Product description
CHEMICAL ANCHOR
- For concrete, solid and hollow stone
- Free of styrene and phthalates
- Also under water
- From -10°C
- Anchor is a 2-component chemical anchor based on styrene-free vinylester resins in a standard pattern, sprayable with a Tec Gun
- The mixing of the two components is achieved by using static mixing tips
- The unique combination of fast curing, wide application margins and physical properties make it a unique chemical anchor in the professional market
- For effective fixing and assembly in all building materials, such as concrete, solid and hollow brick, aerated concrete, etc.
- Anchor withstands high forces and can be used on wet surfaces, even under water,
- at temperatures from -10°C to +40°C. After fast curing, Anchor is stronger than the substrate:
- Without shrinkage, thus reliable and without expansion, thus low stress
- Safe, environmentally friendly and user-friendly
- Can also be used indoors: styrene-free, phthalate-free, low-odour
- Due to its exceptionally high UV and chemical resistance, even against chlorinated and salt water, Anchor can be used in aggressive environments
- Anchor is dimensionally stable and can also be used overhead in holes in the ceiling Very long shelf life, even if the tube is opened and used
Instructions
- Drill a hole with the correct diameter (see diagram)
- Remove dust from the drill hole with a brush, pump or compressed air
- Place Anchor in a Tec Gun, open the cartridge at the top with a knife and attach the mixer tip
- Spray out about 10 cm to mix the two components correctly
- For solid brick: fill the borehole from back to front
- For hollow stone: use a Harpoon plug and fill it with Anchor
- Insert the threaded rod with a twisting motion
- Remove any excess product
- Anchor can be used in temperatures down to -10°C, as long as the cartridge is at room temperature (+15°C)
- The cartridge can be stored after use sealed with the protective screw cap