r: 03030140 p: 10.861 pid: 87694 b: RENOLD q: 23 st: 1 lt: 1 ean: 0673766038213 sr: RENOLD 08B1SSS26I sr_no_br: 08B1SSS26I sr_no_br_cl: 08B1SSS26I sr_cl: RENOLD08B1SSS26I sr_dash: sold: 65.166 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,5 mm Product line Renold Stainless Steel Weight (kg/m) 0,7 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-1 Height 2 Inside width 7,75 mm Breaking strength 12000 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 08B-1 No. 26 closing link simplex 1/2" - 08B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: closing link simplex 1/2" kpn: stainless steel 08B-1 No. 26 kpn_dash: stainless steel 08B kpn_clear: stainlesssteel08B1No26 bkpn: RENOLD stainless steel 08B-1 No. 26 bkpn_clear: RENOLD stainlesssteel08B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B1SSS26I sr_ns: RENOLD08B1SSS26I
r: 03030013 p: 8.58 pid: 88032 b: RENOLD q: 42 st: 1 lt: 1 ean: 0673766007004 sr: RENOLD 12B2S26I sr_no_br: 12B2S26I sr_no_br_cl: 12B2S26I sr_cl: RENOLD12B2S26I sr_dash: sold: 51.48 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 41,4 mm Product line Renold Blue Weight (kg/m) 2,42 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-2 Height 2,6 Inside width 11,68 mm Breaking strength 57800 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 12B-2 No. 26 connecting link duplex 3/4" - 12B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 3/4" kpn: BLUE 12B-2 No. 26 kpn_dash: BLUE 12B kpn_clear: BLUE12B2No26 bkpn: RENOLD BLUE 12B-2 No. 26 bkpn_clear: RENOLD BLUE12B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B2S26I sr_ns: RENOLD12B2S26I
r: 03030004 p: 3.55 pid: 89578 b: RENOLD q: 184 st: 1 lt: 1 ean: 0673766002269 sr: RENOLD 10B1S26I sr_no_br: 10B1S26I sr_no_br_cl: 10B1S26I sr_cl: RENOLD10B1S26I sr_dash: sold: 46.15 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 18,8 mm Product line Renold Blue Weight (kg/m) 0,96 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-1 Height 2,5 Inside width 9,65 mm Breaking strength 22200 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 10B-1 No. 26 connecting link simplex 5/8" - 10B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link simplex 5/8" kpn: BLUE 10B-1 No. 26 kpn_dash: BLUE 10B kpn_clear: BLUE10B1No26 bkpn: RENOLD BLUE 10B-1 No. 26 bkpn_clear: RENOLD BLUE10B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B1S26I sr_ns: RENOLD10B1S26I
r: 03030115 p: 4.09 pid: 89595 b: RENOLD q: 21 st: 1 lt: 1 ean: 6623901294930 sr: RENOLD 12B1S11I sr_no_br: 12B1S11I sr_no_br_cl: 12B1S11I sr_cl: RENOLD12B1S11I sr_dash: sold: 40.9 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 21,9 mm Product line Renold Blue Weight (kg/m) 1,22 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-1 Height 2,6 Inside width 11,68 mm Breaking strength 28900 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 12B-1 No. 11 closing link simplex 3/4" - 12B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 3/4" kpn: BLUE 12B-1 No. 11 kpn_dash: BLUE 12B kpn_clear: BLUE12B1No11 bkpn: RENOLD BLUE 12B-1 No. 11 bkpn_clear: RENOLD BLUE12B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B1S11I sr_ns: RENOLD12B1S11I
r: 03030003 p: 3.12 pid: 88025 b: RENOLD q: 99 st: 1 lt: 1 ean: 0673766001576 sr: RENOLD 08B1S26I sr_no_br: 08B1S26I sr_no_br_cl: 08B1S26I sr_cl: RENOLD08B1S26I sr_dash: sold: 37.44 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,5 mm Product line Renold Blue Weight (kg/m) 0,7 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-1 Height 2 Inside width 7,75 mm Breaking strength 17800 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 08B-1 No. 26 closing link simplex 1/2" - 08B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1/2" kpn: BLUE 08B-1 No. 26 kpn_dash: BLUE 08B kpn_clear: BLUE08B1No26 bkpn: RENOLD BLUE 08B-1 No. 26 bkpn_clear: RENOLD BLUE08B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B1S26I sr_ns: RENOLD08B1S26I
r: 03030029 p: 7.03 pid: 72949 b: RENOLD q: 38 st: 1 lt: 1 ean: 6623900532323 sr: RENOLD 40A1S26I sr_no_br: 40A1S26I sr_no_br_cl: 40A1S26I sr_cl: RENOLD40A1S26I sr_dash: sold: 35.15 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,4 mm Product line Renold Blue Weight (kg/m) 0,6 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-1 Height 2,1 Inside width 7,85 mm Breaking strength 13900 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 40-1 No. 26 closing link simplex 1/2" - 40A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1/2" kpn: BLUE 40-1 No. 26 kpn_dash: BLUE 40 kpn_clear: BLUE401No26 bkpn: RENOLD BLUE 40-1 No. 26 bkpn_clear: RENOLD BLUE401No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40A1S26I sr_ns: RENOLD40A1S26I
r: 03030090 p: 8.595 pid: 89596 b: RENOLD q: 99 st: 1 lt: 1 ean: 0673766006434 sr: RENOLD GY06B2S26I sr_no_br: GY06B2S26I sr_no_br_cl: GY06B2S26I sr_cl: RENOLDGY06B2S26I sr_dash: sold: 34.38 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 23 mm Product line Renold Synergy Weight (kg/m) 0,78 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) O6B-2 Height 1,3 Inside width 5,72 mm Breaking strength 16900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD master link duplex 3/8" - GY06B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: master link duplex 3/8" kpn: SYNERGY 06B-2 S No. 26 kpn_dash: SYNERGY 06B kpn_clear: SYNERGY06B2SNo26 bkpn: RENOLD SYNERGY 06B-2 S No. 26 bkpn_clear: RENOLD SYNERGY06B2SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY06B2S26I sr_ns: RENOLDGY06B2S26I
r: 03030088 p: 8.16 pid: 88381 b: RENOLD q: 38 st: 1 lt: 1 ean: 0673766002870 sr: RENOLD GY12B1S26I sr_no_br: GY12B1S26I sr_no_br_cl: GY12B1S26I sr_cl: RENOLDGY12B1S26I sr_dash: sold: 32.64 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 21,9 mm Product line Renold Synergy Weight (kg/m) 1,22 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-1 Height 2,6 Inside width 11,68 mm Breaking strength 28900 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 12B-1 S No. 26 closing link simplex 3/4" - GY12B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 3/4" kpn: SYNERGY 12B-1 S No. 26 kpn_dash: SYNERGY 12B kpn_clear: SYNERGY12B1SNo26 bkpn: RENOLD SYNERGY 12B-1 S No. 26 bkpn_clear: RENOLD SYNERGY12B1SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY12B1S26I sr_ns: RENOLDGY12B1S26I
r: 03030006 p: 4.793 pid: 88347 b: RENOLD q: 35 st: 1 lt: 1 ean: 0673766003402 sr: RENOLD 16B1S26I sr_no_br: 16B1S26I sr_no_br_cl: 16B1S26I sr_cl: RENOLD16B1S26I sr_dash: sold: 28.758 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 34,9 mm Product line Renold Blue Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-1 Height 2,2 Inside width 17,02 mm Breaking strength 60000 N Diameter (pin) 8,28 mm Thickness (inner plate) 4,12 mm Plate height 21,08 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 16B-1 No. 26 closing link simplex 1" - 16B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1" kpn: BLUE 16B-1 No. 26 kpn_dash: BLUE 16B kpn_clear: BLUE16B1No26 bkpn: RENOLD BLUE 16B-1 No. 26 bkpn_clear: RENOLD BLUE16B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B1S26I sr_ns: RENOLD16B1S26I
r: 03030005 p: 4.09 pid: 89581 b: RENOLD q: 41 st: 1 lt: 1 ean: 0673766002856 sr: RENOLD 12B1S26I sr_no_br: 12B1S26I sr_no_br_cl: 12B1S26I sr_cl: RENOLD12B1S26I sr_dash: sold: 28.63 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 21,9 mm Product line Renold Blue Weight (kg/m) 1,22 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-1 Height 2,6 Inside width 11,68 mm Breaking strength 28900 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 12B-1 No. 26 closing link simplex 3/4" - 12B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 3/4" kpn: BLUE 12B-1 No. 26 kpn_dash: BLUE 12B kpn_clear: BLUE12B1No26 bkpn: RENOLD BLUE 12B-1 No. 26 bkpn_clear: RENOLD BLUE12B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B1S26I sr_ns: RENOLD12B1S26I
r: 03030031 p: 5.31 pid: 89566 b: RENOLD q: 19 st: 1 lt: 1 ean: 6623900536505 sr: RENOLD 60A1S26I sr_no_br: 60A1S26I sr_no_br_cl: 60A1S26I sr_cl: RENOLD60A1S26I sr_dash: sold: 26.55 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 25,3 mm Product line Renold Blue Weight (kg/m) 1,47 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-1 Height 2,6 Inside width 12,57 mm Breaking strength 31300 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 60-1 No. 26 closing link simplex 3/4" - 60A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 3/4" kpn: BLUE 60-1 No. 26 kpn_dash: BLUE 60 kpn_clear: BLUE601No26 bkpn: RENOLD BLUE 60-1 No. 26 bkpn_clear: RENOLD BLUE601No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A1S26I sr_ns: RENOLD60A1S26I
r: 03030087 p: 7.09 pid: 87675 b: RENOLD q: 19 st: 1 lt: 1 ean: 0673766002283 sr: RENOLD GY10B1S26I sr_no_br: GY10B1S26I sr_no_br_cl: GY10B1S26I sr_cl: RENOLDGY10B1S26I sr_dash: sold: 21.27 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 16 mm Product line Renold Synergy Weight (kg/m) 0,81 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-1 Height 2,5 Inside width 6,48 mm Breaking strength 22200 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 10B-1 S No. 26 connecting link simplex 5/8" - GY10B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link simplex 5/8" kpn: SYNERGY 10B-1 S No. 26 kpn_dash: SYNERGY 10B kpn_clear: SYNERGY10B1SNo26 bkpn: RENOLD SYNERGY 10B-1 S No. 26 bkpn_clear: RENOLD SYNERGY10B1SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY10B1S26I sr_ns: RENOLDGY10B1S26I
r: 03030002 p: 3.35 pid: 89576 b: RENOLD q: 42 st: 1 lt: 1 ean: 0673766000975 sr: RENOLD 06B1S26I sr_no_br: 06B1S26I sr_no_br_cl: 06B1S26I sr_cl: RENOLD06B1S26I sr_dash: sold: 13.4 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 12,5 mm Product line Renold Blue Weight (kg/m) 0,39 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-1 Height 1,3 Inside width 5,72 mm Breaking strength 8900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 06B-1 No. 26 closing link simplex 3/8" - 06B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 3/8" kpn: BLUE 06B-1 No. 26 kpn_dash: BLUE 06B kpn_clear: BLUE06B1No26 bkpn: RENOLD BLUE 06B-1 No. 26 bkpn_clear: RENOLD BLUE06B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 06B1S26I sr_ns: RENOLD06B1S26I
r: 03030116 p: 5.619 pid: 88061 b: RENOLD q: 20 st: 1 lt: 1 ean: 0673766036868 sr: RENOLD 16B1S11I sr_no_br: 16B1S11I sr_no_br_cl: 16B1S11I sr_cl: RENOLD16B1S11I sr_dash: sold: 11.238 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 34,9 mm Product line Renold Blue Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-1 Height 2,2 Inside width 17,02 mm Breaking strength 60000 N Diameter (pin) 8,28 mm Thickness (inner plate) 4,12 mm Plate height 21,08 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 16B-1 No. 11 closing link simplex 1" - 16B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1" kpn: BLUE 16B-1 No. 11 kpn_dash: BLUE 16B kpn_clear: BLUE16B1No11 bkpn: RENOLD BLUE 16B-1 No. 11 bkpn_clear: RENOLD BLUE16B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B1S11I sr_ns: RENOLD16B1S11I
r: 03030022 p: 5.619 pid: 88040 b: RENOLD q: 6 st: 1 lt: 1 ean: 0673766009206 sr: RENOLD 12B3S26I sr_no_br: 12B3S26I sr_no_br_cl: 12B3S26I sr_cl: RENOLD12B3S26I sr_dash: sold: 11.238 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 60,9 mm Product line Renold Blue Weight (kg/m) 3,59 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-3 Height 2,6 Inside width 11,68 mm Breaking strength 86700 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 12B-3 No. 26 closing link plywood 3/4" - 12B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 3/4" kpn: BLUE 12B-3 No. 26 kpn_dash: BLUE 12B kpn_clear: BLUE12B3No26 bkpn: RENOLD BLUE 12B-3 No. 26 bkpn_clear: RENOLD BLUE12B3No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B3S26I sr_ns: RENOLD12B3S26I
r: 03030174 p: 9.91 pid: 88410 b: RENOLD q: 24 st: 1 lt: 1 ean: 6623901217588 sr: RENOLD 05B1S26I sr_no_br: 05B1S26I sr_no_br_cl: 05B1S26I sr_cl: RENOLD05B1S26I sr_dash: sold: 9.91 p_range: none type: standard act: 1 avo: 1 av: Pitch 8 mm Length (pin) 8,6 mm Product line Renold Blue Weight (kg/m) 0,18 kg/m Thickness (outer plate) 0,76 mm Type (ISO/ANSI) 05B-1 Height 1,5 Inside width 3 mm Breaking strength 4400 N Diameter (pin) 2,31 mm Thickness (inner plate) 0,76 mm Plate height 7,11 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 05B-1 No. 26 connecting link simplex 5/16" - 05B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link simplex 5/16" kpn: BLUE 05B-1 No. 26 kpn_dash: BLUE 05B kpn_clear: BLUE05B1No26 bkpn: RENOLD BLUE 05B-1 No. 26 bkpn_clear: RENOLD BLUE05B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 05B1S26I sr_ns: RENOLD05B1S26I
r: 03030141 p: 4.917 pid: 89598 b: RENOLD q: 13 st: 1 lt: 1 ean: 0673766020072 sr: RENOLD 10B1SSS26I sr_no_br: 10B1SSS26I sr_no_br_cl: 10B1SSS26I sr_cl: RENOLD10B1SSS26I sr_dash: sold: 9.834 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 18,8 mm Product line Renold Stainless Steel Weight (kg/m) 0,96 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-1 Height 2,5 Inside width 9,65 mm Breaking strength 14700 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD connecting link simplex 5/8" - 10B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link simplex 5/8" kpn: stainless steel 10B-1 No. 26 kpn_dash: stainless steel 10B kpn_clear: stainlesssteel10B1No26 bkpn: RENOLD stainless steel 10B-1 No. 26 bkpn_clear: RENOLD stainlesssteel10B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B1SSS26I sr_ns: RENOLD10B1SSS26I
r: 03030091 p: 8.925 pid: 71515 b: RENOLD q: 0 st: lt: 14 ean: 0673766006595 sr: RENOLD GY08B2S26I sr_no_br: GY08B2S26I sr_no_br_cl: GY08B2S26I sr_cl: RENOLDGY08B2S26I sr_dash: sold: 8.925 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,4 mm Product line Renold Synergy Weight (kg/m) 1,38 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-2 Height 2 Inside width 7,75 mm Breaking strength 31100 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD connecting link duplex 1/2" - GY08B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1/2" kpn: SYNERGY 08B-2 S No. 26 kpn_dash: SYNERGY 08B kpn_clear: SYNERGY08B2SNo26 bkpn: RENOLD SYNERGY 08B-2 S No. 26 bkpn_clear: RENOLD SYNERGY08B2SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY08B2S26I sr_ns: RENOLDGY08B2S26I
r: 03030086 p: 6.24 pid: 89583 b: RENOLD q: 59 st: 1 lt: 1 ean: 0673766001590 sr: RENOLD GY08B1S26I sr_no_br: GY08B1S26I sr_no_br_cl: GY08B1S26I sr_cl: RENOLDGY08B1S26I sr_dash: sold: 6.24 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,5 mm Product line Renold Synergy Weight (kg/m) 0,7 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-1 Height 2 Inside width 7,75 mm Breaking strength 17800 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 08B-1 S No. 26 closing link simplex 1/2" - GY08B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1/2" kpn: SYNERGY 08B-1 S No. 26 kpn_dash: SYNERGY 08B kpn_clear: SYNERGY08B1SNo26 bkpn: RENOLD SYNERGY 08B-1 S No. 26 bkpn_clear: RENOLD SYNERGY08B1SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY08B1S26I sr_ns: RENOLDGY08B1S26I
r: 03030202 p: 5.88 pid: 88417 b: RENOLD q: 17 st: 1 lt: 1 ean: 0673766005499 sr: RENOLD 111046S26I sr_no_br: 111046S26I sr_no_br_cl: 111046S26I sr_cl: RENOLD111046S26I sr_dash: sold: 5.88 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 11,4 mm Product line Renold Synergy Weight (kg/m) 0,35 kg/m Thickness (outer plate) 0,98 mm Height 2 Inside width 4,88 mm Breaking strength 8900 N Diameter (pin) 4,09 mm Thickness (inner plate) 1,13 mm Plate height 9,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 080-1 S No. 26 closing link simplex 1/2" - 111046S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1/2" kpn: SYNERGY 080-1 S No. 26 kpn_dash: SYNERGY 080 kpn_clear: SYNERGY0801SNo26 bkpn: RENOLD SYNERGY 080-1 S No. 26 bkpn_clear: RENOLD SYNERGY0801SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 111046S26I sr_ns: RENOLD111046S26I
