r: 03229633 p: 71.033 pid: 71786 b: WERA q: 0 st: lt: 8 ean: 4013288188113 sr: WERA 05074792010 sr_no_br: 05074792010 sr_no_br_cl: 05074792010 sr_cl: WERA05074792010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm - 05074792010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 kpn_dash: kpn_clear: 7451 bkpn: WERA 7451 bkpn_clear: WERA 7451 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074792010 sr_ns: WERA05074792010
r: 02836008 p: 68.76 pid: 42070 b: WERA q: 0 st: lt: 12 ean: 4013288179470 sr: WERA 05074822001 sr_no_br: 05074822001 sr_no_br_cl: 05074822001 sr_cl: WERA05074822001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 ESD Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm - 05074822001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 ESD x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 ESD kpn_dash: kpn_clear: 7451ESD bkpn: WERA 7451 ESD bkpn_clear: WERA 7451ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074822001 sr_ns: WERA05074822001
r: 03229638 p: 67.603 pid: 70079 b: WERA q: 0 st: lt: 8 ean: 4013288188151 sr: WERA 05074716010 sr_no_br: 05074716010 sr_no_br_cl: 05074716010 sr_cl: WERA05074716010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 Kraftform torque screwdriver with fixed preset measuring range 1.2-3.0 Nm - 05074716010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 x 1.2-3.0 Nm kts: Kraftform torque screwdriver with fixed preset measuring range 1.2-3.0 Nm kpn: 7461 kpn_dash: kpn_clear: 7461 bkpn: WERA 7461 bkpn_clear: WERA 7461 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074716010 sr_ns: WERA05074716010
r: 03229630 p: 66.776 pid: 71782 b: WERA q: 0 st: lt: 8 ean: 4013288188106 sr: WERA 05074790010 sr_no_br: 05074790010 sr_no_br_cl: 05074790010 sr_cl: WERA05074790010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7450 Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm - 05074790010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 x 0.1-0.34 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm kpn: 7450 kpn_dash: kpn_clear: 7450 bkpn: WERA 7450 bkpn_clear: WERA 7450 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074790010 sr_ns: WERA05074790010
r: 03229736 p: 66.776 pid: 71803 b: WERA q: 0 st: lt: 12 ean: 4013288188250 sr: WERA 05074720010 sr_no_br: 05074720010 sr_no_br_cl: 05074720010 sr_cl: WERA05074720010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform torque screwdriver 2.5-11.5 in. lbs. - 05074720010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7465 x 2.5-11.5 in. lbs. kts: Kraftform torque screwdriver 2.5-11.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720010 sr_ns: WERA05074720010
r: 02012167 p: 62.768 pid: 42388 b: WERA q: 0 st: lt: 12 ean: 4013288099136 sr: WERA 05028046001 sr_no_br: 05028046001 sr_no_br_cl: 05028046001 sr_cl: WERA05028046001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size IP20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 IP torque indicator with pistol grip TORX PLUS, 20 IP x 5.0 Nm - 05028046001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX PLUS® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform pistol handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application TORX PLUS® socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 IP TORX PLUS® Torque-indicator, pistol handle, 20 IP x 5.0 Nm kts: torque indicator with pistol grip TORX PLUS, 20 IP x 5.0 Nm kpn: 300 IP kpn_dash: kpn_clear: 300IP bkpn: WERA 300 IP bkpn_clear: WERA 300IP c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05028046001 sr_ns: WERA05028046001
r: 08103729 p: 61.78 pid: 159678 b: WERA q: 0 st: lt: 8 ean: 4013288227515 sr: WERA 05073641001 sr_no_br: 05073641001 sr_no_br_cl: 05073641001 sr_cl: WERA05073641001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed Connection size (bit) 1/4" Connection profile (bit) Hexagonal ESD No VDE approved No Quantity per set 12 Product Range Wera Bit-Check n: WERA 05073641001 Bit-Check 12 Wood TX HF 1 SB, 12-piece cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits and holder set, particularly suitable for woodworking. With their special geometry and as per the specification Acument Intellectual Properties, the 867/1 TORX® HF bits hold TORX® screws securely on the tool! This is particularly helpful in hard-to-reach work areas where the second hand cannot be used to hold the screw. They are also suitable for Würth ASSY screws as well as Altenloh SPAX T-STAR plus screws. With Take it easy tool finder: colour coding by size. Ringmagnet Rapidaptor holding tool to hold long and heavy screws. The Bit-Check allows a quick overview of the available tools. Unused bits are simply put back in the holder and will not be lost. Easy transport e.g. in your shirt pocket. The Bit-Check can be set up at the work place, which allows for quick access of the tools. Particularly for wood applications 867/1 TORX® HF bits with holding function for TORX® screws as per the specification Acument Intellectual Properties Also suitable for Würth ASSY screws as well as Altenloh SPAX T-STAR plus screws 1/4" hexagon drive (Wera connecting series 1) With Take it easy tool finder: colour coding by size One Rapidaptor universal holder with ring magnet and quick-release chuck, 11 bits, 867/1 TORX® HF with holding function for TORX® socket screws as per the specification Acument Intellectual Properties; also suitable for Würth ASSY screws as well as Altenloh SPAX T-STAR plus screws. With Take it easy tool finder: colour coding by size; 867/1 TORX® TX 20 and TX 25 without holding function, tough (Z), for universal use. Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The Wera 867/1 TX HF bits are also suitable for Würth ASSY screws as well as Altenloh SPAX T-STAR plus screws. The floating, free-turning magnetic sleeve securely holds even large and heavy screws to enable immediate application. There is no need to hold the screw when applying the tool - something which can be dangerous and painful. Also ideal for overhead work. The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. ds: dsc: Scope of delivery Bit-Check 12 Wood TX HF 1 SB, 12 pieces 1x 887/4 RR Rapidaptor Universal Bit Holder with ring magnet: 1/4" x 57 mm 7x 867/1 TORX® HF Bits with holding function: TX 40x25 mm, TX 30x25 mm, 2x TX 25x25 mm, TX 20x25 mm, TX 15x25 mm, TX 10x25 mm 2x 867/1 TORX® bits: TX 25x25 mm, TX 20x25 mm 2x 855/1 Z bits: PZ 2x25 mm, PZ 1x25 mm kts: Bit-Check 12 Wood TX HF 1 SB, 12-piece kpn: 05073641001 kpn_dash: kpn_clear: 05073641001 bkpn: WERA 05073641001 bkpn_clear: WERA 05073641001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073641001 sr_ns: WERA05073641001
r: 08131772 p: 60.991 pid: 173570 b: WERA q: 0 st: lt: 8 ean: 4013288234094 sr: WERA 05051536001 sr_no_br: 05051536001 sr_no_br_cl: 05051536001 sr_cl: WERA05051536001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 13 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Pistol RA-R 2 bit set, 13-piece - 05051536001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform pistol handle for 1/4" hex drive bits. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The Rapidaptor technology of the bitholding screwdriver makes for a quick bit change. Includes 6 BiTorsion bits (25 mm) for a long product life, tough, for universal use; stored in the bit magazine integrated in the handle. 6 tough bits (89 mm) for universal use. The strong permanent magnet in the 1/4" bit mounting ensures secure holding of the bit. The 2-component Kraftform pistol handle allows for high leverage. The robust holster can be attached to the belt. The ratchet with fine toothing integrated in the handle allows fast working The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw Intuitive switching: If I turn the switch clockwise - the ratchet turns clockwise, if I turn the switch counterclockwise - it goes counterclockwise Integrated bit magazine with 6x 25 mm bits 6x25mm bits with Take it easy tool finder: colour coding by profile and size stamping and 6x89mm bits Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4 Design Ratchet with fine toothing integrated in the handle, intuitive switching, use position 0 to deactivate the ratchet mechanism for precise working; 1/4" hexagonal bit mounting, magnetic. Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand functions. 6 BiTorsion bits (25 mm) for a long product life, tough, for universal use. Take it easy tool finder: with colour coding by tip and size stamping for easy identification of the required bit. 6 tough bits (89 mm). With robust holster that can be attached to the belt. Handle Kraftform pistol handle, multi-component, integrated magazine Features and benefits The ratchet with fine toothing integrated in the handle allows fast working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. Intuitive switching of the ratchet mechanism. Turn the switch clockwise for clockwise screwdriving; turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Kraftform Kompakt Pistol RA-R 2, 13 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm 2x 867/1 BTZ TORX® bits: TX 20x25 mm, TX 25x25 mm 2x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm 2x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm 2x 867/4 Z TORX® bits: TX 20x89 mm, TX 25x89 mm 1x 814 RA-R Pistol handle with ratchet functionality: 1/4" kts: bit set, 13-piece kpn: Kraftform Kompakt Pistol RA-R 2 kpn_dash: Kraftform Kompakt Pistol RA kpn_clear: KraftformKompaktPistolRAR2 bkpn: WERA Kraftform Kompakt Pistol RA-R 2 bkpn_clear: WERA KraftformKompaktPistolRAR2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051536001 sr_ns: WERA05051536001
r: 03229830 p: 57.86 pid: 71848 b: WERA q: 0 st: lt: 8 ean: 4013288196576 sr: WERA 05078691001 sr_no_br: 05078691001 sr_no_br_cl: 05078691001 sr_cl: WERA05078691001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 14 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert ring spanner 14x18 mm, 14 x 62 mm - 05078691001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 14 x 63 mm kts: insert ring spanner 14x18 mm, 14 x 62 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078691001 sr_ns: WERA05078691001
r: 03229833 p: 57.86 pid: 70121 b: WERA q: 0 st: lt: 8 ean: 4013288196583 sr: WERA 05078692001 sr_no_br: 05078692001 sr_no_br_cl: 05078692001 sr_cl: WERA05078692001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 15 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert-ring spanner 14x18 mm, 15 x 62 mm - 05078692001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 15 x 63.5 mm kts: insert-ring spanner 14x18 mm, 15 x 62 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078692001 sr_ns: WERA05078692001
r: 08103852 p: 57.809 pid: 71026 b: WERA q: 0 st: lt: 13 ean: 4013288228345 sr: WERA 05057113001 sr_no_br: 05057113001 sr_no_br_cl: 05057113001 sr_cl: WERA05057113001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hex Type of drive profile (bit) Mixed VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 32 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 70 Universal bit assortment 33-piece - 05057113001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 32-piece set with 816 R Kraftform bitholding screwdriver with Rapidaptor quick-release chuck and multi-component Kraftform handle for fatigue-free working. Rapidaptor universal holder with strong permanent magnet, which even holds big and heavy screws. Throw in the 30 bits and the user is equipped for almost every application. In a robust textile box; compatible with Wera 2go. 32-piece set Strong permanent magnet Rapidaptor quick-release chuck allows rapid bit change Tough viscous bits for universal use Assortment in robust textile box with low weight for easy transport 32-piece setOne 816 R Kraftform bitholding screwdriver with Rapidaptor quick-release chuck, one Rapidaptor 889/4/1 K universal holder Features and benefits The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Robust textile box that keeps the tools safe during transport and always close at hand. The textile box is suitable for attachment to the wall or shelf thanks to the hook and loop fastener strips on the back. ds: dsc: Scope of delivery Kraftform Kompakt 70 Universal, 32 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 9x 851/1 TZ bits: 3x PH 1x25 mm, 3x PH 2x25 mm, 3x PH 3x25 mm 9x 855/1 TZ bits: 3x PZ 1x25 mm, 3x PZ 2x25 mm, 3x PZ 3x25 mm 6x 867/1 Z TORX® BO bits with bore hole: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 3x 840/1 Z bits: 4x25 mm, 5x25 mm, 6x25 mm 3x 800/1 TZ bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm 1x 9478 Kraftform Kompakt 70/71 Textile box, empty: 160 x 95 x 65 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: bit assortment 33-piece kpn: Kraftform Kompakt 70 Universal kpn_dash: kpn_clear: KraftformKompakt70Universal bkpn: WERA Kraftform Kompakt 70 Universal bkpn_clear: WERA KraftformKompakt70Universal c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05057113001 sr_ns: WERA05057113001
r: 02836013 p: 56.859 pid: 42154 b: WERA q: 0 st: lt: 12 ean: 4013288179487 sr: WERA 05074840001 sr_no_br: 05074840001 sr_no_br_cl: 05074840001 sr_cl: WERA05074840001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 ESD Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm - 05074840001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 ESD x 0.3 Nm x 0.3-1.2 Nm kts: Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm kpn: 7460 ESD kpn_dash: kpn_clear: 7460ESD bkpn: WERA 7460 ESD bkpn_clear: WERA 7460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074840001 sr_ns: WERA05074840001
r: 08108071 p: 54.71 pid: 159681 b: WERA q: 0 st: lt: 8 ean: 4013288229656 sr: WERA 05006630001 sr_no_br: 05006630001 sr_no_br_cl: 05006630001 sr_cl: WERA05006630001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex Type of drive profile (bit) Mixed VDE approved Yes With safety colour code 1000V Yes ESD No Supplied in Case Product Range Wera Kraftform Kompakt n: WERA 05006630001 Kraftform Kompakt VDE RVS 8 extra slim 1 Tool Finder, 8-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description One 3817 VDE Kraftform bitholding screwdriver for ergonomic screwdriving. 7 VDE stainless blades, some of which with reduced blade diameter (iS), so that even low-lying screw and spring elements can be easily reached and operated; with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. In a robust belt pouch. The pouch is suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. VDE-insulated Kraftform 3817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested VDE Stainless blades, some of which with reduced blade diameter Blades made of stainless steel to prevent extraneous rust Vacuum ice-hardening provides the required hardness and strength 8-piece setOne 3817 VDE Stainless Kraftform bitholding screwdriver solely for Wera VDE blades7 Kraftform Kompakt VDE Stainless blades (each 157 mm length), TX 15, TX 20 and TX 25 with reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated Features and benefits The Kraftform Kompakt series stands for low weight, low space requirements and high flexibility due to interchangeable blades. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE Stainless 8 extra slim 1 Tool finder, 8 pieces 1x 3817 VDE Kraftform Stainless blade-holding handle: 9 x 98 mm 4x Kraftform Kompakt VDE 3067 i TORX® Take it easy, stainless steel: TX 8x157 mm, TX 9x157 mm, TX 10x157 mm, TX 30x157 mm 3x Kraftform Kompakt VDE 3067 iS TORX® Take it easy, stainless steel: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE RVS 8 extra slim 1 Tool Finder, 8-piece kpn: 05006630001 kpn_dash: kpn_clear: 05006630001 bkpn: WERA 05006630001 bkpn_clear: WERA 05006630001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006630001 sr_ns: WERA05006630001
r: 08103829 p: 54.71 pid: 72283 b: WERA q: 0 st: lt: 8 ean: 4013288227553 sr: WERA 05005452001 sr_no_br: 05005452001 sr_no_br_cl: 05005452001 sr_cl: WERA05005452001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (socket) Hexagonal Connection size 3/8" Smallest size 1/4 inch Largest size 3/4 inch Quantity per set 9 n: WERA 9608 socket magnet strip B Impaktor inch 1 socket wrench holder with socket spanners 9-piece - 05005452001 cn: IMPACT SOCKET SET cn2: IMPACT SOCKET SET cn_clear: IMPACTSOCKETSET d: Product description Socket rail with 9 Impaktor socket wrenches for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. The hexagon profile used allows a high power transmission while simultaneously being precise and protecting the profile. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. The rail allows temporary attachment to metallic surfaces and, with its twist-to-unlock function, ensures secure locking and unlocking of the sockets. 9-piece socket set on socket rail, 3/8" Magnetic rail with secure socket mounting and yet easy removal (twist-to-unlock) for temporary attachment on wall, shelf or workshop trolley Smooth rotary mechanism for a secure hold and easy access of the tools For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life 9-piece set; on a magnetic rail for temporary attachment on wall, shelf or workshop trolley. Smooth rotary mechanism for safe storage and easy access of the tools.9 Impaktor sockets with 3/8" drive. With hexagon profile and socket with hole. For use with electric or pneumatic wrenches with 3/8" drive. Take it easy Tool finder: With colour coding by size - for quick and easy identification of the required tool. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). With its twist-to-unlock mechanism, the socket rail ensures easy access of the sockets. At the same time the sockets are held securely. Thanks to the magnet, the rail is suitable for temporary attachment to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9608 Magnetic rail B Impaktor Imperial 1, 9 pieces 9x 8790 B Impaktor socket with 3/8" drive: 1/4"x30 mm, 5/16"x30 mm, 3/8"x30 mm, 7/16"x30 mm, 1/2"x30 mm, 9/16"x30 mm, 5/8"x30 mm, 11/16"x30 mm, 3/4"x30 mm 1x 9601 Magnetic socket rail, 3/8", empty: 30 x 340 mm kts: socket magnet strip B Impaktor inch 1 socket wrench holder with socket spanners 9-piece kpn: 9608 kpn_dash: kpn_clear: 9608 bkpn: WERA 9608 bkpn_clear: WERA 9608 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Impact socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera impact socket set sr_no_br_cl_ns: 05005452001 sr_ns: WERA05005452001
r: 08131776 p: 54.38 pid: 173566 b: WERA q: 0 st: lt: 8 ean: 4013288234070 sr: WERA 05051540001 sr_no_br: 05051540001 sr_no_br_cl: 05051540001 sr_cl: WERA05051540001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Quantity per set 7 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Vario RA 2025 interchangeable pins set, 7-piece - 05051540001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 7-piece blade set. One Kraftform bitholding screwdriver with 6 mm hexagonal blade mounting for combination blades (double blades) from the Wera Vario range. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The 2-component Kraftform handle with the combination of hard and soft zones allows for a firm grip and precise working. 6 Wera Vario double blades (= 12 different profiles), 175 mm long, 6 mm hexagonal. In a robust folding pouch. Kraftform bitholding screwdriver with 6 mm hexagonal blade mounting for combination blades (double blades) from the Wera Vario range The ratchet with fine toothing integrated in the handle allows fast working Intuitive switching: If I turn the switch clockwise - the ratchet turns clockwise, if I turn the switch counterclockwise - it goes counterclockwise Use position 0 to deactivate the ratchet mechanism for precise working Includes 6 Vario double-end blades 7-piece setOne 80 RA Vario bitholding screwdriver with ratchet functionality. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working, 6 mm hexagonal blade mounting for Wera Vario double blades. 6 Vario double blades (= 12 different dimensions). In a robust folding pouch. Features and benefits The Kraftform Vario handle/blade system allows for lightning-fast change of the required double blades and thus a wide range of applications. The ratchet with fine toothing integrated in the handle allows fast working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. Intuitive switching of the ratchet mechanism. Turn the switch clockwise for clockwise screwdriving; turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery Kraftform Kompakt Vario RA, 7 pieces 1x 80 RA Vario blade holding handle with ratchet functionality: 6 x 113.5 mm 1x 85 Combination blade for Phillips screws: PH 1 x PH 2 x 175 mm 1x 86 Combination blade for Pozidriv screws: PZ 1 x PZ 2 x 175 mm 1x 84 Combination blade for hexagon socket screws: 4 x 5 x 175 mm 2x 87 Combination blade for TORX® screws: TX 10xTX 15x175 mm, TX 20xTX 25x175 mm 1x 81 Combination blade for slotted screws: 0.6 x 4 x 1 x 6 x 175 mm kts: interchangeable pins set, 7-piece kpn: Kraftform Kompakt Vario RA 2025 kpn_dash: kpn_clear: KraftformKompaktVarioRA2025 bkpn: WERA Kraftform Kompakt Vario RA 2025 bkpn_clear: WERA KraftformKompaktVarioRA2025 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051540001 sr_ns: WERA05051540001
r: 02815104 p: 54.38 pid: 44444 b: WERA q: 0 st: lt: 8 ean: 4013288099150 sr: WERA 05027913001 sr_no_br: 05027913001 sr_no_br_cl: 05027913001 sr_cl: WERA05027913001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 4 mm ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 Hex torque indicator with pistol grip, 4 x 5.0 Nm - 05027913001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for hexagon socket screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application Hexagon socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Hex-Plus, Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 Hex Torque-indicator, pistol handle, 4 mm x 5.0 Nm kts: torque indicator with pistol grip, 4 x 5.0 Nm kpn: 300 Hex kpn_dash: kpn_clear: 300Hex bkpn: WERA 300 Hex bkpn_clear: WERA 300Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027913001 sr_ns: WERA05027913001
r: 08131769 p: 52.231 pid: 173574 b: WERA q: 0 st: lt: 8 ean: 4013288234025 sr: WERA 05051516001 sr_no_br: 05051516001 sr_no_br_cl: 05051516001 sr_cl: WERA05051516001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 26 RA-R bit set with case, 6-piece - 05051516001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform handle with magazine for 6 bits integrated in the handle; with telescopic blade; for 1/4" hex drive bits. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The telescopic blade with Rapidaptor quick-release chuck, which can be retracted into the handle, allows quick manual screwdriving even in confined working situations when the blade is retracted. The blade can be extended by simply pressing the locking sleeve. The tool can now be used as a fully-fledged screwdriver. The telescopic blade can be removed and used as a machine adapter, as well as returned to its original position. The Rapidaptor technology of the bit holder makes for a quick bit change. Includes 4 BiTorsion bits for long product life, tough, for universal use, two bits, tough, for universal use; stored in the bit magazine integrated in the handle. The strong permanent magnet in the 1/4" bit mounting ensures a secure hold of the bit. The 2-component Kraftform handle with the combination of hard and soft zones allows for a firm grip and precise working. With a robust pouch. The ratchet with fine toothing integrated in the handle allows fast working The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw Intuitive switching: If I turn the switch clockwise - the ratchet turns clockwise, if I turn the switch counterclockwise - it goes counterclockwise Integrated bit magazine with 6x 25 mm bits BiTorsion Bits Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4 Design Ratchet with fine toothing integrated in the handle, intuitive switching, use position 0 to deactivate the ratchet mechanism for precise working; 1/4" hexagonal bit mounting, magnetic; connector, telescopic blade, Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand functions. 4 BiTorsion bits for long product life, tough, for universal use. Take it easy toolfinder: with size stamping and colour coding by tip to help you find the required bit easily, 2 bits, tough, for universal use. Handle Kraftform with anti-roll protection, multi-component, integrated magazine Features and benefits The ratchet with fine toothing integrated in the handle allows fast working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. Intuitive switching of the ratchet mechanism. Turn the switch clockwise for clockwise screwdriving; turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. This set has it all: ratchet integrated in the handle, a telescopic blade that can be retracted into the handle (which can also be removed and used as a bit holder in the screwdriver machine) and a bit magazine integrated in the handle. The Rapidaptor technology guarantees lightning-fast bit changes as well as easy wielding of the tool in machine operations via the fast-rotating sleeve. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. When the telescopic blade is retracted in the handle, the tool can be used even in confined working situations. The telescopic blade can be extended by simply pressing the locking sleeve. The tool can now be used as a fully-fledged screwdriver. ds: dsc: Scope of delivery Kraftform Kompakt 26 RA-R with pouch, 6 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 800/1 BTZ bits: 0.8x5.5x25 mm, 1.2x6.5x25 mm 2x 868/1 Z Square-Plus bits: # 1x25 mm, # 2x25 mm kts: bit set with case, 6-piece kpn: Kraftform Kompakt 26 RA-R kpn_dash: Kraftform Kompakt 26 RA kpn_clear: KraftformKompakt26RAR bkpn: WERA Kraftform Kompakt 26 RA-R bkpn_clear: WERA KraftformKompakt26RAR c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051516001 sr_ns: WERA05051516001
r: 08103836 p: 51.074 pid: 70435 b: WERA q: 0 st: lt: 8 ean: 4013288229854 sr: WERA 05020234001 sr_no_br: 05020234001 sr_no_br_cl: 05020234001 sr_cl: WERA05020234001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 8 mm Max. width across flats 19 mm Supplied in On rack Quantity per set 5 Product Range Wera Joker n: WERA 9641 magneetstrip 6003 Joker 2 ring spanner set 6-piece - 05020234001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description Ring spanner set, 5-piece set, metric sizes; on a magnetic rail. With the combination of the 7.5° offset open end and the double hexagon geometry, the Joker 6003 doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. This makes screwdriving much easier, especially in confined spaces. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy Tool finder: Colour coding by size. The strip terminals hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. 5-piece set With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. The clips hold the tools perfectly Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool Combination wrench set, open end side offset by 7,5°5-piece setOn a magnetic rail Features and benefits The high-quality aluminium magnetic rail offers space for up to 11 spanners. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. ds: dsc: Scope of delivery 9641 Magnetic rail 6003 Joker 2 Ring spanner set, 5 pieces 5x 6003 Joker Combination wrench: 8x115 mm, 10x125 mm, 13x160 mm, 17x190 mm, 19x230 mm 1x 9610 Joker Magnetic rail, for up to 11 spanners, empty: 30 x 370 mm kts: ring spanner set 6-piece kpn: 9641 magneetstrip 6003 Joker 2 kpn_dash: kpn_clear: 9641magneetstrip6003Joker2 bkpn: WERA 9641 magneetstrip 6003 Joker 2 bkpn_clear: WERA 9641magneetstrip6003Joker2 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020234001 sr_ns: WERA05020234001
r: 02953265 p: 49.421 pid: 32772 b: WERA q: 0 st: lt: 15 ean: 4013288208842 sr: WERA 05005081001 sr_no_br: 05005081001 sr_no_br_cl: 05005081001 sr_cl: WERA05005081001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 5 mm Drive type External hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 Hex torque indicator 5 x 5.0 Nm - 05005081001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for hexagon sockets. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application Hexagon socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Hex-Plus, brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Torque-indicator with pre-set and tamperproof torque value Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 Hex Torque-indicator, 5 mm x 5.0 Nm kts: torque indicator 5 x 5.0 Nm kpn: 400 Hex kpn_dash: kpn_clear: 400Hex bkpn: WERA 400 Hex bkpn_clear: WERA 400Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005081001 sr_ns: WERA05005081001
r: 08131771 p: 49.421 pid: 173573 b: WERA q: 0 st: lt: 8 ean: 4013288234087 sr: WERA 05051535001 sr_no_br: 05051535001 sr_no_br_cl: 05051535001 sr_cl: WERA05051535001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 7 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Pistol RA-R 1 bit set, 7-piece - 05051535001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform pistol handle for 1/4" hex drive bits. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The Rapidaptor technology of the bitholding screwdriver makes for a quick bit change. Includes 6 BiTorsion bits for a long product life, tough, for universal use; stored in the bit magazine integrated in the handle. The strong permanent magnet in the 1/4" bit mounting ensures secure holding of the bit. The 2-component Kraftform pistol handle allows for high leverage. The robust holster can be attached to the belt. The ratchet with fine toothing integrated in the handle allows fast working The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw Intuitive switching: If I turn the switch clockwise - the ratchet turns clockwise, if I turn the switch counterclockwise - it goes counterclockwise Integrated bit magazine with 6x 25 mm bits BiTorsion Bits Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4 Design Ratchet with fine toothing integrated in the handle, intuitive switching, use position 0 to deactivate the ratchet mechanism for precise working; 1/4" hexagonal bit mounting, magnetic. Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand functions. 6 BiTorsion bits for a long product life, tough, for universal use. Take it easy tool finder: with colour coding by tip and size stamping for easy identification of the required bit. With robust holster that can be attached to the belt. Handle Kraftform pistol handle, multi-component, integrated magazine Features and benefits The ratchet with fine toothing integrated in the handle allows fast working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. Intuitive switching of the ratchet mechanism. Turn the switch clockwise for clockwise screwdriving; turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Kraftform Kompakt Pistol RA-R 1, 7 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm 2x 867/1 BTZ TORX® bits: TX 20x25 mm, TX 25x25 mm 1x 814 RA-R Pistol handle with ratchet functionality: 1/4" kts: bit set, 7-piece kpn: Kraftform Kompakt Pistol RA-R 1 kpn_dash: Kraftform Kompakt Pistol RA kpn_clear: KraftformKompaktPistolRAR1 bkpn: WERA Kraftform Kompakt Pistol RA-R 1 bkpn_clear: WERA KraftformKompaktPistolRAR1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051535001 sr_ns: WERA05051535001
