r: 02828649 p: 10.578 pid: 42665 b: WERA q: 0 st: lt: 15 ean: 4013288155672 sr: WERA 05134658001 sr_no_br: 05134658001 sr_no_br_cl: 05134658001 sr_cl: WERA05134658001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 27 Blade thickness Type of drive profile (bit) Torx Plus Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip IPR27 n: WERA 867/4 IPR TORX PLUS bit with bore, 27 IPR x 89 mm - 05134658001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws with safety pin. A 5-flank TORX PLUS® profile with bore hole. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX PLUS® IPR screws with safety pin TORX PLUS® IPR bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® IPR socket screws with safety pin Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits A 5-flank TORX PLUS® profile with a borehole. This drive geometry has only five flanks instead of the usual six and a borehole to protect safety screws against unauthorised unfastening. The screws cannot be turned with conventional, widely available tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IPR TORX PLUS® bits with bore hole, 27 IPR x 89 mm kts: bit with bore, 27 IPR x 89 mm kpn: 867/4 IPR TORX PLUS kpn_dash: kpn_clear: 8674IPRTORXPLUS bkpn: WERA 867/4 IPR TORX PLUS bkpn_clear: WERA 8674IPRTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134658001 sr_ns: WERA05134658001
r: 02831683 p: 10.578 pid: 42452 b: WERA q: 0 st: lt: 12 ean: 4013288040169 sr: WERA 05028037001 sr_no_br: 05028037001 sr_no_br_cl: 05028037001 sr_cl: WERA05028037001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size IP25 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Plus n: WERA 367 IP TORX PLUS screwdriver, 25 IP x 100 mm - 05028037001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver by Wera. TORX PLUS® profile: in comparison to "normal" TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and screw is implemented by using an elliptical and not circular profile design. This means that the power applied when fastening is spread across a larger surface area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Multi-component Kraftform handle for rapid and convenient working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. The hexagonal non-roll feature prevents any annoying rolling away at the workplace. Handle markings for simplified finding and sorting of the tools. For TORX PLUS® socket screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX PLUS® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX PLUS® Screwdriver for TORX PLUS® screws, 25 IP x 100 mm kts: screwdriver, 25 IP x 100 mm kpn: 367 IP TORX PLUS kpn_dash: kpn_clear: 367IPTORXPLUS bkpn: WERA 367 IP TORX PLUS bkpn_clear: WERA 367IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028037001 sr_ns: WERA05028037001
r: 08085411 p: 10.578 pid: 69927 b: WERA q: 0 st: lt: 8 ean: 4013288222916 sr: WERA 05136407001 sr_no_br: 05136407001 sr_no_br_cl: 05136407001 sr_cl: WERA05136407001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt 900 Product Range Wera Kraftform Kompakt n: WERA 9467 fabric box for Kraftform Kompakt 900, empty, 185 x 70 x 105 mm - 05136407001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Robust textile box for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for tool sets Kraftform Kompakt 900 Set 1 and Kraftform Kompakt 900 Imperial Set 1; empty. Robust, rigid material Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage Low weight for easy transport Compatible with Wera 2go Robust textile box for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for tool sets Kraftform Kompakt 900 Set 1 and Kraftform Kompakt 900 Imperial Set 1; empty. Features and benefits The material used is distinguished by its high level of robustness. At the same time, the textile box is light and rigid. Even if the textile box falls down, the tools are well protected. The robust loops made of broad rubber band hold the tool safe and tight. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9467 Textile box Kraftform Kompakt 900, empty, 185 x 70 x 105 mm kts: fabric box for Kraftform Kompakt 900, empty, 185 x 70 x 105 mm kpn: 9467 kpn_dash: kpn_clear: 9467 bkpn: WERA 9467 bkpn_clear: WERA 9467 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136407001 sr_ns: WERA05136407001
r: 03229452 p: 10.578 pid: 31017 b: WERA q: 0 st: lt: 12 ean: 4013288213792 sr: WERA 05136301001 sr_no_br: 05136301001 sr_no_br_cl: 05136301001 sr_cl: WERA05136301001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 3 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 3 mm n: WERA 840/4 Z SB bit, 3 x 152 mm - 05136301001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 3 x 152 mm kts: bit, 3 x 152 mm kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136301001 sr_ns: WERA05136301001
r: 02061829 p: 10.578 pid: 42148 b: WERA q: 0 st: lt: 15 ean: 4013288025913 sr: WERA 05138265001 sr_no_br: 05138265001 sr_no_br_cl: 05138265001 sr_cl: WERA05138265001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size TT30 Blade length 115 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant n: WERA 367 TORX BO screwdriver with bore, TX 30 x 115 mm - 05138265001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving For TORX® socket screws with safety pin Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX® BO Screwdriver for tamper-proof TORX® screws, TX 30 x 115 mm kts: screwdriver with bore, TX 30 x 115 mm kpn: 367 TORX BO kpn_dash: kpn_clear: 367TORXBO bkpn: WERA 367 TORX BO bkpn_clear: WERA 367TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05138265001 sr_ns: WERA05138265001
r: 02828154 p: 10.578 pid: 44687 b: WERA q: 0 st: lt: 12 ean: 4013288094612 sr: WERA 05066786001 sr_no_br: 05066786001 sr_no_br_cl: 05066786001 sr_cl: WERA05066786001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Tri-Wing Connection size (bit) 1/4" VDE approved No Bit tip Tri-Wing 2 n: WERA 875/4 TRI-WING bit, 2 x 89 mm - 05066786001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TRI-WING® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TRI-WING® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TRI-WING® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits The TRI-WING® screwdriving system is mainly found in aviation and household technology (here e.g. on live components). The asymmetric arrangement of the three profile flanks prevents the use of anything other than the original tools. The high-precision Wera profile design ensures a secure fit of the tool in the head of the screw. The blades are manufactured out of bit material. The Wera know-how with regard to the hardening technology ensures a long service life of the tool. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 875/4 TRI-WING® bits, 2 x 89 mm kts: bit, 2 x 89 mm kpn: 875/4 TRI-WING kpn_dash: 875/4 TRI kpn_clear: 8754TRIWING bkpn: WERA 875/4 TRI-WING bkpn_clear: WERA 8754TRIWING c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066786001 sr_ns: WERA05066786001
r: 03229456 p: 10.578 pid: 31590 b: WERA q: 0 st: lt: 10 ean: 4013288213815 sr: WERA 05136303001 sr_no_br: 05136303001 sr_no_br_cl: 05136303001 sr_cl: WERA05136303001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 5 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 5 mm n: WERA 840/4 Z SB bit, 5 x 152 mm - 05136303001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 5 x 152 mm kts: bit, 5 x 152 mm kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136303001 sr_ns: WERA05136303001
r: 02828163 p: 10.578 pid: 46990 b: WERA q: 0 st: lt: 12 ean: 4013288094636 sr: WERA 05066788001 sr_no_br: 05066788001 sr_no_br_cl: 05066788001 sr_cl: WERA05066788001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 4 Blade thickness Type of drive profile (bit) Tri-Wing Connection size (bit) 1/4" VDE approved No Bit tip Tri-Wing 4 n: WERA 875/4 TRI-WING bit, 4 x 89 mm - 05066788001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TRI-WING® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TRI-WING® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TRI-WING® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits The TRI-WING® screwdriving system is mainly found in aviation and household technology (here e.g. on live components). The asymmetric arrangement of the three profile flanks prevents the use of anything other than the original tools. The high-precision Wera profile design ensures a secure fit of the tool in the head of the screw. The blades are manufactured out of bit material. The Wera know-how with regard to the hardening technology ensures a long service life of the tool. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 875/4 TRI-WING® bits, 4 x 89 mm kts: bit, 4 x 89 mm kpn: 875/4 TRI-WING kpn_dash: 875/4 TRI kpn_clear: 8754TRIWING bkpn: WERA 875/4 TRI-WING bkpn_clear: WERA 8754TRIWING c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066788001 sr_ns: WERA05066788001
r: 02831667 p: 10.578 pid: 42842 b: WERA q: 0 st: lt: 6 ean: 4013288138392 sr: WERA 05028072001 sr_no_br: 05028072001 sr_no_br_cl: 05028072001 sr_cl: WERA05028072001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T27 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 27 x 300 mm - 05028072001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 27 x 300 mm kts: screwdriver with holding function, TX 27 x 300 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028072001 sr_ns: WERA05028072001
r: 02823121 p: 10.578 pid: 45569 b: WERA q: 0 st: lt: 12 ean: 4013288015457 sr: WERA 05065129001 sr_no_br: 05065129001 sr_no_br_cl: 05065129001 sr_cl: WERA05065129001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 44,5 mm Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) M5 Connection profile (bit) Outer thread VDE approved No Bit tip PZ2 Drive profile size (bit) 2 n: WERA 855/12 PZ bit Pozidriv, PZ 2 x 44.5 mm - 05065129001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for Pozidriv screws for universal use, with thread drive M 5. Suitable for Pozidriv screws Tough for hard materials Thread drive M 5 (Wera connecting series 12) Application Suitable for Pozidriv screws Drive Thread drive M 5 Design Tough, for universal use Features and benefits Thread drive M 5 (Wera connecting series 12). Drive: For direct machine drive. Suitable for: Böllhoff/Uniquick, Holz-Her, Weber. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/12 Bits M 5, PZ 2 x 44.5 mm kts: bit Pozidriv, PZ 2 x 44.5 mm kpn: 855/12 PZ kpn_dash: kpn_clear: 85512PZ bkpn: WERA 855/12 PZ bkpn_clear: WERA 85512PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05065129001 sr_ns: WERA05065129001
r: 02816974 p: 10.56 pid: 44280 b: WERA q: 0 st: lt: 12 ean: 4013288106575 sr: WERA 05160983001 sr_no_br: 05160983001 sr_no_br_cl: 05160983001 sr_cl: WERA05160983001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 4 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH4 n: WERA 851/4 A PH bit Phillips, PH 4 x 50 mm - 05160983001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality Wera bit for Phillips screws. It has a sharp-edged profile that ensures a dependable transfer of power between the bit and screw by breaking off the paint e.g. when screw profiles are covered in it. Extra-hard design: 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Profiled version Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Extra-hard, profiled version Features and benefits A stands for aviation. A bits are particularly hard bits with a sharp-edged profile which e.g. penetrates screw profiles full of paint (such as on fuselage panels) ensuring a dependable transfer of force between the bit and the screw. ds: dsc: Scope of delivery 851/4 A bits, PH 4 x 50 x 10 mm kts: bit Phillips, PH 4 x 50 mm kpn: 851/4 A PH kpn_dash: kpn_clear: 8514APH bkpn: WERA 851/4 A PH bkpn_clear: WERA 8514APH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05160983001 sr_ns: WERA05160983001
r: 08108038 p: 10.53 pid: 159625 b: WERA q: 0 st: lt: 8 ean: 4013288228673 sr: WERA 05006525001 sr_no_br: 05006525001 sr_no_br_cl: 05006525001 sr_cl: WERA05006525001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip PZ2 Drive profile size (bit) 2 Product Range Wera Kraftform Kompakt n: WERA 05006525001 Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade suitable for Pozidriv screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Take it easy tool finder: colour coding by profile and laser-engraved size indication Application Suitable for Pozidriv screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 65 i Take it easy, PZ 2 x 157 mm kts: Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006525001 kpn_dash: kpn_clear: 05006525001 bkpn: WERA 05006525001 bkpn_clear: WERA 05006525001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006525001 sr_ns: WERA05006525001
r: 08108063 p: 10.45 pid: 159632 b: WERA q: 0 st: lt: 8 ean: 4013288228857 sr: WERA 05006542001 sr_no_br: 05006542001 sr_no_br_cl: 05006542001 sr_cl: WERA05006542001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip T25 Drive profile size (bit) 25 Product Range Wera Kraftform Kompakt n: WERA 05006542001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application TORX® screws Blade Reduced blade diameter with integrated protective insulation, low lying TORX® screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 67 iS TORX® Take it easy, TX 25 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006542001 kpn_dash: kpn_clear: 05006542001 bkpn: WERA 05006542001 bkpn_clear: WERA 05006542001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006542001 sr_ns: WERA05006542001
r: 08108058 p: 10.44 pid: 159628 b: WERA q: 0 st: lt: 8 ean: 4013288228826 sr: WERA 05006539001 sr_no_br: 05006539001 sr_no_br_cl: 05006539001 sr_cl: WERA05006539001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip T30 Drive profile size (bit) 30 Product Range Wera Kraftform Kompakt n: WERA 05006539001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Take it easy tool finder: colour coding by profile and laser-engraved size indication Application TORX® screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 67 i TORX® Take it easy, TX 30 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006539001 kpn_dash: kpn_clear: 05006539001 bkpn: WERA 05006539001 bkpn_clear: WERA 05006539001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006539001 sr_ns: WERA05006539001
r: 03057726 p: 10.28 pid: 31801 b: WERA q: 0 st: lt: 12 ean: 4013288212320 sr: WERA 05008864001 sr_no_br: 05008864001 sr_no_br_cl: 05008864001 sr_cl: WERA05008864001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #2 Blade length 25 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Square n: WERA 368 Stubby screwdriver for internal square screws, square 2 x 25 mm - 05008864001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Particularly small screwdriver with short blade for hard-to-reach areas. The 2-component Kraftform handle with its handy combination of hard and soft zones allows for a firm grip and precise working. The blades have all the advantages of the Wera bit technology. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away With colour coding and size stamping Application Square head socket screws Blade Hexagonal, turned Handle Kraftform with anti-roll protection, 2 components, with colour coding and size stamping Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 368 Stubby screwdriver for square head socket screws, # 2 x 25 mm kts: screwdriver for internal square screws, square 2 x 25 mm kpn: 368 Stubby kpn_dash: kpn_clear: 368Stubby bkpn: WERA 368 Stubby bkpn_clear: WERA 368Stubby c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008864001 sr_ns: WERA05008864001
r: 02835494 p: 10.28 pid: 42095 b: WERA q: 0 st: lt: 8 ean: 4013288108821 sr: WERA 05118103001 sr_no_br: 05118103001 sr_no_br_cl: 05118103001 sr_cl: WERA05118103001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 1/8" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon Product Range Wera Kraftform n: WERA 2052 Micro Kraftform hexagonal ball head screwdriver, 1/8" x 60 mm - 05118103001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Ballpoint profile: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver with ballpoint for hexagon socket screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Ballpoint for dependable working even in difficult installation situations Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hexagon ball end, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2052 Ball end hexagon screwdriver for electronic applications, 1/8" x 60 mm kts: Kraftform hexagonal ball head screwdriver, 1/8" x 60 mm kpn: 2052 Micro kpn_dash: kpn_clear: 2052Micro bkpn: WERA 2052 Micro bkpn_clear: WERA 2052Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118103001 sr_ns: WERA05118103001
r: 03326364 p: 10.26 pid: 159556 b: WERA q: 0 st: lt: 12 ean: 4013288228642 sr: WERA 05006522001 sr_no_br: 05006522001 sr_no_br_cl: 05006522001 sr_cl: WERA05006522001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip HEX 6 mm Drive profile size (bit) 6 mm Product Range Wera Kraftform Kompakt n: WERA 05006522001 Kraftform Kompakt VDE inserts for hexagon socket screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The Hex-Plus profile prevents hexagonal socket screws from cylindrical turning. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for hexagon socket screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application Hexagonal socket screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Hex-Plus; burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery Kraftform Kompakt VDE 64 i Take it easy, 6 x 157 mm kts: Kraftform Kompakt VDE inserts for hexagon socket screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006522001 kpn_dash: kpn_clear: 05006522001 bkpn: WERA 05006522001 bkpn_clear: WERA 05006522001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006522001 sr_ns: WERA05006522001
r: 08108030 p: 10.25 pid: 159606 b: WERA q: 0 st: lt: 8 ean: 4013288229090 sr: WERA 05006561001 sr_no_br: 05006561001 sr_no_br_cl: 05006561001 sr_cl: WERA05006561001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip HEX 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Kraftform Kompakt n: WERA 05006561001 Kraftform Kompakt VDE inserts for hexagon socket screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The Hex-Plus profile prevents hexagonal socket screws from cylindrical turning. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for hexagon socket screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application Hexagonal socket screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Hex-Plus; burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery Kraftform Kompakt VDE 64 i Take it easy SB, 2.5 x 157 mm kts: Kraftform Kompakt VDE inserts for hexagon socket screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006561001 kpn_dash: kpn_clear: 05006561001 bkpn: WERA 05006561001 bkpn_clear: WERA 05006561001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006561001 sr_ns: WERA05006561001
r: 02831666 p: 10.247 pid: 42840 b: WERA q: 0 st: lt: 12 ean: 4013288138408 sr: WERA 05028071001 sr_no_br: 05028071001 sr_no_br_cl: 05028071001 sr_cl: WERA05028071001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 25 x 300 mm - 05028071001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 25 x 300 mm kts: screwdriver with holding function, TX 25 x 300 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028071001 sr_ns: WERA05028071001
r: 08108062 p: 10.21 pid: 159626 b: WERA q: 0 st: lt: 8 ean: 4013288228840 sr: WERA 05006541001 sr_no_br: 05006541001 sr_no_br_cl: 05006541001 sr_cl: WERA05006541001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip T20 Drive profile size (bit) 20 Product Range Wera Kraftform Kompakt n: WERA 05006541001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application TORX® screws Blade Reduced blade diameter with integrated protective insulation, low lying TORX® screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 67 iS TORX® Take it easy, TX 20 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006541001 kpn_dash: kpn_clear: 05006541001 bkpn: WERA 05006541001 bkpn_clear: WERA 05006541001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006541001 sr_ns: WERA05006541001
