 bkpn: TEC7 535206000 bkpn_clear: TEC7 535206000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535206000 sr_ns: TEC7535206000
r: 11050064 p: 7.65 pid: 155142 b: TEC7 q: 864 st: 1 lt: 1 ean: 5414195535363 sr: TEC7 535306000 sr_no_br: 535306000 sr_no_br_cl: 535306000 sr_cl: TEC7535306000 sr_dash: sold: 20119.5 p_range: none type: standard act: 1 avo: 1 av: Color Grey EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Grey n: TEC7 535306000 all purpose adhesive grey RAL 7004 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive grey RAL 7004 in cartridge (310 ml) kpn: 535306000 kpn_dash: kpn_clear: 535306000 bkpn: TEC7 535306000 bkpn_clear: TEC7 535306000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535306000 sr_ns: TEC7535306000
r: 11050092 p: 10.17 pid: 156324 b: TEC7 q: 824 st: 1 lt: 1 ean: 5414195539569 sr: TEC7 539506000 sr_no_br: 539506000 sr_no_br_cl: 539506000 sr_cl: TEC7539506000 sr_dash: sold: 18478.89 p_range: none type: standard act: 1 avo: 1 av: Color Colourless Relative density 1,1 ADR packing group ADR class UN number Net volume 310 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Crystal clear n: TEC7 Trans Clear universal sealant transparent (310 ml cartridge) - 539506000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description TRANSPARENT UNIVERSAL SEALANT Also adheres to wet substrates Mould- and bacteria-resistant Super strong and permanently elastic after rapid curing Free of solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Processing temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: universal sealant transparent (310 ml cartridge) kpn: Trans Clear kpn_dash: kpn_clear: TransClear bkpn: TEC7 Trans Clear bkpn_clear: TEC7 TransClear c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 539506000 sr_ns: TEC7539506000
r: 02313572 p: 11.62 pid: 155931 b: TEC7 q: 147 st: 1 lt: 1 ean: 5414195534557 sr: TEC7 534525000 sr_no_br: 534525000 sr_no_br_cl: 534525000 sr_cl: TEC7534525000 sr_dash: sold: 15768.34 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Colour (manufacturer) White n: TEC7 X-Tack assembly and sealing sealant white in cartridge (290 ml) - 534525000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description EXTREME MOUNTING WITHOUT SUPPORT Extreme initial tack Vibration and impact resistant Also on wet substrates Perfect for vertical applications Super strong before curing: 600kg/m² Stable in adhesive thicknesses up to 40 mm Permanently elastic Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between -10°C and +40°C Apply to clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation. The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN When applying, position the nozzle vertically on the surface Easiest to spray with the Tec7 Multigun The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots) ds: dsc: kts: assembly and sealing sealant white in cartridge (290 ml) kpn: X-Tack kpn_dash: X kpn_clear: XTack bkpn: TEC7 X-Tack bkpn_clear: TEC7 XTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 534525000 sr_ns: TEC7534525000
r: 02313394 p: 11.62 pid: 155170 b: TEC7 q: 38 st: 1 lt: 1 ean: 5414195530009 sr: TEC7 534535000 sr_no_br: 534535000 sr_no_br_cl: 534535000 sr_cl: TEC7534535000 sr_dash: sold: 10469.62 p_range: none type: standard act: 1 avo: 1 av: Color Grey Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Colour (manufacturer) Grey n: TEC7 X-Tack assembly and sealing sealant grey in cartridge (290 ml) - 534535000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description EXTREME MOUNTING WITHOUT SUPPORT Extreme initial tack Vibration and impact resistant Also on wet surfaces Perfect for vertical applications Super strong before curing: 600kg/m² Stable in adhesive thicknesses up to 40 mm Permanently elastic Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between -10°C and +40°C Apply to clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay When mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, so DO NOT SMOOTH DOWN When applying, position the nozzle vertically on the surface Easiest to spray with the Tec7 Multigun The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots) ds: dsc: kts: assembly and sealing sealant grey in cartridge (290 ml) kpn: X-Tack kpn_dash: X kpn_clear: XTack bkpn: TEC7 X-Tack bkpn_clear: TEC7 XTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 534535000 sr_ns: TEC7534535000
r: 02313734 p: 8.16 pid: 155943 b: TEC7 q: 37 st: 1 lt: 1 ean: 5414195670057 sr: TEC7 670005000 sr_no_br: 670005000 sr_no_br_cl: 670005000 sr_cl: TEC7670005000 sr_dash: sold: 8608.8 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml Conseils de prudence (P) P101; P102; P210; P211; P251; P308 + P313; P405; P410 + P412; P501 Relative density 1,17 ADR packing group ADR class 2 UN number UN1950 Principal hazard property GHS02 Flammable Number of components 1 H-statements H222; H229; H315; H317; H319; H332; H334; H335; H351; H373 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Packaging Spray can Based on Polyurethane Fire resistant No n: TEC7 PUR Pro insulation and mounting foam (750 ml) - 670005000 cn: PU FOAM cn2: PU FOAM cn_clear: PUFOAM d: Product description INSULATION AND MOUNTING FOAM Clean and precise with gun Fire retardancy class B1 Maximum expansion after application of 20% Minimum expansion pressure Usable at -10°C to +30°C Rot-resistant PUR Pro is a B1 PU foam within the German standard DIN4102, for use with a Pur gun, for assembly, filling, sealing, insulation, prevention of cold and sound bridges, etc. PUR Pro adheres to most building materials and is easily workable: painting, gluing, plastering, ... Instructions As of 24 August 2023, appropriate training must be completed for industrial or professional use Shake well before use (in case of reverse use, shake can during application for smooth flow) Protect adjacent surfaces Apply to clean and stable substrate Slightly moistening the substrate promotes adhesion and shortens the curing time Bring PUR to room temperature before use An opened container can be kept for several weeks if PU foam at the outlet ensures sealing Clean freshly spilt PUR with PUR Cleaner Clean hands with Powerwipes Remove hardened residues with Remove All Store upright and clamp for transport ds: dsc: kts: insulation and mounting foam (750 ml) kpn: PUR Pro kpn_dash: kpn_clear: PURPro bkpn: TEC7 PUR Pro bkpn_clear: TEC7 PURPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 pu foam | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Pu foam sr_no_br_cl_ns: 670005000 sr_ns: TEC7670005000
r: 02786125 p: 6.31 pid: 154894 b: TEC7 q: 112 st: 1 lt: 1 ean: 5414195002926 sr: TEC7 528008000 sr_no_br: 528008000 sr_no_br_cl: 528008000 sr_cl: TEC7528008000 sr_dash: sold: 6038.67 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Transparent Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro transparent sealant (310 ml) - 528008000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: transparent sealant (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528008000 sr_ns: TEC7528008000
r: 11990108 p: 9.33 pid: 156337 b: TEC7 q: 7 st: 1 lt: 1 ean: 5414195535967 sr: TEC7 535906000 sr_no_br: 535906000 sr_no_br_cl: 535906000 sr_cl: TEC7535906000 sr_dash: sold: 3172.2 p_range: none type: standard act: 1 avo: 1 av: Color Beige EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Beige n: TEC7 535906000 all-purpose adhesive beige RAL 1015 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all-purpose adhesive beige RAL 1015 in cartridge (310 ml) kpn: 535906000 kpn_dash: kpn_clear: 535906000 bkpn: TEC7 535906000 bkpn_clear: TEC7 535906000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535906000 sr_ns: TEC7535906000
r: 11992464 p: 9.33 pid: 155732 b: TEC7 q: 10 st: 1 lt: 1 ean: 5414195535462 sr: TEC7 535406000 sr_no_br: 535406000 sr_no_br_cl: 535406000 sr_cl: TEC7535406000 sr_dash: sold: 2976.27 p_range: none type: standard act: 1 avo: 1 av: Color Brown EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Brown n: TEC7 535406000 all purpose adhesive brown RAL 8017 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive brown RAL 8017 in cartridge (310 ml) kpn: 535406000 kpn_dash: kpn_clear: 535406000 bkpn: TEC7 535406000 bkpn_clear: TEC7 535406000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535406000 sr_ns: TEC7535406000
r: 02313579 p: 9.13 pid: 154777 b: TEC7 q: 0 st: lt: 8 ean: 5414195539064 sr: TEC7 539006000 sr_no_br: 539006000 sr_no_br_cl: 539006000 sr_cl: TEC7539006000 sr_dash: sold: 2912.47 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 Relative density 1 ADR packing group ADR class UN number Colour (manufacturer) Transparent Physical state Solid Flash point 65 °C Fire resistant No Packaging Cartridge Repaintable No n: TEC7 ROCK flexible sealant and adhesive for natural stone and swimming pool semi-transparent (310 ml) - 539006000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description FLEXIBLE SEALANT AND ADHESIVE FOR STONE, GLASS, SWIMMING POOL AND SANITARY FACILITIES High chemical resistance Mould- and bacteria-resistant Free of MEKO, phthalates, solvents and isocyanates No bleeding or staining Strong adhesion and permanently flexible Almost odourless, no bleeding through and no staining Safe application indoors and outdoors, also on damp, non-porous substrates Adheres without primer to most materials and is chlorine- and seawater-resistant after 7 days Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Test the adhesion on plastics, powder paints, exotic woods and bituminous materials. Reinforce weak and/or porous substrates first with Poxy Primer Swimming pool application: allow to cure for at least 7 days before contact with chlorinated water Ideal adhesive thickness for optimal bonding strength: 3 mm Consumption for jointing and sealing: Joint relationship: Joint width in mm: 5 10 15 20 25 Joint depth in mm: 5 6 10 10 If necessary, level the joint with convex backfilling ds: dsc: kts: flexible sealant and adhesive for natural stone and swimming pool semi-transparent (310 ml) kpn: ROCK kpn_dash: kpn_clear: ROCK bkpn: TEC7 ROCK bkpn_clear: TEC7 ROCK c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 539006000 sr_ns: TEC7539006000
r: 02786082 p: 6.31 pid: 154882 b: TEC7 q: 16 st: 1 lt: 1 ean: 5414195002780 sr: TEC7 528001000 sr_no_br: 528001000 sr_no_br_cl: 528001000 sr_cl: TEC7528001000 sr_dash: sold: 2719.61 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) White Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant white (310 ml) - 528001000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant white (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528001000 sr_ns: TEC7528001000
r: 02786119 p: 6.31 pid: 154890 b: TEC7 q: 21 st: 1 lt: 1 ean: 5414195002865 sr: TEC7 528005000 sr_no_br: 528005000 sr_no_br_cl: 528005000 sr_cl: TEC7528005000 sr_dash: sold: 2700.68 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Concrete grey Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant concrete grey (310 ml) - 528005000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant concrete grey (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528005000 sr_ns: TEC7528005000
r: 02786122 p: 6.31 pid: 156148 b: TEC7 q: 9 st: 1 lt: 1 ean: 5414195002902 sr: TEC7 528007000 sr_no_br: 528007000 sr_no_br_cl: 528007000 sr_cl: TEC7528007000 sr_dash: sold: 2637.58 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Grey/Transparent Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant transparent grey (310 ml) - 528007000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant transparent grey (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528007000 sr_ns: TEC7528007000
r: 02786117 p: 6.31 pid: 157047 b: TEC7 q: 5 st: 1 lt: 1 ean: 5414195002841 sr: TEC7 528004000 sr_no_br: 528004000 sr_no_br_cl: 528004000 sr_cl: TEC7528004000 sr_dash: sold: 2612.34 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Anthracite Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant anthracite (310 ml) - 528004000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant anthracite (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528004000 sr_ns: TEC7528004000
r: 02786100 p: 6.31 pid: 154886 b: TEC7 q: 19 st: 1 lt: 1 ean: 5414195002803 sr: TEC7 528002000 sr_no_br: 528002000 sr_no_br_cl: 528002000 sr_cl: TEC7528002000 sr_dash: sold: 2492.45 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Sanitary white Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant sanitary-white (310 ml) - 528002000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant sanitary-white (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528002000 sr_ns: TEC7528002000
r: 02786115 p: 6.31 pid: 156145 b: TEC7 q: 11 st: 1 lt: 1 ean: 5414195002827 sr: TEC7 528003000 sr_no_br: 528003000 sr_no_br_cl: 528003000 sr_cl: TEC7528003000 sr_dash: sold: 2252.67 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Black Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant black 310 ml - 528003000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant black 310 ml kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528003000 sr_ns: TEC7528003000
r: 02786129 p: 7.47 pid: 156375 b: TEC7 q: 6 st: 1 lt: 1 ean: 5414195002940 sr: TEC7 528009000 sr_no_br: 528009000 sr_no_br_cl: 528009000 sr_cl: TEC7528009000 sr_dash: sold: 2031.84 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 Relative density 1,48 ADR packing group ADR class UN number Colour (manufacturer) White Physical state Solid Fire resistant No Packaging Cartridge Repaintable Yes n: TEC7 XealPro sealant white paintable (310 ml) - 528009000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description SEAL EVERYTHING AND EVERYWHERE Extremely flexible and satin-coloured Adheres to most building materials, even wet ones Safe and mould-resistant Perfectly paintable Can be used indoors and outdoors Safe on all materials Bonds all larger surfaces Contains no harmful solvents, isocyanates or phthalates Up to 5 m² adhesive surface per can High glue strength: 15 kg/cm² Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Remove old sealants completely Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand-electric or air pistol Test adhesion to plastics such as PP, PE, silicones, powder paints, exotic woods and bituminous materials. If necessary, use PT7 as adhesive primer. Reinforce weak and/or porous substrates first with Poxy Primer Can be painted immediately after skin formation. Use paint or varnish according to the movement of the joint. Alkyd resin paints will cure delayed on uncured X-Seal Use Rock for permanent submersion, such as swimming pools ds: dsc: kts: sealant white paintable (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528009000 sr_ns: TEC7528009000
r: 02313313 p: 10.17 pid: 155294 b: TEC7 q: 23 st: 1 lt: 1 ean: 5414195537060 sr: TEC7 539706000 sr_no_br: 539706000 sr_no_br_cl: 539706000 sr_cl: TEC7539706000 sr_dash: sold: 1840.77 p_range: none type: standard act: 1 avo: 1 av: Color Colourless Relative density 1,08 ADR packing group ADR class UN number Net volume 310 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Crystal clear n: TEC7 Trans Inox sealant semi-transparent with stainless steel pigments (310 ml) - 539706000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description TRANSPARENT SEALANT WITH STAINLESS STEEL PIGMENTS Semitransparent Reflects the colour of substrates Masks cracks and colour transitions Super strong and permanently elastic after rapid curing Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Processing temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test the adhesion on plastics, powder paints, exotic woods and bituminous materials. Strengthen weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: sealant semi-transparent with stainless steel pigments (310 ml) kpn: Trans Inox kpn_dash: kpn_clear: TransInox bkpn: TEC7 Trans Inox bkpn_clear: TEC7 TransInox c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 539706000 sr_ns: TEC7539706000
r: 02313725 p: 6.98 pid: 154781 b: TEC7 q: 40 st: 1 lt: 1 ean: 5414195670019 sr: TEC7 670001000 sr_no_br: 670001000 sr_no_br_cl: 670001000 sr_cl: TEC7670001000 sr_dash: sold: 1661.24 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml Conseils de prudence (P) P101; P102; P210; P211; P251; P308 + P313; P405; P410 + P412; P501 ADR packing group ADR class 2 UN number UN1950 Principal hazard property GHS02 Flammable Number of components 1 H-statements H222; H229; H315; H317; H319; H332; H334; H335; H351; H373 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Packaging Spray can Fire class B3 - flammable Based on Polyurethane Fire resistant No n: TEC7 PUR insulation and mounting foam (750 ml) - 670001000 cn: PU FOAM cn2: PU FOAM cn_clear: PUFOAM d: Product description INSULATION AND MOUNTING FOAM Applicable 360° Minimal expansion pressure Usable at -10°C to +30°C Usable at -10°C to +30°C Rot-resistant Long shelf life, even when opened Ready-to-use PUR foam for assembly, filling, sealing, insulation, prevention of cold and sound bridges, ... Instructions As of 24 August 2023, appropriate training must be completed for industrial or professional use Shake well before use (for reversed use canister, shake during application for smooth flow) Protect adjacent surfaces Apply to clean and stable substrate Slightly moistening the substrate promotes adhesion and shortens the curing time Bring PUR to room temperature before use An opened container can be kept for several weeks if PU foam at the outlet ensures sealing Clean freshly spilt PUR with PUR Cleaner Clean hands with Powerwipes Remove hardened residues with Remove All Store upright and clamp for transport ds: dsc: kts: insulation and mounting foam (750 ml) kpn: PUR kpn_dash: kpn_clear: PUR bkpn: TEC7 PUR bkpn_clear: TEC7 PUR c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 pu foam | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Pu foam sr_no_br_cl_ns: 670001000 sr_ns: TEC7670001000
