TEC7 X-Tack assembly and sealing sealant white in cartridge (290 ml) - 534525000

Name: TEC7 X-Tack assembly and sealing sealant white in cartridge (290 ml) - 534525000
Brand: TEC7
SKU: 02313572
Price: 14.06 EUR
Availability: InStock

From 1 piece €14.06

From 12 pieces €13.36 - €8.44 saving

From 24 pieces €13.01 - €25.31 saving

From 36 pieces €12.65 - €50.62 saving

14.06 tax incl.

€11.62 excl. VAT (incl. all environmental contributions)

TEC7 X-Tack assembly and sealing sealant white in cartridge (290 ml) - 534525000

€14.06

On stock, immediately available.

each

Ordered before 20:00 - delivered as of 15/05/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL

Product information
Additional info

Product description

EXTREME MOUNTING WITHOUT SUPPORT

Extreme initial tack
Vibration and impact resistant
Also on wet substrates
Perfect for vertical applications
Super strong before curing: 600kg/m²
Stable in adhesive thicknesses up to 40 mm
Permanently elastic
Free of phthalates, solvents and isocyanates
Safe on mirrors, no marking on natural stone
Almost odourless
Also on damp, smooth surfaces
Mould- and bacteria-resistant
Water- and airtight
Can be used on most building materials

Instructions

Application temperature between -10°C and +40°C
Apply to clean, dust- and grease-free substrates
Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
Apply with hand or air pistol (best with telescopic piston)
Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended
Test adhesion to plastics, powdered paints, exotic woods and bituminous materials
Reinforce weak and/or porous substrates first with Poxy Primer
Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay
When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation
When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation.
The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN
When applying, position the nozzle vertically on the surface
Easiest to spray with the Tec7 Multigun
The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots)

Key features according to our expert