- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
Cordless gas nailers, battery nailers and a powder-actuated tool
Cordless nailers on gas or battery drive nails without a compressor or air hose, which suits them to construction, interior fitting, installation and insulation work. A powder-actuated tool completes the range for heavy-duty fastenings.
Choose by application and nail first. Construction nailers take strip nails up to 90 mm, finishing nailers work with thin 1.6 mm or 18Ga nails for finishing work. For fastening to concrete there are gas nailers for 3,0 mm nails, and separate versions exist for insulation and installation. Also check the nail angle and collation: 0°, 20° and 34° are not interchangeable, and neither are paper-bonded strips, plastic-bonded strips and coil nails.
Gas nailers also run on a battery, in voltages up to 18V; at Makita it is 7.2V. Check whether a charger and batteries come in the case or whether you need them separately. The nailers come from Spit, Paslode, DeWalt and Makita. This category falls under miscellaneous powered tools such as gas nailers and powder hammers.
- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 2
- Min. length: 15 mm
- Max. Length: 60 mm
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 2
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 20 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- UN number: UN3481
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- UN number: UN3481
MAKITA GF600SE gas nail gun for finishing nails 1,6mm 64mm in case (2x 7,2V 1,0Ah battery + charger)
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 2
- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 34 °
- Number of batteries supplied: 1
- Battery voltage: 7,2 V
- Magazine angle: 0 °
- Number of batteries supplied: 1
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- UN number: UN3481
- Battery voltage: 3,6 V
- Magazine angle: 0 °
- UN number: UN3481