r: 08103835 p: 104.297 pid: 71000 b: WERA q: 0 st: lt: 8 ean: 4013288228963 sr: WERA 05020233001 sr_no_br: 05020233001 sr_no_br_cl: 05020233001 sr_cl: WERA05020233001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 11 mm Max. width across flats 19 mm Supplied in On rack Quantity per set 11 Product Range Wera Joker n: WERA 9640 magneetstrip 6003 Joker 1 ring spanner set 12-piece - 05020233001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description Ring spanner set, 11-piece set, metric sizes; on a magnetic rail. With the combination of the 7.5° offset open end and the double hexagon geometry, the Joker 6003 doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. This makes screwdriving much easier, especially in confined spaces. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy Tool finder: Colour coding by size. The clips hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. 11-piece set With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. The clips hold the tools perfectly Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool Combination wrench set, open end side offset by 7,5°11-piece setOn a magnetic rail Features and benefits The high-quality aluminium magnetic rail offers space for up to 11 spanners. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. ds: dsc: Scope of delivery 9640 Magnetic rail 6003 Joker 1 Ring spanner set, 11 pieces 11x 6003 Joker Combination wrench: 11x135 mm, 12x148 mm, 14x167 mm, 15x174 mm, 16x182 mm, 18x210 mm, 8x115 mm, 10x125 mm, 13x160 mm, 17x190 mm, 19x230 mm 1x 9610 Joker Magnetic rail, for up to 11 spanners, empty: 30 x 370 mm kts: ring spanner set 12-piece kpn: 9640 magneetstrip 6003 Joker 1 kpn_dash: kpn_clear: 9640magneetstrip6003Joker1 bkpn: WERA 9640 magneetstrip 6003 Joker 1 bkpn_clear: WERA 9640magneetstrip6003Joker1 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020233001 sr_ns: WERA05020233001
r: 03229852 p: 102.809 pid: 70540 b: WERA q: 0 st: lt: 12 ean: 4013288196569 sr: WERA 05078708001 sr_no_br: 05078708001 sr_no_br_cl: 05078708001 sr_cl: WERA05078708001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 3/4" Type of drive profile External square Connection size 14 x 18 mm Connection profile External rectangle n: WERA 7782 E plug-in ratchet switchable, 14x18 mm, 3/4" x 90 mm - 05078708001 cn: RATCHET HEAD cn2: RATCHET HEAD cn_clear: RATCHETHEAD d: Product description Ratchet insert, reversible, for 3/4" square socket wrench inserts and 3/4" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For 3/4" square socket wrench inserts and 3/4" connecting parts with square drive Fine toothing with 72 teeth Easy switching by knob Socket lock by push button Application For 3/4" square socket wrench inserts and 3/4" connecting parts with square drive Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design With reversing ratchet, push-button release, forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. Fine-pitched with 72 teeth for a return angle of only 5° For 3/4" square socket wrench inserts and 3/4" connecting parts with square drive. Easy switching by knob. Safe socket lock via push button The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7782 E Ratchet insert, reversible, 14x18 mm, 14x18 x 3/4" x 91 mm kts: plug-in ratchet switchable, 14x18 mm, 3/4" x 90 mm kpn: 7782 E kpn_dash: kpn_clear: 7782E bkpn: WERA 7782 E bkpn_clear: WERA 7782E c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet head sr_no_br_cl_ns: 05078708001 sr_ns: WERA05078708001
r: 03230170 p: 99.132 pid: 70573 b: WERA q: 0 st: lt: 13 ean: 4013288220202 sr: WERA 05136532001 sr_no_br: 05136532001 sr_no_br_cl: 05136532001 sr_cl: WERA05136532001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Accessory/Part type Carrying bag Product Range Wera Click-Torque n: WERA 9460 fabric case for Click-Torque E 1, empty, 1285 x 84 x 82 mm - 05136532001 cn: ACCESSORY/PART TORQUE TOOL cn2: ACCESSORY/PART TORQUE TOOL cn_clear: ACCESSORYPARTTORQUETOOL d: Product description Robust, rigid material Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage Low weight for easy transport Features and benefits ds: dsc: Scope of delivery 9460 Textile Box Click-Torque E 1, empty, 1285 x 84 x 82 mm kts: fabric case for Click-Torque E 1, empty, 1285 x 84 x 82 mm kpn: 9460 kpn_dash: kpn_clear: 9460 bkpn: WERA 9460 bkpn_clear: WERA 9460 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Accessory/part torque tool | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera accessory/part torque tool | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05136532001 sr_ns: WERA05136532001
r: 03229734 p: 99.132 pid: 71048 b: WERA q: 0 st: lt: 12 ean: 4013288188298 sr: WERA 05074828010 sr_no_br: 05074828010 sr_no_br_cl: 05074828010 sr_cl: WERA05074828010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7456 ESD Kraftform torque screwdriver with quick-change holder 0.3-1.0 Nm - 05074828010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed within the measuring range with the extra tool 05137003001. Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, with quick-release chuck, 7456 ESD x 0.3-1.0 Nm kts: Kraftform torque screwdriver with quick-change holder 0.3-1.0 Nm kpn: 7456 ESD kpn_dash: kpn_clear: 7456ESD bkpn: WERA 7456 ESD bkpn_clear: WERA 7456ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074828010 sr_ns: WERA05074828010
r: 08107990 p: 97.851 pid: 159685 b: WERA q: 0 st: lt: 8 ean: 4013288230058 sr: WERA 05006641001 sr_no_br: 05006641001 sr_no_br_cl: 05006641001 sr_cl: WERA05006641001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon Type of drive profile (bit) Mixed VDE approved Yes With safety colour code 1000V Yes ESD No Supplied in Case Product Range Wera Kraftform Kompakt n: WERA 05006641001 Kraftform Kompakt Turbo i Imperial 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Many users wish to carry out screwdriving operations faster without compromises. With a screwdriver which is precise, allows powerful end screwdriving and is also much faster than a conventional screwdriver. The solution: A planetary drive that can be switched on and off: Integrated in the handle it quadruples the working speed in smooth couplings all mechanically. One hand holds the front part of the handle, the second hand turns the back part of the handle. The turbo function can be switched on and off at the push of a button. Turning it off is recommended for tightening and loosening with high torque as well as for fine adjustments. Robust, maintenance-free steel drive with maximum torque of 14 Nm when the turbo function is deactivated. In the VDE version, the 827 T i Kraftform Turbo bitholding screwdriver with the Wera VDE blades individually tested as per IEC 60900 ensures fast and safe working even under tension (up to 1,000 volt). VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. 4 times the screwdriving speed thanks to the turbo function (purely mechanical - without battery) Activate and deactivate the turbo function by a simple push of a button Turbo function especially for smooth couplings Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque Robust, maintenance-free gear made of steel 16-piece setOne Kraftform 817 VDE bladeholding handle and one 827 T i Kraftform Turbo bladeholding handle; both solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter and integrated protective insulation, low-lying screw and spring elements can be easily reached and operated (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter).In a robust belt pouch Features and benefits The construction of the Kraftform Turbo allows the speed of manual screwdriving to be quadrupled, especially for smooth couplings - without electricity! The robust steel design is maintenance-free and ensures a long product life. With its 9 mm mounting, the Kraftform Turbo is suitable for all Wera Kraftform Kompakt VDE interchangeable blades. The "holder/interchangeable blade system" stands for flexible working with many screw profiles. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque as well as for fine adjustments. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. ds: dsc: Scope of delivery Kraftform Kompakt Turbo i Imperial 1 Tool finder, 16 pieces 1x 827 T i Kraftform Turbo bladeholding handle: 9 x 125 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 2x Kraftform Kompakt VDE 68 iS Take it easy: # 1x157 mm, # 2x157 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: Kraftform Kompakt Turbo i Imperial 1 Tool Finder, 16-piece kpn: 05006641001 kpn_dash: kpn_clear: 05006641001 bkpn: WERA 05006641001 bkpn_clear: WERA 05006641001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006641001 sr_ns: WERA05006641001
r: 03229731 p: 94.049 pid: 69763 b: WERA q: 0 st: lt: 12 ean: 4013288188281 sr: WERA 05074826010 sr_no_br: 05074826010 sr_no_br_cl: 05074826010 sr_cl: WERA05074826010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7455 ESD Kraftform torque screwdriver with quick-change holder 0.1-0.34 Nm - 05074826010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed within the measuring range with the extra tool 05137003001. Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, with quick-release chuck, 7455 ESD x 0.1-0.34 Nm kts: Kraftform torque screwdriver with quick-change holder 0.1-0.34 Nm kpn: 7455 ESD kpn_dash: kpn_clear: 7455ESD bkpn: WERA 7455 ESD bkpn_clear: WERA 7455ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074826010 sr_ns: WERA05074826010
r: 08131712 p: 91.9 pid: 173534 b: WERA q: 0 st: lt: 8 ean: 4013288233561 sr: WERA 05005591001 sr_no_br: 05005591001 sr_no_br_cl: 05005591001 sr_cl: WERA05005591001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (socket) Hexagonal Connection size 3/8" Smallest size 1/4 inch Largest size 3/4 inch Quantity per set 9 n: WERA 9661 cap-magnet strip B Impaktor Deep Imperial 1 socket set, 3/8" drive, 9-piece - 05005591001 cn: IMPACT SOCKET SET cn2: IMPACT SOCKET SET cn_clear: IMPACTSOCKETSET d: Product description Socket rail with 9 long Impaktor sockets, 3/8". The Impaktor technology ensures higher-than-average service life even at extreme requirements. Long design to work even on low-lying couplings and protruding thread rods. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. The rail allows temporary attachment to metallic surfaces and, with its twist-to-unlock function, ensures secure locking and unlocking of the sockets. 9-piece socket set on socket rail, 3/8" Imperial sizes Magnetic rail with secure socket mounting and yet easy removal (twist-to-unlock) for temporary attachment on wall, shelf or workshop trolley Robust Impaktor sockets for extremely high stress; for use with electric or pneumatic wrenches with 3/8" drive Long sockets for low lying couplings, also suitable for fitting, protruding thread rods in confined spaces 9-piece set; on a magnetic rail for temporary attachment on wall, shelf or workshop trolley. Smooth rotary mechanism for safe storage and easy access of the tools.9 Impaktor sockets with 3/8" drive. Long design for low-lying couplings and protruding thread rods. With hexagon profile and socket with hole. For use with electric or pneumatic wrenches with 3/8" drive. Take it easy toolfinder: with colour coding by size - for quick and easy identification of the required tool. Features and benefits The extremely robust forged design ensures higher-than-average service life of the Impaktor sockets even at extreme requirements. Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). With its twist-to-unlock mechanism, the socket rail ensures easy access of the sockets. At the same time the sockets are held securely. Thanks to the magnet, the rail is suitable for temporary attachment to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9661 Magnetic rail B Impaktor Deep Imperial 1 socket set, 3/8" drive, 9 pieces 9x 8790 B Impaktor Deep Socket with 3/8" drive: 1/4"x63 mm, 5/16"x63 mm, 3/8"x63 mm, 7/16"x63 mm, 1/2"x63 mm, 9/16"x63 mm, 5/8"x63 mm, 11/16"x63 mm, 3/4"x63 mm 1x 9601 Magnetic socket rail, 3/8", empty: 30 x 340 mm kts: cap-magnet strip B Impaktor Deep Imperial 1 socket set, 3/8" drive, 9-piece kpn: 9661 kpn_dash: kpn_clear: 9661 bkpn: WERA 9661 bkpn_clear: WERA 9661 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Impact socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera impact socket set sr_no_br_cl_ns: 05005591001 sr_ns: WERA05005591001
r: 08131816 p: 91.694 pid: 173606 b: WERA q: 0 st: lt: 8 ean: 4013288234773 sr: WERA 05049025001 sr_no_br: 05049025001 sr_no_br_cl: 05049025001 sr_cl: WERA05049025001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_312 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Plastic holder Quantity per set 50 Product Range Wera Tool-Check n: WERA Tool-Check Modular Set Imperial 1 tool set, 50-piece - 05049025001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Very compact tool set: Tool-Check Modular Set imperial 1. Includes: one Tool-Check Modular 1, one Tool-Check Modular Micro 1, one Tool-Check Modular L-key Hex-Plus 1 (metric), one adapter and one flexible hinge (adapter and hinge for connecting Tool-Check Modular products). Tool-Check Modular: individual combination of different Tool-Check Modular components Includes: one Tool-Check Modular Set Imperial 1, one Tool-Check Modular Micro 1, one Tool-Check Modular L-key Hex-Plus 1 (metric), one adapter and one flexible hinge (adapter and hinge for connecting Tool-Check Modular products) Tool-Check Modular Imperial 1: 21-piece tool set for manual and machine-operated screwdriving Tool-Check Modular Micro 1: 21-piece tool set for precision mechanical couplings Tool-Check Modular L-keys Hex-Plus 1: 7-piece L-key set for hexagonal socket screws (metric) Very compact tool set: Tool-Check Modular Set Imperial 1. Includes: one Tool-Check Modular Imperial 1 (one Kraftform 815/1 bitholding screwdriver for bits with 1/4" external hexagon drive, one 8011 Zyklop Mini 4 bit ratchet (1/4"), one 870/1 adapter (1/4" external hexagon to 1/4" external square head), one magnetic 899/4/1 bit holder for screwdriver machines, 13 bits with 1/4" external hexagon drive for Phillips-head screws (Phillips and Pozidriv), TORX®, hexagonal socket and slotted screws, 4 Zyklop 8790 HMA sockets, 1/4" (3/8; 7/16"; 1/2"; 9/16")), one Tool-Check Modular Micro 1 (one Kraftform Micro 1014 bitholding screwdriver for 4 mm bits, 20 bits with 4 mm external hexagon drive (Phillips-head screws (Phillips and Pozidriv), TORX®, hexagonal socket and slotted screws)), one Tool-Check Modular L-key Hex-Plus 1 for hexagonal socket screws (7-piece set, 1.5; 2.0; 2.5; 3.0; 4.0; 5.0; 6.0), one adapter and one flexible hinge (adapter and hinge for connecting Tool-Check Modular products). Features and benefits The Tool-Check Modular system offers the possibility of combining Tool-Check Modular products in a super-compact manner depending on requirements. All you need is the rigid adapter 9549 and the flexible hinge 9550, both included in the set. The Tool-Check Modular products can be combined, exchanged or expanded at any time. 21-piece tool set. With bitholding screwdriver for 1/4" hex drive bits, bit ratchet for 1/4" hex drive bits, bit holder for mechanical screwdriving, 13 bits, adapter 870/1 (1/4" external hexagon to 1/4" external square head) for 1/4" sockets, 1/4" Zyklop 8790 HMA sockets. 22-piece tool set (Kraftform Micro 1014 bitholding screwdriver, bits with 4 mm external hexagon drive). Very compact storage in the Tool-Check Modular. 7-piece L-key set. Very compact storage in the Tool-Check Modular. Compact connection of two Tool-Check Modular products with the rigid connector 9549. Flexible and compact connection of two Tool-Check Modular products with the connector 9550. The hinge 9550 allows compact folding up of two Tool-Check Modular products. ds: dsc: Scope of delivery Tool-Check Modular Set Imperial 1, 50 pieces 1x Tool-Check Modular Imperial 1, 21 pieces 1x 815/1 Bitholding screwdriver: 1/4" x 78 mm 1x 8011 Zyklop Mini 4 Bit ratchet, 1/4": 1/4" x 50 mm 1x 870/1 Adaptor: 1/4" x 25 mm 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 2x 851/4 BTZ bits: PH 1x50 mm, PH 2x50 mm 4x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 1x 800/4 BTZ bits: 0.8 x 5.5 x 50 mm 4x 840/1 Z bits: 3/32"x25 mm, 1/8"x25 mm, 5/32"x25 mm, 3/16"x25 mm 2x 868/4 BTZ Square-Plus bits: # 1x50 mm, # 2x50 mm 4x 8790 HMA Zyklop 1/4" socket: 3/8"x23 mm, 7/16"x23 mm, 1/2"x23 mm, 9/16"x23 mm 1x Tool-Check Modular Micro 1, 21 pieces 1x 1014 Kraftform Micro Bitholding screwdriver: 4 x 80 mm 4x 851/0 Micro bits for Phillips screws: PH 000x30 mm, PH 00x30 mm, PH 0x30 mm, PH 1x30 mm 2x 855/0 Micro bits suitable for Pozidriv screws: PZ 0x30 mm, PZ 1x30 mm 6x 867/0 Micro bits for TORX® socket screws: TX 3x30 mm, TX 4x30 mm, TX 5x30 mm, TX 6x30 mm, TX 8x30 mm, TX 10x30 mm 5x 840/0 Hex-Plus Micro bits for hexagonal socket head screws: 0.9x30 mm, 1.3x30 mm, 1.5x30 mm, 2x30 mm, 2.5x30 mm 3x 800/0 Micro bits for slotted screws: 0.3x1.5x30 mm, 0.40x2.5x30 mm, 0.50x3x30 mm 1x Tool-Check Modular L-keys Hex-Plus 1, 7 pieces 7x 950 L-key, metric, chrome-plated: 1.5x45 mm, 2x50 mm, 2.5x56 mm, 3x63 mm, 4x70 mm, 5x80 mm, 6x90 mm 1x 9549 Adapter for Tool-Check Modular, 10.5 x 47 x 16.5 mm 1x 9550 Hinge for Tool-Check Modular, 67.5 x 91 x 22 mm kts: tool set, 50-piece kpn: Tool-Check Modular Set Imperial 1 kpn_dash: Tool kpn_clear: ToolCheckModularSetImperial1 bkpn: WERA Tool-Check Modular Set Imperial 1 bkpn_clear: WERA ToolCheckModularSetImperial1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera tool-check sr_no_br_cl_ns: 05049025001 sr_ns: WERA05049025001
r: 03229722 p: 91.404 pid: 70498 b: WERA q: 0 st: lt: 12 ean: 4013288188205 sr: WERA 05074820010 sr_no_br: 05074820010 sr_no_br_cl: 05074820010 sr_cl: WERA05074820010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7450 ESD Kraftform torque screwdriver with 89mm handle 0.1-0.34 Nm - 05074820010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 ESD x 0.1-0.34 Nm kts: Kraftform torque screwdriver with 89mm handle 0.1-0.34 Nm kpn: 7450 ESD kpn_dash: kpn_clear: 7450ESD bkpn: WERA 7450 ESD bkpn_clear: WERA 7450ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074820010 sr_ns: WERA05074820010
r: 02836477 p: 90.578 pid: 31653 b: WERA q: 0 st: lt: 16 ean: 4013288173904 sr: WERA 05004020001 sr_no_br: 05004020001 sr_no_br_cl: 05004020001 sr_cl: WERA05004020001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 28 Product Range Wera Zyklop n: WERA 8100 SA 10 zyklop metal ratchet set, 1/4 drive, inch (28 -piece) - 05004020001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. Take it easy Tool Finder with colour coding according to sizes. Extremely slim ratchet with long lever Return angle of only 4.7° Absolutely smooth switchover of the non-detachable push-through square With Take it easy tool finder: colour coding by size 28-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility1 Zyklop Metal Ratchet with push-through square and 1/4" drive, 9 Zyklop sockets, 1 Zyklop extension (long) with free-turning sleeve, 1 "Wobble" extension, 1 adaptor with quick-release chuck, 15 bits Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces. Smooth push-through mechanism, that cannot get lost. The dual-ratchet-teeth design means that a 76 fine-toothing division can be achieved from the 38 robust teeth with a return angle of only 4.7°. The ball lock ensures sockets and accessories fit securely, providing increased safety during operation. A short press on the release button allows the tool to be changed quickly. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. ds: dsc: Scope of delivery 8100 SA 10 Zyklop Metal Ratchet Set with push-through square, 1/4" drive, imperial, 28 pieces 1x 8003 A Zyklop Metal Ratchet with push-through square and 1/4" drive: 1/4" x 141 mm 9x 8790 HMA Zyklop 1/4" socket: 3/16"x23 mm, 7/32"x23 mm, 1/4"x23 mm, 9/32"x23 mm, 5/16"x23 mm, 11/32"x23 mm, 3/8"x23 mm, 7/16"x23 mm, 1/2"x23 mm 1x 8794 LA Zyklop extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 3x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 6x 867/1 TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 27x25 mm, TX 30x25 mm 4x 840/1 Z bits: 5/32"x25 mm, 3/16"x25 mm, 7/32"x25 mm, 1/4"x25 mm kts: zyklop metal ratchet set, 1/4 drive, inch (28 -piece) kpn: 8100 SA 10 kpn_dash: kpn_clear: 8100SA10 bkpn: WERA 8100 SA 10 bkpn_clear: WERA 8100SA10 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004020001 sr_ns: WERA05004020001
r: 03229640 p: 87.933 pid: 71035 b: WERA q: 0 st: lt: 8 ean: 4013288188199 sr: WERA 05074728010 sr_no_br: 05074728010 sr_no_br_cl: 05074728010 sr_cl: WERA05074728010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4-8,8 Nm Max. tightening torque 8,8 Nm Product Range Wera Kraftform n: WERA 7463 Kraftform torque screwdriver with pistol grip 4.0-8.8 Nm - 05074728010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with pistol handle Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Multi-component Kraftform handle for high working speeds Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. Unlimited torque for loosening seized screws. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7463 x 4.0-8.8 Nm kts: Kraftform torque screwdriver with pistol grip 4.0-8.8 Nm kpn: 7463 kpn_dash: kpn_clear: 7463 bkpn: WERA 7463 bkpn_clear: WERA 7463 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074728010 sr_ns: WERA05074728010
r: 03229723 p: 85.909 pid: 71799 b: WERA q: 0 st: lt: 12 ean: 4013288188212 sr: WERA 05074822010 sr_no_br: 05074822010 sr_no_br_cl: 05074822010 sr_cl: WERA05074822010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 ESD Kraftform torque screwdriver with 89mm handle 0.3-1.0 Nm - 05074822010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 ESD x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle 0.3-1.0 Nm kpn: 7451 ESD kpn_dash: kpn_clear: 7451ESD bkpn: WERA 7451 ESD bkpn_clear: WERA 7451ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074822010 sr_ns: WERA05074822010
r: 02836012 p: 84.958 pid: 42083 b: WERA q: 0 st: lt: 12 ean: 4013288179050 sr: WERA 05074828001 sr_no_br: 05074828001 sr_no_br_cl: 05074828001 sr_cl: WERA05074828001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7456 ESD Kraftform adjustable torque screwdriver with standard setting and quick-change holder 0.3 Nm x 0.3-1.0 Nm - 05074828001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Kraftform handle for fast and ergonomic screwdriving Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque 0.1 Nm, 0.3 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.0 Nm) and quick-release chuck, 7456 ESD x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform adjustable torque screwdriver with standard setting and quick-change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7456 ESD kpn_dash: kpn_clear: 7456ESD bkpn: WERA 7456 ESD bkpn_clear: WERA 7456ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074828001 sr_ns: WERA05074828001
r: 03229724 p: 84.256 pid: 70083 b: WERA q: 0 st: lt: 12 ean: 4013288188229 sr: WERA 05074824010 sr_no_br: 05074824010 sr_no_br_cl: 05074824010 sr_cl: WERA05074824010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 ESD Kraftform torque screwdriver with 89mm handle 0.9-1.5 Nm - 05074824010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 ESD x 0.9-1.5 Nm kts: Kraftform torque screwdriver with 89mm handle 0.9-1.5 Nm kpn: 7452 ESD kpn_dash: kpn_clear: 7452ESD bkpn: WERA 7452 ESD bkpn_clear: WERA 7452ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074824010 sr_ns: WERA05074824010
r: 02836011 p: 82.148 pid: 43828 b: WERA q: 0 st: lt: 12 ean: 4013288179067 sr: WERA 05074826001 sr_no_br: 05074826001 sr_no_br_cl: 05074826001 sr_cl: WERA05074826001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7455 ESD Kraftform adjustable torque screwdriver standard setting and quick-change holder 0.1 Nm x 0.1-0.34 Nm - 05074826001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Kraftform handle for fast and ergonomic screwdriving Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque 0.1 Nm, 0.3 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.0 Nm) and quick-release chuck, 7455 ESD x 0.1 Nm x 0.1-0.34 Nm kts: Kraftform adjustable torque screwdriver standard setting and quick-change holder 0.1 Nm x 0.1-0.34 Nm kpn: 7455 ESD kpn_dash: kpn_clear: 7455ESD bkpn: WERA 7455 ESD bkpn_clear: WERA 7455ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074826001 sr_ns: WERA05074826001
r: 08103847 p: 81.487 pid: 159366 b: WERA q: 0 st: lt: 8 ean: 4013288222060 sr: WERA 05547619001 sr_no_br: 05547619001 sr_no_br_cl: 05547619001 sr_cl: WERA05547619001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Product Range Wera Click-Torque n: WERA 9925 ratchet repair kit for Click-Torque E 1 Push R/L torque spanner - 05547619001 cn: REPAIR KIT cn2: REPAIR KIT cn_clear: REPAIRKIT d: ds: dsc: Scope of delivery Spring Steel ball Blocking element/rattle ratchet Ratchet inner part Push 3/4 Square 3/4" Ratchet head cover 2 screws for ratchet head cover Ratchet head cover Countersunk screw Würth 423635 16 kts: ratchet repair kit for Click-Torque E 1 Push R/L torque spanner kpn: 9925 kpn_dash: kpn_clear: 9925 bkpn: WERA 9925 bkpn_clear: WERA 9925 c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Repair kit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera repair kit | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05547619001 sr_ns: WERA05547619001
r: 08103837 p: 80.33 pid: 71005 b: WERA q: 0 st: lt: 8 ean: 4013288229878 sr: WERA 05020235001 sr_no_br: 05020235001 sr_no_br_cl: 05020235001 sr_cl: WERA05020235001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 5/16 inch Max. width across flats 11/16 inch Supplied in On rack Quantity per set 8 Product Range Wera Joker n: WERA 9642 magneetstrip 6003 Joker Imperial 1 ring spanner set 9-piece - 05020235001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description Ring spanner set, 8-piece set, imperial sizes; on a magnetic rail. With its combination of the 7.5° offset open end and the double hexagon geometry, the Joker 6003 doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. This makes screwdriving much easier, especially in confined spaces. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy Tool finder: Colour coding by size. The clip hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. Imperial 8-piece set With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. The clips hold the tools perfectly Especially suitable for tight spaces Combination wrench set, open end side offset by 7,5°8-piece setOn a magnetic rail Features and benefits The high-quality aluminium magnetic rail offers space for up to 11 spanners. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. ds: dsc: Scope of delivery 9642 Magnetic rail 6003 Joker Imperial 1 Ring spanner set, 8 pieces 8x 6003 Joker Combination wrench, Imperial: 5/16"x115 mm, 3/8"x125 mm, 1/2"x160 mm, 9/16"x167 mm, 3/4"x230 mm, 7/16"x135 mm, 5/8"x182 mm, 11/16"x210 mm 1x 9610 Joker Magnetic rail, for up to 11 spanners, empty: 30 x 370 mm kts: ring spanner set 9-piece kpn: 9642 magneetstrip 6003 Joker Imperial 1 kpn_dash: kpn_clear: 9642magneetstrip6003JokerImperial1 bkpn: WERA 9642 magneetstrip 6003 Joker Imperial 1 bkpn_clear: WERA 9642magneetstrip6003JokerImperial1 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020235001 sr_ns: WERA05020235001
r: 08131701 p: 77.52 pid: 173480 b: WERA q: 0 st: lt: 8 ean: 4013288234926 sr: WERA 05004187001 sr_no_br: 05004187001 sr_no_br_cl: 05004187001 sr_cl: WERA05004187001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 41 n: WERA Bicycle Set 3 tool set, 41-piece - 05004187001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description Bike tool set with ratchet, bits, sockets and a bitholding screwdriver in the very compact Tool-Check. Perfect as a universal companion for a multitude of screwdriving applications. Premium bitholding screwdriver with Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, soft handle zones for a high torque transfer. Bit ratchet for quick working when screwdriving with a machine or conventional hand tool is not possible due to space constraints. Rapid reversing from clockwise to counterclockwise rotation and vice versa via the reversing lever. The knurling on the ratchet head allows for quick rotation (with the thumb). Easiest operation, even with just one hand. Ergonomic ratchet head/lever: Kraftform geometry with perfectly shaped contact surfaces for the fingers. Smallest possible tool design thanks to the direct bit mounting in the ratchet head, perfect for low working heights. Small return angle of 6° for precise working. Robust drop-forged solid steel design. Torques of over 65 Nm. The Rapidaptor bitholding screwdriver with fast-rotating sleeve: Can be used as an extension, for lightning-fast bit changes of even the smallest bit sizes with just one hand. Bits (BTZ) with BiTorsion zone to cushion peak loads for universal use; tough bits (Z) for universal use. Hand and machine sockets for nearly all applications. With Take it easy tool finder: colour coding by size - for quick and easy identification of the required tool. Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon bolts and screws. Made of matte chrome-plated chrome-vanadium. With the glass fibre reinforced plastic tyre levers, the tyres can be safely levered off the rim without damaging the rim. Take a selection of tools out and about with you in the included Bit-Check. With a robust tool pouch. Compact 41-piece screwdriving tool set for bicycle operations, also for mobile use Tool-Check with green locking elements to secure the tools Practical range for DIY assembly work and repairs Tools for the most popular screw profiles on road bikes, mountain bikes and e-bikes With Take it easy tool finder: colour coding by size 28 bits, BTZ design with BiTorsion zone (prevents the bit from breaking prematurely) and Take it easy tool finder: colour coding by profile and size stamping, one 813 handle suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 , one Rapidaptor bitholding screwdriver suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4, one 870/1 adapter (1/4" hexagon to 1/4" square head), 7 sockets (1/4") with Take it easy tool finder: colour coding by size. One Wera Zyklop Mini 1 bit ratchet, drop-forged solid steel design; suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4; 1/4" sockets can also be used by connecting the Wera 870/1 adapter Features and benefits Bicycle Set 3 is a practical assortment for the independent execution of assembly work and repairs on road bikes, mountain bikes and e-bikes. Especially useful: a Bit-Check (empty) is also included, which can be equipped individually with tools on the way: less weight on bike rides. The green locking components of the Tool-Check secure the tool reliably during transport. At the same time, they are easy to operate and allow quick access to the tools. With their extremely compact design, the Zyklop Mini ratchets are particularly suitable for all hard-to-reach applications. 1/4" sockets can also be used with the Zyklop Mini bit ratchet by connecting the 870/1 adapter (1/4" hexagon to 1/4" square head). The Zyklop sockets are suitable for manual and machine-operated tools (non impact). They feature a ball stop groove and knurling at the rear end for manageability during manual use. They are made of chrome-vanadium, matte-chromed. Take it easy tool finder: colour coding by size as well as size stamping - to help you find the required socket quickly and easily. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery Bicycle Set 3, 41 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 813 Bitholding screwdriver: 1/4" x 78 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 1x 870/1 Adaptor: 1/4" x 25 mm 4x 851/1 BTZ bits: PH 1x25 mm, 2x PH 2x25 mm, PH 3x25 mm 9x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, 2x TX 20x25 mm, 2x TX 25x25 mm, TX 27x25 mm, TX 30x25 mm, TX 40x25 mm 3x 800/1 BTZ bits: 0.5x4x25 mm, 0.6x4.5x25 mm, 1x5.5x25 mm 6x 840/1 BTZ bits: 2x25 mm, 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm 1x 840/1 Z bits: 8 x 25 mm 5x 842/1 Z bits: 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm 7x 8790 HMA Zyklop 1/4" socket: 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 10x23 mm, 13x23 mm, 15x23 mm 1x 9502 Tyre jack with bit mounting: 105 mm 1x 9503 Tyre jack with valve ejector: 105 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: tool set, 41-piece kpn: Bicycle Set 3 kpn_dash: kpn_clear: BicycleSet3 bkpn: WERA Bicycle Set 3 bkpn_clear: WERA BicycleSet3 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set sr_no_br_cl_ns: 05004187001 sr_ns: WERA05004187001
r: 08085455 p: 76.363 pid: 70926 b: WERA q: 0 st: lt: 8 ean: 4013288222312 sr: WERA 05018111001 sr_no_br: 05018111001 sr_no_br_cl: 05018111001 sr_cl: WERA05018111001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 900 Imperial Set 1 impact screwdriver with bit set 19-piece - 05018111001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description The impact screwdriver 921 combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The impact wrench function offers a loosening moment of up to 25 Nm. The robust bit holder allows the mounting of different specialised bits for various screw profiles. The pound-thru blade ensures complete power transmission (zero loss). The impact wrench function and screwdriver function can be switched as required. Compact and robust interchangeable blade screwdriver set with manually activatable impact wrench function For loosening stubborn screw connections Hammer blow impulse is converted into a rotary movement with a loosening torque of approx. 25 Nm - without loss via a pound-thru blade Reversible functions: impact wrench and screwdriver Specially hardened and extra tough bits with 1/4" external hexagon drive Textile box with 1 impact screwdriver 921 and 18 impact screwdriver bits (70 mm length)19-piece set Features and benefits The 921 impact screwdriver combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The 921 impact screwdriver combines the advantages of interchangeable blade sets, chiseldrivers and manual impact wrenches. The manual impact wrench function can be switched on if required to loosen even stubborn screw connections. With the impact wrench function switched on, the hammer blow impulse is converted into a rotary movement with a loosening moment of up to 25 Nm. Power transmission without loss via a pound-thru blade. When the impact wrench function is deactivated, the hexagon bolster can be operated with a size 13 spanner for greater power transmission. The robust bit mounting is suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. The interchangeable blade system means low weight, reduced space requirement and high flexibility for the user. The Wera impact screwdriver bits are particularly suitable for use with the Wera 921 impact screwdriver. The extra tough bits stand out with their particularly long service life. Premature breakage is prevented. ds: dsc: Scope of delivery Kraftform Kompakt 900 Imperial Set 1, 19 pieces 1x 921 Kraftform Plus impact screwdriver - series 900: 1/4" x 163.5 mm 3x 851 S Phillips bits for impact screwdrivers: PH 1x70 mm, PH 2x70 mm, PH 3x70 mm 5x 867 S TORX® bits for impact screwdrivers: TX 15x70 mm, TX 20x70 mm, TX 25x70 mm, TX 30x70 mm, TX 40x70 mm 4x 840 S Hex-Plus bits for impact screwdrivers: 1/8"x70 mm, 5/32"x70 mm, 3/16"x70 mm, 1/4"x70 mm 3x 868 S Square head socket bits for impact screwdrivers: # 1x70 mm, # 2x70 mm, # 3x70 mm 3x 800 S Slotted bits for impact screwdrivers: 0.8x4x70 mm, 1x5.5x70 mm, 1.2x6.5x70 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: impact screwdriver with bit set 19-piece kpn: Kraftform Kompakt 900 Imperial Set 1 kpn_dash: kpn_clear: KraftformKompakt900ImperialSet1 bkpn: WERA Kraftform Kompakt 900 Imperial Set 1 bkpn_clear: WERA KraftformKompakt900ImperialSet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05018111001 sr_ns: WERA05018111001
r: 03229745 p: 75.537 pid: 70087 b: WERA q: 0 st: lt: 12 ean: 4013288188274 sr: WERA 05074721010 sr_no_br: 05074721010 sr_no_br_cl: 05074721010 sr_cl: WERA05074721010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 25 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 25-55 in lbs Max. tightening torque 55 in lbs Product Range Wera Kraftform n: WERA 7467 Kraftform torque screwdriver with pistol grip 25-55 in. lbs. - 05074721010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with pistol handle Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Multi-component Kraftform handle for high working speeds Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Pre-set torque, adjustable within a defined range. Also available in ESD version (also for HIOS/Halfmoon bits) and with Kraftform Micro handle. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The pre-set torque screwdrivers 7400, 1460, 1461 with a pre-set torque value can be set to any value within the specified metered range in the test laboratory. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7467 x 25-55 in. lbs. kts: Kraftform torque screwdriver with pistol grip 25-55 in. lbs. kpn: 7467 kpn_dash: kpn_clear: 7467 bkpn: WERA 7467 bkpn_clear: WERA 7467 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074721010 sr_ns: WERA05074721010
