What applications is the Spit Multi-Max injection mortar suited for?

This styrene-free mortar is suited for anchorages in masonry, non-cracked concrete, and post-installed rebar.

What is included in this set?

The carry case includes 15 Multi-Max 410 ml cartridges and a compatible manual injection gun.

Which threaded rods and rebar sizes are approved?

It is ETA-approved for threaded studs from M8 to M24 and post-installed rebar from 8 mm to 20 mm.

What is the curing temperature range for this mortar?

The injection mortar cures in base material temperatures ranging from -5 °C to 40 °C.

Can a 410 ml cartridge fit into a standard silicone gun?

No, 410 ml cartridges require a dedicated injection gun, which is included in this kit.

SPIT Multi-Max injection mortar 410 ml (15 pcs) + injection gun in box - 695486

Name: SPIT Multi-Max injection mortar 410 ml (15 pcs) + injection gun in box - 695486
Brand: SPIT
SKU: 02619901
Price: 409.95 EUR
Availability: InStock

Supplier number: SPIT 695486 | EAN 3439516954861

Recommended Retail Price €581.82

409.95 tax incl.

€338.80 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 2 products in stock.

set

Ordered before 20:00 - delivered tomorrow 02/10/2026
Free shipping
Delivery by DHL

↓ Documents (2) ✆ Talk to a specialist

Dependable chemical anchoring for heavy fixings

Practical benefits

Ready with complete kit: With fifteen 410 ml cartridges and an injection gun packed in a sturdy case, you have everything needed for heavy-duty anchoring tasks.
Expansion free edge fixing: Because the mortar cures without expansion force, you can safely anchor threaded studs and rebar close to edges and narrow spaces.
Safer working without styrene: The styrene-free formula with low odour emission allows you to install chemical anchors comfortably even in poorly ventilated indoor areas.

In a nutshell

The right choise for

With the Spit Multi-Max injection mortar set, you carry out heavy-duty chemical anchoring with complete confidence. Packed in a practical case with fifteen 410 ml cartridges and a manual injection gun, this set provides everything you need for large-scale jobsite applications. Its styrene-free formula cures without expansion force, allowing you to anchor threaded studs and rebar close to edges in concrete and masonry. Emitting low odour and curing reliably in base temperatures from -5 °C to 40 °C, it is built for demanding indoor and outdoor installations.

Product information FAQ

€409.95

In stock - tax incl.

Key features according to our expert

Net volume: 410 ml
Principal hazard property: GHS02 Flammable
Relative density: 1
ADR class: 5.2
UN number: UN3108
ADR packing group: Not applicable
P-statements: P261; P280; P302 + P352; P333 + P313; P362 + P364; P501; P210; P220; P234; P264; P273; P305 + P351 + P338; P321; P337 + P313; P370 + P378; P391; P403 + P235; P410; P411 + P235; P420
H-statements: H317; H242; H319; H400
Hazard class: GHS07 Harmful or irritant; GHS02 Flammable; GHS09 Environmental hazard
Physical state: Liquid

Product description

Universal styrene-free methacrylate injection mortar for multiple applications.
Versatile mortar for all kinds of applications and materials
Applications
- Chemical anchor for air-conditioning, signs, guide rails, scaffolding construction,
- Reinforcement bars
- Structural anchoring e.g. safety barriers, railings, pipes

Precautionary statements

P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water/…
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364: Take off contaminated clothing and wash it before reuse.
P501: Dispose of contents/container to ... (see safety data sheet).
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P220: Keep away from clothing and other combustible materials.
P234: Keep only in original packaging.
P264: Wash ... (see safety data sheet) thoroughly after handling.
P273: Avoid release to the environment.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321: Specific treatment (see ... on this label).
P337 + P313: If eye irritation persists: Get medical advice/attention.
P370 + P378: In case of fire: Use … (see safety data sheet) to extinguish.
P391: Collect spillage.
P403 + P235: Store in a well-ventilated place. Keep cool.
P410: Protect from sunlight.
P411 + P235: Store at temperatures not exceeding...°C/...°F (see safety data sheet). Keep cool.
P420: Store separately.

Hazard statements

H317: May cause an allergic skin reaction.
H242: Heating may cause a fire.
H319: Causes serious eye irritation.
H400: Very toxic to aquatic life.

Documents

⤓ Safety sheet - Component A PDF ⤓ Safety sheet - Component B PDF

All Features

Net volume: 410 ml
Principal hazard property: GHS02 Flammable
Relative density: 1
Adr class: 5.2
Un number: UN3108
Adr packing group: Not applicable
P-statements: P261; P280; P302 + P352; P333 + P313; P362 + P364; P501; P210; P220; P234; P264; P273; P305 + P351 + P338; P321; P337 + P313; P370 + P378; P391; P403 + P235; P410; P411 + P235; P420
H-statements: H317; H242; H319; H400
Hazard class: GHS07 Harmful or irritant; GHS02 Flammable; GHS09 Environmental hazard
Physical state: Liquid
Max. ø threaded rod: 24 mm
Health and safety: Eye protection, Gloves, Hearing protection, Helmet
Minimal processing temperature chemical product: -40 °C
Maximum operating temperature: 40 °C
Product material: Methacrylate
Min. ø reinforcement rod: 8 mm
Drilling method: Hammer drill
Max. ø reinforcement rod: 20 mm
Maximum processing temperature: 40 °C
Min. ø threaded rod: 8 mm
Minimum processing temperature: -5 °C
Base material: Aerated concrete, Hollow blocks, Hollow bricks, Non-cracked concrete, Solid brick, Stone
Volume: 410 ml

Brand SPIT
02619901
EAN 3439516954861
Supplier number SPIT 695486

Frequently asked questions about this product

Answered by specialists

What applications is the Spit Multi-Max injection mortar suited for?: This styrene-free mortar is suited for anchorages in masonry, non-cracked concrete, and post-installed rebar.
What is included in this set?: The carry case includes 15 Multi-Max 410 ml cartridges and a compatible manual injection gun.
Which threaded rods and rebar sizes are approved?: It is ETA-approved for threaded studs from M8 to M24 and post-installed rebar from 8 mm to 20 mm.
What is the curing temperature range for this mortar?: The injection mortar cures in base material temperatures ranging from -5 °C to 40 °C.
Can a 410 ml cartridge fit into a standard silicone gun?: No, 410 ml cartridges require a dedicated injection gun, which is included in this kit.