r: 03320153 p: 19.669 pid: 178017 b: TEC7 q: 83 st: 1 lt: 1 ean: 5414195021842 sr: TEC7 530001000 sr_no_br: 530001000 sr_no_br_cl: 530001000 sr_cl: TEC7530001000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml EUH-statements EUH208 Relative density 1 ADR packing group ADR class 2 Color White Principal hazard property GHS02 Flammable UN number UN1950 Conseils de prudence (P) P102; P210; P211; P251; P410 + P412 H-statements H222; H229 Hazard class GHS02 Flammable Physical state Aerosol Packaging Spray can n: TEC7 ST7-101 MS polymer spray adhesive for thin bonding 750 ml - 530001000 cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description TEC7 SPRAY ADHESIVE FOR FULL-SURFACE BONDING All-surface bonding One-sided application Repositionable Also on damp surfaces (dry to the touch) Safe on all materials Bonding of all larger surfaces Contains no harmful solvents, isocyanates or phthalates Up to 5 m² adhesive surface per can High glue strength: 15 kg/cm² Instructions For detailed instructions: see processing guidelines Points of attention:ST7-101 SprayTec is suitable for thin bonding on flat surfaces. Unevenness must be less than 1 mm Apply to a dust- and grease-free substrate. The substrate must not be completely dry. No drops or layer of water must be visible Protect adjacent materials against overspray Test the adhesion on plastics, powder paints, exotic wood and bituminous materials Remove spills before curing with Spray & PUR Cleaner or Tec7 Cleaner. Cured SprayTec can only be removed mechanically Use: shake vigorously at least 20 times. Hold the can upside down when doing so. Shake regularly during use ds: dsc: kts: MS polymer spray adhesive for thin bonding 750 ml kpn: ST7-101 kpn_dash: ST7 kpn_clear: ST7101 bkpn: TEC7 ST7-101 bkpn_clear: TEC7 ST7101 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 adhesive | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 530001000 sr_ns: TEC7530001000
r: 03311147 p: 13.553 pid: 178018 b: TEC7 q: 0 st: lt: 6 ean: 5414195021484 sr: TEC7 602206000 sr_no_br: 602206000 sr_no_br_cl: 602206000 sr_cl: TEC7602206000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 870 ml EUH-statements EUH066 ADR packing group ADR class Color Black Principal hazard property GHS02 Flammable UN number Conseils de prudence (P) P101; P102; P210; P271; P280; P303 + P361 + P353; P304 + P340; P405; P501 H-statements H226; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point < 61 °C n: TEC7 WP7-301 roofing waterproof black 870 ml pot - 602206000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description REPAIR PASTE FOR ROOFING ROOFS Cold repair of leaks, cracks and blisters With rubber for long-lasting flexibility With bitumen for perfect sealing With fibres for lasting strength Ready for use and easy to spread Applicable on wet and dry surfaces, also vertically, and immediately waterproof and rainproof Adheres to most building materials and is compatible with all bituminous materials Can be finished with slate chippings for extra UV protection and walkability Instructions Apply to clean and stable substrate, free of ice or snow If necessary, clean and dry (without heating), remove loose parts and hardened bitumen, blisters in roof lining cut open in cross shape Reinforce large repairs with pieces of roofing or fibreglass tape Apply with sealant gun, brush or spatula Finish and clean tools with Tec7 Cleaner Do not use in ponds or watercourses, or on roofs that drain into ponds Layer thickness 2 mm, for grouting slate chippings, 1 mm thickness is sufficient 1 litre = 1 mm on 1m² ds: dsc: kts: roofing waterproof black 870 ml pot kpn: WP7-301 kpn_dash: WP7 kpn_clear: WP7301 bkpn: TEC7 WP7-301 bkpn_clear: TEC7 WP7301 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 602206000 sr_ns: TEC7602206000
r: 03203823 p: 13.388 pid: 155407 b: TEC7 q: 0 st: lt: 8 ean: 5414195535189 sr: TEC7 535108000 sr_no_br: 535108000 sr_no_br_cl: 535108000 sr_cl: TEC7535108000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color Black ADR packing group ADR class UN number Net volume 600 ml EUH-statements EUH208 Physical state Solid Packaging Sausage Colour (manufacturer) Black n: TEC7 535108000 all purpose slimmer black RAL 9004 in sausage (600 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer black RAL 9004 in sausage (600 ml) kpn: 535108000 kpn_dash: kpn_clear: 535108000 bkpn: TEC7 535108000 bkpn_clear: TEC7 535108000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535108000 sr_ns: TEC7535108000
r: 02950454 p: 11.26 pid: 156157 b: TEC7 q: 0 st: lt: 12 ean: 5414195501139 sr: TEC7 501913000 sr_no_br: 501913000 sr_no_br_cl: 501913000 sr_cl: TEC7501913000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 50 ml Conseils de prudence (P) P101; P102; P264; P271; P280; P304 + P340; P305 + P351 + P338; P405; P501 ADR packing group ADR class 9 UN number UN3334 Principal hazard property GHS07 Harmful or irritant EUH-statements EUH202 H-statements H315; H319; H335 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point 87 °C Packaging Bottle Color Transparent n: TEC7 501913000 Super super superglue 50 ml cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description HARD BROAD-SPECTRUM INSTANT ADHESIVE Cyanoacrylate adhesive Low viscosity and high adhesion For fast bonding and repair Small pot, great strength Super is a fast-curing adhesive based on cyanoacrylate Adhesives are resistant to temperatures from -30°C to +100°C Super bonds have high resistance to shearing forces and are shrink-proof Instructions Single-sided application on clean, dry, grease- and dust-free surface The thinner the adhesive layer, the stronger the bonding Press firmly for a few seconds ds: dsc: kts: Super super superglue 50 ml kpn: 501913000 kpn_dash: kpn_clear: 501913000 bkpn: TEC7 501913000 bkpn_clear: TEC7 501913000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 adhesive | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 501913000 sr_ns: TEC7501913000
r: 03300226 p: 11.18 pid: 178026 b: TEC7 q: 20 st: 1 lt: 1 ean: 5414195020630 sr: TEC7 535209000 sr_no_br: 535209000 sr_no_br_cl: 535209000 sr_cl: TEC7535209000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,62 ADR packing group ADR class UN number Net volume 400 ml EUH-statements EUH208 Physical state Solid Packaging Sausage Repaintable Yes Colour (manufacturer) White n: TEC7 535209000 all purpose slimmer white RAL 9016 in sausage (400 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer white RAL 9016 in sausage (400 ml) kpn: 535209000 kpn_dash: kpn_clear: 535209000 bkpn: TEC7 535209000 bkpn_clear: TEC7 535209000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535209000 sr_ns: TEC7535209000
r: 08102644 p: 11.18 pid: 178027 b: TEC7 q: 20 st: 1 lt: 1 ean: 5414195020968 sr: TEC7 535109000 sr_no_br: 535109000 sr_no_br_cl: 535109000 sr_cl: TEC7535109000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color Black EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 400 ml Physical state Solid Packaging Sausage Colour (manufacturer) Black n: TEC7 535109000 all-weather adhesive black RAL 9004 in sausage (400 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all-weather adhesive black RAL 9004 in sausage (400 ml) kpn: 535109000 kpn_dash: kpn_clear: 535109000 bkpn: TEC7 535109000 bkpn_clear: TEC7 535109000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535109000 sr_ns: TEC7535109000
r: 03320148 p: 11.18 pid: 178029 b: TEC7 q: 25 st: 1 lt: 1 ean: 5414195020975 sr: TEC7 535309000 sr_no_br: 535309000 sr_no_br_cl: 535309000 sr_cl: TEC7535309000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color Grey EUH-statements EUH208 Relative density 1,6 ADR packing group ADR class UN number Net volume 400 ml Physical state Solid Packaging Sausage Colour (manufacturer) Grey n: TEC7 535309000 all purpose slimmer grey RAL 7004 in sausage (400 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer grey RAL 7004 in sausage (400 ml) kpn: 535309000 kpn_dash: kpn_clear: 535309000 bkpn: TEC7 535309000 bkpn_clear: TEC7 535309000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535309000 sr_ns: TEC7535309000
r: 03300242 p: 11.03 pid: 178032 b: TEC7 q: 0 st: lt: 6 ean: 5414195020791 sr: TEC7 528087000 sr_no_br: 528087000 sr_no_br_cl: 528087000 sr_cl: TEC7528087000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Grey/Transparent Physical state Solid Fire resistant No Packaging Sausage Repaintable No n: TEC7 XEALPRO transparent grey sealant (600 ml sausage) - 528087000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: transparent grey sealant (600 ml sausage) kpn: XEALPRO kpn_dash: kpn_clear: XEALPRO bkpn: TEC7 XEALPRO bkpn_clear: TEC7 XEALPRO c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528087000 sr_ns: TEC7528087000
r: 03300241 p: 11.03 pid: 178031 b: TEC7 q: 0 st: lt: 6 ean: 5414195020739 sr: TEC7 528088000 sr_no_br: 528088000 sr_no_br_cl: 528088000 sr_cl: TEC7528088000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Transparent Physical state Solid Fire resistant No Packaging Sausage Repaintable No n: TEC7 XEALPRO transparent sealant (600 ml sausage) - 528088000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: transparent sealant (600 ml sausage) kpn: XEALPRO kpn_dash: kpn_clear: XEALPRO bkpn: TEC7 XEALPRO bkpn_clear: TEC7 XEALPRO c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528088000 sr_ns: TEC7528088000
r: 03300243 p: 11.03 pid: 178020 b: TEC7 q: 0 st: lt: 6 ean: 5414195020777 sr: TEC7 528081000 sr_no_br: 528081000 sr_no_br_cl: 528081000 sr_cl: TEC7528081000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) White Physical state Solid Fire resistant No Packaging Sausage Repaintable No n: TEC7 XEALPRO sealant white (600 ml sausage) - 528081000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test adhesion to plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant white (600 ml sausage) kpn: XEALPRO kpn_dash: kpn_clear: XEALPRO bkpn: TEC7 XEALPRO bkpn_clear: TEC7 XEALPRO c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528081000 sr_ns: TEC7528081000
r: 03300240 p: 11.03 pid: 178024 b: TEC7 q: 0 st: lt: 6 ean: 5414195020753 sr: TEC7 528085000 sr_no_br: 528085000 sr_no_br_cl: 528085000 sr_cl: TEC7528085000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208 ADR packing group ADR class UN number Colour (manufacturer) Concrete grey Physical state Solid Fire resistant No Packaging Sausage Repaintable No n: TEC7 XEALPRO sealant concrete grey (600 ml sausage) - 528085000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test adhesion to plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant concrete grey (600 ml sausage) kpn: XEALPRO kpn_dash: kpn_clear: XEALPRO bkpn: TEC7 XEALPRO bkpn_clear: TEC7 XEALPRO c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528085000 sr_ns: TEC7528085000
r: 03300239 p: 9.6 pid: 178041 b: TEC7 q: 0 st: lt: 8 ean: 5414195020678 sr: TEC7 528099000 sr_no_br: 528099000 sr_no_br_cl: 528099000 sr_cl: TEC7528099000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,48 ADR packing group ADR class Net volume 400 ml UN number EUH-statements EUH208 Physical state Solid Packaging Sausage n: TEC7 X-SEAL paintable sealant white in sausage (400 ml) - 528099000 cn: JOIN KIT cn2: JOIN KIT cn_clear: JOINKIT d: Product description SEAL EVERYTHING AND EVERYWHERE Extremely flexible and satin-coloured Adheres to most building materials, even wet ones Safe and mould-resistant Perfectly paintable Can be used indoors and outdoors Safe on all materials Bonds all larger surfaces Contains no harmful solvents, isocyanates or phthalates Up to 5 m² adhesive surface per can High glue strength: 15 kg/cm² Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Remove old sealants completely Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand-electric or air pistol Test adhesion to plastics such as PP, PE, silicones, powder paints, exotic woods and bituminous materials. If necessary, use PT7 as adhesive primer. Reinforce weak and/or porous substrates first with Poxy Primer Can be painted immediately after skin formation. Use paint or varnish according to the movement of the joint. Alkyd resin paints will cure delayed on uncured X-Seal Use Rock for permanent submersion, such as swimming pools ds: dsc: kts: paintable sealant white in sausage (400 ml) kpn: X-SEAL kpn_dash: X kpn_clear: XSEAL bkpn: TEC7 X-SEAL bkpn_clear: TEC7 XSEAL c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Join kit | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Joint sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 join kit sr_no_br_cl_ns: 528099000 sr_ns: TEC7528099000
r: 03371002 p: 9.13 pid: 178036 b: TEC7 q: 0 st: lt: 10 ean: 5414195024065 sr: TEC7 539306000 sr_no_br: 539306000 sr_no_br_cl: 539306000 sr_cl: TEC7539306000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 Relative density 1,02 ADR packing group ADR class UN number Colour (manufacturer) Grey/Transparent Physical state Solid Flash point 65 °C Fire resistant No Packaging Cartridge Repaintable No n: TEC7 ROCK flexible sealant and adhesive for natural stone and swimming pool transparent grey (310 ml) - 539306000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description FLEXIBLE SEALANT AND ADHESIVE FOR STONE, GLASS, SWIMMING POOL AND SANITARY FACILITIES High chemical resistance Mould- and bacteria-resistant Free of MEKO, phthalates, solvents and isocyanates No bleeding or staining Strong adhesion and permanently flexible Almost odourless, no bleeding through and no staining Safe application indoors and outdoors, also on damp, non-porous substrates Adheres without primer to most materials and is chlorine- and seawater-resistant after 7 days Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Test the adhesion on plastics, powder paints, exotic woods and bituminous materials. Reinforce weak and/or porous substrates first with Poxy Primer Swimming pool application: allow to cure for at least 7 days before contact with chlorinated water Ideal adhesive thickness for optimal bonding strength: 3 mm Consumption for jointing and sealing: Joint relationship: Joint width in mm: 5 10 15 20 25 Joint depth in mm: 5 6 10 10 If necessary, level the joint with convex backfilling ds: dsc: kts: flexible sealant and adhesive for natural stone and swimming pool transparent grey (310 ml) kpn: ROCK kpn_dash: kpn_clear: ROCK bkpn: TEC7 ROCK bkpn_clear: TEC7 ROCK c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 539306000 sr_ns: TEC7539306000
r: 03068684 p: 8.86 pid: 154926 b: TEC7 q: 12 st: 1 lt: 1 ean: 5414195004739 sr: TEC7 670010000 sr_no_br: 670010000 sr_no_br_cl: 670010000 sr_cl: TEC7670010000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml H-statements H222; H229; H302; H315; H317; H319; H334; H335; H351; H373 ADR packing group ADR class 2 UN number UN1950 Principal hazard property GHS02 Flammable Number of components 1 Conseils de prudence (P) P101; P102; P210; P211; P251; P308 + P313; P405; P410 + P412; P501 EUH-statements EUH204 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Based on Polyurethane Curing system Polymerisatie door (lucht-)vochtigheid Colour (manufacturer) Pink Fire resistant No n: TEC7 FoamTack PU foam (750 ml) - 670010000 cn: PU FOAM cn2: PU FOAM cn_clear: PUFOAM d: Product description GLUE PAD Easy to use Powerful bonding Low expansion For inside and outside All-season PU foam with very low post-expansion for inside and outside, applicable from -5°C to +30°C The first choice for all mounting and bonding applications where speed, strength and insulating power are important Good adhesion to all building materials, with excellent thermal and acoustic insulation properties Instructions Appropriate training must be completed by 24 August 2023 for industrial or professional use Shake canister vigorously for at least 30 sec Apply adhesive on clean and stable substrate Join parts together after about two minutes, before skin formation Support vertical bonds for about ten minutes if necessary Moisture misting before or after accelerates the reaction and promotes uniform cell formation Remove fresh foam with Tec7 PUR Cleaner and clean hands with Powerwipes. Remove cured foam with Remove All Not suitable for load-bearing construction elements No adhesion to PE, PP and other closed-cell plastics Can be loaded and finished after 60 minutes Store upright and clamp during transport ds: dsc: kts: PU foam (750 ml) kpn: FoamTack kpn_dash: kpn_clear: FoamTack bkpn: TEC7 FoamTack bkpn_clear: TEC7 FoamTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 pu foam | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Pu foam sr_no_br_cl_ns: 670010000 sr_ns: TEC7670010000
r: 03068702 p: 7.47 pid: 156177 b: TEC7 q: 0 st: lt: 6 ean: 5414195008065 sr: TEC7 528014000 sr_no_br: 528014000 sr_no_br_cl: 528014000 sr_cl: TEC7528014000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color Grey ADR packing group ADR class UN number Net volume 310 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Colour (manufacturer) Anthracite n: TEC7 X-Seal paintable sealant anthracite in cartridge (310 ml) - 528014000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL EVERYTHING AND EVERYWHERE Extremely flexible and satin-coloured Adheres to most building materials, even wet ones Safe and mould-resistant Perfectly paintable Can be used indoors and outdoors Safe on all materials Bonds all larger surfaces Contains no harmful solvents, isocyanates or phthalates Up to 5 m² adhesive surface per can High glue strength: 15 kg/cm² Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Remove old sealants completely Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand-electric or air pistol Test adhesion to plastics such as PP, PE, silicones, powder paints, exotic woods and bituminous materials. If necessary, use PT7 as adhesive primer. Reinforce weak and/or porous substrates first with Poxy Primer Can be painted immediately after skin formation. Use paint or varnish according to the movement of the joint. Alkyd resin paints will cure delayed on uncured X-Seal Use Rock for permanent submersion, such as swimming pools ds: dsc: kts: paintable sealant anthracite in cartridge (310 ml) kpn: X-Seal kpn_dash: X kpn_clear: XSeal bkpn: TEC7 X-Seal bkpn_clear: TEC7 XSeal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 528014000 sr_ns: TEC7528014000
r: 03068704 p: 7.47 pid: 154929 b: TEC7 q: 0 st: lt: 4 ean: 5414195008041 sr: TEC7 528015000 sr_no_br: 528015000 sr_no_br_cl: 528015000 sr_cl: TEC7528015000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color Grey EUH-statements EUH208 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge n: TEC7 X-Seal paintable sealant concrete grey in cartridge (310 ml) - 528015000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL EVERYTHING AND EVERYWHERE Extremely flexible and satin-coloured Adheres to most building materials, even wet ones Safe and mould-resistant Perfectly paintable Can be used indoors and outdoors Safe on all materials Bonding of all larger surfaces Contains no harmful solvents, isocyanates or phthalates Up to 5 m² adhesive surface per can High glue strength: 15 kg/cm² Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Remove old sealants completely Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand-electric or air pistol Test adhesion to plastics such as PP, PE, silicones, powder paints, exotic woods and bituminous materials. If necessary, use PT7 as adhesive primer. Reinforce weak and/or porous substrates first with Poxy Primer Can be painted immediately after skin formation. Use paint or varnish according to the movement of the joint. Alkyd resin paints will cure delayed on uncured X-Seal Use Rock for permanent submersion, such as swimming pools ds: dsc: kts: paintable sealant concrete grey in cartridge (310 ml) kpn: X-Seal kpn_dash: X kpn_clear: XSeal bkpn: TEC7 X-Seal bkpn_clear: TEC7 XSeal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 528015000 sr_ns: TEC7528015000
r: 03203850 p: 6.31 pid: 154940 b: TEC7 q: 0 st: lt: 6 ean: 5414195004272 sr: TEC7 528012000 sr_no_br: 528012000 sr_no_br_cl: 528012000 sr_cl: TEC7528012000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml ADR packing group ADR class UN number Colour (manufacturer) Brown EUH-statements EUH208 Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant brown RAL 8028 (310 ml cartridge) - 528012000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant brown RAL 8028 (310 ml cartridge) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528012000 sr_ns: TEC7528012000
r: 03320197 p: 5.64 pid: 178016 b: TEC7 q: 0 st: lt: 4 ean: 5414195022665 sr: TEC7 539505000 sr_no_br: 539505000 sr_no_br_cl: 539505000 sr_cl: TEC7539505000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 100 ml EUH-statements EUH208 Relative density 1,08 ADR packing group ADR class UN number Physical state Solid Packaging Tube Color Colourless n: TEC7 TRANS CLEAR transparent universal sealant and adhesive 100 ml tube - 539505000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description TRANSPARENT UNIVERSAL SEALANT Also adheres to wet substrates Mould- and bacteria-resistant Super strong and permanently elastic after rapid curing Free of solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: transparent universal sealant and adhesive 100 ml tube kpn: TRANS CLEAR kpn_dash: kpn_clear: TRANSCLEAR bkpn: TEC7 TRANS CLEAR bkpn_clear: TEC7 TRANSCLEAR c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 539505000 sr_ns: TEC7539505000
r: 03320150 p: 5.24 pid: 178025 b: TEC7 q: 0 st: lt: 8 ean: 5414195022641 sr: TEC7 535105000 sr_no_br: 535105000 sr_no_br_cl: 535105000 sr_cl: TEC7535105000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Color Black EUH-statements EUH208 Relative density 1,6 ADR packing group ADR class UN number Net volume 100 ml Physical state Solid Packaging Tube Colour (manufacturer) Black n: TEC7 535105000 all purpose slimmer black RAL 9004 in tube (100 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials. On dry and damp substrates. Permanently elastic over the long term. Strong UV-resistant and colourfast for indoor and outdoor use. Safe on mirrors and insulation materials, no marking on natural stone. Free of isocyanates, solvents and phthalates. Water- and airtight. Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed. Apply to clean, stable, dust- and grease-free substrates. Use Tec7 Prepare & Finish for safe cleaning and perfect finishing. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean. Test the adhesion on plastics, powder paints, exotic woods and bituminous materials. Reinforce weak and/or porous substrates first with Poxy Primer. PT7 primer ensures optimum adhesion to difficult (LSE) plastics and powder coatings. Tec7 cures through a reaction with (air) moisture. Use Tec7 in lines, not in thick dots. Dots will cure much more slowly. When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly. Use vertical glue strips to avoid moisture and dust accumulation. Ideal adhesive thickness: 0.5 mm to 3 mm. Thinner layers = higher strength, Thicker layers = higher elasticity. Paintable after skin formation. Do not use with alkyd-based lacquers and paints. Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate is resistant to this. ds: dsc: kts: all purpose slimmer black RAL 9004 in tube (100 ml) kpn: 535105000 kpn_dash: kpn_clear: 535105000 bkpn: TEC7 535105000 bkpn_clear: TEC7 535105000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535105000 sr_ns: TEC7535105000
