r: 02316773 p: 0.41 pid: 3464 b: FISCHER q: 1200 st: 1 lt: 1 ean: 4006209590522 sr: FISCHER 59052 sr_no_br: 59052 sr_no_br_cl: 59052 sr_cl: FISCHER59052 sr_dash: sold: 5330 p_range: none type: standard act: 1 avo: 1 av: Length 80 mm type (screw head) T25 n: FISCHER 59052 Spacer screw ASL 4.5 x 80 electrolytically zinc-plated steel cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The spacing screw for flexible positioning and alignment of wooden fixtures The fischer spacing screw ASL is a special screw made of zinc-plated steel with two coordinated threads at the same pitch, allowing for precise and time-saving stand-off installation. The special screw is used in through-type installation. When driving in the screw, the external thread cuts into the pre-drilled fixture, and fixes it. If the screw is driven in at an angle of 15 - 30° then higher shear loads can be carried. The fischer spacing screw ASL is ideal for fixing timber window and door frames, cladding, and sub-constructions without plugs in wood and wood materials. Exact mounting even with attachments mounted at an angle Simple stand-off installation with two threads with the same pitch Fixing in solid building materials with fischer expansion plug SX Plus and in hollow building materials with fischer universal plug UX Flexible usage in wooden materials and wooden panels, as well as in solid mineral building materials and hollow mineral building materials The coordinated threads with the same pitch allow for the pin-point positioning and alignment of the fixture, which can even be mounted at an angle to the screw. This allows for an exact and flexible fixing During the installation, the fixture is not pulled onto the substrate, instead it is brought directly to the desired distance and position. This allows for a simple and exact installation When combined with SX Plus 8 and UX 8 plugs, it can be used in almost all wall materials, guaranteeing a secure fixing Suitable for The ASL is suitable for push-through installation Pre-drill the fixture at the desired angle in order to achieve the correct positioning and alignment When screwing in the screw, the external thread cuts into the pre-drilled fixture, and fixes it into the stipulated position The angled position of the screws (15° - 30°) allows high shear loads to be supported Building materials Without plug: suitable for wooden materials and wooden panels With SX Plus or UX pluall concrete and masonry materials Application Window frames Door frames Squared timbers Claddings Substructures made of wood ds: dsc: kts: Spacer screw ASL 4.5 x 80 electrolytically zinc-plated steel kpn: 59052 kpn_dash: kpn_clear: 59052 bkpn: FISCHER 59052 bkpn_clear: FISCHER 59052 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 59052 sr_ns: FISCHER59052
r: 02316753 p: 0.36 pid: 3459 b: FISCHER q: 800 st: 1 lt: 1 ean: 4006209590508 sr: FISCHER 59050 sr_no_br: 59050 sr_no_br_cl: 59050 sr_cl: FISCHER59050 sr_dash: sold: 2916 p_range: none act: 1 avo: 1 av: Length 60 mm type (screw head) T25 n: FISCHER 59050 Spacer screw ASL 4.5 x 60 electrolytically galvanised steel cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The spacing screw for flexible positioning and alignment of wooden fixtures The fischer spacing screw ASL is a special screw made of zinc-plated steel with two coordinated threads at the same pitch, allowing for precise and time-saving stand-off installation. The special screw is used in through-type installation. When driving in the screw, the external thread cuts into the pre-drilled fixture, and fixes it. If the screw is driven in at an angle of 15 - 30° then higher shear loads can be carried. The fischer spacing screw ASL is ideal for fixing timber window and door frames, cladding, and sub-constructions without plugs in wood and wood materials. Exact mounting even with attachments mounted at an angle Simple stand-off installation with two threads with the same pitch Fixing in solid building materials with fischer expansion plug SX Plus and in hollow building materials with fischer universal plug UX Flexible usage in wooden materials and wooden panels, as well as in solid mineral building materials and hollow mineral building materials The coordinated threads with the same pitch allow for the pin-point positioning and alignment of the fixture, which can even be mounted at an angle to the screw. This allows for an exact and flexible fixing During the installation, the fixture is not pulled onto the substrate, instead it is brought directly to the desired distance and position. This allows for a simple and exact installation When combined with SX Plus 8 and UX 8 plugs, it can be used in almost all wall materials, guaranteeing a secure fixing Suitable for The ASL is suitable for push-through installation Pre-drill the fixture at the desired angle in order to achieve the correct positioning and alignment When screwing in the screw, the external thread cuts into the pre-drilled fixture, and fixes it into the stipulated position The angled position of the screws (15° - 30°) allows high shear loads to be supported Building materials Without plug: suitable for wooden materials and wooden panels With SX Plus or UX pluall concrete and masonry materials Application Window frames Door frames Squared timbers Claddings Substructures made of wood ds: dsc: kts: Spacer screw ASL 4.5 x 60 electrolytically galvanised steel kpn: 59050 kpn_dash: kpn_clear: 59050 bkpn: FISCHER 59050 bkpn_clear: FISCHER 59050 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 59050 sr_ns: FISCHER59050
r: 02316656 p: 0.54 pid: 49660 b: FISCHER q: 100 st: 1 lt: 1 ean: 4006209590423 sr: FISCHER 59042 sr_no_br: 59042 sr_no_br_cl: 59042 sr_cl: FISCHER59042 sr_dash: sold: 972 p_range: none act: 1 avo: 1 av: Length 80 mm type (screw head) T25 n: FISCHER 59042 self-drilling set screw JUSS 6 x 80 cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The adjustable screw for fast and infinitely adjustable installation of timber constructions The fischer adjustable screw JUSS is a special screw with two threads for fast and infinitely adjustable installation of timber constructions. The self-tapping screw is driven in through the component and the parallel thread brings the component down towards the ground. This means that the distance between the component and the ground can be infinitely adjusted by the opposite rotation direction. The fischer adjustable screw is ideal for fixing timber substructures made from slats with a thickness of 20 to 25 mm. Infinitely variable adjustment of the attachment. This means that no wedges or blocks are required for installation. This saves time Self-drilling thread. No pre-drilling is therefore required. This saves time and costs The special operating principle of the adjustable screw JUSS allows for infinite adjustment. This saves on the use of wedges and blocks when fixing the fixture The self-drilling thread of the adjustable screw JUSS cuts directly into the wood Suitable for The JUSS is suitable for push-through installation Once the screw has been screwed in, the parallel thread below the screw head causes the fixture to initially pull against the substrate. The fixture distance can then be infinitely adjusted by modifying the rotation direction Building materials Wood and wooden materials or wooden panels Application Substructures made of wooden battens of 20-30 mm thickness ds: dsc: kts: self-drilling set screw JUSS 6 x 80 kpn: 59042 kpn_dash: kpn_clear: 59042 bkpn: FISCHER 59042 bkpn_clear: FISCHER 59042 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 59042 sr_ns: FISCHER59042
r: 02776763 p: 1.21 pid: 22015 b: FISCHER q: 0 st: lt: 4 ean: 4048962251463 sr: FISCHER 536863 sr_no_br: 536863 sr_no_br_cl: 536863 sr_cl: FISCHER536863 sr_dash: sold: 605 p_range: none act: 1 avo: 1 av: Diameter 10 mm Length 120 mm Max. useful length 65 mm n: FISCHER 536863 concrete screw FBS II 10x120 65/55/35 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x120 65/55/35 hexagon head kpn: 536863 kpn_dash: kpn_clear: 536863 bkpn: FISCHER 536863 bkpn_clear: FISCHER 536863 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536863 sr_ns: FISCHER536863
r: 02372098 p: 0.49 pid: 48997 b: FISCHER q: 100 st: 1 lt: 1 ean: 4006209590409 sr: FISCHER 59040 sr_no_br: 59040 sr_no_br_cl: 59040 sr_cl: FISCHER59040 sr_dash: sold: 539 p_range: none act: 1 avo: 1 av: Length 60 mm Thread dimension M6 type (screw head) T25 n: FISCHER 59040 self-drilling set screw JUSS 6 x 60 cn: SET SCREW cn2: SET SCREW cn_clear: SETSCREW d: Product description The adjustable screw for fast and infinitely adjustable installation of timber constructions The fischer adjustable screw JUSS is a special screw with two threads for fast and infinitely adjustable installation of timber constructions. The self-tapping screw is driven in through the component and the parallel thread brings the component down towards the ground. This means that the distance between the component and the ground can be infinitely adjusted by the opposite rotation direction. The fischer adjustable screw is ideal for fixing timber substructures made from slats with a thickness of 20 to 25 mm. Infinitely variable adjustment of the attachment. This means that no wedges or blocks are required for installation. This saves time Self-drilling thread. No pre-drilling is therefore required. This saves time and costs The special operating principle of the adjustable screw JUSS allows for infinite adjustment. This saves on the use of wedges and blocks when fixing the fixture The self-drilling thread of the adjustable screw JUSS cuts directly into the wood Suitable for The JUSS is suitable for push-through installation Once the screw has been screwed in, the parallel thread below the screw head causes the fixture to initially pull against the substrate. The fixture distance can then be infinitely adjusted by modifying the rotation direction Building materials Wood and wooden materials or wooden panels Application Substructures made of wooden battens of 20-30 mm thickness ds: dsc: kts: self-drilling set screw JUSS 6 x 60 kpn: 59040 kpn_dash: kpn_clear: 59040 bkpn: FISCHER 59040 bkpn_clear: FISCHER 59040 c_path: Home / Fasteners and machine components / Fasteners / Screws / Set screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer set screw sr_no_br_cl_ns: 59040 sr_ns: FISCHER59040
r: 02776782 p: 2.6 pid: 20438 b: FISCHER q: 0 st: lt: 5 ean: 4048962251555 sr: FISCHER 536872 sr_no_br: 536872 sr_no_br_cl: 536872 sr_cl: FISCHER536872 sr_dash: sold: 260 p_range: none act: 1 avo: 1 av: Diameter 12 mm Max. useful length 70 mm Length 130 mm n: FISCHER 536872 concrete screw FBS II 12x130 70/55/30 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x130 70/55/30 hexagon head kpn: 536872 kpn_dash: kpn_clear: 536872 bkpn: FISCHER 536872 bkpn_clear: FISCHER 536872 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536872 sr_ns: FISCHER536872
r: 02316727 p: 0.61 pid: 50001 b: FISCHER q: 0 st: lt: 8 ean: 4006209590461 sr: FISCHER 59046 sr_no_br: 59046 sr_no_br_cl: 59046 sr_cl: FISCHER59046 sr_dash: sold: 183 p_range: none act: 1 avo: 1 av: Length 120 mm Thread dimension M6 type (screw head) T25 n: FISCHER 59046 self-drilling set screw JUSS 6 x 120 cn: SET SCREW cn2: SET SCREW cn_clear: SETSCREW d: Product description The adjustable screw for fast and infinitely adjustable installation of timber constructions The fischer adjustable screw JUSS is a special screw with two threads for fast and infinitely adjustable installation of timber constructions. The self-tapping screw is driven in through the component and the parallel thread brings the component down towards the ground. This means that the distance between the component and the ground can be infinitely adjusted by the opposite rotation direction. The fischer adjustable screw is ideal for fixing timber substructures made from slats with a thickness of 20 to 25 mm. Infinitely variable adjustment of the attachment. This means that no wedges or blocks are required for installation. This saves time Self-drilling thread. No pre-drilling is therefore required. This saves time and costs The special operating principle of the adjustable screw JUSS allows for infinite adjustment. This saves on the use of wedges and blocks when fixing the fixture The self-drilling thread of the adjustable screw JUSS cuts directly into the wood Suitable for The JUSS is suitable for push-through installation Once the screw has been screwed in, the parallel thread below the screw head causes the fixture to initially pull against the substrate. The fixture distance can then be infinitely adjusted by modifying the rotation direction Building materials Wood and wooden materials or wooden panels Application Substructures made of wooden battens of 20-30 mm thickness ds: dsc: kts: self-drilling set screw JUSS 6 x 120 kpn: 59046 kpn_dash: kpn_clear: 59046 bkpn: FISCHER 59046 bkpn_clear: FISCHER 59046 c_path: Home / Fasteners and machine components / Fasteners / Screws / Set screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer set screw sr_no_br_cl_ns: 59046 sr_ns: FISCHER59046
r: 02316660 p: 0.57 pid: 49994 b: FISCHER q: 0 st: lt: 8 ean: 4006209590447 sr: FISCHER 59044 sr_no_br: 59044 sr_no_br_cl: 59044 sr_cl: FISCHER59044 sr_dash: sold: 171 p_range: none act: 1 avo: 1 av: Length 100 mm type (screw head) T25 n: FISCHER 59044 self-drilling set screw JUSS 6 x 100 cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The adjustable screw for fast and infinitely adjustable installation of timber constructions The fischer adjustable screw JUSS is a special screw with two threads for fast and infinitely adjustable installation of timber constructions. The self-tapping screw is driven in through the component and the parallel thread brings the component down towards the ground. This means that the distance between the component and the ground can be infinitely adjusted by the opposite rotation direction. The fischer adjustable screw is ideal for fixing timber substructures made from slats with a thickness of 20 to 25 mm. Infinitely variable adjustment of the attachment. This means that no wedges or blocks are required for installation. This saves time Self-drilling thread. No pre-drilling is therefore required. This saves time and costs The special operating principle of the adjustable screw JUSS allows for infinite adjustment. This saves on the use of wedges and blocks when fixing the fixture The self-drilling thread of the adjustable screw JUSS cuts directly into the wood Suitable for The JUSS is suitable for push-through installation Once the screw has been screwed in, the parallel thread below the screw head causes the fixture to initially pull against the substrate. The fixture distance can then be infinitely adjusted by modifying the rotation direction Building materials Wood and wooden materials or wooden panels Application Substructures made of wooden battens of 20-30 mm thickness ds: dsc: kts: self-drilling set screw JUSS 6 x 100 kpn: 59044 kpn_dash: kpn_clear: 59044 bkpn: FISCHER 59044 bkpn_clear: FISCHER 59044 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 59044 sr_ns: FISCHER59044
r: 02776762 p: 1.12 pid: 22011 b: FISCHER q: 400 st: 1 lt: 1 ean: 4048962251456 sr: FISCHER 536862 sr_no_br: 536862 sr_no_br_cl: 536862 sr_cl: FISCHER536862 sr_dash: sold: 168 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 45 mm Length 100 mm n: FISCHER 536862 concrete screw FBS II 10x100 45/35/15 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x100 45/35/15 hexagon head kpn: 536862 kpn_dash: kpn_clear: 536862 bkpn: FISCHER 536862 bkpn_clear: FISCHER 536862 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536862 sr_ns: FISCHER536862
r: 02316541 p: 3.15 pid: 89165 b: FISCHER q: 0 st: lt: 8 ean: 4006209809273 sr: FISCHER 80927 sr_no_br: 80927 sr_no_br_cl: 80927 sr_cl: FISCHER80927 sr_dash: sold: 157.5 p_range: none act: 1 avo: 1 av: Diameter 12 mm Length 160 mm Eye diameter 23 mm Open/Closed Closed Material Steel Surface treatment Zinc plated n: FISCHER 80927 scaffolding eye GS 12 x 160 cn: EYE SCREW cn2: EYE SCREW cn_clear: EYESCREW d: Product description The standard scaffold anchoring. The fischer eye bolt GS made of zinc-plated steel is, together with the fischer expansion plug S 14 ROE, suitable for fixing into concrete and solid brick. The use of the frame fixing S 16 H R is recommended for masonry made of hollow building materials and aerated concrete. The screw-in markings provide a visual control during assembly and prevent the eye from being unintentionally broken off. The fischer eye bolt is ideally suited for fixing façade scaffolds, cables, or chains. The eye does not open due to the high-quality weld Optimum interaction between eyebolt and fischer expansion plug The ideal interaction of the scaffold eye screw and plug allows for a high load-bearing capacity, thus providing increased safety The high-quality weld stops the eye from opening The large diameter of the cover caps (available separately) covers drill holes completely and discreetly, even those with slightly broken edges Suitable for In order to achieve the maximum load-bearing capacity, nylon plugs should only be used once In perforated brick and aerated concrete, we recommend combination with the plug S 16 H R The screw-in markings provide a visual control during assembly, and thus allow for a simple and problem-free installation Pre-drill into wood when not using plugs. The drill bit diameter should correspond to the core diameter of the screw Suitable cover caps AD 12x40 for closing off residual drill holes for S 14 ROE Not suitable for swings, hammocks etc Building materials GS 12 + S 14 ROE suitable for: Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Solid brick made from lightweight concrete GS 12 + S 16 H R suitable for: Vertically perforated brick Perforated sand-lime brick Aerated concrete Application Façade scaffolds Ropes Chains Trellises Lighting Clothes lines Hanging baskets ds: dsc: kts: scaffolding eye GS 12 x 160 kpn: 80927 kpn_dash: kpn_clear: 80927 bkpn: FISCHER 80927 bkpn_clear: FISCHER 80927 c_path: Home / Fasteners and machine components / Fasteners / Screws / Eye screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer eye screw sr_no_br_cl_ns: 80927 sr_ns: FISCHER80927
r: 02776795 p: 2.77 pid: 21325 b: FISCHER q: 0 st: lt: 8 ean: 4048962251586 sr: FISCHER 536875 sr_no_br: 536875 sr_no_br_cl: 536875 sr_cl: FISCHER536875 sr_dash: sold: 110.8 p_range: none act: 1 avo: 1 av: Diameter 14 mm Max. useful length 30 mm Length 95 mm n: FISCHER 536875 concrete screw FBS II 14x95 30/10/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x95 30/10/- hexagon head kpn: 536875 kpn_dash: kpn_clear: 536875 bkpn: FISCHER 536875 bkpn_clear: FISCHER 536875 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536875 sr_ns: FISCHER536875
r: 02776809 p: 1.3 pid: 22108 b: FISCHER q: 0 st: lt: 10 ean: 4048962251708 sr: FISCHER 536887 sr_no_br: 536887 sr_no_br_cl: 536887 sr_cl: FISCHER536887 sr_dash: sold: 65 p_range: none act: 1 avo: 1 av: Diameter 10 mm Max. useful length 45 mm Length 100 mm n: FISCHER 536887 concrete screw FBS II 10x100 45/35/15 countersunk head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x100 45/35/15 countersunk head kpn: 536887 kpn_dash: kpn_clear: 536887 bkpn: FISCHER 536887 bkpn_clear: FISCHER 536887 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536887 sr_ns: FISCHER536887
r: 02776752 p: 1.21 pid: 20429 b: FISCHER q: 0 st: lt: 8 ean: 4048962251401 sr: FISCHER 536857 sr_no_br: 536857 sr_no_br_cl: 536857 sr_cl: FISCHER536857 sr_dash: sold: 60.5 p_range: none act: 1 avo: 1 av: Diameter 8 mm Length 130 mm Max. useful length 80 mm n: FISCHER 536857 concrete screw FBS II 8x130 80/65 hexagon head with TX shank cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x130 80/65 hexagon head with TX shank kpn: 536857 kpn_dash: kpn_clear: 536857 bkpn: FISCHER 536857 bkpn_clear: FISCHER 536857 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536857 sr_ns: FISCHER536857
r: 02776797 p: 2.86 pid: 21328 b: FISCHER q: 0 st: lt: 4 ean: 4048962251593 sr: FISCHER 536876 sr_no_br: 536876 sr_no_br_cl: 536876 sr_cl: FISCHER536876 sr_dash: sold: 57.2 p_range: none act: 1 avo: 1 av: Diameter 14 mm Max. useful length 35 mm Length 100 mm n: FISCHER 536876 concrete screw FBS II 14x100 35/15/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x100 35/15/- hexagon head kpn: 536876 kpn_dash: kpn_clear: 536876 bkpn: FISCHER 536876 bkpn_clear: FISCHER 536876 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536876 sr_ns: FISCHER536876
r: 02776760 p: 1.08 pid: 42421 b: FISCHER q: 0 st: lt: 10 ean: 4048962251449 sr: FISCHER 536861 sr_no_br: 536861 sr_no_br_cl: 536861 sr_cl: FISCHER536861 sr_dash: sold: 54 p_range: none act: 1 avo: 1 av: Diameter 10 mm Length 90 mm Max. useful length 35 mm n: FISCHER 536861 concrete screw FBS II 10x90 35/25/5 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x90 35/25/5 hexagon head kpn: 536861 kpn_dash: kpn_clear: 536861 bkpn: FISCHER 536861 bkpn_clear: FISCHER 536861 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536861 sr_ns: FISCHER536861
r: 08134140 p: 0.26 pid: 176356 b: FISCHER q: 0 st: lt: 8 ean: 4048962219975 sr: FISCHER 532910 sr_no_br: 532910 sr_no_br_cl: 532910 sr_cl: FISCHER532910 sr_dash: sold: 52 p_range: none act: 1 avo: 1 av: Diameter 7,5 mm Overall length 92 mm Head shape (bolt) Cylindrical type (screw head) T30 Material Steel Surface treatment Zinc plated n: FISCHER 532910 frame screw FFSZ 7.5 x 92 TX30 with cylinder head cn: FRAME FIXING SCREW cn2: FRAME FIXING SCREW cn_clear: FRAMEFIXINGSCREW d: Product description The special screw for fitting wooden window frames Cost-effective screw mounting without a plug. For all types of solid building material and aerated concrete. Fast serial assembly due to the small diameter of 6 mm of the drilled hole. Tension-free fastening with a long service life of the window frame. Continuous thread prevents pulling on the frame. Force-saving mounting: The special thread reduces the screw-in forces. Screw mounting without the use of dowels, for efficient processing. The small bore diameter of 6 mm allows efficient serial assembly. The continuous thread enables tension- and strain-free fastening of the frame to the substrate. The high/low thread of the screw tip as well as the additional milling ribs reduce the screw-in torque and thus ensure force-saving mounting. With two head shapes suitable for all common frame materials. According to ift Rosenheim, particularly suitable for fixing plastic window frames in brick masonry. The fischer frame screw FFSZ with cylinder head is a special screw for the efficient installation of window frames. After drilling, the screw can be screwed directly into solid or porous building material. The continuous special thread prevents the frame from being pulled against the substrate. This secures it tension-free and for a long service life. Applications Window frames made of wood, plastic and aluminium Door frames Rachelwerk Building materials Concrete Perforated brick Lightweight concrete hollow core brick Perforated sand-lime brick Solid sand-lime brick Solid lightweight concrete brick Solid brick Aerated concrete ds: dsc: kts: frame screw FFSZ 7.5 x 92 TX30 with cylinder head kpn: 532910 kpn_dash: kpn_clear: 532910 bkpn: FISCHER 532910 bkpn_clear: FISCHER 532910 c_path: Home / Fasteners and machine components / Fasteners / Screws / Frame fixing screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer frame fixing screw sr_no_br_cl_ns: 532910 sr_ns: FISCHER532910
r: 02776758 p: 1.03 pid: 20703 b: FISCHER q: 0 st: lt: 5 ean: 4048962251432 sr: FISCHER 536860 sr_no_br: 536860 sr_no_br_cl: 536860 sr_cl: FISCHER536860 sr_dash: sold: 51.5 p_range: none act: 1 avo: 1 av: Diameter 10 mm Max. useful length 25 mm Length 80 mm n: FISCHER 536860 concrete screw FBS II 10x80 25/15/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x80 25/15/- hexagon head kpn: 536860 kpn_dash: kpn_clear: 536860 bkpn: FISCHER 536860 bkpn_clear: FISCHER 536860 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536860 sr_ns: FISCHER536860
r: 02776738 p: 0.77 pid: 22003 b: FISCHER q: 0 st: lt: 8 ean: 4048962251357 sr: FISCHER 536852 sr_no_br: 536852 sr_no_br_cl: 536852 sr_cl: FISCHER536852 sr_dash: sold: 38.5 p_range: none act: 1 avo: 1 av: Diameter 8 mm Length 70 mm Max. useful length 20 mm n: FISCHER 536852 concrete screw FBS II 8x70 20/5 hexagon head with TX shank cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x70 20/5 hexagon head with TX shank kpn: 536852 kpn_dash: kpn_clear: 536852 bkpn: FISCHER 536852 bkpn_clear: FISCHER 536852 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536852 sr_ns: FISCHER536852
r: 08134143 p: 0.33 pid: 176378 b: FISCHER q: 0 st: lt: 8 ean: 4048962428339 sr: FISCHER 558879 sr_no_br: 558879 sr_no_br_cl: 558879 sr_cl: FISCHER558879 sr_dash: sold: 33 p_range: none act: 1 avo: 1 av: Length 80 mm type (screw head) T25 Drive type Torx Material Steel Surface treatment Zinc plated Quantity per box 100 n: FISCHER 558879 set screw FAFS 5 x 80 TX25 cn: STAND-OFF SCREW cn2: STAND-OFF SCREW cn_clear: STANDOFFSCREW d: Product description The spacer screw with stepless adjustability The special operating principle allows infinitely variable adjustment. The attachment can be aligned very precisely. The clip does not rotate during adjustment. The screw head retains its position in the attachment, flush mounting is guaranteed. The PowerFast II engages very quickly in wood, improving processing speed. In addition, the FPF II is also suitable for use in dowels. The thread on the clip allows unscrewing the attachment, which facilitates dismantling. Fischer FAFS set screws are problem solvers for the stepless setting of timber structures or window frames. The special long crown bit turns the screw through the attachment until it is flush with the surface. After removing the crown, the attachment can be adjusted by turning the screw further in or out. The set screw is ideal for fastening and adjusting window frames and railing work on wooden substrates, in masonry or concrete the FAFS can be used in combination with a DuoPower 6x50.A special bit is required for fitting and adjusting the FAFS, which can be ordered separately under article number 558883. Applications Wooden substructures Door frames Window frames Rachelwerk Building materials Wood and wood-based materials ds: dsc: kts: set screw FAFS 5 x 80 TX25 kpn: 558879 kpn_dash: kpn_clear: 558879 bkpn: FISCHER 558879 bkpn_clear: FISCHER 558879 c_path: Home / Fasteners and machine components / Fasteners / Screws / Stand-off screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer stand-off screw sr_no_br_cl_ns: 558879 sr_ns: FISCHER558879
r: 08134141 p: 0.33 pid: 176350 b: FISCHER q: 0 st: lt: 8 ean: 4048962219999 sr: FISCHER 532912 sr_no_br: 532912 sr_no_br_cl: 532912 sr_cl: FISCHER532912 sr_dash: sold: 33 p_range: none act: 1 avo: 1 av: Diameter 7,5 mm Overall length 112 mm Head shape (bolt) Cylindrical type (screw head) T30 Material Steel Surface treatment Zinc plated n: FISCHER 532912 frame screw FFSZ 7.5 x 112 TX30 with cylinder head cn: FRAME FIXING SCREW cn2: FRAME FIXING SCREW cn_clear: FRAMEFIXINGSCREW d: Product description The special screw for fitting wooden window frames Cost-effective screw mounting without a plug. For all types of solid building material and aerated concrete. Fast serial assembly due to the small diameter of 6 mm of the drilled hole. Tension-free fastening with a long service life of the window frame. Continuous thread prevents pulling on the frame. Force-saving mounting: The special thread reduces the screw-in forces. Screw mounting without the use of dowels, for efficient processing. The small bore diameter of 6 mm allows efficient serial assembly. The continuous thread enables tension- and strain-free fastening of the frame to the substrate. The high/low thread of the screw tip as well as the additional milling ribs reduce the screw-in torque and thus ensure force-saving mounting. With two head shapes suitable for all common frame materials. According to ift Rosenheim, particularly suitable for fixing plastic window frames in brick masonry. The fischer frame screw FFSZ with cylinder head is a special screw for the efficient installation of window frames. After drilling, the screw can be screwed directly into solid or porous building material. The continuous special thread prevents the frame from being pulled against the substrate. This secures it tension-free and for a long service life. Applications Window frames made of wood, plastic and aluminium Door frames Rachelwerk Building materials Concrete Perforated brick Lightweight concrete hollow core brick Perforated sand-lime brick Solid sand-lime brick Solid lightweight concrete brick Solid brick Aerated concrete ds: dsc: kts: frame screw FFSZ 7.5 x 112 TX30 with cylinder head kpn: 532912 kpn_dash: kpn_clear: 532912 bkpn: FISCHER 532912 bkpn_clear: FISCHER 532912 c_path: Home / Fasteners and machine components / Fasteners / Screws / Frame fixing screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer frame fixing screw sr_no_br_cl_ns: 532912 sr_ns: FISCHER532912
