r: 02022111 p: 2.69 pid: 100031 b: MAPA q: 80 st: 1 lt: 1 ean: 3245423971286 sr: MAPA 34397008 sr_no_br: 34397008 sr_no_br_cl: 34397008 sr_cl: MAPA34397008 sr_dash: sold: 45.73 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003 Colour (manufacturer) Yellow Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Yellow EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Titan 397 Protection Mechanical n: MAPA 397 titanlite nitrile gloves - 34397009 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and dexterity for ordinary use Excellent comfort, thanks to thickness of cotton lining and ventilated back Freedom of movement: dexterity and flexibility, thanks to tight fit Excellent handling: good resistance to abrasion Applications: Automotive/mechanical industry Sandblasting Precision mechanical work Assembly of parts Handling oily mechanical parts Other sectors Assembly of small electrical parts Handling building materials Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Wipe off gloves soiled with oil or grease before removing them. Check gloves for cuts and holes before reusing them. Storage conditions: Store the gloves in their original packaging, protected from light and humidity. Washing conditions: Please note that using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: titanlite nitrile gloves kpn: 397 kpn_dash: kpn_clear: 397 bkpn: MAPA 397 bkpn_clear: MAPA 397 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34397008 sr_ns: MAPA34397008
r: 02878184 p: 4.82 pid: 102646 b: MAPA q: 49 st: 1 lt: 1 ean: 3384123650197 sr: MAPA 3436501 09 sr_no_br: 3436501 09 sr_no_br_cl: 343650109 sr_cl: MAPA343650109 sr_dash: sold: 43.38 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 374: 2003 Length 260 mm Colour (manufacturer) Black; Purple Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Black EN388 D - Puncture resistance 2 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranitril 365 Protection Mechanical; Chemicals n: MAPA 365 gloves ultranitrile nitrile black pair - 3436501 10 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-long chemical protection Excellent grip when handling very oily parts, prevents risk of dropping objects and reduces muscle fatigue Dexterity and comfort due to the anatomical shape and a seamless liner Long service life Applications: Automotive/mechanical industry Mechanical maintenance Assembly of small, oily parts Chemical industry Common handling tasks Sampling of chemical products Industrial maintenance Handling oily mechanical parts Mechanical maintenance Instructions for use: It is recommended to test the suitability of the gloves for their intended use beforehand, as workplace conditions may differ from those of the CE type approvals (especially mechanical and/or chemical), according to temperature, abrasion and wear. These gloves are not suitable for persons sensitive to dithiocarbamates or thiazoles. Put the gloves on over dry and clean hands Do not leave the gloves in contact with any chemical agent for longer than the measured breakthrough time. Refer to breakthrough times at www.mapa-pro.com or contact Technical Customer Service - MAPA PROFESSIONNEL. For prolonged contact with a solvent, use 2 pairs of gloves alternately. Check the gloves for cuts and holes before using them. Storage conditions: Store the gloves in their original packaging, in a dark, cool and dry place. Washing conditions: Clean the gloves properly before removing them When used with paints, pigments and ink: wipe clean with a cloth and appropriate solvent and wipe off with a dry cloth. When using with a solvent (thinner, etc.) : wipe with a dry cloth. When used with acids or alkaline substances: rinse the gloves thoroughly under running water and wipe with a dry cloth Caution: improper use of the gloves or cleaning or washing them may alter their performance. Note: improper use of the gloves or cleaning them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. ds: dsc: kts: gloves ultranitrile nitrile black pair kpn: 365 kpn_dash: kpn_clear: 365 bkpn: MAPA 365 bkpn_clear: MAPA 365 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 343650109 sr_ns: MAPA343650109
r: 02628078 p: 10.19 pid: 101031 b: MAPA q: 35 st: 1 lt: 1 ean: 3245426004103 sr: MAPA 34600030 sr_no_br: 34600030 sr_no_br_cl: 34600030 sr_cl: MAPA34600030 sr_dash: sold: 10.19 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Material NBR - Nitrile-Butadiene Rubber - Nitrile Protection Mechanical Model name Krytech 600 EN388 A - Abrasion resistance 4 EN388 B - Cut resistance 3 EN388 C - Tear resistance 4 EN388 D - Puncture resistance 3 Color Black Suitable for welding No Length 280 mm n: MAPA 600 gloves krytech nitrile black pair - 34600030 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Cut protection, grip and skin protection in oily environment. Unbeatable finger sensitivity. Cut protection and oil-resistant. Full coating prevents oil penetration and reduces the risk of skin disorders while ensuring cut protection. The Grip & Proof coating ensures excellent grip in oily conditions. It thus reduces muscle fatigue and increases productivity. Excellent abrasion resistance thanks to the nitrile coating. Unbeatable dexterity Long-lasting and cost-effective: washable up to 5 wash cycles (see washing and drying instructions). No need to replace so often as oil resistance. Applications: Automotive/mechanical industry Pump production Machining parts with cutting oil Handling oily mechanical parts Handling and sorting small, sharp parts Bodywork assembly Other sectors Machine maintenance Glass processing Mechanical industry Maintenance in wet environments (water, oil, grease, hydrocarbons) Precision assembly Cutting and stamping of metal ds: dsc: kts: gloves krytech nitrile black pair kpn: 600 kpn_dash: kpn_clear: 600 bkpn: MAPA 600 bkpn_clear: MAPA 600 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34600030 sr_ns: MAPA34600030
r: 02260346 p: 89.917 pid: 100086 b: MAPA q: 0 st: lt: 8 ean: 3245424681290 sr: MAPA 34468009 sr_no_br: 34468009 sr_no_br_cl: 34468009 sr_cl: MAPA34468009 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 300 mm Colour (manufacturer) Black Material Fluoroelelastomer Color Black EN388 D - Puncture resistance 2 EN388 C - Tear resistance 0 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Fluotech 468 Protection Mechanical; Chemicals n: MAPA 468 fluonit fluoroelastomer gloves - 34468000 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Tactile sensitivity with wear indication Excellent flexibility and optimum thickness, thanks to mapa professionnel multiple-layer technology: good dexterity and comfort. Nitrile inner layer: excellent mechanical resistance and longer service life Green inner layer: abrasion Indication for increased safety Applications: Other sectors Site contamination control Print Petrochemical refinery Mechanical industry Metal degreasing and etching Chemical industry Chemical treatments (solvents) Production of resins and adhesives Production of paints and varnishes Handling and transport of chemical products (solvents) Galvanoplasty Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Check the gloves for defects before using them. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from humidity and heat. Washing conditions: Before removing gloves, clean them properly: When used with paints; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product contains more than 0.1% of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated according to regulation no 1907/2006 of the european parliament and of the council concerning the registration, evaluation, authorisation and restriction of chemicals (reach). ds: dsc: kts: fluonit fluoroelastomer gloves kpn: 468 kpn_dash: kpn_clear: 468 bkpn: MAPA 468 bkpn_clear: MAPA 468 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34468009 sr_ns: MAPA34468009
r: 03345472 p: 32.561 pid: 172758 b: MAPA q: 6 st: 1 lt: 1 ean: 3384120024663 sr: MAPA 34652029 sr_no_br: 34652029 sr_no_br_cl: 34652029 sr_cl: MAPA34652029 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN ISO 374-1 Length 350 mm Colour (manufacturer) Black Material Butyl Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 0 EN388 A - Abrasion resistance 0 Model name Butoflex 652 Protection Mechanical; Chemicals n: MAPA BUTOFLEX 652 chemical protection glove, butyl, black - 34652029 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description Unique flexibility and dexterity Highest specific chemical protection, for highly corrosive acids, ketone, esters and amine derivatives. Protection of electronic device against electrostatic discharge (ESD) in accordance with the requirement of EN 16350, standard for protective gloves - Electrostatic properties: <1,0 10E5 Suitable for Mechanical industry Chemical industry Cosmetic and pharmaceutical industry Application Metal processing and degreasing Compounding paints, varnishes, resins and inks Handling and transferring chemical products Sampling of chemical products Handling in laboratories Technical data Inner finish: smooth Exterior finish: smooth Material: butyl Cuff: rolled cuff Colour of gloves: black Length: 35 cm Thickness: 0.78 mm ds: dsc: kts: chemical protection glove, butyl, black kpn: BUTOFLEX 652 kpn_dash: kpn_clear: BUTOFLEX652 bkpn: MAPA BUTOFLEX 652 bkpn_clear: MAPA BUTOFLEX652 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34652029 sr_ns: MAPA34652029
r: 02022107 p: 31.239 pid: 100029 b: MAPA q: 0 st: lt: 8 ean: 3245423953107 sr: MAPA 34395010 sr_no_br: 34395010 sr_no_br_cl: 34395010 sr_cl: MAPA34395010 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 320 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance 5 EN388 A - Abrasion resistance 4 Model name Krytech 395 Protection Mechanical; Chemicals; Heat resistance n: MAPA 395 kronit-proof nitrile gloves - 34395019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Excellent mechanical performance for long-term protection against liquids Versatile glove for protection against cuts, liquids and contact heat up to 250°c Total hand protection against level 5 cuts Fully liquid-proof, resistant to mechanical aggression Proven long-term performance measured after 5 washes Good grip strength to safely handle wet and slippery pieces Applications: Automotive/mechanical industry Sheet metal Crushing, stamping and assembling metal Cutting aluminium tyres Other sectors Collection and sorting of industrial and household waste Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Do not use these gloves next to moving machinery. Use the gloves with dry, clean hands. Check the gloves for cuts and holes before reusing them. Storage conditions: Store the gloves in their original packaging, protected from light and humidity. Washing conditions: Wipe gloves exposed to oil or grease with a dry cloth before removing them. note: using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: kronit-proof nitrile gloves kpn: 395 kpn_dash: kpn_clear: 395 bkpn: MAPA 395 bkpn_clear: MAPA 395 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34395010 sr_ns: MAPA34395010
r: 02260076 p: 28.429 pid: 100659 b: MAPA q: 0 st: lt: 8 ean: 3245423393101 sr: MAPA 34339010 sr_no_br: 34339010 sr_no_br_cl: 34339010 sr_cl: MAPA34339010 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 355 mm Colour (manufacturer) Black Material Neoprene Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 339 Protection Mechanical; Chemicals n: MAPA 339 chemzoil neoprene gloves - 34339010 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort with high chemical protection Chemzoil gloves are designed with an exclusive anatomical shape, offering an excellent fit and exceptional comfort even during prolonged use.The contoured fingers offer unique freedom of movement for this high Risk chemical protection glove. High chemical resistance to acids and alkalis, such as concentrated hydrofluoric acid, oils and greases, thanks to its 100% neoprene multi-layer composition Relief texture, for improved grip on damp, slippery objects High mechanical resistance and long-term use, thanks to textile reinforcement and glove thickness Thermal insulation through the cotton tricot lining for handling hot liquids Applications: Mechanical industry Surface treatment of metals (acids) Chemical industry Controlling site contamination Resin processing Sampling of hot petrochemicals Handling of alkylation units Handling and transporting drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Check the gloves for defects before using them. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: chemzoil neoprene gloves kpn: 339 kpn_dash: kpn_clear: 339 bkpn: MAPA 339 bkpn_clear: MAPA 339 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34339010 sr_ns: MAPA34339010
r: 02262843 p: 22.644 pid: 100094 b: MAPA q: 0 st: lt: 8 ean: 3245424141206 sr: MAPA 34414140 sr_no_br: 34414140 sr_no_br_cl: 34414140 sr_cl: MAPA34414140 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 455 mm Colour (manufacturer) Black Material Neoprene Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 407 Protection Mechanical; Chemicals n: MAPA 414 chem-plyneoprene gloves - 34414169 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-high chemical protection The two neoprene layers on top of each other increase mechanical and chemical resistance. the red inner layer of the glove ensures that wear and tear is clearly visible, providing optimum safety for the user. Broad chemical resistance (acids, aliphatic solvents, mixed solvents) enhanced by the thickness of the material Good grip resistance thanks to profiled texture Easy to put on And off, thanks to the chlorinated interior Applications: Mechanical industry Surface treatment of metals (acids) Etching/degreasing Chemical industry Controlling site contamination Handling alkylation units Handling and transporting drums of chemicals (solvents) Galvanoplasty Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them in a manner not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: chem-plyneoprene gloves kpn: 414 kpn_dash: kpn_clear: 414 bkpn: MAPA 414 bkpn_clear: MAPA 414 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34414140 sr_ns: MAPA34414140
r: 02260271 p: 17.024 pid: 100136 b: MAPA q: 0 st: lt: 8 ean: 3245424071206 sr: MAPA 34407010 sr_no_br: 34407010 sr_no_br_cl: 34407010 sr_cl: MAPA34407010 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 355 mm Colour (manufacturer) Black Material Neoprene Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 407 Protection Mechanical; Chemicals n: MAPA 407 chem-plyneoprene gloves - 34407019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-high chemical protection The two neoprene layers on top of each other increase mechanical and chemical resistance. the red inner layer of the glove ensures that wear and tear is clearly visible, providing optimum safety for the user. Broad chemical resistance (acids, aliphatic solvents, mixed solvents) enhanced by the thickness of the material Good grip resistance thanks to profiled texture Easy to put on And off, thanks to the chlorinated interior Applications: Mechanical industry Surface treatment of metals (acids) Etching/degreasing Chemical industry Controlling site contamination Handling alkylation units Handling and transporting drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them in a manner not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: chem-plyneoprene gloves kpn: 407 kpn_dash: kpn_clear: 407 bkpn: MAPA 407 bkpn_clear: MAPA 407 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34407010 sr_ns: MAPA34407010
r: 02260151 p: 14.008 pid: 100077 b: MAPA q: 0 st: lt: 8 ean: 3245423773194 sr: MAPA 34377029 sr_no_br: 34377029 sr_no_br_cl: 34377029 sr_cl: MAPA34377029 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 380 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 3 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranil 377 Protection Mechanical; Chemicals; Heat resistance n: MAPA 377 micron nitrile gloves - 34377029 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and improved mechanical resistance for long-term chemical protection Suitable for long-term use, greater comfort due to textile reinforcement, seamless application surface Longer duration of use for heavy work: good mechanical resistance Forearm protection: long glove Applications: Automotive/mechanical industry Surface treatment Machine tool manufacturing Automotive assembly Other sectors Cleaning of printing presses Industrial cleaning Heavy packaging work Chemical industry Mixing of chemical products Fuel unloading Production and application of paints and varnishes Manipulation of valves Tank cleaning Handling and transporting drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: micron nitrile gloves kpn: 377 kpn_dash: kpn_clear: 377 bkpn: MAPA 377 bkpn_clear: MAPA 377 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34377029 sr_ns: MAPA34377029
r: 02260081 p: 12.35 pid: 101923 b: MAPA q: 0 st: lt: 8 ean: 3245423411287 sr: MAPA 34341028 sr_no_br: 34341028 sr_no_br_cl: 34341028 sr_cl: MAPA34341028 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 380 mm Colour (manufacturer) Black Material Neoprene; Latex Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 2 EN388 A - Abrasion resistance 3 Model name Ultraneo 341 Protection Mechanical; Chemicals; Heat resistance n: MAPA 341 neotex neoprene and natural latex gloves - 34341020 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort with standard chemical protection Suitable for long-term use, greater comfort due to textile reinforcement Longer duration of use for heavy work: good mechanical resistance Forearm protection. Applications: Automotive/mechanical industry Battery, pump and compressor production Chemical industry Chemical treatment of metals Handling and transport of chemical products Other sectors Industrial cleaning, maintenance Wood treatment Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to natural latex, thiuraam, thiazole, thiourea or dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth containing an appropriate solvent and then with a dry cloth When using with a solvent (thinner, etc.): wipe with a dry cloth When used with an acid or alkaline substance: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them in any other way may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: neotex neoprene and natural latex gloves kpn: 341 kpn_dash: kpn_clear: 341 bkpn: MAPA 341 bkpn_clear: MAPA 341 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34341028 sr_ns: MAPA34341028
r: 02091423 p: 10.39 pid: 101737 b: MAPA q: 36 st: 1 lt: 1 ean: 3245428324193 sr: MAPA 34832019 sr_no_br: 34832019 sr_no_br_cl: 34832019 sr_cl: MAPA34832019 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003 Colour (manufacturer) Grey Color Grey EN388 D - Puncture resistance 2 EN388 C - Tear resistance 4 EN388 B - Cut resistance 5 EN388 A - Abrasion resistance 4 Model name Krytech 832 Protection Mechanical n: MAPA 832 gloves kromet - 34832019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ideal protection for handling heavy, sharp metal parts in oily environments Extra comfort thanks to the anatomical cut of the gloves and the flexibility of the material Good grip for safe handling of pieces in oily environments, thanks to the leather outer layer Long-lasting use, even with rough metal Excellent thermal insulation of the hands Applications: Automotive/mechanical industry Metalworking Handling uncut parts or metal sheets Handling of metal sheets Handling of mail Press parts Cutting belts (plasma etc.) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions at the workplace may differ from "ce" type tests. Use the gloves with dry, clean hands. Check the gloves for cuts and holes before using them. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves or to use them in the vicinity of moving machinery. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Note that improper use of the gloves or cleaning or washing them by a process not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves kromet kpn: 832 kpn_dash: kpn_clear: 832 bkpn: MAPA 832 bkpn_clear: MAPA 832 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34832019 sr_ns: MAPA34832019
r: 02260156 p: 9.63 pid: 100028 b: MAPA q: 0 st: lt: 8 ean: 3245423824261 sr: MAPA 34382026 sr_no_br: 34382026 sr_no_br_cl: 34382026 sr_cl: MAPA34382026 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 6 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 355 mm Colour (manufacturer) Blue Material Neoprene Color Blue EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 2 Model name Ultraneo 382 Protection Mechanical; Chemicals; Heat resistance n: MAPA 382 stanzoil neoprene gloves - 34382028 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Maximum comfort for standard chemical protection Extremely flexible, thanks to the unique Mapa Professionnel Multi-layer method Embossed texture, for improved grip on damp objects Improved comfort and thermal insulation, thanks to cotton flock lining Applications: Automotive/mechanical industryMounting engine partsSurface treatment Chemical industryMixing of chemical productsHandling of drums of chemical products (solvents) Manipulating valvesOther sectorsLaboratory testsMachine maintenance Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from the "CE" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their packaging, at a temperature above 5°C. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse gloves thoroughly under running water and wipe with a dry cloth Note: using the gloves or cleaning or washing them in any other way may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under Regulation (EC) No 1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in Annex XVII of Regulation No 1907/2006 of the European Parliament and of the Council (REACH). ds: dsc: kts: stanzoil neoprene gloves kpn: 382 kpn_dash: kpn_clear: 382 bkpn: MAPA 382 bkpn_clear: MAPA 382 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34382026 sr_ns: MAPA34382026
r: 02094558 p: 8.5 pid: 101749 b: MAPA q: 0 st: lt: 8 ean: 3245425634196 sr: MAPA 34563479 sr_no_br: 34563479 sr_no_br_cl: 34563479 sr_cl: MAPA34563479 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003 Colour (manufacturer) Black Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Black EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance 3 EN388 A - Abrasion resistance 4 Model name Krytech 563 Protection Mechanical n: MAPA 563 krynit nitrile gloves - 34563478 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Standard protection for complicated operations in an oily environment Excellent resistance to oil and grease Suitable for long-term use Applications: Automotive/mechanical industry Metal pressing, metal sheet handling Mechanical maintenance Paper industry Cardboard and paper handling Environment Waste collection and handling Construction (metal, smith) Handling metal sheets Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Do not use these gloves next to moving machinery. Use the gloves with dry, clean hands. Ensure that the inside of the gloves is dry before putting them back on. Check the gloves for cuts and holes before using them. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Please note that improper use of the gloves or cleaning or washing them through a process not specifically recommended for them may alter their performance. Legislation: This product is not classified as hazardous under Regulation (EC) No 1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: krynit nitrile gloves kpn: 563 kpn_dash: kpn_clear: 563 bkpn: MAPA 563 bkpn_clear: MAPA 563 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34563479 sr_ns: MAPA34563479
r: 02259994 p: 7.63 pid: 101767 b: MAPA q: 0 st: lt: 8 ean: 3245422981200 sr: MAPA 34298170 sr_no_br: 34298170 sr_no_br_cl: 34298170 sr_cl: MAPA34298170 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 420 mm Colour (manufacturer) Blue Material Latex Color Blue EN388 D - Puncture resistance 1 EN388 C - Tear resistance 3 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Alto 298 Protection Mechanical; Chemicals n: MAPA 298 industrial natural latex gloves - 34298170 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Excellent mechanical performance for long-term chemical protection Longer service life and good impact protection, thanks to the thickness of the material Forearm protection. length 42 cm Applications: Other sectors Pharmaceutical industry Maintenance in wet environments Mechanical industry Maintenance in a wet environment (water, oil, grease, hydrocarbons) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. for greater comfort, it is recommended to use a cotton inner glove. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment. Washing conditions: Before removing gloves, clean them properly: When used with a solvent (ketone, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: industrial natural latex gloves kpn: 298 kpn_dash: kpn_clear: 298 bkpn: MAPA 298 bkpn_clear: MAPA 298 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34298170 sr_ns: MAPA34298170
r: 02894042 p: 7.31 pid: 100241 b: MAPA q: 0 st: lt: 8 ean: 3384125580003 sr: MAPA 34558020 sr_no_br: 34558020 sr_no_br_cl: 34558020 sr_cl: MAPA34558020 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; ISO 13997 5.3N (540g) Colour (manufacturer) Grey Material PUR - Polyurethane Color Grey EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance 3 EN388 A - Abrasion resistance 4 Model name Krytech 558 Protection Mechanical n: MAPA 558 gloves krytech polyurethane grey pair - 34558026 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Standard protection for intricate handling in reasonably clean environments Suitable for long-term wear: excellent abrasion resistance Excellent dexterity: anatomical shape Ergonomic to reduce fatique in the hand A reinforced welt in nitrile for an improved durability for the most exposed areas A long cuff for a better protection of the forearm Applications: Automotive/mechanical industry Bodywork assembly Mechanical maintenance Construction Industry (Carpenters/Joiners) Installing steel structures Construction Industry (Metalworkers/Locksmiths) Handling and installing metal structures ds: dsc: kts: gloves krytech polyurethane grey pair kpn: 558 kpn_dash: kpn_clear: 558 bkpn: MAPA 558 bkpn_clear: MAPA 558 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34558020 sr_ns: MAPA34558020
r: 02260056 p: 4.72 pid: 100654 b: MAPA q: 0 st: lt: 8 ean: 3245423191295 sr: MAPA 34319019 sr_no_br: 34319019 sr_no_br_cl: 34319019 sr_cl: MAPA34319019 sr_dash: sold: 0 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 407: 2004 Colour (manufacturer) Orange Material Latex Color Orange EN388 D - Puncture resistance 1 EN388 C - Tear resistance 4 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 2 Model name Harpon 319 Protection Mechanical; Heat resistance n: MAPA 319 gloves harpon natural latex - 34319019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort, improved safety and excellent grip in wet or dry environments Reinforced grip for improved handling Extremely comfortable textile reinforcement (no seams on contact surfaces) Excellent flexibility from natural latex Good thermal insulation Applications: Environment Forestry Barbed wire handling Maintenance of public green spaces Waste collection Other sectors Woodworking Fertiliser spreading Stonemasonry Glass processing Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Storage conditions: Store the gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment. Washing conditions: Please note that improper use of the gloves or cleaning or washing them through a process not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves harpon natural latex kpn: 319 kpn_dash: kpn_clear: 319 bkpn: MAPA 319 bkpn_clear: MAPA 319 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34319019 sr_ns: MAPA34319019
