r: 03030121 p: 117.69 pid: 88069 b: RENOLD q: 0 st: lt: 15 ean: 0673766037094 sr: RENOLD 20B3S11I sr_no_br: 20B3S11I sr_no_br_cl: 20B3S11I sr_cl: RENOLD20B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 113,2 mm Product line Renold Blue Weight (kg/m) 11,65 kg/m Thickness (outer plate) 3,61 mm Type (ISO/ANSI) 20B-3 Height 2,7 Inside width 19,56 mm Breaking strength 250000 N Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 20B-3 No. 11 closing link plywood 1 1/4" - 20B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1 1/4" kpn: BLUE 20B-3 No. 11 kpn_dash: BLUE 20B kpn_clear: BLUE20B3No11 bkpn: RENOLD BLUE 20B-3 No. 11 bkpn_clear: RENOLD BLUE20B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 20B3S11I sr_ns: RENOLD20B3S11I
r: 03030292 p: 113.287 pid: 87749 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY80A2S11I sr_no_br: GY80A2S11I sr_no_br_cl: GY80A2S11I sr_cl: RENOLDGY80A2S11I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Synergy Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD SYNERGY 80-2 S No. 11 connecting link duplex 1" - GY80A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1" kpn: SYNERGY 80-2 S No. 11 kpn_dash: SYNERGY 80 kpn_clear: SYNERGY802SNo11 bkpn: RENOLD SYNERGY 80-2 S No. 11 bkpn_clear: RENOLD SYNERGY802SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY80A2S11I sr_ns: RENOLDGY80A2S11I
r: 02096875 p: 107.677 pid: 88322 b: RENOLD q: 0 st: lt: 15 ean: 6623900526483 sr: RENOLD 120A1S11I sr_no_br: 120A1S11I sr_no_br_cl: 120A1S11I sr_cl: RENOLD120A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 49,3 mm Product line Renold Blue Weight (kg/m) 5,7 kg/m Thickness (outer plate) 4,8 mm Type (ISO/ANSI) 120-1 Height 5,3 Inside width 25,23 mm Breaking strength 125000 N Diameter (pin) 11,11 mm Thickness (inner plate) 4,8 mm Plate height 36,2 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 120-1 No. 11 closing link simplex 1 1/2" - 120A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 1/2" kpn: BLUE 120-1 No. 11 kpn_dash: BLUE 120 kpn_clear: BLUE1201No11 bkpn: RENOLD BLUE 120-1 No. 11 bkpn_clear: RENOLD BLUE1201No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 120A1S11I sr_ns: RENOLD120A1S11I
r: 03030034 p: 101.25 pid: 88368 b: RENOLD q: 0 st: lt: 15 ean: 0673766013203 sr: RENOLD 120A1S58I sr_no_br: 120A1S58I sr_no_br_cl: 120A1S58I sr_cl: RENOLD120A1S58I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 49,3 mm Product line Renold Blue Weight (kg/m) 5,7 kg/m Thickness (outer plate) 4,8 mm Type (ISO/ANSI) 120-1 Height 5,3 Inside width 25,23 mm Breaking strength 125000 N Diameter (pin) 11,11 mm Thickness (inner plate) 4,8 mm Plate height 36,2 mm Number of the connecting link 58 Version (link) Simplex n: RENOLD BLUE 120-1 No. 58 closing link simplex 1 1/2" - 120A1S58I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 1/2" kpn: BLUE 120-1 No. 58 kpn_dash: BLUE 120 kpn_clear: BLUE1201No58 bkpn: RENOLD BLUE 120-1 No. 58 bkpn_clear: RENOLD BLUE1201No58 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 120A1S58I sr_ns: RENOLD120A1S58I
r: 02097199 p: 97.363 pid: 87610 b: RENOLD q: 0 st: lt: 15 ean: 6623900524427 sr: RENOLD 100A2S11I sr_no_br: 100A2S11I sr_no_br_cl: 100A2S11I sr_cl: RENOLD100A2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 75,4 mm Product line Renold Blue Weight (kg/m) 8,4 kg/m Thickness (outer plate) 4,06 mm Type (ISO/ANSI) 100-2 Height 4,2 Inside width 18,9 mm Breaking strength 174000 N Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 100-2 No. 11 connecting link duplex 1 1/4" - 100A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1 1/4" kpn: BLUE 100-2 No. 11 kpn_dash: BLUE 100 kpn_clear: BLUE1002No11 bkpn: RENOLD BLUE 100-2 No. 11 bkpn_clear: RENOLD BLUE1002No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 100A2S11I sr_ns: RENOLD100A2S11I
r: 03030285 p: 92.73 pid: 89690 b: RENOLD q: 0 st: lt: 15 ean: 0673766043040 sr: RENOLD GY100A1S11I sr_no_br: GY100A1S11I sr_no_br_cl: GY100A1S11I sr_cl: RENOLDGY100A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 39,7 mm Product line Renold Synergy Weight (kg/m) 4,2 kg/m Thickness (outer plate) 4,06 mm Type (ISO/ANSI) 100-1 Height 4,2 Inside width 18,9 mm Breaking strength 87000 N Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD SYNERGY 100-1 S No. 11 closing link simplex 1 1/4" - GY100A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1 1/4" kpn: SYNERGY 100-1 S No. 11 kpn_dash: SYNERGY 100 kpn_clear: SYNERGY1001SNo11 bkpn: RENOLD SYNERGY 100-1 S No. 11 bkpn_clear: RENOLD SYNERGY1001SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY100A1S11I sr_ns: RENOLDGY100A1S11I
r: 03030194 p: 91.694 pid: 89608 b: RENOLD q: 5 st: 1 lt: 1 ean: 0673766040933 sr: RENOLD GY24B2S11I sr_no_br: GY24B2S11I sr_no_br_cl: GY24B2S11I sr_cl: RENOLDGY24B2S11I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 101,3 mm Product line Renold Synergy Weight (kg/m) 14,8 kg/m Thickness (outer plate) 5,08 mm Type (ISO/ANSI) 24B-2 Height 6,8 Inside width 25,4 mm Breaking strength 280000 N Diameter (pin) 14,63 mm Thickness (inner plate) 6,1 mm Plate height 33,4 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD SYNERGY 24B-2 S No. 11 connecting link duplex 1 1/2" - GY24B2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1 1/2" kpn: SYNERGY 24B-2 S No. 11 kpn_dash: SYNERGY 24B kpn_clear: SYNERGY24B2SNo11 bkpn: RENOLD SYNERGY 24B-2 S No. 11 bkpn_clear: RENOLD SYNERGY24B2SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY24B2S11I sr_ns: RENOLDGY24B2S11I
r: 03030048 p: 89.019 pid: 88378 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A3S26I sr_no_br: 80A3S26I sr_no_br_cl: 80A3S26I sr_cl: RENOLD80A3S26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 91,2 mm Product line Renold Blue Weight (kg/m) 8,3 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-3 Height 3 Inside width 15,75 mm Breaking strength 166800 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 80-3 No. 26 closing link plywood 1" - 80A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1" kpn: BLUE 80-3 No. 26 kpn_dash: BLUE 80 kpn_clear: BLUE803No26 bkpn: RENOLD BLUE 80-3 No. 26 bkpn_clear: RENOLD BLUE803No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A3S26I sr_ns: RENOLD80A3S26I
r: 02097264 p: 89.019 pid: 88017 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A3S11I sr_no_br: 80A3S11I sr_no_br_cl: 80A3S11I sr_cl: RENOLD80A3S11I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 91,2 mm Product line Renold Blue Weight (kg/m) 8,3 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-3 Height 3 Inside width 15,75 mm Breaking strength 166800 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 80-3 No. 11 closing link plywood 1" - 80A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1" kpn: BLUE 80-3 No. 11 kpn_dash: BLUE 80 kpn_clear: BLUE803No11 bkpn: RENOLD BLUE 80-3 No. 11 bkpn_clear: RENOLD BLUE803No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A3S11I sr_ns: RENOLD80A3S11I
r: 03030582 p: 87.149 pid: 88563 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 16B2SNS26I sr_no_br: 16B2SNS26I sr_no_br_cl: 16B2SNS26I sr_cl: RENOLD16B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 66,8 mm Product line Renold Syno Weight (kg/m) 5,4 kg/m Thickness (outer plate) 3,06 mm Type (ISO/ANSI) 16B-2 Height 3 Inside width 17,02 mm Breaking strength 106000 N Diameter (pin) 8,27 mm Thickness (inner plate) 3,76 mm Plate height 20,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 16B-2 SN No. 26 connecting link duplex 1" - 16B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 1" kpn: SYNO 16B-2 SN No. 26 kpn_dash: SYNO 16B kpn_clear: SYNO16B2SNNo26 bkpn: RENOLD SYNO 16B-2 SN No. 26 bkpn_clear: RENOLD SYNO16B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B2SNS26I sr_ns: RENOLD16B2SNS26I
r: 03030015 p: 74.906 pid: 89584 b: RENOLD q: 0 st: lt: 15 ean: 0673766007462 sr: RENOLD 20B2S26I sr_no_br: 20B2S26I sr_no_br_cl: 20B2S26I sr_cl: RENOLD20B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 76,7 mm Product line Renold Blue Weight (kg/m) 7,8 kg/m Thickness (outer plate) 3,61 mm Type (ISO/ANSI) 20B-2 Height 2,7 Inside width 19,56 mm Breaking strength 170000 N Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 20B-2 No. 26 connecting link duplex 1 1/4" - 20B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1 1/4" kpn: BLUE 20B-2 No. 26 kpn_dash: BLUE 20B kpn_clear: BLUE20B2No26 bkpn: RENOLD BLUE 20B-2 No. 26 bkpn_clear: RENOLD BLUE20B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 20B2S26I sr_ns: RENOLD20B2S26I
r: 03030119 p: 74.906 pid: 88395 b: RENOLD q: 0 st: lt: 15 ean: 0673766043019 sr: RENOLD 20B2S11I sr_no_br: 20B2S11I sr_no_br_cl: 20B2S11I sr_cl: RENOLD20B2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 76,7 mm Product line Renold Blue Weight (kg/m) 7,8 kg/m Thickness (outer plate) 3,61 mm Type (ISO/ANSI) 20B-2 Height 2,7 Inside width 19,56 mm Breaking strength 170000 N Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 20B-2 No. 11 connecting link duplex 1 1/4" - 20B2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1 1/4" kpn: BLUE 20B-2 No. 11 kpn_dash: BLUE 20B kpn_clear: BLUE20B2No11 bkpn: RENOLD BLUE 20B-2 No. 11 bkpn_clear: RENOLD BLUE20B2No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 20B2S11I sr_ns: RENOLD20B2S11I
r: 03030171 p: 71.324 pid: 89623 b: RENOLD q: 0 st: lt: 15 ean: 6623901323906 sr: RENOLD GY20B1S26I sr_no_br: GY20B1S26I sr_no_br_cl: GY20B1S26I sr_cl: RENOLDGY20B1S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 39,8 mm Product line Renold Synergy Weight (kg/m) 3,85 kg/m Thickness (outer plate) 3,61 mm Type (ISO/ANSI) 20B-1 Height 2,7 Inside width 19,56 mm Breaking strength 95000 N Diameter (pin) 10,19 mm Thickness (inner plate) 3,61 mm Plate height 26,42 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 20B-1 S No. 26 closing link simplex 1 1/4" - GY20B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1 1/4" kpn: SYNERGY 20B-1 S No. 26 kpn_dash: SYNERGY 20B kpn_clear: SYNERGY20B1SNo26 bkpn: RENOLD SYNERGY 20B-1 S No. 26 bkpn_clear: RENOLD SYNERGY20B1SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY20B1S26I sr_ns: RENOLDGY20B1S26I
r: 03030577 p: 71.324 pid: 88137 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 20B1SNS26I sr_no_br: 20B1SNS26I sr_no_br_cl: 20B1SNS26I sr_cl: RENOLD20B1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 41,4 mm Product line Renold Syno Weight (kg/m) 3,75 kg/m Thickness (outer plate) 4,16 mm Type (ISO/ANSI) 20B-1 Height 2,1 Inside width 19,56 mm Breaking strength 95000 N Diameter (pin) 10,17 mm Thickness (inner plate) 4,46 mm Plate height 25,3 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 20B-1 SN No. 26 closing link simplex 1 1/4" - 20B1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 1 1/4" kpn: SYNO 20B-1 SN No. 26 kpn_dash: SYNO 20B kpn_clear: SYNO20B1SNNo26 bkpn: RENOLD SYNO 20B-1 SN No. 26 bkpn_clear: RENOLD SYNO20B1SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 20B1SNS26I sr_ns: RENOLD20B1SNS26I
r: 03030587 p: 70.145 pid: 88150 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A1SNS26I sr_no_br: 80A1SNS26I sr_no_br_cl: 80A1SNS26I sr_cl: RENOLD80A1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 33,7 mm Product line Renold Syno Weight (kg/m) 2,9 kg/m Thickness (outer plate) 3,06 mm Type (ISO/ANSI) 80-1 Height 3,1 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,92 mm Thickness (inner plate) 4,06 mm Plate height 23 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 80-1 SN No. 26 closing link simplex 1" - 80A1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 1" kpn: SYNO 80-1 SN No. 26 kpn_dash: SYNO 80 kpn_clear: SYNO801SNNo26 bkpn: RENOLD SYNO 80-1 SN No. 26 bkpn_clear: RENOLD SYNO801SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A1SNS26I sr_ns: RENOLD80A1SNS26I
r: 03030120 p: 68.476 pid: 88398 b: RENOLD q: 0 st: lt: 8 ean: 0673766041855 sr: RENOLD 16B3S11I sr_no_br: 16B3S11I sr_no_br_cl: 16B3S11I sr_cl: RENOLD16B3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 98,6 mm Product line Renold Blue Weight (kg/m) 8,15 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-3 Height 2,2 Inside width 17,02 mm Breaking strength 160000 N Diameter (pin) 8,28 mm Thickness (inner plate) 3,76 mm Plate height 21,08 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 16B-3 No. 11 closing link plywood 1" - 16B3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1" kpn: BLUE 16B-3 No. 11 kpn_dash: BLUE 16B kpn_clear: BLUE16B3No11 bkpn: RENOLD BLUE 16B-3 No. 11 bkpn_clear: RENOLD BLUE16B3No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B3S11I sr_ns: RENOLD16B3S11I
r: 03030148 p: 67.268 pid: 87699 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 16B2SSS26I sr_no_br: 16B2SSS26I sr_no_br_cl: 16B2SSS26I sr_cl: RENOLD16B2SSS26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 66,8 mm Product line Renold Stainless Steel Weight (kg/m) 5,4 kg/m Thickness (outer plate) 3 mm Type (ISO/ANSI) 16B-2 Height 2,2 Inside width 17,02 mm Breaking strength 86320 N Diameter (pin) 8,28 mm Thickness (inner plate) 3,7 mm Plate height 21,08 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 16B-2 No. 26 connecting link duplex 1" - 16B2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 1" kpn: stainless steel 16B-2 No. 26 kpn_dash: stainless steel 16B kpn_clear: stainlesssteel16B2No26 bkpn: RENOLD stainless steel 16B-2 No. 26 bkpn_clear: RENOLD stainlesssteel16B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B2SSS26I sr_ns: RENOLD16B2SSS26I
r: 03030040 p: 56.665 pid: 89577 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S26I sr_no_br: 80A2S26I sr_no_br_cl: 80A2S26I sr_cl: RENOLD80A2S26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 80-2 No. 26 connecting link duplex 1" - 80A2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 26 kpn_dash: BLUE 80 kpn_clear: BLUE802No26 bkpn: RENOLD BLUE 80-2 No. 26 bkpn_clear: RENOLD BLUE802No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S26I sr_ns: RENOLD80A2S26I
r: 02097190 p: 56.665 pid: 89528 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S11I sr_no_br: 80A2S11I sr_no_br_cl: 80A2S11I sr_cl: RENOLD80A2S11I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 80-2 No. 11 connecting link duplex 1" - 80A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 11 kpn_dash: BLUE 80 kpn_clear: BLUE802No11 bkpn: RENOLD BLUE 80-2 No. 11 bkpn_clear: RENOLD BLUE802No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S11I sr_ns: RENOLD80A2S11I
r: 02274428 p: 54.018 pid: 88021 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A2SSS26I sr_no_br: 60A2SSS26I sr_no_br_cl: 60A2SSS26I sr_cl: RENOLD60A2SSS26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 48,1 mm Product line Renold Stainless Steel Weight (kg/m) 2,91 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-2 Height 2,6 Inside width 12,57 mm Breaking strength 60000 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 60-2 No. 26 connecting link duplex 3/4" - 60A2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 3/4" kpn: stainless steel 60-2 No. 26 kpn_dash: stainless steel 60 kpn_clear: stainlesssteel602No26 bkpn: RENOLD stainless steel 60-2 No. 26 bkpn_clear: RENOLD stainlesssteel602No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A2SSS26I sr_ns: RENOLD60A2SSS26I
