Invisible sealing with TEC7
- Crystal clear seamless finish: You achieve completely invisible joints and bonds on glass, mirrors, and natural stone without staining.
- Adhesion on wet surfaces: You repair and seal reliably in humid conditions thanks to the waterproof, mould-resistant formulation.
- Permanently elastic and paintable: You absorb substrate vibrations without shrinkage and paint directly over cured joints with standard lacquers.
With TEC7 Trans Clear, you achieve completely invisible bonds and seals. This crystal-clear universal adhesive and sealant adheres firmly to various materials such as glass, mirrors, wood, tiles, and concrete. Free from solvents and isocyanates, it protects mirror coatings and will not stain natural stone. The formulation adheres reliably even to damp surfaces, allowing you to seal joints in kitchens and bathrooms without delay. The cured bead remains permanently elastic, resists mould, and absorbs vibrations without shrinkage. It can also be painted over for a seamless finish. Replace screws and nails with this practical 310 ml cartridge for clean, dependable mounting and sealing.
Product description
TRANSPARENT UNIVERSAL SEALANT
- Also adheres to wet substrates
- Mould- and bacteria-resistant
- Super strong and permanently elastic after rapid curing
- Free of solvents and isocyanates
- Safe on mirrors, no marking on natural stone
- Almost odourless
- Also on damp, smooth surfaces
- Mould- and bacteria-resistant
- Water- and airtight
- Can be used on most building materials
Instructions
- Processing temperature between +5°C and +40°C
- Apply on clean, dust- and grease-free substrates
- Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
- Apply with hand or air pistol (best with telescopic piston)
- Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended
- Test adhesion to plastics, powdered paints, exotic woods and bituminous materials
- Reinforce weak and/or porous substrates first with Poxy Primer
- Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process
- For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation
- Ideal adhesive thickness for optimal bonding strength: 3 mm
