r: 08096974 p: 4.85 pid: 27309 b: SPIT q: 0 st: lt: 8 ean: 3439510587195 sr: SPIT 058719 sr_no_br: 058719 sr_no_br_cl: 058719 sr_cl: SPIT058719 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 14 mm Length 110 mm Surface treatment Zinc plated Max. useful length 35 n: SPIT 058719 TAPCON HFL PLUS hexagonal concrete screw 14x110mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Reusable hexagonal concrete screw Reusable high performance concrete screw designed for multiple use Suitable for use in fresh concrete Cost-saving solution where only temporary fixing is required Inspection sleeve supplied in each box, this allows the user to check the removed product is still suitable for future installations Manufactured with an induction-hardened process that provides the strength and durability at the end of the thread to tap its own thread, but has the flexibility on the rest to resist breakage Patented wire design for increased loading and quick installation 10 mm and 12 mm anchors are supplied without a built-in ring Applications Formwork Temporary screens / screens Temporary fences Push and pull props ds: dsc: kts: TAPCON HFL PLUS hexagonal concrete screw 14x110mm kpn: 058719 kpn_dash: kpn_clear: 058719 bkpn: SPIT 058719 bkpn_clear: SPIT 058719 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058719 sr_ns: SPIT058719
r: 08085494 p: 4.67 pid: 24144 b: SPIT q: 0 st: lt: 8 ean: 3439510586563 sr: SPIT 058656 sr_no_br: 058656 sr_no_br_cl: 058656 sr_cl: SPIT058656 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 8 mm Material Stainless steel A4 Length 80 mm n: SPIT 058656 TAPCON XT LT HFL concrete screw 8x80 A4 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping stainless steel screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range to be used in C1 and C2 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations where alignment without loss of performance is required 3 anchoring depths for Ø8 to Ø10 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC Canopies ds: dsc: kts: TAPCON XT LT HFL concrete screw 8x80 A4 kpn: 058656 kpn_dash: kpn_clear: 058656 bkpn: SPIT 058656 bkpn_clear: SPIT 058656 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058656 sr_ns: SPIT058656
r: 08085493 p: 4.55 pid: 24142 b: SPIT q: 0 st: lt: 8 ean: 3439510586556 sr: SPIT 058655 sr_no_br: 058655 sr_no_br_cl: 058655 sr_cl: SPIT058655 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 8 mm Material Stainless steel A4 Length 70 mm n: SPIT 058655 TAPCON XT LT HFL concrete screw 8x70 A4 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping stainless steel screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range to be used in C1 and C2 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations where alignment without loss of performance is required 3 anchoring depths for Ø8 to Ø10 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC Canopies ds: dsc: kts: TAPCON XT LT HFL concrete screw 8x70 A4 kpn: 058655 kpn_dash: kpn_clear: 058655 bkpn: SPIT 058655 bkpn_clear: SPIT 058655 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058655 sr_ns: SPIT058655
r: 08085498 p: 4.23 pid: 23356 b: SPIT q: 0 st: lt: 24 ean: 3439510586518 sr: SPIT 058651 sr_no_br: 058651 sr_no_br_cl: 058651 sr_cl: SPIT058651 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 6 mm Material Stainless steel A4 Length 50 mm n: SPIT 058651 TAPCON XT LT HFL concrete screw 6x50 A4 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping stainless steel screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range to be used in C1 and C2 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations where alignment without loss of performance is required 3 anchoring depths for Ø8 to Ø10 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC Canopies ds: dsc: kts: TAPCON XT LT HFL concrete screw 6x50 A4 kpn: 058651 kpn_dash: kpn_clear: 058651 bkpn: SPIT 058651 bkpn_clear: SPIT 058651 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058651 sr_ns: SPIT058651
r: 02776800 p: 3.82 pid: 20712 b: FISCHER q: 0 st: lt: 8 ean: 4048962251616 sr: FISCHER 536878 sr_no_br: 536878 sr_no_br_cl: 536878 sr_cl: FISCHER536878 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 14 mm Length 150 mm Max. useful length 85 mm n: FISCHER 536878 concrete screw FBS II 14x150 85/65/35 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x150 85/65/35 hexagon head kpn: 536878 kpn_dash: kpn_clear: 536878 bkpn: FISCHER 536878 bkpn_clear: FISCHER 536878 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536878 sr_ns: FISCHER536878
r: 02776772 p: 3.2 pid: 44623 b: FISCHER q: 0 st: lt: 13 ean: 4048962251517 sr: FISCHER 536868 sr_no_br: 536868 sr_no_br_cl: 536868 sr_cl: FISCHER536868 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 12 mm Max. useful length 205 mm Length 260 mm n: FISCHER 536868 concrete screw FBS II 10x260 205/195/175 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x260 205/195/175 hexagon head kpn: 536868 kpn_dash: kpn_clear: 536868 bkpn: FISCHER 536868 bkpn_clear: FISCHER 536868 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536868 sr_ns: FISCHER536868
r: 02758455 p: 3.17 pid: 20202 b: SPIT q: 225 st: 1 lt: 1 ean: 3439510587485 sr: SPIT 058748 sr_no_br: 058748 sr_no_br_cl: 058748 sr_cl: SPIT058748 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 12 mm Max. useful length 110 mm n: SPIT 058748 TAPCON XTREM HFL concrete screw 12x110/45-10 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 12x110/45-10 kpn: 058748 kpn_dash: kpn_clear: 058748 bkpn: SPIT 058748 bkpn_clear: SPIT 058748 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058748 sr_ns: SPIT058748
r: 02776799 p: 3.04 pid: 21331 b: FISCHER q: 0 st: lt: 8 ean: 4048962251609 sr: FISCHER 536877 sr_no_br: 536877 sr_no_br_cl: 536877 sr_cl: FISCHER536877 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 14 mm Max. useful length 60 mm Length 125 mm n: FISCHER 536877 concrete screw FBS II 14x125 60/40/10 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x125 60/40/10 hexagon head kpn: 536877 kpn_dash: kpn_clear: 536877 bkpn: FISCHER 536877 bkpn_clear: FISCHER 536877 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536877 sr_ns: FISCHER536877
r: 02776793 p: 2.69 pid: 20709 b: FISCHER q: 0 st: lt: 8 ean: 4048962251562 sr: FISCHER 536873 sr_no_br: 536873 sr_no_br_cl: 536873 sr_cl: FISCHER536873 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 14 mm Length 150 mm Max. useful length 90 mm n: FISCHER 536873 concrete screw FBS II 12x150 90/75/50 hexagonal head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x150 90/75/50 hexagonal head kpn: 536873 kpn_dash: kpn_clear: 536873 bkpn: FISCHER 536873 bkpn_clear: FISCHER 536873 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536873 sr_ns: FISCHER536873
r: 02758454 p: 2.64 pid: 21561 b: SPIT q: 0 st: lt: 11 ean: 3439510587478 sr: SPIT 058747 sr_no_br: 058747 sr_no_br_cl: 058747 sr_cl: SPIT058747 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Max. useful length 80 mm n: SPIT TAPCON XTREM HFL concrete screw 12x80/15 - 058747 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 12x80/15 kpn: 058747 kpn_dash: kpn_clear: 058747 bkpn: SPIT 058747 bkpn_clear: SPIT 058747 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058747 sr_ns: SPIT058747
r: 02776770 p: 2.6 pid: 22021 b: FISCHER q: 0 st: lt: 8 ean: 4048962251500 sr: FISCHER 536867 sr_no_br: 536867 sr_no_br_cl: 536867 sr_cl: FISCHER536867 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 10 mm Max. useful length 175 mm Length 230 mm n: FISCHER 536867 concrete screw FBS II 10x230 175/165/145 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x230 175/165/145 hexagon head kpn: 536867 kpn_dash: kpn_clear: 536867 bkpn: FISCHER 536867 bkpn_clear: FISCHER 536867 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536867 sr_ns: FISCHER536867
r: 02776794 p: 2.6 pid: 22098 b: FISCHER q: 0 st: lt: 8 ean: 4048962251579 sr: FISCHER 536874 sr_no_br: 536874 sr_no_br_cl: 536874 sr_cl: FISCHER536874 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 14 mm Max. useful length 10 mm Length 75 mm n: FISCHER 536874 concrete screw FBS II 14x75 10/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x75 10/- hexagon head kpn: 536874 kpn_dash: kpn_clear: 536874 bkpn: FISCHER 536874 bkpn_clear: FISCHER 536874 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536874 sr_ns: FISCHER536874
r: 02756819 p: 2.36 pid: 21492 b: SPIT q: 0 st: lt: 10 ean: 3439510587461 sr: SPIT 058746 sr_no_br: 058746 sr_no_br_cl: 058746 sr_cl: SPIT058746 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 10 mm Max. useful length 160 mm n: SPIT 058746 TAPCON XTREM HFL concrete screw 10x160/105-75 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 10x160/105-75 kpn: 058746 kpn_dash: kpn_clear: 058746 bkpn: SPIT 058746 bkpn_clear: SPIT 058746 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058746 sr_ns: SPIT058746
r: 02776778 p: 2.34 pid: 20433 b: FISCHER q: 0 st: lt: 6 ean: 4048962251548 sr: FISCHER 536871 sr_no_br: 536871 sr_no_br_cl: 536871 sr_cl: FISCHER536871 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 12 mm Max. useful length 50 mm Length 110 mm n: FISCHER 536871 concrete screw FBS II 12x110 50/35/10 hexagonal head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x110 50/35/10 hexagonal head kpn: 536871 kpn_dash: kpn_clear: 536871 bkpn: FISCHER 536871 bkpn_clear: FISCHER 536871 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536871 sr_ns: FISCHER536871
r: 02776777 p: 2.17 pid: 22095 b: FISCHER q: 0 st: lt: 5 ean: 4048962251531 sr: FISCHER 536870 sr_no_br: 536870 sr_no_br_cl: 536870 sr_cl: FISCHER536870 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 12 mm Max. useful length 25 mm Length 85 mm n: FISCHER 536870 concrete screw FBS II 12x85 25/10/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x85 25/10/- hexagon head kpn: 536870 kpn_dash: kpn_clear: 536870 bkpn: FISCHER 536870 bkpn_clear: FISCHER 536870 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536870 sr_ns: FISCHER536870
r: 02776769 p: 2.17 pid: 21319 b: FISCHER q: 0 st: lt: 34 ean: 4048962251494 sr: FISCHER 536866 sr_no_br: 536866 sr_no_br_cl: 536866 sr_cl: FISCHER536866 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 10 mm Max. useful length 145 mm Length 200 mm n: FISCHER 536866 concrete screw FBS II 10x200 145/135/115 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x200 145/135/115 hexagon head kpn: 536866 kpn_dash: kpn_clear: 536866 bkpn: FISCHER 536866 bkpn_clear: FISCHER 536866 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536866 sr_ns: FISCHER536866
r: 08096972 p: 2 pid: 27300 b: SPIT q: 0 st: lt: 8 ean: 3439510587171 sr: SPIT 058717 sr_no_br: 058717 sr_no_br_cl: 058717 sr_cl: SPIT058717 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 10 mm Length 90 mm Surface treatment Zinc plated Max. useful length 35 mm n: SPIT 058717 TAPCON HFL PLUS concrete screw with hexagonal screw 10x90mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Reusable hexagonal concrete screw Reusable high performance concrete screw designed for multiple use Suitable for use in fresh concrete Cost-saving solution where only temporary fixing is required Inspection sleeve supplied in each box, this allows the user to check the removed product is still suitable for future installations Manufactured with an induction-hardened process that provides the strength and durability at the end of the thread to tap its own thread, but has the flexibility on the rest to resist breakage Patented wire design for increased loading and quick installation 10 mm and 12 mm anchors are supplied without a built-in ring Applications Formwork Temporary screens / screens Temporary fences Push and pull props ds: dsc: kts: TAPCON HFL PLUS concrete screw with hexagonal screw 10x90mm kpn: 058717 kpn_dash: kpn_clear: 058717 bkpn: SPIT 058717 bkpn_clear: SPIT 058717 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058717 sr_ns: SPIT058717
r: 02776774 p: 1.9 pid: 21322 b: FISCHER q: 0 st: lt: 8 ean: 4048962251524 sr: FISCHER 536869 sr_no_br: 536869 sr_no_br_cl: 536869 sr_cl: FISCHER536869 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 12 mm Max. useful length 10 mm Length 70 mm n: FISCHER 536869 concrete screw FBS II 12x70 10/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x70 10/- hexagon head kpn: 536869 kpn_dash: kpn_clear: 536869 bkpn: FISCHER 536869 bkpn_clear: FISCHER 536869 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536869 sr_ns: FISCHER536869
r: 02756816 p: 1.88 pid: 20702 b: SPIT q: 0 st: lt: 13 ean: 3439510587454 sr: SPIT 058745 sr_no_br: 058745 sr_no_br_cl: 058745 sr_cl: SPIT058745 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 10 mm Max. useful length 140 mm n: SPIT 058745 TAPCON XTREM HFL concrete screw 10x140/85-55 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 10x140/85-55 kpn: 058745 kpn_dash: kpn_clear: 058745 bkpn: SPIT 058745 bkpn_clear: SPIT 058745 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058745 sr_ns: SPIT058745
