r: 01310139 p: 8.53 pid: 7888 b: SKF q: 0 st: lt: 12 ean: 7316570967012 sr: SKF G 8X12X3 sr_no_br: G 8X12X3 sr_no_br_cl: G8X12X3 sr_cl: SKFG8X12X3 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Inner diameter 8 mm Outer diameter 12 mm Width 3 mm n: SKF G 8X12X3 radial shaft seal 8 mm x 12 mm x 3 mm cn: SHAFT SEAL cn2: SHAFT SEAL cn_clear: SHAFTSEAL d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards ds: dsc: kts: radial shaft seal 8 mm x 12 mm x 3 mm kpn: G 8X12X3 kpn_dash: kpn_clear: G8X12X3 bkpn: SKF G 8X12X3 bkpn_clear: SKF G8X12X3 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal sr_no_br_cl_ns: G8X12X3 sr_ns: SKFG8X12X3
r: 02029239 p: 7.34 pid: 2233 b: SKF q: 0 st: lt: 10 ean: 7316571194653 sr: SKF SD 20X28X4 sr_no_br: SD 20X28X4 sr_no_br_cl: SD20X28X4 sr_cl: SKFSD20X28X4 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Inner diameter 20 mm Outer diameter 28 mm Width 4 mm n: SKF SD 20X28X4 radial shaft seal 20 mm x 28 mm x 4 mm cn: SHAFT SEAL cn2: SHAFT SEAL cn_clear: SHAFTSEAL d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards ds: dsc: kts: radial shaft seal 20 mm x 28 mm x 4 mm kpn: SD 20X28X4 kpn_dash: kpn_clear: SD20X28X4 bkpn: SKF SD 20X28X4 bkpn_clear: SKF SD20X28X4 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal sr_no_br_cl_ns: SD20X28X4 sr_ns: SKFSD20X28X4
r: 01310147 p: 3.2 pid: 8597 b: SKF q: 0 st: lt: 47 ean: 7316570467482 sr: SKF G 14X20X3 sr_no_br: G 14X20X3 sr_no_br_cl: G14X20X3 sr_cl: SKFG14X20X3 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Inner diameter 14 mm Outer diameter 20 mm Width 3 mm n: SKF G 14X20X3 radial shaft seal cn: SHAFT SEAL cn2: SHAFT SEAL cn_clear: SHAFTSEAL d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards ds: dsc: kts: radial shaft seal kpn: G 14X20X3 kpn_dash: kpn_clear: G14X20X3 bkpn: SKF G 14X20X3 bkpn_clear: SKF G14X20X3 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal sr_no_br_cl_ns: G14X20X3 sr_ns: SKFG14X20X3
