r: 03229723 p: 86.446 pid: 71799 b: WERA q: 0 st: lt: 12 ean: 4013288188212 sr: WERA 05074822010 sr_no_br: 05074822010 sr_no_br_cl: 05074822010 sr_cl: WERA05074822010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 ESD Kraftform torque screwdriver with 89mm handle 0.3-1.0 Nm - 05074822010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 ESD x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle 0.3-1.0 Nm kpn: 7451 ESD kpn_dash: kpn_clear: 7451ESD bkpn: WERA 7451 ESD bkpn_clear: WERA 7451ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074822010 sr_ns: WERA05074822010
r: 02836012 p: 85.619 pid: 42083 b: WERA q: 0 st: lt: 12 ean: 4013288179050 sr: WERA 05074828001 sr_no_br: 05074828001 sr_no_br_cl: 05074828001 sr_cl: WERA05074828001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7456 ESD Kraftform adjustable torque screwdriver with standard setting and quick-change holder 0.3 Nm x 0.3-1.0 Nm - 05074828001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Kraftform handle for fast and ergonomic screwdriving Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque 0.1 Nm, 0.3 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.0 Nm) and quick-release chuck, 7456 ESD x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform adjustable torque screwdriver with standard setting and quick-change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7456 ESD kpn_dash: kpn_clear: 7456ESD bkpn: WERA 7456 ESD bkpn_clear: WERA 7456ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074828001 sr_ns: WERA05074828001
r: 03229728 p: 85.082 pid: 71042 b: WERA q: 0 st: lt: 12 ean: 4013288188243 sr: WERA 05074842010 sr_no_br: 05074842010 sr_no_br_cl: 05074842010 sr_cl: WERA05074842010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 ESD Kraftform torque screwdriver 1.2-3.0 Nm - 05074842010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 ESD x 1.2-3.0 Nm kts: Kraftform torque screwdriver 1.2-3.0 Nm kpn: 7461 ESD kpn_dash: kpn_clear: 7461ESD bkpn: WERA 7461 ESD bkpn_clear: WERA 7461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074842010 sr_ns: WERA05074842010
r: 03229724 p: 84.958 pid: 70083 b: WERA q: 0 st: lt: 12 ean: 4013288188229 sr: WERA 05074824010 sr_no_br: 05074824010 sr_no_br_cl: 05074824010 sr_cl: WERA05074824010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 ESD Kraftform torque screwdriver with 89mm handle 0.9-1.5 Nm - 05074824010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 ESD x 0.9-1.5 Nm kts: Kraftform torque screwdriver with 89mm handle 0.9-1.5 Nm kpn: 7452 ESD kpn_dash: kpn_clear: 7452ESD bkpn: WERA 7452 ESD bkpn_clear: WERA 7452ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074824010 sr_ns: WERA05074824010
r: 02836011 p: 82.809 pid: 43828 b: WERA q: 0 st: lt: 12 ean: 4013288179067 sr: WERA 05074826001 sr_no_br: 05074826001 sr_no_br_cl: 05074826001 sr_cl: WERA05074826001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7455 ESD Kraftform adjustable torque screwdriver standard setting and quick-change holder 0.1 Nm x 0.1-0.34 Nm - 05074826001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Kraftform handle for fast and ergonomic screwdriving Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque 0.1 Nm, 0.3 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.0 Nm) and quick-release chuck, 7455 ESD x 0.1 Nm x 0.1-0.34 Nm kts: Kraftform adjustable torque screwdriver standard setting and quick-change holder 0.1 Nm x 0.1-0.34 Nm kpn: 7455 ESD kpn_dash: kpn_clear: 7455ESD bkpn: WERA 7455 ESD bkpn_clear: WERA 7455ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074826001 sr_ns: WERA05074826001
r: 03229745 p: 75.537 pid: 70087 b: WERA q: 0 st: lt: 12 ean: 4013288188274 sr: WERA 05074721010 sr_no_br: 05074721010 sr_no_br_cl: 05074721010 sr_cl: WERA05074721010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 25 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 25-55 in lbs Max. tightening torque 55 in lbs Product Range Wera Kraftform n: WERA 7467 Kraftform torque screwdriver with pistol grip 25-55 in. lbs. - 05074721010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with pistol handle Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Multi-component Kraftform handle for high working speeds Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Pre-set torque, adjustable within a defined range. Also available in ESD version (also for HIOS/Halfmoon bits) and with Kraftform Micro handle. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The pre-set torque screwdrivers 7400, 1460, 1461 with a pre-set torque value can be set to any value within the specified metered range in the test laboratory. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7467 x 25-55 in. lbs. kts: Kraftform torque screwdriver with pistol grip 25-55 in. lbs. kpn: 7467 kpn_dash: kpn_clear: 7467 bkpn: WERA 7467 bkpn_clear: WERA 7467 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074721010 sr_ns: WERA05074721010
r: 02834282 p: 74.214 pid: 41978 b: WERA q: 0 st: lt: 12 ean: 4013288102881 sr: WERA 05074710001 sr_no_br: 05074710001 sr_no_br_cl: 05074710001 sr_cl: WERA05074710001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7445 Kraftform adjustable torque screwdriver (2.5 - 29.0 in. lbs.) with Rapidaptor quick-change holder 2.5-11.5 in. lbs. - 05074710001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (2.5-29.0 in. lbs.) with Rapidaptor quick-release chuck, 7445 x 2.5-11.5 in. lbs. kts: Kraftform adjustable torque screwdriver (2.5 - 29.0 in. lbs.) with Rapidaptor quick-change holder 2.5-11.5 in. lbs. kpn: 7445 kpn_dash: kpn_clear: 7445 bkpn: WERA 7445 bkpn_clear: WERA 7445 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074710001 sr_ns: WERA05074710001
r: 02834289 p: 74.049 pid: 41963 b: WERA q: 0 st: lt: 12 ean: 4013288102898 sr: WERA 05074711001 sr_no_br: 05074711001 sr_no_br_cl: 05074711001 sr_cl: WERA05074711001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 11 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 11-29 in lbs Max. tightening torque 29 in lbs Product Range Wera Kraftform n: WERA 7446 Kraftform adjustable torque screwdriver (2.5 - 29.0 in. lbs.) with Rapidaptor quick-change holder 11-29 in. lbs. - 05074711001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (2.5-29.0 in. lbs.) with Rapidaptor quick-release chuck, 7446 x 11-29 in. lbs. kts: Kraftform adjustable torque screwdriver (2.5 - 29.0 in. lbs.) with Rapidaptor quick-change holder 11-29 in. lbs. kpn: 7446 kpn_dash: kpn_clear: 7446 bkpn: WERA 7446 bkpn_clear: WERA 7446 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074711001 sr_ns: WERA05074711001
r: 03229739 p: 70.206 pid: 70505 b: WERA q: 0 st: lt: 12 ean: 4013288188267 sr: WERA 05074722010 sr_no_br: 05074722010 sr_no_br_cl: 05074722010 sr_cl: WERA05074722010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 11 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 11-29 in lbs Max. tightening torque 29 in lbs Product Range Wera Kraftform n: WERA 7466 Kraftform torque screwdriver 11-29 in. lbs. - 05074722010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7466 x 11-29 in. lbs. kts: Kraftform torque screwdriver 11-29 in. lbs. kpn: 7466 kpn_dash: kpn_clear: 7466 bkpn: WERA 7466 bkpn_clear: WERA 7466 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074722010 sr_ns: WERA05074722010
r: 03229636 p: 70.206 pid: 71790 b: WERA q: 0 st: lt: 8 ean: 4013288188144 sr: WERA 05074715010 sr_no_br: 05074715010 sr_no_br_cl: 05074715010 sr_cl: WERA05074715010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 Kraftform torque screwdriver with fixed preset measuring range 0.3-1.2 Nm - 05074715010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 x 0.3-1.2 Nm kts: Kraftform torque screwdriver with fixed preset measuring range 0.3-1.2 Nm kpn: 7460 kpn_dash: kpn_clear: 7460 bkpn: WERA 7460 bkpn_clear: WERA 7460 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074715010 sr_ns: WERA05074715010
r: 03229635 p: 69.256 pid: 69760 b: WERA q: 0 st: lt: 8 ean: 4013288188137 sr: WERA 05074794010 sr_no_br: 05074794010 sr_no_br_cl: 05074794010 sr_cl: WERA05074794010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm - 05074794010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 x 0.9-1.5 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm kpn: 7452 kpn_dash: kpn_clear: 7452 bkpn: WERA 7452 bkpn_clear: WERA 7452 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074794010 sr_ns: WERA05074794010
r: 03229633 p: 69.256 pid: 71786 b: WERA q: 0 st: lt: 8 ean: 4013288188113 sr: WERA 05074792010 sr_no_br: 05074792010 sr_no_br_cl: 05074792010 sr_cl: WERA05074792010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm - 05074792010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 kpn_dash: kpn_clear: 7451 bkpn: WERA 7451 bkpn_clear: WERA 7451 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074792010 sr_ns: WERA05074792010
r: 02836013 p: 67.603 pid: 42154 b: WERA q: 0 st: lt: 12 ean: 4013288179487 sr: WERA 05074840001 sr_no_br: 05074840001 sr_no_br_cl: 05074840001 sr_cl: WERA05074840001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 ESD Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm - 05074840001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 ESD x 0.3 Nm x 0.3-1.2 Nm kts: Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm kpn: 7460 ESD kpn_dash: kpn_clear: 7460ESD bkpn: WERA 7460 ESD bkpn_clear: WERA 7460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074840001 sr_ns: WERA05074840001
r: 02836008 p: 67.438 pid: 42070 b: WERA q: 0 st: lt: 12 ean: 4013288179470 sr: WERA 05074822001 sr_no_br: 05074822001 sr_no_br_cl: 05074822001 sr_cl: WERA05074822001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 ESD Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm - 05074822001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 ESD x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 ESD kpn_dash: kpn_clear: 7451ESD bkpn: WERA 7451 ESD bkpn_clear: WERA 7451ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074822001 sr_ns: WERA05074822001
r: 03229638 p: 65.785 pid: 70079 b: WERA q: 0 st: lt: 8 ean: 4013288188151 sr: WERA 05074716010 sr_no_br: 05074716010 sr_no_br_cl: 05074716010 sr_cl: WERA05074716010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 Kraftform torque screwdriver with fixed preset measuring range 1.2-3.0 Nm - 05074716010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 x 1.2-3.0 Nm kts: Kraftform torque screwdriver with fixed preset measuring range 1.2-3.0 Nm kpn: 7461 kpn_dash: kpn_clear: 7461 bkpn: WERA 7461 bkpn_clear: WERA 7461 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074716010 sr_ns: WERA05074716010
r: 03229630 p: 64.958 pid: 71782 b: WERA q: 0 st: lt: 8 ean: 4013288188106 sr: WERA 05074790010 sr_no_br: 05074790010 sr_no_br_cl: 05074790010 sr_cl: WERA05074790010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7450 Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm - 05074790010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 x 0.1-0.34 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm kpn: 7450 kpn_dash: kpn_clear: 7450 bkpn: WERA 7450 bkpn_clear: WERA 7450 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074790010 sr_ns: WERA05074790010
r: 03229736 p: 64.958 pid: 71803 b: WERA q: 0 st: lt: 12 ean: 4013288188250 sr: WERA 05074720010 sr_no_br: 05074720010 sr_no_br_cl: 05074720010 sr_cl: WERA05074720010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform torque screwdriver 2.5-11.5 in. lbs. - 05074720010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7465 x 2.5-11.5 in. lbs. kts: Kraftform torque screwdriver 2.5-11.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720010 sr_ns: WERA05074720010
r: 08103838 p: 48.099 pid: 70275 b: WERA q: 0 st: lt: 8 ean: 4013288228970 sr: WERA 05051012001 sr_no_br: 05051012001 sr_no_br_cl: 05051012001 sr_cl: WERA05051012001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Mixed VDE approved No With safety colour code 1000V No Supplied in On rack Quantity per set 9 Product Range Wera Kraftform n: WERA 9650 magnetic strip Kraftform screwdriver set 10-piece - 05051012001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Kraftform screwdriver set, 9-piece set, on a magnetic rail. Screwdriver all-round set. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. 932 A with pound-thru hexagonal blade and impact cap; 350, 355 and 335 with Lasertip: The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. 160 iS VDE-insulated and with Lasertip. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The clips hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. For every application the right tool The clips hold the tools perfectly With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. Multi-component Kraftform handle for high working speeds and ergonomic screwdriving VDE-insulated screwdrivers 9-piece set6 Kraftform series 300 screwdrivers; for Phillips-head screws Phillips and Pozidriv (with Lasertip) and TORX® screws. One Kraftform series 100 VDE slotted screwdriver with reduced blade diameter. With Take it easy Tool finder: Colour coding by profile and size stamping. 2 chiseldrivers for slotted screws; for screwdriving, chiseling, mortising. One terminal block, which can be securely attached to metal surfaces via magnets. The rail can also be bolted to the wall. Features and benefits With its strong magnet, the rail can be attached securely to metal surfaces. The plastic magnetic rail offers space for up to 9 Kraftform screwdrivers. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. ds: dsc: Scope of delivery 9650 Magnetic rail Kraftform screwdriver set, 9 pieces 2x 932 A Screwdriver for slotted screws: 1x5.5x100 mm, 1.2x7x125 mm 1x 350 PH Screwdriver for Phillips screws: PH 2 x 100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 2x 367 Screwdriver for TORX® screws: TX 20x100 mm, TX 25x100 mm 1x 335 Screwdriver for slotted screws: 0.8 x 4 x 100 mm 1x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6 x 3.5 x 100 mm 1x 9611 Magnetic rail for up to 9 Kraftform screwdrivers, empty: 30 x 400 mm kts: magnetic strip Kraftform screwdriver set 10-piece kpn: 9650 kpn_dash: kpn_clear: 9650 bkpn: WERA 9650 bkpn_clear: WERA 9650 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05051012001 sr_ns: WERA05051012001
r: 41973941 p: 47.438 pid: 71384 b: WERA q: 0 st: lt: 12 ean: 4013288102942 sr: WERA 05074720001 sr_no_br: 05074720001 sr_no_br_cl: 05074720001 sr_cl: WERA05074720001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform adjustable torque screwdriver with standard settings with Rapidaptor quick-change holder 2.5 in. lbs. - 05074720001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 2.5 in.lbs., 11.0 in.lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7465 x 2.5 in. lbs. kts: Kraftform adjustable torque screwdriver with standard settings with Rapidaptor quick-change holder 2.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720001 sr_ns: WERA05074720001
r: 08121658 p: 40.33 pid: 173489 b: WERA q: 0 st: lt: 8 ean: 4013288232601 sr: WERA 05137315001 sr_no_br: 05137315001 sr_no_br_cl: 05137315001 sr_cl: WERA05137315001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Length 392 mm Width 344 mm Height 30 mm Material Foam Color Black For model KRAFTFORM MICRO SET 1 Product Range Wera Kraftform n: WERA 9815 foam insert for screwdrivers Kraftform Micro Set 1, without tools - 05137315001 cn: TOOL TRAY INSERT cn2: TOOL TRAY INSERT cn_clear: TOOLTRAYINSERT d: Product description One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 344 x 30 x 392 mm; spare foam insert for Wera item 9715; suitable for the Tool Rebel roller cabinet. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 344 x 30 x 392 mm; spare foam insert for Wera item 9715; suitable for the Tool Rebel roller cabinet. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. ds: dsc: Scope of delivery 9815 Foam insert Kraftform Micro screwdriver set 1, empty, 344 x 30 x 392 mm kts: foam insert for screwdrivers Kraftform Micro Set 1, without tools kpn: 9815 kpn_dash: kpn_clear: 9815 bkpn: WERA 9815 bkpn_clear: WERA 9815 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool tray insert | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool tray insert | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05137315001 sr_ns: WERA05137315001
