- Countersink angle: 90 °
- Small diameter: 6,8 mm
- For thread size: M8
Phantom HSS-E head countersink bits for core holes, DIN 373 and DIN 1866
A Phantom head countersink cuts a recess for the screw head around a pre-drilled hole in one pass, so the head sits flush or sunk in the workpiece. These countersinks are made of HSS-E and cover metric screw sizes from M1.2 to M12.
Pick the standard according to the screw head. DIN 1866 at 90° cuts a conical recess for countersunk heads; DIN 373 at 180° mills a flat counterbore for cheese head screws. Then check the fit: fine fit and centre fitting differ in the diameter of the pilot, and with it the clearance of the screw in the hole. The version for core holes has a pilot sized to the core hole, for holes that are threaded afterwards.
The size in the product title reads as pilot diameter × counterbore diameter, for example 6.8×15 mm for M8 with a core hole or 10.5×18 mm for M10 in fine fit. Drill the pilot hole itself with the HSS-E and HM-tip twist drills from Phantom, the drilling range these head countersinks belong to. For a plain chamfer without a pilot, a conical countersink bit is the simpler choice.
- Countersink angle: 180 °
- Small diameter: 6,8 mm
- For thread size: M8
- Countersink angle: 180 °
- Small diameter: 6,4 mm
- For thread size: M6
- Countersink angle: 90 °
- Small diameter: 6,6 mm
- For thread size: M6
- Countersink angle: 180 °
- Small diameter: 8,5 mm
- For thread size: M10
- Countersink angle: 180 °
- Small diameter: 1,7 mm
- For thread size: M1,6
- Countersink angle: 90 °
- Small diameter: 6,4 mm
- For thread size: M6
PHANTOM 433501200 HSS-E countersink drill bit DIN 373 180°' centre fitting' core holes M12 10'2x20mm
- Countersink angle: 180 °
- Small diameter: 10,2 mm
- For thread size: M12
- Countersink angle: 180 °
- Small diameter: 10,5 mm
- For thread size: M10
- Countersink angle: 90 °
- Small diameter: 1,9 mm
- For thread size: M1,8
- Countersink angle: 180 °
- Small diameter: 1,3 mm
- For thread size: M1,2
- Countersink angle: 90 °
- Small diameter: 1,7 mm
- For thread size: M1,6
- Countersink angle: 180 °
- Small diameter: 1,5 mm
- For thread size: M1,4
- Countersink angle: 180 °
- Small diameter: 8,4 mm
- For thread size: M8
- Countersink angle: 180 °
- Small diameter: 9 mm
- For thread size: M8
- Countersink angle: 180 °
- Small diameter: 2,5 mm
- For thread size: M3
- Countersink angle: 180 °
- Small diameter: 3 mm
- For thread size: M2,6
- Countersink angle: 180 °
- Small diameter: 5,3 mm
- For thread size: M5
- Countersink angle: 180 °
- Small diameter: 5,5 mm
- For thread size: M5
- Countersink angle: 90 °
- Small diameter: 4,2 mm
- For thread size: M5