r: 03030046 p: 24.062 pid: 89590 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A3S26I sr_no_br: 50A3S26I sr_no_br_cl: 50A3S26I sr_cl: RENOLD50A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 56,5 mm Product line Renold Blue Weight (kg/m) 2,96 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-3 Height 2,7 Inside width 9,4 mm Breaking strength 65400 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 50-3 No. 26 closing link plywood 5/8" - 50A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 5/8" kpn: BLUE 50-3 No. 26 kpn_dash: BLUE 50 kpn_clear: BLUE503No26 bkpn: RENOLD BLUE 50-3 No. 26 bkpn_clear: RENOLD BLUE503No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A3S26I sr_ns: RENOLD50A3S26I
r: 03030372 p: 23.564 pid: 87754 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A3S26I sr_no_br: 35A3S26I sr_no_br_cl: 35A3S26I sr_cl: RENOLD35A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 32,2 mm Product line Renold Blue Weight (kg/m) 0,93 kg/m Thickness (outer plate) 1,29 mm Type (ISO/ANSI) 35-3 Height 1,7 Inside width 4,68 mm Breaking strength 23700 N Diameter (pin) 3,59 mm Thickness (inner plate) 1,29 mm Plate height 8,6 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 35-3 No. 26 master link plywood 3/8" - 35A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: master link plywood 3/8" kpn: BLUE 35-3 No. 26 kpn_dash: BLUE 35 kpn_clear: BLUE353No26 bkpn: RENOLD BLUE 35-3 No. 26 bkpn_clear: RENOLD BLUE353No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 35A3S26I sr_ns: RENOLD35A3S26I
r: 03030578 p: 23.075 pid: 89701 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 06B2SNS26I sr_no_br: 06B2SNS26I sr_no_br_cl: 06B2SNS26I sr_cl: RENOLD06B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 23 mm Product line Renold Syno Weight (kg/m) 0,76 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-2 Height 1,1 Inside width 5,72 mm Breaking strength 16900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 06B-2 SN No. 26 master link duplex 3/8" - 06B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: master link duplex 3/8" kpn: SYNO 06B-2 SN No. 26 kpn_dash: SYNO 06B kpn_clear: SYNO06B2SNNo26 bkpn: RENOLD SYNO 06B-2 SN No. 26 bkpn_clear: RENOLD SYNO06B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 06B2SNS26I sr_ns: RENOLD06B2SNS26I
r: 03030586 p: 22.542 pid: 88146 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A1SNS26I sr_no_br: 60A1SNS26I sr_no_br_cl: 60A1SNS26I sr_cl: RENOLD60A1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 27 mm Product line Renold Syno Weight (kg/m) 1,73 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-1 Height 2,5 Inside width 12,57 mm Breaking strength 31300 N Diameter (pin) 5,95 mm Thickness (inner plate) 3,23 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 60-1 SN No. 26 closing link simplex 3/4" - 60A1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 3/4" kpn: SYNO 60-1 SN No. 26 kpn_dash: SYNO 60 kpn_clear: SYNO601SNNo26 bkpn: RENOLD SYNO 60-1 SN No. 26 bkpn_clear: RENOLD SYNO601SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A1SNS26I sr_ns: RENOLD60A1SNS26I
r: 03030396 p: 22.01 pid: 89672 b: RENOLD q: 0 st: lt: 15 ean: 6623901220403 sr: RENOLD 12B3S11I sr_no_br: 12B3S11I sr_no_br_cl: 12B3S11I sr_cl: RENOLD12B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 60,9 mm Product line Renold Blue Weight (kg/m) 3,59 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-3 Height 2,6 Inside width 11,68 mm Breaking strength 86700 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 12B-3 No. 11 closing link plywood 3/4" - 12B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 3/4" kpn: BLUE 12B-3 No. 11 kpn_dash: BLUE 12B kpn_clear: BLUE12B3No11 bkpn: RENOLD BLUE 12B-3 No. 11 bkpn_clear: RENOLD BLUE12B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B3S11I sr_ns: RENOLD12B3S11I
r: 03030045 p: 21.823 pid: 88047 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A3S26I sr_no_br: 40A3S26I sr_no_br_cl: 40A3S26I sr_cl: RENOLD40A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 45,1 mm Product line Renold Blue Weight (kg/m) 1,8 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-3 Height 2,1 Inside width 7,85 mm Breaking strength 41700 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 40-3 No. 26 closing link plywood 1/2" - 40A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1/2" kpn: BLUE 40-3 No. 26 kpn_dash: BLUE 40 kpn_clear: BLUE403No26 bkpn: RENOLD BLUE 40-3 No. 26 bkpn_clear: RENOLD BLUE403No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40A3S26I sr_ns: RENOLD40A3S26I
r: 03030579 p: 21.392 pid: 72961 b: RENOLD q: 0 st: lt: 15 ean: 0673766007783 sr: RENOLD 08B2SNS26I sr_no_br: 08B2SNS26I sr_no_br_cl: 08B2SNS26I sr_cl: RENOLD08B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,9 mm Product line Renold Syno Weight (kg/m) 1,4 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-2 Height 2 Inside width 7,75 mm Breaking strength 31100 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,81 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 08B-2 SN No. 26 connecting link duplex 1/2" - 08B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 1/2" kpn: SYNO 08B-2 SN No. 26 kpn_dash: SYNO 08B kpn_clear: SYNO08B2SNNo26 bkpn: RENOLD SYNO 08B-2 SN No. 26 bkpn_clear: RENOLD SYNO08B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B2SNS26I sr_ns: RENOLD08B2SNS26I
r: 02097244 p: 20.521 pid: 89534 b: RENOLD q: 0 st: lt: 15 ean: 6623901212095 sr: RENOLD 40A3S11I sr_no_br: 40A3S11I sr_no_br_cl: 40A3S11I sr_cl: RENOLD40A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 45,1 mm Product line Renold Blue Weight (kg/m) 1,8 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-3 Height 2,1 Inside width 7,85 mm Breaking strength 41700 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 40-3 No. 11 closing link plywood 1/2" - 40A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1/2" kpn: BLUE 40-3 No. 11 kpn_dash: BLUE 40 kpn_clear: BLUE403No11 bkpn: RENOLD BLUE 40-3 No. 11 bkpn_clear: RENOLD BLUE403No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40A3S11I sr_ns: RENOLD40A3S11I
r: 03030585 p: 19.579 pid: 88567 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A1SNS26I sr_no_br: 50A1SNS26I sr_no_br_cl: 50A1SNS26I sr_cl: RENOLD50A1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 21,1 mm Product line Renold Syno Weight (kg/m) 1,12 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-1 Height 2,5 Inside width 9,4 mm Breaking strength 21800 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,42 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 50-1 SN No. 26 connecting link simplex 5/8" - 50A1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link simplex 5/8" kpn: SYNO 50-1 SN No. 26 kpn_dash: SYNO 50 kpn_clear: SYNO501SNNo26 bkpn: RENOLD SYNO 50-1 SN No. 26 bkpn_clear: RENOLD SYNO501SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A1SNS26I sr_ns: RENOLD50A1SNS26I
r: 03030448 p: 19.334 pid: 88130 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A1SSS26I sr_no_br: 50A1SSS26I sr_no_br_cl: 50A1SSS26I sr_cl: RENOLD50A1SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 20,4 mm Product line Renold Stainless Steel Weight (kg/m) 1 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-1 Height 2,7 Inside width 9,4 mm Breaking strength 16810 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 50-1 No. 26 connecting link simplex 5/8" - 50A1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link simplex 5/8" kpn: stainless steel 50-1 No. 26 kpn_dash: stainless steel 50 kpn_clear: stainlesssteel501No26 bkpn: RENOLD stainless steel 50-1 No. 26 bkpn_clear: RENOLD stainlesssteel501No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A1SSS26I sr_ns: RENOLD50A1SSS26I
r: 03030097 p: 18.677 pid: 89589 b: RENOLD q: 5 st: 1 lt: 1 ean: 0673766009220 sr: RENOLD GY12B3S26I sr_no_br: GY12B3S26I sr_no_br_cl: GY12B3S26I sr_cl: RENOLDGY12B3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 60,9 mm Product line Renold Synergy Weight (kg/m) 3,59 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-3 Height 2,6 Inside width 11,68 mm Breaking strength 86700 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD closing link plywood 3/4" - GY12B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link plywood 3/4" kpn: SYNERGY 12B-3 S No. 26 kpn_dash: SYNERGY 12B kpn_clear: SYNERGY12B3SNo26 bkpn: RENOLD SYNERGY 12B-3 S No. 26 bkpn_clear: RENOLD SYNERGY12B3SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY12B3S26I sr_ns: RENOLDGY12B3S26I
r: 02097187 p: 18.212 pid: 70901 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A2S11I sr_no_br: 60A2S11I sr_no_br_cl: 60A2S11I sr_cl: RENOLD60A2S11I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 48,1 mm Product line Renold Blue Weight (kg/m) 2,91 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-2 Height 2,6 Inside width 12,57 mm Breaking strength 62600 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 60-2 No. 11 connecting link duplex 3/4" - 60A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 3/4" kpn: BLUE 60-2 No. 11 kpn_dash: BLUE 60 kpn_clear: BLUE602No11 bkpn: RENOLD BLUE 60-2 No. 11 bkpn_clear: RENOLD BLUE602No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A2S11I sr_ns: RENOLD60A2S11I
r: 03030019 p: 18.14 pid: 87653 b: RENOLD q: 0 st: lt: 15 ean: 0673766008896 sr: RENOLD 06B3S26I sr_no_br: 06B3S26I sr_no_br_cl: 06B3S26I sr_cl: RENOLD06B3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 33,3 mm Product line Renold Blue Weight (kg/m) 1,11 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-3 Height 1,3 Inside width 5,72 mm Breaking strength 24900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 06B-3 No. 26 master link plywood 3/8" - 06B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: master link plywood 3/8" kpn: BLUE 06B-3 No. 26 kpn_dash: BLUE 06B kpn_clear: BLUE06B3No26 bkpn: RENOLD BLUE 06B-3 No. 26 bkpn_clear: RENOLD BLUE06B3No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 06B3S26I sr_ns: RENOLD06B3S26I
r: 03030395 p: 17.964 pid: 88121 b: RENOLD q: 0 st: lt: 15 ean: 6623901339662 sr: RENOLD 10B3S11I sr_no_br: 10B3S11I sr_no_br_cl: 10B3S11I sr_cl: RENOLD10B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 52 mm Product line Renold Blue Weight (kg/m) 2,54 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-3 Height 2,5 Inside width 9,65 mm Breaking strength 66700 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 10B-3 No. 11 closing link plywood 5/8" - 10B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 5/8" kpn: BLUE 10B-3 No. 11 kpn_dash: BLUE 10B kpn_clear: BLUE10B3No11 bkpn: RENOLD BLUE 10B-3 No. 11 bkpn_clear: RENOLD BLUE10B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B3S11I sr_ns: RENOLD10B3S11I
r: 03030584 p: 17.205 pid: 88143 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1SNS26I sr_no_br: 40A1SNS26I sr_no_br_cl: 40A1SNS26I sr_cl: RENOLD40A1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,9 mm Product line Renold Syno Weight (kg/m) 0,67 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-1 Height 2 Inside width 7,85 mm Breaking strength 13900 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,76 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 40-1 SN No. 26 closing link simplex 1/2" - 40A1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 1/2" kpn: SYNO 40-1 SN No. 26 kpn_dash: SYNO 40 kpn_clear: SYNO401SNNo26 bkpn: RENOLD SYNO 40-1 SN No. 26 bkpn_clear: RENOLD SYNO401SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40A1SNS26I sr_ns: RENOLD40A1SNS26I
r: 03030136 p: 16.946 pid: 87692 b: RENOLD q: 0 st: lt: 9 ean: 6623901057993 sr: RENOLD 05B1SSS26I sr_no_br: 05B1SSS26I sr_no_br_cl: 05B1SSS26I sr_cl: RENOLD05B1SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 8 mm Length (pin) 8,6 mm Product line Renold Stainless Steel Weight (kg/m) 0,18 kg/m Thickness (outer plate) 0,76 mm Type (ISO/ANSI) 05B-1 Height 1,5 Inside width 3 mm Breaking strength 3200 N Diameter (pin) 2,31 mm Thickness (inner plate) 0,76 mm Plate height 7,11 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 05B-1 No. 26 connecting link simplex 5/16" - 05B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link simplex 5/16" kpn: stainless steel 05B-1 No. 26 kpn_dash: stainless steel 05B kpn_clear: stainlesssteel05B1No26 bkpn: RENOLD stainless steel 05B-1 No. 26 bkpn_clear: RENOLD stainlesssteel05B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 05B1SSS26I sr_ns: RENOLD05B1SSS26I
r: 03030020 p: 16.803 pid: 88036 b: RENOLD q: 0 st: lt: 15 ean: 0673766009008 sr: RENOLD 08B3S26I sr_no_br: 08B3S26I sr_no_br_cl: 08B3S26I sr_cl: RENOLD08B3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 44,3 mm Product line Renold Blue Weight (kg/m) 2,06 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-3 Height 2 Inside width 7,75 mm Breaking strength 44500 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 08B-3 No. 26 closing link plywood 1/2" - 08B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1/2" kpn: BLUE 08B-3 No. 26 kpn_dash: BLUE 08B kpn_clear: BLUE08B3No26 bkpn: RENOLD BLUE 08B-3 No. 26 bkpn_clear: RENOLD BLUE08B3No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B3S26I sr_ns: RENOLD08B3S26I
r: 02097170 p: 15.81 pid: 87606 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A2S11I sr_no_br: 50A2S11I sr_no_br_cl: 50A2S11I sr_cl: RENOLD50A2S11I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 38,4 mm Product line Renold Blue Weight (kg/m) 1,98 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-2 Height 2,7 Inside width 9,4 mm Breaking strength 43600 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 50-2 No. 11 connecting link duplex 5/8" - 50A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 5/8" kpn: BLUE 50-2 No. 11 kpn_dash: BLUE 50 kpn_clear: BLUE502No11 bkpn: RENOLD BLUE 50-2 No. 11 bkpn_clear: RENOLD BLUE502No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A2S11I sr_ns: RENOLD50A2S11I
r: 03030394 p: 15.8 pid: 88550 b: RENOLD q: 0 st: lt: 15 ean: 6623901273294 sr: RENOLD 08B3S11I sr_no_br: 08B3S11I sr_no_br_cl: 08B3S11I sr_cl: RENOLD08B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 44,3 mm Product line Renold Blue Weight (kg/m) 2,06 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-3 Height 2 Inside width 7,75 mm Breaking strength 44500 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 08B-3 No. 11 closing link plywood 1/2" - 08B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1/2" kpn: BLUE 08B-3 No. 11 kpn_dash: BLUE 08B kpn_clear: BLUE08B3No11 bkpn: RENOLD BLUE 08B-3 No. 11 bkpn_clear: RENOLD BLUE08B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B3S11I sr_ns: RENOLD08B3S11I
r: 03030023 p: 15.537 pid: 88362 b: RENOLD q: 5 st: 1 lt: 1 ean: 0673766009367 sr: RENOLD 16B3S26I sr_no_br: 16B3S26I sr_no_br_cl: 16B3S26I sr_cl: RENOLD16B3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 98,6 mm Product line Renold Blue Weight (kg/m) 8,15 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-3 Height 2,2 Inside width 17,02 mm Breaking strength 160000 N Diameter (pin) 8,28 mm Thickness (inner plate) 3,76 mm Plate height 21,08 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 16B-3 No. 26 closing link plywood 1" - 16B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1" kpn: BLUE 16B-3 No. 26 kpn_dash: BLUE 16B kpn_clear: BLUE16B3No26 bkpn: RENOLD BLUE 16B-3 No. 26 bkpn_clear: RENOLD BLUE16B3No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B3S26I sr_ns: RENOLD16B3S26I
