r: 02260359 p: 1.26 pid: 100682 b: MAPA q: 0 st: lt: 8 ean: 3245424722207 sr: MAPA 34472000 sr_no_br: 34472000 sr_no_br_cl: 34472000 sr_cl: MAPA34472000 sr_dash: sold: 126 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004; EN 421 Length 310 mm Colour (manufacturer) Blue Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Blue EN388 D - Puncture resistance 1 EN388 C - Tear resistance 0 EN388 B - Cut resistance 0 EN388 A - Abrasion resistance 3 Model name Ultranitril 472 Protection Mechanical; Chemicals; Heat resistance; Radiation and radioactive contamination n: MAPA 472 optinit nitrile gloves - 34472007 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Precision for light chemical protection Freedom of movement and excellent sensitivity, thanks to reduced glove thickness Chlorinated finish for better protection of products to be handled Applications: Mechanical industry Assembly of small, oily parts Precision assembly Machining parts with cutting oil Food industry Food preparation Handling food products Construction (carpentry) Working with PVC-based liners Preparing coatings, vanishing Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse thoroughly under running water and wipe with a dry cloth Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous according to directive 1999/45/ec of the european parliament and council. This product does not contain any substances requiring special attention according to directive 1907/2006 of the european Parliament and of the Council (reach). ds: dsc: kts: optinit nitrile gloves kpn: 472 kpn_dash: kpn_clear: 472 bkpn: MAPA 472 bkpn_clear: MAPA 472 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34472000 sr_ns: MAPA34472000
r: 02047602 p: 1.64 pid: 101708 b: MAPA q: 0 st: lt: 8 ean: 3245424854199 sr: MAPA 34485009 sr_no_br: 34485009 sr_no_br_cl: 34485009 sr_cl: MAPA34485009 sr_dash: sold: 118.08 p_range: none act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 320 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 1 EN388 C - Tear resistance 0 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranitril 485 Protection Mechanical; Chemicals n: MAPA 485 ultra nitrile gloves cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Good sensitivity for standard chemical protection Excellent grip resistance thanks to the flexibility of the glove Good grip resistance on slippery objects thanks to the embossed outer finish Applications: Automotive/mechanical industry Machining parts with cutting oil Other sectors Maintenance Wood treatment and finishing Application of phytosanitary products Chemical industry Production and application of paints and varnishes Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (alcohol, thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: ultra nitrile gloves kpn: 485 kpn_dash: kpn_clear: 485 bkpn: MAPA 485 bkpn_clear: MAPA 485 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34485009 sr_ns: MAPA34485009
r: 03367528 p: 14.59 pid: 172759 b: MAPA q: 79 st: 1 lt: 1 ean: 3245427201297 sr: MAPA 34720039 sr_no_br: 34720039 sr_no_br_cl: 34720039 sr_cl: MAPA34720039 sr_dash: sold: 72.95 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 407: 2004 Colour (manufacturer) Orange Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Orange EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance 3 EN388 A - Abrasion resistance 4 Model name Tempdex 720 Protection Mechanical; Heat resistance n: MAPA TEMPDEX 720 thermal protection glove, nitrile, orange - 347200311 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description Agility and cut resistance for optimal thermal protection Nitrile coating and studs for improved insulation and excellent grip Nitrile coating to facilitate working in oily environments. Knitted aramid fibres provide cut protection. Comfort and thermal protection thanks to cotton fabric. Excellent abrasion resistance: increased durability. Applications Rubber industry Vulcanisation, demoulding, calendering Other industries Handldering of moulds in the ceramic industry Lining of hot steels after welding Lining of hot pipes Machine building Work with hot, sharp and oily parts Usage advice It is recommended to test the gloves beforehand, as actual conditions of use may differ from CE-type tests (especially mechanical and/or chemical), depending on temperature, abrasion and degradation. Wear the gloves on dry and clean hands. Let the inside of the gloves dry before reuse. Gloves are compatible with surfactant-based hand wash lotions. In case of burning sensation due to prolonged use, remove hands from heat source and remove gloves immediately. For prolonged contact, the use of two pairs of gloves alternately is recommended. Check gloves for tears or holes before reuse. Not recommended for persons sensitive to dithiocarbamates and thiazoles. Do not use these gloves near machinery with a risk of grasping. ds: dsc: kts: thermal protection glove, nitrile, orange kpn: TEMPDEX 720 kpn_dash: kpn_clear: TEMPDEX720 bkpn: MAPA TEMPDEX 720 bkpn_clear: MAPA TEMPDEX720 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34720039 sr_ns: MAPA34720039
r: 02022049 p: 1.09 pid: 100111 b: MAPA q: 40 st: 1 lt: 1 ean: 3245421771383 sr: MAPA 34177178 sr_no_br: 34177178 sr_no_br_cl: 34177178 sr_cl: MAPA34177178 sr_dash: sold: 65.4 p_range: none act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 374: 2003; EN 421 Length 310 mm Colour (manufacturer) Blue Material Latex Color Blue EN388 D - Puncture resistance 0 EN388 C - Tear resistance 1 EN388 B - Cut resistance 0 EN388 A - Abrasion resistance 0 Model name Vital 177 Protection Mechanical; Chemicals; Radiation and radioactive contamination n: MAPA 177 gloves superfood natural latex cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Dexterity and flexibility adapted for food contact Excellent dexterity: a thin glove made of flexible material Chlorinated finish for better protection of products to be handled Suitable for contact with food products Applications: Food industry Canning Deboning of poultry Filleting of fish Cheese production Food preparation Handling fruit and vegetables Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment. Washing conditions: Before removing the gloves, clean them properly: When used with a solvent (alcohol, etc.) : wipe with a dry cloth When used with cleaning agents, acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves superfood natural latex kpn: 177 kpn_dash: kpn_clear: 177 bkpn: MAPA 177 bkpn_clear: MAPA 177 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34177178 sr_ns: MAPA34177178
r: 02041991 p: 5.4 pid: 100255 b: MAPA q: 0 st: lt: 15 ean: 3245429904189 sr: MAPA 34990458 sr_no_br: 34990458 sr_no_br_cl: 34990458 sr_cl: MAPA34990458 sr_dash: sold: 54 p_range: none act: 1 avo: 1 av: Glove size 8 Material (glove) PVC - Polyvinyl chloride Color Colourless Thickness 0,1 mm Colour (manufacturer) Transparent Length 240 mm Quantity per box 100 n: MAPA SOLO 990 disposable pvc gloves (100 pcs) cn: DISPOSABLE GLOVE cn2: DISPOSABLE GLOVE cn_clear: DISPOSABLEGLOVE d: Product description: Best value for precise movements Applications: Automotive/mechanical industry Assembling small parts Instructions for use: Use the gloves with dry, clean hands. These gloves are intended for single use. Do not touch the outside of the gloves when removing them. fold back the cuff and pull them out while pulling them inside out. Storage conditions: Store the gloves in their original packaging, protected from light and humidity, away from heat sources. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product contains no more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and of the council (reach). ds: dsc: kts: disposable pvc gloves (100 pcs) kpn: SOLO 990 kpn_dash: kpn_clear: SOLO990 bkpn: MAPA SOLO 990 bkpn_clear: MAPA SOLO990 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Disposable glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa disposable glove sr_no_br_cl_ns: 34990458 sr_ns: MAPA34990458
r: 02022111 p: 2.69 pid: 100031 b: MAPA q: 0 st: lt: 8 ean: 3245423971286 sr: MAPA 34397008 sr_no_br: 34397008 sr_no_br_cl: 34397008 sr_cl: MAPA34397008 sr_dash: sold: 45.73 p_range: none act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003 Colour (manufacturer) Yellow Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Yellow EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Titan 397 Protection Mechanical n: MAPA 397 titanlite nitrile gloves cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and dexterity for ordinary use Excellent comfort, thanks to thickness of cotton lining and ventilated back Freedom of movement: dexterity and flexibility, thanks to tight fit Excellent handling: good resistance to abrasion Applications: Automotive/mechanical industry Sandblasting Precision mechanical work Assembly of parts Handling oily mechanical parts Other sectors Assembly of small electrical parts Handling building materials Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Wipe off gloves soiled with oil or grease before removing them. Check gloves for cuts and holes before reusing them. Storage conditions: Store the gloves in their original packaging, protected from light and humidity. Washing conditions: Please note that using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: titanlite nitrile gloves kpn: 397 kpn_dash: kpn_clear: 397 bkpn: MAPA 397 bkpn_clear: MAPA 397 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34397008 sr_ns: MAPA34397008
r: 02878184 p: 4.82 pid: 102646 b: MAPA q: 49 st: 1 lt: 1 ean: 3384123650197 sr: MAPA 3436501 09 sr_no_br: 3436501 09 sr_no_br_cl: 343650109 sr_cl: MAPA343650109 sr_dash: sold: 43.38 p_range: none act: 1 avo: 1 av: Glove size 9 Standard EN 374: 2003 Length 260 mm Colour (manufacturer) Black; Purple Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Black EN388 D - Puncture resistance 2 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranitril 365 Protection Mechanical; Chemicals n: MAPA 365 gloves ultranitrile nitrile black pair cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-long chemical protection Excellent grip when handling very oily parts, prevents risk of dropping objects and reduces muscle fatigue Dexterity and comfort due to the anatomical shape and a seamless liner Long service life Applications: Automotive/mechanical industry Mechanical maintenance Assembly of small, oily parts Chemical industry Common handling tasks Sampling of chemical products Industrial maintenance Handling oily mechanical parts Mechanical maintenance Instructions for use: It is recommended to test the suitability of the gloves for their intended use beforehand, as workplace conditions may differ from those of the CE type approvals (especially mechanical and/or chemical), according to temperature, abrasion and wear. These gloves are not suitable for persons sensitive to dithiocarbamates or thiazoles. Put the gloves on over dry and clean hands Do not leave the gloves in contact with any chemical agent for longer than the measured breakthrough time. Refer to breakthrough times at www.mapa-pro.com or contact Technical Customer Service - MAPA PROFESSIONNEL. For prolonged contact with a solvent, use 2 pairs of gloves alternately. Check the gloves for cuts and holes before using them. Storage conditions: Store the gloves in their original packaging, in a dark, cool and dry place. Washing conditions: Clean the gloves properly before removing them When used with paints, pigments and ink: wipe clean with a cloth and appropriate solvent and wipe off with a dry cloth. When using with a solvent (thinner, etc.) : wipe with a dry cloth. When used with acids or alkaline substances: rinse the gloves thoroughly under running water and wipe with a dry cloth Caution: improper use of the gloves or cleaning or washing them may alter their performance. Note: improper use of the gloves or cleaning them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. ds: dsc: kts: gloves ultranitrile nitrile black pair kpn: 365 kpn_dash: kpn_clear: 365 bkpn: MAPA 365 bkpn_clear: MAPA 365 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 343650109 sr_ns: MAPA343650109
r: 02628078 p: 10.19 pid: 101031 b: MAPA q: 35 st: 1 lt: 1 ean: 3245426004103 sr: MAPA 34600030 sr_no_br: 34600030 sr_no_br_cl: 34600030 sr_cl: MAPA34600030 sr_dash: sold: 10.19 p_range: none act: 1 avo: 1 av: Glove size 10 Material NBR - Nitrile-Butadiene Rubber - Nitrile Protection Mechanical Model name Krytech 600 EN388 A - Abrasion resistance 4 EN388 B - Cut resistance 3 EN388 C - Tear resistance 4 EN388 D - Puncture resistance 3 Color Black Suitable for welding No Length 280 mm n: MAPA 600 gloves krytech nitrile black pair cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Cut protection, grip and skin protection in oily environment. Unbeatable finger sensitivity. Cut protection and oil-resistant. Full coating prevents oil penetration and reduces the risk of skin disorders while ensuring cut protection. The Grip & Proof coating ensures excellent grip in oily conditions. It thus reduces muscle fatigue and increases productivity. Excellent abrasion resistance thanks to the nitrile coating. Unbeatable dexterity Long-lasting and cost-effective: washable up to 5 wash cycles (see washing and drying instructions). No need to replace so often as oil resistance. Applications: Automotive/mechanical industry Pump production Machining parts with cutting oil Handling oily mechanical parts Handling and sorting small, sharp parts Bodywork assembly Other sectors Machine maintenance Glass processing Mechanical industry Maintenance in wet environments (water, oil, grease, hydrocarbons) Precision assembly Cutting and stamping of metal ds: dsc: kts: gloves krytech nitrile black pair kpn: 600 kpn_dash: kpn_clear: 600 bkpn: MAPA 600 bkpn_clear: MAPA 600 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34600030 sr_ns: MAPA34600030
r: 02260346 p: 89.94 pid: 100086 b: MAPA q: 0 st: lt: 8 ean: 3245424681290 sr: MAPA 34468009 sr_no_br: 34468009 sr_no_br_cl: 34468009 sr_cl: MAPA34468009 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 300 mm Colour (manufacturer) Black Material Fluoroelelastomer Color Black EN388 D - Puncture resistance 2 EN388 C - Tear resistance 0 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Fluotech 468 Protection Mechanical; Chemicals n: MAPA 468 fluonit fluoroelastomer gloves - 34468009 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Tactile sensitivity with wear indication Excellent flexibility and optimum thickness, thanks to mapa professionnel multiple-layer technology: good dexterity and comfort. Nitrile inner layer: excellent mechanical resistance and longer service life Green inner layer: abrasion Indication for increased safety Applications: Other sectors Site contamination control Print Petrochemical refinery Mechanical industry Metal degreasing and etching Chemical industry Chemical treatments (solvents) Production of resins and adhesives Production of paints and varnishes Handling and transport of chemical products (solvents) Galvanoplasty Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Check the gloves for defects before using them. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from humidity and heat. Washing conditions: Before removing gloves, clean them properly: When used with paints; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product contains more than 0.1% of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated according to regulation no 1907/2006 of the european parliament and of the council concerning the registration, evaluation, authorisation and restriction of chemicals (reach). ds: dsc: kts: fluonit fluoroelastomer gloves kpn: 468 kpn_dash: kpn_clear: 468 bkpn: MAPA 468 bkpn_clear: MAPA 468 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34468009 sr_ns: MAPA34468009
r: 02022104 p: 31.239 pid: 100029 b: MAPA q: 0 st: lt: 8 ean: 3245423953183 sr: MAPA 34395018 sr_no_br: 34395018 sr_no_br_cl: 34395018 sr_cl: MAPA34395018 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 320 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance 5 EN388 A - Abrasion resistance 4 Model name Krytech 395 Protection Mechanical; Chemicals; Heat resistance n: MAPA 395 kronit-proof nitrile gloves cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Excellent mechanical performance for long-term protection against liquids Versatile glove for protection against cuts, liquids and contact heat up to 250°c Total hand protection against level 5 cuts Fully liquid-proof, resistant to mechanical aggression Proven long-term performance measured after 5 washes Good grip strength to safely handle wet and slippery pieces Applications: Automotive/mechanical industry Sheet metal Crushing, stamping and assembling metal Cutting aluminium tyres Other sectors Collection and sorting of industrial and household waste Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Do not use these gloves next to moving machinery. Use the gloves with dry, clean hands. Check the gloves for cuts and holes before reusing them. Storage conditions: Store the gloves in their original packaging, protected from light and humidity. Washing conditions: Wipe gloves exposed to oil or grease with a dry cloth before removing them. note: using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: kronit-proof nitrile gloves kpn: 395 kpn_dash: kpn_clear: 395 bkpn: MAPA 395 bkpn_clear: MAPA 395 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34395018 sr_ns: MAPA34395018
r: 03345472 p: 26.28 pid: 172758 b: MAPA q: 6 st: 1 lt: 1 ean: 3384120024663 sr: MAPA 34652019 sr_no_br: 34652019 sr_no_br_cl: 34652019 sr_cl: MAPA34652019 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN ISO 374-1 Length 350 mm Colour (manufacturer) Black Material Butyl Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 0 EN388 A - Abrasion resistance 0 Model name Butoflex 652 Protection Mechanical; Chemicals n: MAPA BUTOFLEX 652 chemical protection glove, butyl, black - 34652019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description Unique flexibility and dexterity Highest specific chemical protection, for highly corrosive acids, ketone, esters and amine derivatives. Protection of electronic device against electrostatic discharge (ESD) in accordance with the requirement of EN 16350, standard for protective gloves - Electrostatic properties: <1,0 10E5 Suitable for Mechanical industry Chemical industry Cosmetic and pharmaceutical industry Application Metal processing and degreasing Compounding paints, varnishes, resins and inks Handling and transferring chemical products Sampling of chemical products Handling in laboratories Technical data Inner finish: smooth Exterior finish: smooth Material: butyl Cuff: rolled cuff Colour of gloves: black Length: 35 cm Thickness: 0.78 mm ds: dsc: kts: chemical protection glove, butyl, black kpn: BUTOFLEX 652 kpn_dash: kpn_clear: BUTOFLEX652 bkpn: MAPA BUTOFLEX 652 bkpn_clear: MAPA BUTOFLEX652 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34652019 sr_ns: MAPA34652019
r: 02260076 p: 22.975 pid: 100659 b: MAPA q: 0 st: lt: 8 ean: 3245423393101 sr: MAPA 34339010 sr_no_br: 34339010 sr_no_br_cl: 34339010 sr_cl: MAPA34339010 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 355 mm Colour (manufacturer) Black Material Neoprene Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 339 Protection Mechanical; Chemicals n: MAPA 339 chemzoil neoprene gloves cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort with high chemical protection Chemzoil gloves are designed with an exclusive anatomical shape, offering an excellent fit and exceptional comfort even during prolonged use.The contoured fingers offer unique freedom of movement for this high Risk chemical protection glove. High chemical resistance to acids and alkalis, such as concentrated hydrofluoric acid, oils and greases, thanks to its 100% neoprene multi-layer composition Relief texture, for improved grip on damp, slippery objects High mechanical resistance and long-term use, thanks to textile reinforcement and glove thickness Thermal insulation through the cotton tricot lining for handling hot liquids Applications: Mechanical industry Surface treatment of metals (acids) Chemical industry Controlling site contamination Resin processing Sampling of hot petrochemicals Handling of alkylation units Handling and transporting drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Check the gloves for defects before using them. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: chemzoil neoprene gloves kpn: 339 kpn_dash: kpn_clear: 339 bkpn: MAPA 339 bkpn_clear: MAPA 339 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34339010 sr_ns: MAPA34339010
r: 02262843 p: 18.347 pid: 100094 b: MAPA q: 0 st: lt: 8 ean: 3245424141206 sr: MAPA 34414140 sr_no_br: 34414140 sr_no_br_cl: 34414140 sr_cl: MAPA34414140 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 455 mm Colour (manufacturer) Black Material Neoprene Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 407 Protection Mechanical; Chemicals n: MAPA 414 chem-plyneoprene gloves cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-high chemical protection The two neoprene layers on top of each other increase mechanical and chemical resistance. the red inner layer of the glove ensures that wear and tear is clearly visible, providing optimum safety for the user. Broad chemical resistance (acids, aliphatic solvents, mixed solvents) enhanced by the thickness of the material Good grip resistance thanks to profiled texture Easy to put on And off, thanks to the chlorinated interior Applications: Mechanical industry Surface treatment of metals (acids) Etching/degreasing Chemical industry Controlling site contamination Handling alkylation units Handling and transporting drums of chemicals (solvents) Galvanoplasty Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them in a manner not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: chem-plyneoprene gloves kpn: 414 kpn_dash: kpn_clear: 414 bkpn: MAPA 414 bkpn_clear: MAPA 414 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34414140 sr_ns: MAPA34414140
r: 02260271 p: 13.719 pid: 100136 b: MAPA q: 0 st: lt: 8 ean: 3245424071206 sr: MAPA 34407010 sr_no_br: 34407010 sr_no_br_cl: 34407010 sr_cl: MAPA34407010 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 355 mm Colour (manufacturer) Black Material Neoprene Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 407 Protection Mechanical; Chemicals n: MAPA 407 chem-plyneoprene gloves - 34407019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-high chemical protection The two neoprene layers on top of each other increase mechanical and chemical resistance. the red inner layer of the glove ensures that wear and tear is clearly visible, providing optimum safety for the user. Broad chemical resistance (acids, aliphatic solvents, mixed solvents) enhanced by the thickness of the material Good grip resistance thanks to profiled texture Easy to put on And off, thanks to the chlorinated interior Applications: Mechanical industry Surface treatment of metals (acids) Etching/degreasing Chemical industry Controlling site contamination Handling alkylation units Handling and transporting drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them in a manner not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: chem-plyneoprene gloves kpn: 407 kpn_dash: kpn_clear: 407 bkpn: MAPA 407 bkpn_clear: MAPA 407 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34407010 sr_ns: MAPA34407010
r: 02260151 p: 12.9 pid: 100077 b: MAPA q: 0 st: lt: 8 ean: 3245423773194 sr: MAPA 34377019 sr_no_br: 34377019 sr_no_br_cl: 34377019 sr_cl: MAPA34377019 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 380 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 3 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranil 377 Protection Mechanical; Chemicals; Heat resistance n: MAPA micron nitrile gloves - 34377018 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and improved mechanical resistance for long-term chemical protection Suitable for long-term use, greater comfort due to textile reinforcement, seamless application surface Longer duration of use for heavy work: good mechanical resistance Forearm protection: long glove Applications: Automotive/mechanical industry Surface treatment Machine tool manufacturing Automotive assembly Other sectors Cleaning of printing presses Industrial cleaning Heavy packaging work Chemical industry Mixing of chemical products Fuel unloading Production and application of paints and varnishes Manipulation of valves Tank cleaning Handling and transporting drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: micron nitrile gloves kpn: 377 kpn_dash: kpn_clear: 377 bkpn: MAPA 377 bkpn_clear: MAPA 377 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34377019 sr_ns: MAPA34377019
r: 02260081 p: 11.76 pid: 101923 b: MAPA q: 0 st: lt: 8 ean: 3245423411287 sr: MAPA 34341028 sr_no_br: 34341028 sr_no_br_cl: 34341028 sr_cl: MAPA34341028 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 380 mm Colour (manufacturer) Black Material Neoprene; Latex Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 2 EN388 A - Abrasion resistance 3 Model name Ultraneo 341 Protection Mechanical; Chemicals; Heat resistance n: MAPA 341 neotex neoprene and natural latex gloves cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort with standard chemical protection Suitable for long-term use, greater comfort due to textile reinforcement Longer duration of use for heavy work: good mechanical resistance Forearm protection. Applications: Automotive/mechanical industry Battery, pump and compressor production Chemical industry Chemical treatment of metals Handling and transport of chemical products Other sectors Industrial cleaning, maintenance Wood treatment Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to natural latex, thiuraam, thiazole, thiourea or dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth containing an appropriate solvent and then with a dry cloth When using with a solvent (thinner, etc.): wipe with a dry cloth When used with an acid or alkaline substance: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them in any other way may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: neotex neoprene and natural latex gloves kpn: 341 kpn_dash: kpn_clear: 341 bkpn: MAPA 341 bkpn_clear: MAPA 341 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34341028 sr_ns: MAPA34341028
r: 02260920 p: 10.62 pid: 100358 b: MAPA q: 0 st: lt: 8 ean: 3384129994592 sr: MAPA 34999459 sr_no_br: 34999459 sr_no_br_cl: 34999459 sr_cl: MAPA34999459 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Glove size 9 Material (glove) NBR - Nitrile-Butadiene Rubber - Nitrile Color White Thickness 0,1 mm Colour (manufacturer) White Length 290 mm Quantity per box 100 n: MAPA SOLO 999 disposable ultra nitrile gloves (100 pcs) cn: DISPOSABLE GLOVE cn2: DISPOSABLE GLOVE cn_clear: DISPOSABLEGLOVE d: Product description: Excellent mechanical resistance, ideal in oily environments Applications: Automotive/mechanical industry Assembly of small, oily parts Aerospace industry Working with composite materials (resins) Laboratories Pharmaceutical production Pharmaceutical preparation Research, analysis, handling precision Components Instructions for use: Persons sensitive to dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Slip the cuff over clothing to prevent penetration of any liquid. These gloves are intended for single use. Do not touch the outside of the gloves when removing them. fold the cuff back and pull them out while pulling them inside out. Storage conditions: Store the gloves in their original packaging, protected from direct sunlight and away from heat sources. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product contains no more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and of the council (reach). ds: dsc: kts: disposable ultra nitrile gloves (100 pcs) kpn: SOLO 999 kpn_dash: kpn_clear: SOLO999 bkpn: MAPA SOLO 999 bkpn_clear: MAPA SOLO999 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Disposable glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa disposable glove sr_no_br_cl_ns: 34999459 sr_ns: MAPA34999459
r: 02091423 p: 10.39 pid: 101737 b: MAPA q: 48 st: 1 lt: 1 ean: 3245428324193 sr: MAPA 34832019 sr_no_br: 34832019 sr_no_br_cl: 34832019 sr_cl: MAPA34832019 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003 Colour (manufacturer) Grey Color Grey EN388 D - Puncture resistance 2 EN388 C - Tear resistance 4 EN388 B - Cut resistance 5 EN388 A - Abrasion resistance 4 Model name Krytech 832 Protection Mechanical n: MAPA 832 gloves kromet cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ideal protection for handling heavy, sharp metal parts in oily environments Extra comfort thanks to the anatomical cut of the gloves and the flexibility of the material Good grip for safe handling of pieces in oily environments, thanks to the leather outer layer Long-lasting use, even with rough metal Excellent thermal insulation of the hands Applications: Automotive/mechanical industry Metalworking Handling uncut parts or metal sheets Handling of metal sheets Handling of mail Press parts Cutting belts (plasma etc.) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions at the workplace may differ from "ce" type tests. Use the gloves with dry, clean hands. Check the gloves for cuts and holes before using them. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves or to use them in the vicinity of moving machinery. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Note that improper use of the gloves or cleaning or washing them by a process not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves kromet kpn: 832 kpn_dash: kpn_clear: 832 bkpn: MAPA 832 bkpn_clear: MAPA 832 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34832019 sr_ns: MAPA34832019
