r: 08077702 p: 37.72 pid: 34238 b: PFERD q: 0 st: lt: 8 ean: 4007220936641 sr: PFERD 43208022 sr_no_br: 43208022 sr_no_br_cl: 43208022 sr_cl: PFERD43208022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,25 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 INOX 0,25 brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 - 43208022 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 23 mm shank dia. 6 mm stainless steel wire dia. 0.25 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 kpn: PBG 2323/6 INOX 0,25 kpn_dash: kpn_clear: PBG23236INOX025 bkpn: PFERD PBG 2323/6 INOX 0,25 bkpn_clear: PFERD PBG23236INOX025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208022 sr_ns: PFERD43208022
r: 04023605 p: 37.65 pid: 40438 b: PFERD q: 0 st: lt: 59 ean: 4007220531167 sr: PFERD 43317001 sr_no_br: 43317001 sr_no_br_cl: 43317001 sr_cl: PFERD43317001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection size (machine) M14 Connection type (machine) Inner thread Wire thickness 0,5 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Steel wire n: PFERD POS KBG 12515/M14 ST 0,50 disk brush twisted Ø 125x15 mm M14 steel wire-Ø 0.50 mm for angle grinder - 43317001 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush knotted KBG dia. 125x15 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Long tool life through use of PFERD special wire. ds: dsc: kts: disk brush twisted Ø 125x15 mm M14 steel wire-Ø 0.50 mm for angle grinder kpn: POS KBG 12515/M14 ST 0,50 kpn_dash: kpn_clear: POSKBG12515M14ST050 bkpn: PFERD POS KBG 12515/M14 ST 0,50 bkpn_clear: PFERD POSKBG12515M14ST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43317001 sr_ns: PFERD43317001
r: 02964993 p: 37.65 pid: 69408 b: PFERD q: 0 st: lt: 8 ean: 4007220119631 sr: PFERD 43305028 sr_no_br: 43305028 sr_no_br_cl: 43305028 sr_cl: PFERD43305028 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 65 mm Connection type (machine) X-Lock Twisted Yes Wire thickness 0,5 mm Material (brush filament) Stainless steel n: PFERD 43305028 cup brush knotted TBG Ø 65 mm bore 22.2 mm/X-LOCK stainless steel wire dia. 0.50 mm angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD Cup brush knotted TBG dia. 65 mm hole 22.2 mm/X-LOCK stainless steel wire dia. 0.50 mm angle grinders Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter The Bosch X-LOCK system for angle grinders enables you to change tools quickly and easily Instead of a round centre hole, the X-LOCK system features an X-shaped contour, which allows the tool to be fixed on the angle grinder in a form-fitting manner This means different kinds of tools can be clamped in a reliable manner in a very short space of time The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions ;X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place - and you're ready! It's never been so easy to change accessories on angle grinders X-LOCK is creating a new standard which makes professionals' lives easier and increases their productivity Bosch Power Tools relies on strong partners like PFERD PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. With X-LOCK arbor for quick and easy tool changing. Secure fixing as the tool audibly clicks into place. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: cup brush knotted TBG Ø 65 mm bore 22.2 mm/X-LOCK stainless steel wire dia. 0.50 mm angle grinders kpn: 43305028 kpn_dash: kpn_clear: 43305028 bkpn: PFERD 43305028 bkpn_clear: PFERD 43305028 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43305028 sr_ns: PFERD43305028
r: 03164249 p: 37.62 pid: 69466 b: PFERD q: 0 st: lt: 8 ean: 4007220530610 sr: PFERD 43108006 sr_no_br: 43108006 sr_no_br_cl: 43108006 sr_cl: PFERD43108006 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 20000 rpm Connection size (machine) 6 mm n: PFERD 10012/6 INOX 0,50 round brush twisted RBG Ø 100 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.50 - 43108006 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 100x12 mm shank dia. 6 mm stainless steel wire dia. 0.50 Characteristics Aggressive brush for cleaning, derusting and work on weld seams In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 100 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.50 kpn: 10012/6 INOX 0,50 kpn_dash: kpn_clear: 100126INOX050 bkpn: PFERD 10012/6 INOX 0,50 bkpn_clear: PFERD 100126INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43108006 sr_ns: PFERD43108006
r: 03164273 p: 37.29 pid: 69666 b: PFERD q: 0 st: lt: 8 ean: 4007220107799 sr: PFERD 43302504 sr_no_br: 43302504 sr_no_br_cl: 43302504 sr_cl: PFERD43302504 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 12506/22,2 PIPE CT ST 0,50 COMBITWIST PIPELINE brush twisted RBG Ø 125 x 6 x 22.2 mm steel wire-Ø 0.50mm angle grinder - 43302504 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST PIPELINE brush knotted RBG dia. 125x6x22.2 mm steel wire dia. 0.50 mm angle grinders Characteristics Very aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST PIPELINE brush twisted RBG Ø 125 x 6 x 22.2 mm steel wire-Ø 0.50mm angle grinder kpn: 12506/22,2 PIPE CT ST 0,50 kpn_dash: kpn_clear: 12506222PIPECTST050 bkpn: PFERD 12506/22,2 PIPE CT ST 0,50 bkpn_clear: PFERD 12506222PIPECTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302504 sr_ns: PFERD43302504
r: 03164366 p: 37.22 pid: 70069 b: PFERD q: 0 st: lt: 8 ean: 4007220751305 sr: PFERD 43302107 sr_no_br: 43302107 sr_no_br_cl: 43302107 sr_cl: PFERD43302107 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Inner thread Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 12500 rpm Connection size (machine) M14 n: PFERD 11506/M14 PIPE INOX 0,50 PIPELINE brush twisted RBG Ø 115 x 6 mm M14 stainless steel wire-Ø 0.50 mm angle grinder - 43302107 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 115x6 mm M14 stainless steel wire dia. 0.50 mm angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Very good corrosion resistance. ds: dsc: kts: PIPELINE brush twisted RBG Ø 115 x 6 mm M14 stainless steel wire-Ø 0.50 mm angle grinder kpn: 11506/M14 PIPE INOX 0,50 kpn_dash: kpn_clear: 11506M14PIPEINOX050 bkpn: PFERD 11506/M14 PIPE INOX 0,50 bkpn_clear: PFERD 11506M14PIPEINOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302107 sr_ns: PFERD43302107
r: 03164367 p: 37.22 pid: 69671 b: PFERD q: 0 st: lt: 8 ean: 4007220751275 sr: PFERD 43302106 sr_no_br: 43302106 sr_no_br_cl: 43302106 sr_cl: PFERD43302106 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 11506/22,2 PIPE INOX 0,50 PIPELINE brush twisted RBG Ø 115 x 6 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinder - 43302106 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Very good corrosion resistance. ds: dsc: kts: PIPELINE brush twisted RBG Ø 115 x 6 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinder kpn: 11506/22,2 PIPE INOX 0,50 kpn_dash: kpn_clear: 11506222PIPEINOX050 bkpn: PFERD 11506/22,2 PIPE INOX 0,50 bkpn_clear: PFERD 11506222PIPEINOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302106 sr_ns: PFERD43302106
r: 08077545 p: 37.07 pid: 34056 b: PFERD q: 0 st: lt: 5 ean: 4007220955185 sr: PFERD 43308070 sr_no_br: 43308070 sr_no_br_cl: 43308070 sr_cl: PFERD43308070 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43308070 COMBITWIST bowl brush knotted TBG Ø 100 mm M14 steel wire dia. 0.50 mm angle grinder cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD COMBITWIST cup brush knotted TBG dia. 100mm M14 steel wire dia. 0.50mm angle grinders Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST bowl brush knotted TBG Ø 100 mm M14 steel wire dia. 0.50 mm angle grinder kpn: 43308070 kpn_dash: kpn_clear: 43308070 bkpn: PFERD 43308070 bkpn_clear: PFERD 43308070 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43308070 sr_ns: PFERD43308070
r: 08077942 p: 37.02 pid: 34443 b: PFERD q: 0 st: lt: 8 ean: 4007220955031 sr: PFERD 43304040 sr_no_br: 43304040 sr_no_br_cl: 43304040 sr_cl: PFERD43304040 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) 22,2 mm n: PFERD 17813/22,2 CT ST 0,50 COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm steel wire-Ø 0.50 mm angle grinder - 43304040 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 178x13x22.2 mm steel wire dia. 0.50 mm angle grinders (10) Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm steel wire-Ø 0.50 mm angle grinder kpn: 17813/22,2 CT ST 0,50 kpn_dash: kpn_clear: 17813222CTST050 bkpn: PFERD 17813/22,2 CT ST 0,50 bkpn_clear: PFERD 17813222CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304040 sr_ns: PFERD43304040
r: 08078132 p: 36.88 pid: 35682 b: PFERD q: 0 st: lt: 8 ean: 4007220004456 sr: PFERD 43220070 sr_no_br: 43220070 sr_no_br_cl: 43220070 sr_cl: PFERD43220070 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,55 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Material (brush filament) Silicon carbide n: PFERD KBU 7010/6 SiC 120 0,55 disk brush unturned Ø 70x10 mm pin-Ø 6 mm SiC filament wire-Ø 0.55 mm grit 120 - 43220070 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 70x10 mm shank dia. 6 mm SiC filament dia. 0.55 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 70x10 mm pin-Ø 6 mm SiC filament wire-Ø 0.55 mm grit 120 kpn: KBU 7010/6 SiC 120 0,55 kpn_dash: kpn_clear: KBU70106SiC120055 bkpn: PFERD KBU 7010/6 SiC 120 0,55 bkpn_clear: PFERD KBU70106SiC120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220070 sr_ns: PFERD43220070
r: 03151952 p: 36.88 pid: 69991 b: PFERD q: 0 st: lt: 8 ean: 4007220936658 sr: PFERD 43208027 sr_no_br: 43208027 sr_no_br_cl: 43208027 sr_cl: PFERD43208027 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 INOX 0,35 brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43208027 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 23 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: PBG 2323/6 INOX 0,35 kpn_dash: kpn_clear: PBG23236INOX035 bkpn: PFERD PBG 2323/6 INOX 0,35 bkpn_clear: PFERD PBG23236INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208027 sr_ns: PFERD43208027
r: 08077752 p: 36.87 pid: 35131 b: PFERD q: 0 st: lt: 8 ean: 4007220004586 sr: PFERD 43211204 sr_no_br: 43211204 sr_no_br_cl: 43211204 sr_cl: PFERD43211204 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Height 80 mm Connection size (machine) 6 mm n: PFERD TBU 7015/6 INOX 0,20 cup brush unturned Ø 70 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43211204 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Cup brush crimped TBU dia. 70 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Cup brush with plastic-covered brush body Advantages: Low risk of contaminating the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: cup brush unturned Ø 70 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: TBU 7015/6 INOX 0,20 kpn_dash: kpn_clear: TBU70156INOX020 bkpn: PFERD TBU 7015/6 INOX 0,20 bkpn_clear: PFERD TBU70156INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43211204 sr_ns: PFERD43211204
r: 08077615 p: 36.81 pid: 32734 b: PFERD q: 0 st: lt: 8 ean: 4007220104859 sr: PFERD 44725204 sr_no_br: 44725204 sr_no_br_cl: 44725204 sr_cl: PFERD44725204 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Grit size 40 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 30 mm n: PFERD FR 15030/25,4 CO-COOL 40 flap wheel 150x30 mm, bore Ø 25.4 mm, grain 40 for cool grinding on stainless steel - 44725204 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 150x30 mm centre hole dia. 25.4 mm CO-COOL40 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 150x30 mm, bore Ø 25.4 mm, grain 40 for cool grinding on stainless steel kpn: FR 15030/25,4 CO-COOL 40 kpn_dash: FR 15030/25,4 CO kpn_clear: FR15030254COCOOL40 bkpn: PFERD FR 15030/25,4 CO-COOL 40 bkpn_clear: PFERD FR15030254COCOOL40 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44725204 sr_ns: PFERD44725204
r: 08077616 p: 36.81 pid: 34176 b: PFERD q: 0 st: lt: 8 ean: 4007220104873 sr: PFERD 44725206 sr_no_br: 44725206 sr_no_br_cl: 44725206 sr_cl: PFERD44725206 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Grit size 60 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 30 mm n: PFERD FR 15030/25,4 CO-COOL 60 flap wheel 150x30 mm, bore Ø 25.4 mm, grit 60 for cool grinding on stainless steel - 44725206 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 150x30 mm centre hole dia. 25.4 mm CO-COOL60 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 150x30 mm, bore Ø 25.4 mm, grit 60 for cool grinding on stainless steel kpn: FR 15030/25,4 CO-COOL 60 kpn_dash: FR 15030/25,4 CO kpn_clear: FR15030254COCOOL60 bkpn: PFERD FR 15030/25,4 CO-COOL 60 bkpn_clear: PFERD FR15030254COCOOL60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44725206 sr_ns: PFERD44725206
r: 08077760 p: 36.72 pid: 34540 b: PFERD q: 0 st: lt: 8 ean: 4007220532430 sr: PFERD 43706002 sr_no_br: 43706002 sr_no_br_cl: 43706002 sr_cl: PFERD43706002 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 19 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD POS PBG 1919/6 INOX 0,35 brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 mm - 43706002 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD POS end brush with plastic protection knotted PBG dia. 19 mm shank dia. 6 mm stainless steel wire dia. 0.35 mm (10) Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 mm kpn: POS PBG 1919/6 INOX 0,35 kpn_dash: kpn_clear: POSPBG19196INOX035 bkpn: PFERD POS PBG 1919/6 INOX 0,35 bkpn_clear: PFERD POSPBG19196INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43706002 sr_ns: PFERD43706002
r: 04023549 p: 36.69 pid: 38912 b: PFERD q: 0 st: lt: 4 ean: 4007220153482 sr: PFERD 43306001 sr_no_br: 43306001 sr_no_br_cl: 43306001 sr_cl: PFERD43306001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43306001 cup brush with support ring knotted TBGR Ø 80 mm M14 steel wire dia. 0.50 mm angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD cup brush with bridle knotted TBGR dia. 80mm M14 steel wire dia. 0.50mm angle grinders Characteristics Aggressive brush with bridle Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter on large areas Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: The bridle prevents the wires spreading out sideways. Particularly long tool life. The bridle enables the spreading out and flexibility of the brush filament to be controlled. If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: cup brush with support ring knotted TBGR Ø 80 mm M14 steel wire dia. 0.50 mm angle grinders kpn: 43306001 kpn_dash: kpn_clear: 43306001 bkpn: PFERD 43306001 bkpn_clear: PFERD 43306001 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43306001 sr_ns: PFERD43306001
r: 03182254 p: 36.64 pid: 32974 b: PFERD q: 0 st: lt: 8 ean: 4007220003268 sr: PFERD 44642201 sr_no_br: 44642201 sr_no_br_cl: 44642201 sr_cl: PFERD44642201 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 100 mm Grit size 100 Connection size (machine) M14 Connection type (machine) Inner thread Thread type Metric Width 50 mm n: PFERD PNG 10050 M14 A 100 POLINOX fleece grinding wheel 100x50 mm, grit 100 for fine grinding & finishing - 44642201 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD POLINOX non-woven unmounted grinding wheel PNG dia. 100x50 mm thread M14 A100 for fine grinding and finishing Characteristics POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers The flap structure facilitates improved stock removal and achieves a coarser surface finish The tool is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding wheel 100x50 mm, grit 100 for fine grinding & finishing kpn: PNG 10050 M14 A 100 kpn_dash: kpn_clear: PNG10050M14A100 bkpn: PFERD PNG 10050 M14 A 100 bkpn_clear: PFERD PNG10050M14A100 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44642201 sr_ns: PFERD44642201
r: 08077891 p: 36.64 pid: 34192 b: PFERD q: 0 st: lt: 8 ean: 4007220003299 sr: PFERD 44642221 sr_no_br: 44642221 sr_no_br_cl: 44642221 sr_cl: PFERD44642221 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 100 mm Connection type (machine) Bore Width 50 mm Connection size (machine) 5/8" Grit size 100 n: PFERD PNG 10050 5/8-11 A 100 POLINOX fleece grinding wheel 100x50 mm, grit 100 for fine grinding & finishing - 44642221 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD POLINOX non-woven unmounted grinding wheel PNG dia. 100x50 mm thread 5/8-11 A100 for fine grinding and finishing Characteristics POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers The flap structure facilitates improved stock removal and achieves a coarser surface finish The tool is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding wheel 100x50 mm, grit 100 for fine grinding & finishing kpn: PNG 10050 5/8-11 A 100 kpn_dash: PNG 10050 5/8 kpn_clear: PNG100505811A100 bkpn: PFERD PNG 10050 5/8-11 A 100 bkpn_clear: PFERD PNG100505811A100 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44642221 sr_ns: PFERD44642221
