What drill bit diameter is required for this concrete screw?

This concrete screw requires a drill hole diameter of 14 mm.

Does the drill hole need to be cleaned before installation?

For vertical drilling in ceilings or floors, cleaning is not required if floor holes are drilled 3x the diameter deeper.

What tool should you use to drive this screw?

Fischer recommends using a tangential impact wrench with an SW21 socket or a compatible bit.

What is the maximum fixture thickness for this screw?

The maximum usable fixture thickness is 30 mm at the minimum embedment depth of 65 mm.

Can this concrete screw be adjusted after tightening?

Yes, approval permits unscrewing the fastener twice to align the fixture before tightening it again.

FISCHER 536875 concrete screw FBS II 14x95 30/10/- hexagon head

Name: FISCHER 536875 concrete screw FBS II 14x95 30/10/- hexagon head
Brand: FISCHER
SKU: 02776795
Price: 3.59 EUR
Availability: PreOrder

Supplier number: FISCHER 536875 | EAN 4048962251586

3.59 tax incl.

€2.97 excl. VAT (incl. all environmental contributions)

On order: delivered from 23/10/2026

The minimum purchase order quantity for the product is 20.

Ordered before 20:00 - delivered as of 23/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL

✆ Talk to a specialist

Heavy duty Fischer concrete anchoring

Practical benefits

Fast cutting tooth geometry: The specialized saw tooth design cuts effortlessly into concrete, allowing you to secure heavy structural elements quickly.
Zero drill hole cleaning: You save valuable installation time because vertical floor and ceiling fixings require no bore hole cleaning.
Multiple embedment depth options: Different embedment depths allow you to adapt the screw easily for various fixture thicknesses up to 30 mm.

In a nutshell

The right choise for

With the Fischer fbs II 14X95 30/10/- us concrete screw, you create heavy-duty, dependable anchorages in solid concrete without the mess of chemical resins or separate plugs. The specialized saw tooth geometry cuts smoothly into concrete, allowing you to secure base plates, steel structures, and railings quickly. You save significant installation time during vertical drilling in floors and ceilings, as drill hole cleaning is not required. Offering versatile embedment depths for fixture thicknesses up to 30 mm, this hex-head screw adapts easily to your project needs. Furthermore, it can be loosened twice for precise component alignment, ensuring complete control and reliable structural fastening.

Product information FAQ

€3.59

tax incl.

Key features according to our expert

Diameter: 14 mm
Max. useful length: 30 mm
Length: 95 mm

Product description

The high-performance concrete screw for absolute installation ease.

The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.

With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses
The special saw tooth geometry enables fast cutting into the concrete
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again
With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses
The special saw tooth geometry enables fast cutting into the concrete
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper
Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again
The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval
The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates
The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups

Suitable for

The UltraCut FBS II is recommended for the push-through installation
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper
We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive
The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control)

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Reinforcement of existing concrete structures
Bricks of clay (EN771-1)
Solid sand-lime brick (EN771-2)
Perforated sand-lime brick (EN771-2)

Also suitable for:

Concrete C12/15
Solid building materials
Masonry with a dense structure

Application

Guard rails
Consoles/Base plates
Metal profiles
Shelving systems
Protection barriers
Results / beam anchors
Temporary anchoring, e. g. of building site equipment
Shuttering props
Reinforcement of bridges
Rehabilitation of old and ailing buildings
Rehabilitation of car parks

All Features

Diameter: 14 mm
Max. useful length: 30 mm
Length: 95 mm
Screw-in depth/clamping range: 85 / 10 mm
Seismic approval: C1 / C2
Screw size: 16.0 x 95 mm
Cup-ø: 28 mm
Min. drill hole depth for through-hole mounting: 110 mm
Drill diameter: 14 mm
Material: electrolytically galvanised steel
Screw length: 95 mm
Recording: SW 21
Screw diameter: 14 mm

Brand FISCHER
02776795
EAN 4048962251586
Supplier number FISCHER 536875

Frequently asked questions about this product

Answered by specialists

What drill bit diameter is required for this concrete screw?: This concrete screw requires a drill hole diameter of 14 mm.
Does the drill hole need to be cleaned before installation?: For vertical drilling in ceilings or floors, cleaning is not required if floor holes are drilled 3x the diameter deeper.
What tool should you use to drive this screw?: Fischer recommends using a tangential impact wrench with an SW21 socket or a compatible bit.
What is the maximum fixture thickness for this screw?: The maximum usable fixture thickness is 30 mm at the minimum embedment depth of 65 mm.
Can this concrete screw be adjusted after tightening?: Yes, approval permits unscrewing the fastener twice to align the fixture before tightening it again.