DeWALT Power Month! Stack up your savings now👉 Grab your FREE tool.
tec7_610148000
tec7_610148000_2
tec7_610148000_3
tec7_610148000_4
tec7_610148000
tec7_610148000_2
tec7_610148000_3
tec7_610148000_4

TEC7 610148000 chemical anchor two-component mortar (280 ml cartridge)

14.40 tax incl.
€11.90 excl. VAT (incl. all environmental contributions)
On stock, immediately available.
each

  • Ordered before 20:00 - delivered tomorrow 16/05/2026
  • Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
  • Delivery by DHL
  • GHS07 Harmful

Product description

CHEMICAL ANCHOR

  • For concrete, solid and hollow stone
  • Free of styrene and phthalates
  • Also under water
  • From -10°C
  • Anchor is a 2-component chemical anchor based on styrene-free vinylester resins in a standard pattern, sprayable with a Tec Gun
  • The mixing of the two components is achieved by using static mixing tips
  • The unique combination of fast curing, wide application margins and physical properties make it a unique chemical anchor in the professional market
  • For effective fixing and assembly in all building materials, such as concrete, solid and hollow brick, aerated concrete, etc.
  • Anchor withstands high forces and can be used on wet surfaces, even under water,
  • at temperatures from -10°C to +40°C. After fast curing, Anchor is stronger than the substrate:
  • Without shrinkage, thus reliable and without expansion, thus low stress
  • Safe, environmentally friendly and user-friendly
  • Can also be used indoors: styrene-free, phthalate-free, low-odour
  • Due to its exceptionally high UV and chemical resistance, even against chlorinated and salt water, Anchor can be used in aggressive environments
  • Anchor is dimensionally stable and can also be used overhead in holes in the ceiling Very long shelf life, even if the tube is opened and used

Instructions

  • Drill a hole with the correct diameter (see diagram)
  • Remove dust from the drill hole with a brush, pump or compressed air
  • Place Anchor in a Tec Gun, open the cartridge at the top with a knife and attach the mixer tip
  • Spray out about 10 cm to mix the two components correctly
  • For solid brick: fill the borehole from back to front
  • For hollow stone: use a Harpoon plug and fill it with Anchor
  • Insert the threaded rod with a twisting motion
  • Remove any excess product
  • Anchor can be used in temperatures down to -10°C, as long as the cartridge is at room temperature (+15°C)
  • The cartridge can be stored after use sealed with the protective screw cap
Key features according to our expert
  • Net volume: 280 ml
  • Principal hazard property: GHS07 Harmful or irritant
  • ADR packing group: Not applicable
  • ADR class: Not applicable
  • UN number: Not applicable
  • Conseils de prudence (P): P101; P102; P271; P280; P304 + P340; P312; P403 + P233; P405; P501; P264; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P272; P321; P362 + P364
  • H-statements: H317; H335; H319
  • Hazard class: GHS07 Harmful or irritant
  • Physical state: Solid
Precautionary statements
  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P271: Use only outdoors or in a well-ventilated area.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
  • P312: Call a POISON CENTER/doctor/… if you feel unwell.
  • P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
  • P405: Store locked up.
  • P501: Dispose of contents/container to ... (see safety data sheet).
  • P264: Wash ... (see safety data sheet) thoroughly after handling.
  • P302 + P352: IF ON SKIN: Wash with plenty of water/…
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P337 + P313: If eye irritation persists: Get medical advice/attention.
  • P272: Contaminated work clothing should not be allowed out of the workplace.
  • P321: Specific treatment (see ... on this label).
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazard statements
  • H317: May cause an allergic skin reaction.
  • H335: May cause respiratory irritation.
  • H319: Causes serious eye irritation.
Specifications / All features
  • Brand: TEC7
  • EAN: 5414195611487
  • Supplier number: TEC7 610148000
Net volume
280 ml
Principal hazard property
GHS07 Harmful or irritant
Adr packing group
Not applicable
Adr class
Not applicable
Un number
Not applicable
Conseils de prudence (p)
P101; P102; P271; P280; P304 + P340; P312; P403 + P233; P405; P501; P264; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P272; P321; P362 + P364
H-statements
H317; H335; H319
Hazard class
GHS07 Harmful or irritant
Physical state
Solid
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.