What are the dimensions of this SKF ball bearing?

This bearing has a 35 mm bore diameter, a 72 mm outside diameter, and a 17 mm width.

What does the 2RS1 designation mean on this bearing?

The 2RS1 designation indicates rubber contact seals on both sides to keep contaminants out and grease in.

What radial internal clearance does this bearing have?

This bearing features standard normal radial internal clearance (designated as CN).

Does this SKF 6207-2RS1 bearing require lubrication before installation?

No, the bearing is factory pre-lubricated with grease and ready for immediate mounting.

What type of bore does this bearing have?

It features a standard cylindrical bore of 35 mm for direct mounting onto a straight shaft.

SKF 6207-2RS1 single-row groove ball bearing cylindrical 35x72x17 mm

Supplier number: SKF 6207-2RS1 | EAN 7316577067319

Recommended Retail Price €36.01

17.80 tax incl.

€14.71 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Ordered before 20:00 - delivered as of 13/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Smooth rotation with the Skf 6207-2RS1

Practical benefits

Effective double seal protection: Built-in rubber contact seals retain lubrication and block out contaminants, so you benefit from an extended service life.
Low friction at high speeds: The optimized raceway geometry delivers quiet operation with reduced vibration, ensuring you run equipment smoothly and efficiently.
Versatile combined load capacity: You can easily accommodate radial and axial loads in both directions across a wide range of machinery.

In a nutshell

The right choise for

Keep your rotating equipment running smoothly and reliably with the Skf 6207-2RS1 single row deep groove ball bearing. Built-in dual rubber contact seals retain factory lubrication while locking out dust and moisture for an extended service life. The low-friction design ensures quiet operation with reduced vibration, even at high rotational speeds. Featuring dimensions of 35X72X17 mm and a standard cylindrical bore, it mounts easily onto straight shafts in electric motors, pumps, gearboxes, and conveyors. Manufactured from durable steel, this bearing effortlessly handles combined radial and axial loads in both directions to keep your machinery operating at peak performance.

Product information FAQ

€17.80

In stock - tax incl.

Key features according to our expert

Inner diameter: 35 mm
Width: 17 mm
Number of rows: 1
Sealing (bearing): Sealed on both sides
Material (bearing seal): Rubber
Radial clearance: CN (Normal)
Material (bearing): Steel
Material (cage): Brass (sheet)
Bore type: Cylindrical
High temperature: No
Outer diameter: 72 mm

Product description

Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

Integral sealing prolongs bearing service life
Simple, versatile and robust design
Low friction and high-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 35 mm
Width: 17 mm
Number of rows: 1
Sealing (bearing): Sealed on both sides
Material (bearing seal): Rubber
Radial clearance: CN (Normal)
Material (bearing): Steel
Material (cage): Brass (sheet)
Bore type: Cylindrical
High temperature: No
Outer diameter: 72 mm
Matched arrangement: No
Tolerance class: Class P6 (P6)
Radial internal clearance: CN
Basic static load rating: 15.3
Material, bearing: Bearing steel
Relubrication feature: Without
Skf performance class: SKF Explorer
Lubricant: Grease
Sealing type: Contact
Cage: Sheet metal
Locating feature, bearing outer ring: None
Filling slots: Without
Coating: Without
Sealing: Seal on both sides
Limiting speed: 6300
Bore diameter: 35
Basic dynamic load rating: 27
Outer diameter: 72

Brand SKF
01010217
EAN 7316577067319
Supplier number SKF 6207-2RS1

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this SKF ball bearing?: This bearing has a 35 mm bore diameter, a 72 mm outside diameter, and a 17 mm width.
What does the 2RS1 designation mean on this bearing?: The 2RS1 designation indicates rubber contact seals on both sides to keep contaminants out and grease in.
What radial internal clearance does this bearing have?: This bearing features standard normal radial internal clearance (designated as CN).
Does this SKF 6207-2RS1 bearing require lubrication before installation?: No, the bearing is factory pre-lubricated with grease and ready for immediate mounting.
What type of bore does this bearing have?: It features a standard cylindrical bore of 35 mm for direct mounting onto a straight shaft.