r: 02836356 p: 27.107 pid: 31094 b: WERA q: 20 st: 1 lt: 1 ean: 4013288144638 sr: WERA 05073230001 sr_no_br: 05073230001 sr_no_br_cl: 05073230001 sr_cl: WERA05073230001 sr_dash: sold: 1870.383 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Drive profile size 1/4" Length 180 mm Product Range Wera Zyklop n: WERA 8001 A SB Zyklop Mini 1 bit ratchet 1/4" SB with 1/4" adapter 2-piece - 05073230001 cn: BIT RATCHET cn2: BIT RATCHET cn_clear: BITRATCHET d: Product description The Wera Mini ratchet. Simple operation, even with just one hand, in confined working spaces. Drop-forged, full-steel design and fine-pitched mechanism with 60 teeth that allows a small return angle of 6° for precise working. The thumbwheel allows rapid fastening in confined situations when there is no space for ratcheting. Easy left/right switchover. Ergonomically designed ratchet head and lever. Suitable for 1/4" bit and socket take-up. Suitable for direct take-up of bits with 1/4" hex head drive Drop-forged, full-steel design Torque of over 65 Nm Fine-pitched ratchet mechanism and small return angle of 6 Ideal for working in confined spaces Application Suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4, Wera adaptor 870/1 for 1/4" sockets Design Drop-forged full steel design, fine-tooth ratchet mechanism, small return angle of 6°, forward and reverse drive switch Handle Kraftform handle with proven Kraftform geometry provides perfectly designed finger contact zones, ergonomic ratchet head and handle Features and benefits Zyklop Mini For all difficult-to-access applications. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Thumbwheel enables rapid screwdriving, even when there isn't sufficient room for ratcheting use. Simple switching between left/right operations. Its slim design makes it ideal for all particularly confined working situations. The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - 1/4" hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). ds: dsc: Scope of delivery 8001 A Zyklop Mini 1 Bit Ratchet 1/4" SB with 1/4" drive, 2 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 870/1 Adaptor: 1/4" x 25 mm kts: Zyklop Mini 1 bit ratchet 1/4" SB with 1/4" adapter 2-piece kpn: 8001 A SB kpn_dash: kpn_clear: 8001ASB bkpn: WERA 8001 A SB bkpn_clear: WERA 8001ASB c_path: Home / Our brands / Wera / Wera Ranges / Wera zyklop | Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit ratchet sr_no_br_cl_ns: 05073230001 sr_ns: WERA05073230001
r: 87010155 p: 6.1 pid: 71496 b: WERA q: 18 st: 1 lt: 1 ean: 4013288012920 sr: WERA 05059615001 sr_no_br: 05059615001 sr_no_br_cl: 05059615001 sr_cl: WERA05059615001 sr_dash: sold: 1848.3 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 5 mm Drive profile size (bit) 5 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 5 x 50 mm - 05059615001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 5 x 50 mm kts: hexagon bit, 5 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059615001 sr_ns: WERA05059615001
r: 03334368 p: 52.727 pid: 159674 b: WERA q: 0 st: lt: 12 ean: 4013288229946 sr: WERA 05006608001 sr_no_br: 05006608001 sr_no_br_cl: 05006608001 sr_cl: WERA05006608001 sr_dash: sold: 1845.445 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA 05006608001 Kraftform Kompakt VDE 16 extra slim 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description One 817 VDE Kraftform bitholding screwdriver and 14 VDE blades with Take it easy Tool finder: Colour coding and laser-engraved size indication. With reduced blade diameter and integrated protective insulation - low-lying screw and spring elements can be easily reached and operated. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. One single-pole phase tester. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE-insulated blades 157 mm length Reduced blade diameter with integrated protective insulation for lower-lying screws Blades with Take it easy Tool finder with colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 at 10,000 V 16-piece setOne Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication, with reduced blade diameter and integrated protective insulation, low-lying screw and spring elements can be easily reached and operated, one single-pole phase testerIn a robust belt pouch Features and benefits Why is the right tool so often missing at the workplace? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry keep them with you. So for us it was a clear challenge: to develop a tool that is suitable for a whole host of applications and can be easily taken along to the workplace. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch - and they are even VDE-tested, too. Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 16 extra slim 1 Tool finder, 16 pieces 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 16 extra slim 1 Tool Finder, 16-piece kpn: 05006608001 kpn_dash: kpn_clear: 05006608001 bkpn: WERA 05006608001 bkpn_clear: WERA 05006608001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006608001 sr_ns: WERA05006608001
r: 02814989 p: 14.71 pid: 17206 b: WERA q: 19 st: 1 lt: 1 ean: 4013288179838 sr: WERA 05057434001 sr_no_br: 05057434001 sr_no_br_cl: 05057434001 sr_cl: WERA05057434001 sr_dash: sold: 1779.91 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Slotted; Hexagon Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 Metal 1 screwdriver bit set, 30-piece - 05057434001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet for the take-up of bits with 1/4" hexagon head drive. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Multi-component Bit-Check that can be positioned upright for permanently secure bit storage. Hex-Plus allows socket head screws to live longer Upright positionable Bit-Checks convince due to their functionality in a minimum of space Particularly for metal applications Tough viscous bits for universal use Universal holder with stainless sleeve 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 29 bits, tough, for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery Bit-Check 30 Metal 1, 30 pieces 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 8x 851/1 Z bits: 3x PH 1x25 mm, 3x PH 2x25 mm, 2x PH 3x25 mm 9x 855/1 Z bits: 3x PZ 1x25 mm, 3x PZ 2x25 mm, 3x PZ 3x25 mm 6x 867/1 TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 3x 800/1 Z bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm 3x 840/1 Z bits: 4x25 mm, 5x25 mm, 6x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 Metal 1 kpn_dash: Bit kpn_clear: BitCheck30Metal1 bkpn: WERA Bit-Check 30 Metal 1 bkpn_clear: WERA BitCheck30Metal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057434001 sr_ns: WERA05057434001
r: 03041796 p: 148.099 pid: 32806 b: WERA q: 0 st: lt: 10 ean: 4013288194855 sr: WERA 05135973001 sr_no_br: 05135973001 sr_no_br_cl: 05135973001 sr_cl: WERA05135973001 sr_dash: sold: 1777.188 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Halfmoon/HIOS VDE approved No With safety colour code 1000V ESD Yes Supplied in Case Quantity per set 21 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt micro 21 ESD 1 screwdriver set for precision work 21-piece - 05135973001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of<= 10 9 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform Micro ESD bit holder Holder with anti-roll feature, rotating cap and quick-release chuck Bit holder suitable for the take-up of bits with 4 mm halfmoon or HIOS drive In a practical pouch 21-piece setPouch with 44 mm bits1 Kraftform Micro ESD bitholding screwdriver Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. ds: dsc: Scope of delivery Kraftform Kompakt Micro 21 ESD 1, 21 pieces 1x 1013 Kraftform Micro ESD Bitholding screwdriver: 97 mm 3x 851/9 C J PH bits, halfmoon: PH 000 x 44x1.5 mm, PH 00 x 44x1.8 mm, PH 0 x 44x1.8 mm 5x 867/9 C TORX® bits, halfmoon: TX 1x44 mm, TX 2x44 mm, TX 3x44 mm, TX 4x44 mm, TX 5x44 mm 4x 867/9 C IP TORX PLUS® bits: 1 IPx44 mm, 2 IPx44 mm, 3 IPx44 mm, 4 IPx44 mm 1x 867/9 IPR TORX PLUS® bits: 1 IPR x 44 x 1.5 mm 4x 872/9 bits for Microstix® screws: mx44 mm, 00x44 mm, Fx44 mm, 0x44 mm 2x 800/9 C bits: 0.23x1.5x44 mm, 0.35x2.5x44 mm 1x 869/9 Nutsetters: 2.5 x 44 mm kts: screwdriver set for precision work 21-piece kpn: Kraftform Kompakt micro 21 ESD 1 kpn_dash: kpn_clear: KraftformKompaktmicro21ESD1 bkpn: WERA Kraftform Kompakt micro 21 ESD 1 bkpn_clear: WERA KraftformKompaktmicro21ESD1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135973001 sr_ns: WERA05135973001
r: 41071072 p: 32.892 pid: 71141 b: WERA q: 4 st: 1 lt: 1 ean: 4013288018090 sr: WERA 05018282001 sr_no_br: 05018282001 sr_no_br_cl: 05018282001 sr_cl: WERA05018282001 sr_dash: sold: 1776.168 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 932/6 Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece - 05018282001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Impact cap and bolster for the transfer of higher torque Hexagonal blade extending through the handle The Wera Black Point tip offers an exact fit and optimum corrosion protection Storage rack for wall-mounting Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera makes its Kraftform handles from several materials with different properties. The core is made from a hardwearing plastic that holds the blade securely even when subjected to great forces. The yellow soft zones of the external mantle consist of a softer material with more friction resistance for high torque transfer. The black areas with a harder surface prevent the hand from sticking to the handle enabling you to adjust your grip more quickly. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 932/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces 2x 917 SPH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 932 A Screwdriver for slotted screws: 0.6x3.5x80 mm, 0.8x4.5x90 mm, 1x5.5x100 mm, 1.2x7x125 mm kts: Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece kpn: 932/6 kpn_dash: kpn_clear: 9326 bkpn: WERA 932/6 bkpn_clear: WERA 9326 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05018282001 sr_ns: WERA05018282001
r: 02829061 p: 25.454 pid: 42746 b: WERA q: 1 st: 1 lt: 1 ean: 4013288138927 sr: WERA 05073240001 sr_no_br: 05073240001 sr_no_br_cl: 05073240001 sr_cl: WERA05073240001 sr_dash: sold: 1730.872 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Inner hexagon VDE approved No With safety colour code 1000V ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 28 SB screwdriver handle with bit magazine 6-piece - 05073240001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Wera compact tools with multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Bit magazine integrated in the handle, for storage of 6 bits. The bayonet blade can be retracted for tight screwdriving situations. It can also be removed for machine operation.The strong permanent magnet guarantees a tight fit of the bits. Kraftform Kompakt 28 Kraftform holder with anti-roll feature, multi-component, bayonet blade and bit magazine Adaptor bayonet with stainless sleeve and strong permanent magnet Suitable for bits with 1/4" hexagon drive (Wera connecting series 1) Tough viscous bits for universal use Application Suitable for bits with 1/4" - external hexagon drive as per DIN ISO 1173-C 6,3 and Wera connection series 1 Design Attachment, telescopic, with stainless steel sleeve and strong permanent magnet Handle Kraftform with anti-roll protection, multi-component, integrated magazine Features and benefits The sets in the series Kraftform Kompakt 28 are really something. A 2 position telescopic blade can be retracted into the handle for confined space operation or extended for more reach. It can also be removed and used as a 100 mm bit holder in the power tool. Six bits are conveniently integrated into a push-button opening bit magazine. When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Strong permanent magnet for secure fit of bits. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Kraftform Kompakt 28 SB, 6 pieces 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 2x 800/1 Z bits: 1x5.5x25 mm, 1.2x6.5x25 mm kts: screwdriver handle with bit magazine 6-piece kpn: Kraftform Kompakt 28 SB kpn_dash: kpn_clear: KraftformKompakt28SB bkpn: WERA Kraftform Kompakt 28 SB bkpn_clear: WERA KraftformKompakt28SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05073240001 sr_ns: WERA05073240001
r: 08085418 p: 75.165 pid: 70284 b: WERA q: 0 st: lt: 12 ean: 4013288225320 sr: WERA 05150102001 sr_no_br: 05150102001 sr_no_br_cl: 05150102001 sr_cl: WERA05150102001 sr_dash: sold: 1653.63 p_range: none type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 16 n: WERA 9711 screwdriver set VDE Set 1 in foam insert 16-piece - 05150102001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 14 Wera Kraftform VDE screwdrivers as well as two screw grippers. High-quality, durable foam insert without chemical vapours Screwdriver with insulated blades for safe working up to 1,000 volt, five of which with reduced blade diameter for lower-lying screws Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 16-piece VDE-insulated screwdriver set (14 screwdrivers, 2 screw grippers) in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 46 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder. Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened. ds: dsc: Scope of delivery 9711 Foam insert VDE screwdriver set 1, 16 pieces 2x 162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 165 iS PZ VDE Insulated screwdriver with reduced blade diameter for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 165 i PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted): # 2 x 100 mm 3x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6 x 3.5 x 100 mm 5x 167 i VDE Insulated screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x80 mm, TX 25x100 mm, TX 30x100 mm 1x 1440 Screw Gripper: 4.5-6 x 41 mm 1x 1442 Screw Gripper: 6.0-8.5 x 41 mm 1x 9811 Foam insert VDE screwdriver set 1, empty: 344 x 30 x 392 mm kts: screwdriver set VDE Set 1 in foam insert 16-piece kpn: 9711 kpn_dash: kpn_clear: 9711 bkpn: WERA 9711 bkpn_clear: WERA 9711 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module sr_no_br_cl_ns: 05150102001 sr_ns: WERA05150102001
r: 02098337 p: 40.826 pid: 44123 b: WERA q: 3 st: 1 lt: 1 ean: 4013288118226 sr: WERA 05223161001 sr_no_br: 05223161001 sr_no_br_cl: 05223161001 sr_cl: WERA05223161001 sr_dash: sold: 1633.04 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 7 Product Range Wera Kraftform n: WERA 367/7 TORX HF Kraftform Plus screwdriver set with holding function in holder 7-piece - 05223161001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Comes with holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for TORX® screws; holding function Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Holding function for TORX® screws, chrome-plated Application TORX®, with holding function for TORX® screws made according to Acument Intellectual Properties specifications Content 7-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367/7 TORX® HF Kraftform Plus Screwdriver set with holding function and rack, 7 pieces 7x 367 TORX® HF Screwdriver with holding function for TORX® screws: TX 8x60 mm, TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 27x115 mm, TX 30x115 mm kts: Kraftform Plus screwdriver set with holding function in holder 7-piece kpn: 367/7 TORX HF kpn_dash: kpn_clear: 3677TORXHF bkpn: WERA 367/7 TORX HF bkpn_clear: WERA 3677TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05223161001 sr_ns: WERA05223161001
r: 41071142 p: 70.909 pid: 71149 b: WERA q: 0 st: lt: 14 ean: 4013288000675 sr: WERA 05002990001 sr_no_br: 05002990001 sr_no_br_cl: 05002990001 sr_cl: WERA05002990001 sr_dash: sold: 1630.907 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No ESD No Supplied in Case Quantity per set 11 n: WERA 88/1 Vario-Set screwdriver set 11-piece - 05002990001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 11-piece Vario set with handle and blades. In a practical belt pouch, enabling the tools to be safely and securely stored and to always be at hand. The Kraftform grip on the handle stands for pleasant, ergonomic working and makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The hexagonal non-roll feature prevents any annoying rolling away at the workplace. The integrated hex bolster allows higher torque to be applied with an open-end or ring spanner. The double blades are out of high quality bit material and are therefore particularly durable. The Wera Black Point tip on the blade offers a perfect fit and optimised corrosion protection. Vario set with handle and 10 combination blades Smooth hard zones for high speed turning, soft grip zones for high torque transfer Chrome-plated hexagonal blade material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection In a robust belt pouch 11-piece set, specifically for demanding workshop environments Features and benefits The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 88/1 Vario set, 11 pieces 1x 80 Vario handle: 6 x 98 mm 1x 85 Combination blade for Phillips screws: PH 1 x PH 2 x 175 mm 1x 86 Combination blade for Pozidriv screws: PZ 1 x PZ 2 x 175 mm 3x 87 Combination blade for TORX® screws: TX 10xTX 15x175 mm, TX 20xTX 25x175 mm, TX 30xTX 40x175 mm 2x 81 Combination blade for slotted screws: 0.6x4x1x6x175 mm, 0.8x5x1.2x7x175 mm 3x 84 Combination blade for hexagon socket screws: 4x4 x 175 mm, 5x5 x 175 mm, 6x6 x 175 mm kts: screwdriver set 11-piece kpn: 88/1 Vario-Set kpn_dash: 88/1 Vario kpn_clear: 881VarioSet bkpn: WERA 88/1 Vario-Set bkpn_clear: WERA 881VarioSet c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set sr_no_br_cl_ns: 05002990001 sr_ns: WERA05002990001
r: 02830469 p: 37.024 pid: 42391 b: WERA q: 3 st: 1 lt: 1 ean: 4013288160713 sr: WERA 05006480001 sr_no_br: 05006480001 sr_no_br_cl: 05006480001 sr_cl: WERA05006480001 sr_dash: sold: 1629.056 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 Product Range Wera Kraftform n: WERA 160 iS/7 screwdriver set Kraftform Plus Series 100 + single-pole phase tester in holder, reduced blade diameter 7-piece - 05006480001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with reduced shaft diameter and integrated insulation protection so that even low-lying screw and spring elements can be accessed and actuated. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including single-pole phase tester and 1 rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Reduced shaft diameter Kraftform: The safety screwdriver. With reduced blade diameter, single-pole phase tester and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and PlusMinus screws (Pozidriv/slotted) Content 7-piece set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 iS/7 Rack Screwdriver set Kraftform Plus Series 100, single-pole phase tester and rack. With reduced blade diameter, 7 pieces 2x 162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws: PH 1x80 mm, PH 2x100 mm 1x 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted): # 2 x 100 mm 3x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm kts: screwdriver set Kraftform Plus Series 100 + single-pole phase tester in holder, reduced blade diameter 7-piece kpn: 160 iS/7 kpn_dash: kpn_clear: 160iS7 bkpn: WERA 160 iS/7 bkpn_clear: WERA 160iS7 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006480001 sr_ns: WERA05006480001
r: 41070210 p: 11.34 pid: 70511 b: WERA q: 77 st: 1 lt: 1 ean: 4013288027221 sr: WERA 05006100001 sr_no_br: 05006100001 sr_no_br_cl: 05006100001 sr_cl: WERA05006100001 sr_dash: sold: 1610.28 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 2,5 mm Blade length 80 mm Blade thickness 0,4 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 i VDE insulated slotted screwdriver, 0.4 x 2.5 x 80 mm - 05006100001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i VDE Insulated screwdriver for slotted screws, 0.4 x 2.5 x 80 mm kts: insulated slotted screwdriver, 0.4 x 2.5 x 80 mm kpn: 160 i VDE kpn_dash: kpn_clear: 160iVDE bkpn: WERA 160 i VDE bkpn_clear: WERA 160iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006100001 sr_ns: WERA05006100001
r: 41071147 p: 31.239 pid: 71150 b: WERA q: 2 st: 1 lt: 1 ean: 4013288041715 sr: WERA 05006148001 sr_no_br: 05006148001 sr_no_br_cl: 05006148001 sr_cl: WERA05006148001 sr_dash: sold: 1593.189 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 Product Range Wera Kraftform n: WERA 160 i/165 i/7 Rack Kraftform Plus series 100 screwdriver set + single-pole phase tester in holder 7-piece - 05006148001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including single-pole phase tester and 1 rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform: The safety screwdriver with Lasertip blade, single-pole phase tester and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Content 7-piece set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i/165 i/7 Rack Screwdriver set Kraftform Plus Series 100, single-pole phase tester and rack, 7 pieces 2x 165 i PZ VDE Insulated screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 4x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm kts: Kraftform Plus series 100 screwdriver set + single-pole phase tester in holder 7-piece kpn: 160 i/165 i/7 Rack kpn_dash: kpn_clear: 160i165i7Rack bkpn: WERA 160 i/165 i/7 Rack bkpn_clear: WERA 160i165i7Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006148001 sr_ns: WERA05006148001
r: 41071079 p: 28.76 pid: 70447 b: WERA q: 80 st: 1 lt: 1 ean: 4013288003133 sr: WERA 05105650001 sr_no_br: 05105650001 sr_no_br_cl: 05105650001 sr_cl: WERA05105650001 sr_dash: sold: 1581.8 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334/6 screwdriver set Kraftform Plus laser tip in holder 6-piece - 05105650001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti--roll feature prevents any bothersome rolling away at the workplace. Includes practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and cross-recess screws, Phillips Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip round blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 334/6 Rack Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 1x 334 Screwdriver for slotted screws: 1.2 x 6.5 x 150 mm 3x 335 Screwdriver for slotted screws: 0.5x3x80 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus laser tip in holder 6-piece kpn: 334/6 kpn_dash: kpn_clear: 3346 bkpn: WERA 334/6 bkpn_clear: WERA 3346 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05105650001 sr_ns: WERA05105650001
r: 02611092 p: 9.276 pid: 44316 b: WERA q: 25 st: 1 lt: 1 ean: 4013288157515 sr: WERA 05057665001 sr_no_br: 05057665001 sr_no_br_cl: 05057665001 sr_cl: WERA05057665001 sr_dash: sold: 1576.92 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 Drive profile size (bit) 25 n: WERA 867/4 IMP DC TORX DIY bit, TX 25 x 50 mm - 05057665001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 1x 867/4 IMP DC Impaktor TORX® Bit: TX 25 x 50 mm kts: bit, TX 25 x 50 mm kpn: 867/4 IMP DC TORX DIY kpn_dash: kpn_clear: 8674IMPDCTORXDIY bkpn: WERA 867/4 IMP DC TORX DIY bkpn_clear: WERA 8674IMPDCTORXDIY c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools bit set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools sr_no_br_cl_ns: 05057665001 sr_ns: WERA05057665001
r: 87011025 p: 26.28 pid: 19792 b: WERA q: 2 st: 1 lt: 1 ean: 4013288180018 sr: WERA 05057415001 sr_no_br: 05057415001 sr_no_br_cl: 05057415001 sr_cl: WERA05057415001 sr_dash: sold: 1576.8 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 7 Product Range Wera Bit-Check n: WERA Bit-Check 7 TX Diamond 1 screwdriver bit set 7-piece - 05057415001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable Bit-Checks convince due to their functionality in a minimum of space BiTorsion bits for long service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Rapidaptor holder for rapid bit change Take it easy tool finder: colour coding according to profile and size 1 bit holder Rapidaptor with quick-release chuck, 6 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 7 TX Diamond 1, 7 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 6x 867/1 BDC TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 7-piece kpn: Bit-Check 7 TX Diamond 1 kpn_dash: Bit kpn_clear: BitCheck7TXDiamond1 bkpn: WERA Bit-Check 7 TX Diamond 1 bkpn_clear: WERA BitCheck7TXDiamond1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057415001 sr_ns: WERA05057415001
r: 87990598 p: 15.537 pid: 75938 b: WERA q: 0 st: lt: 12 ean: 4013288101242 sr: WERA 05052504001 sr_no_br: 05052504001 sr_no_br_cl: 05052504001 sr_cl: WERA05052504001 sr_dash: sold: 1538.163 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Outer hexagon With lock Yes Magnetic Yes Length 100 mm n: WERA 889/4 R Rapidaptor universal bit holder, 1/4" x 100 mm - 05052504001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagon, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Rapidaptor technology for rapid bit change Rapidaptor universal holder for bits with 1/4" hexagon drive, magnetic 1/4" hexagon drive Application Suitable for 1/4" DIN ISO 1173-C 6,3 and E 6,3 hexagon insert bits and Wera Series 1 and 4 Drive 1/4" hexagon suitable for power tools with DIN ISO 1173-F 6,3 receiver Design 1/4" hexagon with Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all, and single-hand technology, magnetic Features and benefits Bitholders, magnetic, for easier application of the screw Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Also available in a BiTorsion design. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. ds: dsc: Scope of delivery 889/4 R Rapidaptor Universal Bit Holder, 1/4" x 100 mm kts: Rapidaptor universal bit holder, 1/4" x 100 mm kpn: 889/4 R kpn_dash: kpn_clear: 8894R bkpn: WERA 889/4 R bkpn_clear: WERA 8894R c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05052504001 sr_ns: WERA05052504001
r: 41071294 p: 64.297 pid: 71876 b: WERA q: 0 st: lt: 9 ean: 4013288115713 sr: WERA 05071116001 sr_no_br: 05071116001 sr_no_br_cl: 05071116001 sr_cl: WERA05071116001 sr_dash: sold: 1478.831 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Inner hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Stainless screwdriver handle with stainless steel change blades in belt pouch 17-piece - 05071116001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with bits in a length of 89 mm. Includes Kraftform holder 3816 R with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Stainless design to prevent the formation of extraneous rust. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Handle/Interchangeable blade system for rapid exchange of the blade Rapidaptor technology for rapid bit change Storage and transport in a robust belt pouch Pouch with 89 mm bits, stainless steel17-piece set1 Kraftform stainless bitholding screwdriver 3816 R with Rapidaptor quick-release chuck Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The tools can be stored and carried in a robust belt pouch, keeping them always to hand. ds: dsc: Scope of delivery Kraftform Kompakt 60, stainless, 17 pieces 1x 3816 R Bitholding screwdriver with Rapidaptor quick-release chuck, stainless: 1/4" x 119 mm 3x 3851/4 Bits, stainless: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 3855/4 Bits, stainless: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 3867/4 TORX® BO bits with bore hole, stainless: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 3800/4 Bits, stainless: 1 x 5.5 x 89 mm 4x 3840/4 Bits, stainless: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: screwdriver handle with stainless steel change blades in belt pouch 17-piece kpn: Kraftform Kompakt 60 Stainless kpn_dash: kpn_clear: KraftformKompakt60Stainless bkpn: WERA Kraftform Kompakt 60 Stainless bkpn_clear: WERA KraftformKompakt60Stainless c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05071116001 sr_ns: WERA05071116001
r: 03176967 p: 14.71 pid: 33891 b: WERA q: 4 st: 1 lt: 1 ean: 4013288217776 sr: WERA 05008874001 sr_no_br: 05008874001 sr_no_br_cl: 05008874001 sr_cl: WERA05008874001 sr_dash: sold: 1441.58 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 2 compact screwdriver with internal bit magazine 6-piece - 05008874001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; BiTorsion bits for long service life, tough, for universal use. Take it easy tool finder: Size stamping and tips with colour coding to find the required bit quickly. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The magnet ensures that the bit is securely seated in the holder. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 2, 6 pieces 2x 800/1 BTZ bits: 0.8x5.5x25 mm, 1.2x6.5x25 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm kts: compact screwdriver with internal bit magazine 6-piece kpn: Kraftform Kompakt Stubby Magazin 2 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin2 bkpn: WERA Kraftform Kompakt Stubby Magazin 2 bkpn_clear: WERA KraftformKompaktStubbyMagazin2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008874001 sr_ns: WERA05008874001
r: 02815006 p: 62.314 pid: 18532 b: WERA q: 0 st: lt: 10 ean: 4013288145765 sr: WERA 05346293001 sr_no_br: 05346293001 sr_no_br_cl: 05346293001 sr_cl: WERA05346293001 sr_dash: sold: 1433.222 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Torx; Hexagon; Slotted; Square Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 31 Product Range Wera Bit-Check n: WERA Bit-Check 30 Zyklop Mini 2 screwdriver bit set 31-piece - 05346293001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description The Wera Mini ratchet: a symbiosis of strength and stylishness. Incredibly robust due to its drop-forged, full-steel design. Can withstand torque forces up to 65 Nm. The petite sizing is particularly suited for work in confined spaces. The thumbwheel allows fast screwdriving. Comes in a set in the proven Wera Bit-Check with socket adaptor and belt clip. Simple tool removal and reinsertion is ensured, very robust and durable. Bit-Checks convince due to their functionality in a minimum of space Wera Mini ratchet for particularly fast screwdriving even in confined spaces Ideal for working in confined spaces Tough viscous bits for universal use In handy and robust Bit-Check 28 bits, 1 Rapidaptor bit holder, 1 adaptor 870/1 (1/4" hexagon to 1/4" square ), 1 Wera Bit Ratchet Zyklop Mini 1, drop-forged full steel design, suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 Features and benefits Zyklop Mini For all difficult-to-access applications. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Thumbwheel enables rapid screwdriving, even when there isn't sufficient room for ratcheting use. Simple switching between left/right operations. Its slim design makes it ideal for all particularly confined working situations. The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - 1/4" hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). ds: dsc: Scope of delivery Bit-Check 30 Zyklop Mini 2, 31 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 1x 870/1 Adaptor: 1/4" x 25 mm 6x 851/1 TZ bits: 2x PH 1x25 mm, 3x PH 2x25 mm, PH 3x25 mm 6x 867/1 TZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 5x 867/1 Z TORX® BO bits with bore hole: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 5x 840/1 Z bits: 3/32"x25 mm, 1/8"x25 mm, 5/32"x25 mm, 3/16"x25 mm, 1/4"x25 mm 1x 800/1 TZ bits: 1 x 5.5 x 25 mm 5x 868/1 Z Square-Plus bits: # 1x25 mm, 3x # 2x25 mm, # 3x25 mm kts: screwdriver bit set 31-piece kpn: Bit-Check 30 Zyklop Mini 2 kpn_dash: Bit kpn_clear: BitCheck30ZyklopMini2 bkpn: WERA Bit-Check 30 Zyklop Mini 2 bkpn_clear: WERA BitCheck30ZyklopMini2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05346293001 sr_ns: WERA05346293001
