- Thread size: M4
- Pitch: 0,7 mm
- Cutting direction: Right
Single Wera machine tap bits and HSS combination drill bits
Wera machine tap bits and HSS combination drill bits with tap cut threads in a machine, for fitters, metalworkers and installers who tap holes without switching to a separate tap set.
The 844 machine tap bit cuts the thread in a hole that has already been pre-drilled. Sizes run from 3 to 10 mm, with lengths from 33 to 40 mm. Choose the size by the thread you need and drill the correct core hole first.
The 847 HSS combination drill bit with tap does both steps in one operation: the drilling section makes the core hole and the tapping section cuts the thread straight after. That saves a tool change and keeps hole and thread in line. Sizes are given by the drill diameter, such as 2.5, 3.3, 4.2, 5, 6.8 and 8.5 mm, with lengths from 36 to 59 mm. When tapping, work at a low speed, use cutting oil where needed and back the tool out of the hole steadily. These bits are part of Wera cutting tools, alongside the brand's other machining tools.
- Shank size: 1/4 inch
- Shank type: Hexagonal
- Overall length: 39.0 mm
- Thread size: M6
- Pitch: 1 mm
- Cutting direction: Right
- Shank size: 1/4 inch
- Shank type: Hexagonal
- Overall length: 51 mm
- Shank size: 1/4 inch
- Shank type: Hexagonal
- Overall length: 44.0 mm
- Thread size: M8
- Pitch: 1,25 mm
- Cutting direction: Right
- Shank size: 1/4 inch
- Shank type: Hexagonal
- Overall length: 41 mm
- Thread size: M5
- Pitch: 0,8 mm
- Cutting direction: Right
- Thread size: M3
- Pitch: 0,5 mm
- Cutting direction: Right
- Shank size: 1/4 inch
- Shank type: Hexagonal
- Overall length: 59.0 mm
- Shank size: 1/4 inch
- Shank type: Hexagonal
- Overall length: 36.0 mm
- Thread size: M10
- Pitch: 1,5 mm
- Cutting direction: Right