_

SKF G 9X13X3 radial shaft seal 9 mm x 13 mm x 3 mm

• Inner diameter: 9 mm
• Outer diameter: 13 mm
• Width: 3 mm

Delivery time average 16 days.

10.60

€8.76 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 8.76 ]
query took: 1779049576.6843

layer :



r: 01311022
p: 8.76
pid: 85310
b: SKF
q: 0
st:
lt: 12
ean: 7316571171166
sr: SKF G 9X13X3
sr_no_br: G 9X13X3
sr_no_br_cl: G9X13X3
sr_cl: SKFG9X13X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 9 mm Outer diameter 13 mm Width 3 mm
n: SKF G 9X13X3 radial shaft seal 9 mm x 13 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 9 mm x 13 mm x 3 mm
kpn: G 9X13X3
kpn_dash:
kpn_clear: G9X13X3
bkpn: SKF G 9X13X3
bkpn_clear: SKF G9X13X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G9X13X3
sr_ns: SKFG9X13X3

_

SKF G 28X37X4 radial shaft seal 28 mm x 37 mm x 4 mm

• Inner diameter: 28 mm
• Outer diameter: 37 mm
• Width: 4 mm

On stock, immediately available.

Recommended Retail Price €19.14

9.40

€7.77 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 7.768 ]
query took: 1779049576.6843

layer :



r: 01310056
p: 7.768
pid: 84028
b: SKF
q: 12
st: 1
lt: 1
ean: 7316570642551
sr: SKF G 28X37X4
sr_no_br: G 28X37X4
sr_no_br_cl: G28X37X4
sr_cl: SKFG28X37X4
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 28 mm Outer diameter 37 mm Width 4 mm
n: SKF G 28X37X4 radial shaft seal 28 mm x 37 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 28 mm x 37 mm x 4 mm
kpn: G 28X37X4
kpn_dash:
kpn_clear: G28X37X4
bkpn: SKF G 28X37X4
bkpn_clear: SKF G28X37X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G28X37X4
sr_ns: SKFG28X37X4

_

SKF G 40X52X5 radial shaft seal 40 mm x 52 mm x 5 mm

• Inner diameter: 40 mm
• Outer diameter: 52 mm
• Width: 5 mm

On stock, immediately available.

Recommended Retail Price €18.54

8.95

€7.40 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 7.396 ]
query took: 1779049576.6843

layer :



r: 01310005
p: 7.396
pid: 85718
b: SKF
q: 200
st: 1
lt: 1
ean: 7316570128079
sr: SKF G 40X52X5
sr_no_br: G 40X52X5
sr_no_br_cl: G40X52X5
sr_cl: SKFG40X52X5
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 40 mm Outer diameter 52 mm Width 5 mm
n: SKF G 40X52X5 radial shaft seal 40 mm x 52 mm x 5 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 40 mm x 52 mm x 5 mm
kpn: G 40X52X5
kpn_dash:
kpn_clear: G40X52X5
bkpn: SKF G 40X52X5
bkpn_clear: SKF G40X52X5
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G40X52X5
sr_ns: SKFG40X52X5

_

SKF G 12X19X3 radial shaft seal 12 mm x 19 mm x 3 mm

• Inner diameter: 12 mm
• Outer diameter: 19 mm
• Width: 3 mm

On stock, immediately available.

4.73

€3.91 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 3.91 ]
query took: 1779049576.6843

layer :



r: 01310001
p: 3.91
pid: 84297
b: SKF
q: 25
st: 1
lt: 1
ean: 7316570082234
sr: SKF G 12X19X3
sr_no_br: G 12X19X3
sr_no_br_cl: G12X19X3
sr_cl: SKFG12X19X3
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Inner diameter 12 mm Outer diameter 19 mm Width 3 mm
n: SKF G 12X19X3 radial shaft seal 12 mm x 19 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description Radial shaft seals with low cross-sectional height are intended for bearing arrangements that incorporate needle roller bearings. These contact seals are designed without garter springs. G design seals are made of rubber, with a single lip. Seals for shaft diameters >= 8 mm are reinforced with sheet steel. The rubber outside diameter enhances the seal around the housing bore and reduces the risk of damage to the seal and housing during installation and removal. Low cross-sectional height Retain the lubricant Exclude contaminants
ds:
dsc:
kts: radial shaft seal 12 mm x 19 mm x 3 mm
kpn: G 12X19X3
kpn_dash:
kpn_clear: G12X19X3
bkpn: SKF G 12X19X3
bkpn_clear: SKF G12X19X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G12X19X3
sr_ns: SKFG12X19X3

_

SKF G 50X58X4 radial shaft seal 50 mm x 58 mm x 4 mm

This article is not available

[SEARCH SCORE
Sold desc:
0, 32.2, 16.1 ]
query took: 1779049576.6843

layer :



r: 01310019
p: 16.1
pid: 7163
b: SKF
q: 0
st:
lt: 10
ean: 7316570533132
sr: SKF G 50X58X4
sr_no_br: G 50X58X4
sr_no_br_cl: G50X58X4
sr_cl: SKFG50X58X4
sr_dash:
sold: 32.2
p_range: none
act: 1
avo:
av: Inner diameter 50 mm Outer diameter 58 mm Width 4 mm
n: SKF G 50X58X4 radial shaft seal 50 mm x 58 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 50 mm x 58 mm x 4 mm
kpn: G 50X58X4
kpn_dash:
kpn_clear: G50X58X4
bkpn: SKF G 50X58X4
bkpn_clear: SKF G50X58X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G50X58X4
sr_ns: SKFG50X58X4

_

SKF G 55X63X5 radial shaft seal 55 mm x 63 mm x 5 mm

This article is not available

[SEARCH SCORE
Sold desc:
0, 0, 20.19 ]
query took: 1779049576.6844

layer :



r: 01311020
p: 20.19
pid: 9062
b: SKF
q: 0
st:
lt: 10
ean: 7316570668810
sr: SKF G 55X63X5
sr_no_br: G 55X63X5
sr_no_br_cl: G55X63X5
sr_cl: SKFG55X63X5
sr_dash:
sold: 0
p_range: none
act: 1
avo:
av: Inner diameter 55 mm Outer diameter 63 mm Width 5 mm
n: SKF G 55X63X5 radial shaft seal 55 mm x 63 mm x 5 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 55 mm x 63 mm x 5 mm
kpn: G 55X63X5
kpn_dash:
kpn_clear: G55X63X5
bkpn: SKF G 55X63X5
bkpn_clear: SKF G55X63X5
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G55X63X5
sr_ns: SKFG55X63X5

_

SKF G 17X25X3 radial shaft seal 17 mm x 25 mm x 3 mm

This article is not available

[SEARCH SCORE
Sold desc:
0, 0, 18.02 ]
query took: 1779049576.6844

layer :



r: 01310155
p: 18.02
pid: 8489
b: SKF
q: 0
st:
lt: 12
ean: 7316570049817
sr: SKF G 17X25X3
sr_no_br: G 17X25X3
sr_no_br_cl: G17X25X3
sr_cl: SKFG17X25X3
sr_dash:
sold: 0
p_range: none
act: 1
avo:
av: Inner diameter 17 mm Outer diameter 25 mm Width 3 mm
n: SKF G 17X25X3 radial shaft seal 17 mm x 25 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 17 mm x 25 mm x 3 mm
kpn: G 17X25X3
kpn_dash:
kpn_clear: G17X25X3
bkpn: SKF G 17X25X3
bkpn_clear: SKF G17X25X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G17X25X3
sr_ns: SKFG17X25X3

_

SKF G 35X45X4 radial shaft seal 35 mm x 45 mm x 4 mm

This article is not available

[SEARCH SCORE
Sold desc:
0, 0, 11.97 ]
query took: 1779049576.6844

layer :



r: 01310168
p: 11.97
pid: 9055
b: SKF
q: 0
st:
lt: 10
ean: 7316570836530
sr: SKF G 35X45X4
sr_no_br: G 35X45X4
sr_no_br_cl: G35X45X4
sr_cl: SKFG35X45X4
sr_dash:
sold: 0
p_range: none
act: 1
avo:
av: Inner diameter 35 mm Outer diameter 45 mm Width 4 mm
n: SKF G 35X45X4 radial shaft seal 35 mm x 45 mm x 4 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 35 mm x 45 mm x 4 mm
kpn: G 35X45X4
kpn_dash:
kpn_clear: G35X45X4
bkpn: SKF G 35X45X4
bkpn_clear: SKF G35X45X4
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G35X45X4
sr_ns: SKFG35X45X4

_

SKF G 16X22X3 radial shaft seal 16 mm x 22 mm x 3 mm

This article is not available

[SEARCH SCORE
Sold desc:
0, 0, 9.17 ]
query took: 1779049576.6844

layer :



r: 01310152
p: 9.17
pid: 7893
b: SKF
q: 0
st:
lt: 12
ean: 7316570605587
sr: SKF G 16X22X3
sr_no_br: G 16X22X3
sr_no_br_cl: G16X22X3
sr_cl: SKFG16X22X3
sr_dash:
sold: 0
p_range: none
act: 1
avo:
av: Inner diameter 16 mm Outer diameter 22 mm Width 3 mm
n: SKF G 16X22X3 radial shaft seal 16 mm x 22 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 16 mm x 22 mm x 3 mm
kpn: G 16X22X3
kpn_dash:
kpn_clear: G16X22X3
bkpn: SKF G 16X22X3
bkpn_clear: SKF G16X22X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G16X22X3
sr_ns: SKFG16X22X3

_

SKF G 15X23X3 radial shaft seal 15 mm x 23 mm x 3 mm

This article is not available

[SEARCH SCORE
Sold desc:
0, 0, 8.73 ]
query took: 1779049576.6844

layer :



r: 01310151
p: 8.73
pid: 8486
b: SKF
q: 0
st:
lt: 12
ean: 7316570552874
sr: SKF G 15X23X3
sr_no_br: G 15X23X3
sr_no_br_cl: G15X23X3
sr_cl: SKFG15X23X3
sr_dash:
sold: 0
p_range: none
act: 1
avo:
av: Inner diameter 15 mm Outer diameter 23 mm Width 3 mm
n: SKF G 15X23X3 radial shaft seal 15 mm x 23 mm x 3 mm
cn: SHAFT SEAL
cn2: SHAFT SEAL
cn_clear: SHAFTSEAL
d: Product description: Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings. These ready-to-use elastomer seals usually have a metal reinforcement or housing The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used To prevent pumping of spiral grinding grooves, insert grinding is recommended If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards If the main task is to keep out contaminants, the lip should point outwards
ds:
dsc:
kts: radial shaft seal 15 mm x 23 mm x 3 mm
kpn: G 15X23X3
kpn_dash:
kpn_clear: G15X23X3
bkpn: SKF G 15X23X3
bkpn_clear: SKF G15X23X3
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Sealing rings / Shaft seal | Home / Our brands / Skf / Skf technical and chemical products / Skf adhesives and sealants / Skf seals / Skf sealing rings / Skf shaft seal
sr_no_br_cl_ns: G15X23X3
sr_ns: SKFG15X23X3