Product description:
- The fischer bolt anchor EXA is a particularly installation-friendly steel anchor with an internal thread for anchorings in non-cracked concrete.
- The two expansion clips increase the expansion range and reduce the torque slippage.
- In the stainless steel design, the bolt anchor with internal thread is suitable for the anchoring of railings, cantilevers, and cable trays outside.
- Thanks to the internal thread, threaded rods and metric screws for fixture anchoring can be installed and removed with a low amount of effort.
Advantages
- The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation.
- The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the fixture.
- The short version EXA K*) can be used in thinner components due to the low anchorage depth.
- *) not covered by technical approval
Applications
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Façades
Versions
Building materials
- Approved for:
- Concrete C20/25 to C50/60, non-cracked
- Also suitable for:
- Concrete C12/15
- Natural stone with dense structure
Functioning
- The EXA is suitable for pre-positioned and push-through installation.
- Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
- When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall.
- In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Key features according to our expert
-
Wire dimension: 6 mm
-
Overall length: 48 mm
-
Material: Steel
-
Surface treatment: Zinc plated
-
Drilling diameter: 8 mm
Specifications / All features
-
Brand:
FISCHER
-
87051263
-
EAN:
4048962115352
-
Supplier number:
FISCHER 512258
- Wire dimension
- 6 mm
- Overall length
- 48 mm
- Material
- Steel
- Surface treatment
- Zinc plated
- Drilling diameter
- 8 mm
- Min. screw-in depth
- 6 mm
- Remote mounting
- No
- Thread size (metric)
- 6 mm
- Max. screw-in depth
- 15 mm
- Front mounting
- Yes
- Wire
- M6
- Pierce fitting
- No
- Drill diameter
- 8 mm
- Min. borehole depth for front mounting
- 60 mm
