- Diameter: 3,5 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 39 mm
Phantom HSS-E and carbide-tipped twist drills DIN 338, 2.5 to 13 mm
Phantom twist drills are made for drilling holes in metal with a drill or a pillar drill, in production, maintenance and assembly.
There are two series. HSS-E twist drills are the basis for everyday drilling in steel and other metals. HM-tip twist drills to DIN 338 have a carbide cutting edge and are meant for heavier drilling, where a standard edge wears too fast. Both series come per size, in diameters from 2.5 to 13 mm, including intermediate sizes such as 3.5, 4.5 and 6.5 mm. Single drills per diameter make it easy to replace a worn or broken size without buying a whole set.
Choose the type by the material and the diameter by what follows the drilling: for a thread, drill the core hole first; for a through bolt, the clearance size. After drilling, cut the thread with the machine taps and hand taps from Phantom. To widen or shape an opening, there are the end mills, roughing cutters and burrs from Phantom.
- Diameter: 6 mm
- Material (drill bit): Carbide tip
- Cutting length: 57 mm
- Diameter: 4,5 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 47 mm
- Diameter: 8 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 75 mm
- Diameter: 3 mm
- Material (drill bit): Carbide tip
- Cutting length: 33 mm
- Diameter: 5 mm
- Material (drill bit): Carbide tip
- Cutting length: 52 mm
- Diameter: 13 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 101 mm
- Diameter: 3,5 mm
- Material (drill bit): Carbide tip
- Cutting length: 39 mm
- Diameter: 4 mm
- Material (drill bit): Carbide tip
- Cutting length: 43 mm
- Diameter: 2,5 mm
- Material (drill bit): Carbide tip
- Cutting length: 30 mm
- Diameter: 6,5 mm
- Material (drill bit): Carbide tip
- Cutting length: 63 mm
- Diameter: 12 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 101 mm
- Diameter: 6 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 57 mm
- Diameter: 6,5 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 63 mm
- Diameter: 10 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 87 mm
- Diameter: 5,5 mm
- Material (drill bit): Carbide tip
- Cutting length: 57 mm
- Diameter: 8,5 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 75 mm
- Min. diameter (drill bit): 9 mm
- Max. diameter (drill bit): 17,2 mm
- Min. diameter (drill bit): 4,3 mm
- Max. diameter (drill bit): 8 mm
- Diameter: 3,2 mm
- Material (drill bit): HSS-E Co 5%
- Cutting length: 36 mm