Versatile bonding with TEC7
- Adhesion on wet surfaces: You mount and seal directly onto both dry and damp substrates without sacrificing bond strength.
- Permanently flexible joint protection: The formula absorbs structural movements and vibrations easily, preventing cracks from forming over time.
- Safe for sensitive materials: Free from aggressive solvents, it does not damage natural stone, mirrors, or synthetic building components.
With the TEC7 535906000 all-purpose adhesive in beige ral 1015, you mount and seal with ease without needing screws or nails. This versatile ms polymer formula bonds directly to almost all building materials and works reliably on dry as well as damp surfaces, even curing underwater. Because it is free from aggressive solvents, it is safe to use on mirrors and natural stone without causing damage. The permanently flexible joint absorbs structural movement and vibrations to prevent cracks over time. Supplied in a practical 310 ml cartridge, it provides clean, waterproof results on panels, skirting boards, and sanitary fittings in a matching beige finish.
Product description
SEAL, BOND AND ASSEMBLE EVERYTHING
- Unique adhesion to almost all materials
- Very high bonding strength
- Fast strength build-up
- Cures up to -10°C
- Highest class in mould resistance
- Unique adhesion on difficult materials
- On dry and wet substrates
- Permanently elastic over the long term
- Highly UV-resistant and colourfast for indoor and outdoor use
- Safe on mirrors and insulation materials, no marking on natural stone
- Free of isocyanates, solvents and phthalates
- Water- and airtight
Instructions
- Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed
- Apply on clean, stable, dust- and grease-free substrates
- Use Tec7 Prepare & Finish for safe cleaning and a perfect finish
- In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
- Test the adhesion on plastics, powder paints, exotic woods and bituminous materials
- Reinforce weak and/or porous substrates first with Poxy Primer
- PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings
- Tec7 cures through a reaction with (air) moisture
- Use Tec7 in lines, not in thick dots. Dots will cure much more slowly
- When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly
- Use vertical glue strips to avoid moisture and dust accumulation
- Ideal adhesive thickness: 0.5 mm to 3 mm
- Thinner layers = higher strength, Thicker layers = higher elasticity
- Paintable after skin formation
- Do not use with alkyd-based lacquers and paints
- Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it.
