- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
Paslode cordless nailers on gas and battery for construction and finishing
Paslode cordless nailers work without a hose or compressor, which makes them useful for construction and finishing wherever compressed air is not at hand. Most tools run on gas with a small battery; there is also a fully battery-powered nailer for construction and dismantling.
Choose by nail type first. For timber framing and heavy carpentry, tools take 34° paper bonded strip nails from 50 to 90 mm. Finishing nailers drive straight or 20° nails, in 18Ga and 16Ga versions, for mouldings and skirting boards. Alongside them are anchor nailers for hardened ring nails, tools for 0° plastic-bonded coil and shark nails, and coil nailers for threaded asphalt nails. A 2-in-1 tool combines two applications in one device.
Also check which battery and charger a tool uses, so you can share them within the same series. These nailers are part of Paslode powered tools, which also holds the brand's pneumatic tools and accessories.
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 20 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
PASLODE IM350+ cordless gas-powered nailer for 34° paper bonded strip nails 50-90mm in case - 906501
- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 16 °
- Number of batteries supplied: 1