FISCHER EA II M10x40 weft anchor zinc plated - 48339

Name: FISCHER EA II M10x40 weft anchor zinc plated - 48339
Brand: FISCHER
SKU: 87990824
Price: 0.65 EUR
Availability: InStock

Supplier number: FISCHER 48339 | EAN 4006209483398

0.65 tax incl.

€0.54 excl. VAT (incl. all environmental contributions)

On stock - immediately available

The minimum purchase order quantity for the product is 50.

Ordered before 20:00 - delivered tomorrow 02/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL

✆ Talk to a specialist

Solid anchoring with Fischer EA II M10X40

Practical benefits

Flush and controlled setting: The pronounced collar prevents the sleeve from slipping too deep into the drill hole, ensuring you achieve a flush mount every time.
Standard metric internal thread: The M10 internal thread allows you to easily connect standard metric screws or threaded rods for versatile fastening in concrete.
Strong internal expansion hold: Driving in the internal cone expands the sleeve firmly against the wall of your 12 mm drill hole for lasting stability.

In a nutshell

The right choise for

With the Fischer ea II M10X40 hammerset anchor, you create a secure, flush fastening in solid concrete. Thanks to the pronounced collar, the sleeve will not slip too deep into the 12 MM drill hole, ensuring a clean and flush fit every time. The M10 internal thread provides full flexibility to mount and remove cable trays, pipework, or steel brackets using standard metric bolts and threaded rods. Driving in the internal cone expands the anchor firmly against the concrete wall. This zinc-plated version is the dependable solution for dry indoor installations.

Product information FAQ

€0.65

In stock - tax incl.

Key features according to our expert

Wire dimension: 10 mm
Drilling diameter: 12 mm

Product description

The internally threaded anchor with a rim for simple Hammerset installation.

The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.

Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve
Use of standard metric screws and threaded rods lowers complexity
Power-saving series installation with machine setting tool EA II S-SDS
Visual control due to embossing
ETA approval for non-cracked concrete and multiple fixings
The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation
The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use
The EMS machine setting tool allows for effortless installation, particularly in the case of series installations
The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety
Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded
The black fixing point prevents the anchor from falling out of the drill hole during overhead installation

Suitable for

The EA II is suitable for pre-positioned installation
Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer
The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall
The setting tools must sit on the rim of the anchor to ensure correct expansion

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Application

Pipelines and ventilation ducts
Sprinkler systems
Cable conduits and wires
Gratings
Steel constructions
Machines
Consoles
Shuttering props

All Features

Wire dimension: 10 mm
Drilling diameter: 12 mm
Remote mounting: No
Thread size (metric): 10 mm
Internal thread: M10
Min. borehole depth: 43 mm
Max. screw-in depth: 17 mm
Permissible load draw zone: 6.1 kN
Front mounting: Yes
Min. anchoring depth: 40 mm
Pierce fitting: No
Min. screw-in depth: 10 mm
Drill diameter: 12 mm
Anchor length: 40 mm
Material: electrolytically galvanised steel
Min. borehole depth for front mounting: 43 mm

Brand FISCHER
87990824
EAN 4006209483398
Supplier number FISCHER 48339

Frequently asked questions about this product

Answered by specialists

What drill bit diameter is required for this hammerset anchor?: You need a 12 mm drill diameter to install the anchor flush with the surface.
What screw or threaded rod size fits into this anchor?: The anchor features an M10 internal thread, suitable for standard metric M10 bolts and threaded rods.
Which base material is the Fischer EA II suitable for?: This hammerset anchor is engineered for solid fastenings in concrete.
How is the Fischer EA II hammerset anchor installed?: Drive the anchor flush into the drill hole with a hammer, then expand it using a Fischer EHS Plus or EMS setting tool.
Is this hammerset anchor suitable for outdoor use?: This zinc-plated version is intended for dry indoor applications.