r: 03166698 p: 13.057 pid: 32939 b: WERA q: 0 st: lt: 15 ean: 4013288212726 sr: WERA 05020207001 sr_no_br: 05020207001 sr_no_br_cl: 05020207001 sr_cl: WERA05020207001 sr_dash: sold: 39.171 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 16 mm Length 182 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (16 x 182 mm) - 05020207001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 16 x 182 mm kts: ring spanner (16 x 182 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020207001 sr_ns: WERA05020207001
r: 08085377 p: 39.008 pid: 70681 b: WERA q: 0 st: lt: 8 ean: 4013288221780 sr: WERA 05020152001 sr_no_br: 05020152001 sr_no_br_cl: 05020152001 sr_cl: WERA05020152001 sr_dash: sold: 39.008 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 1 13 mm Length 190 mm Non-sparking No VDE approved Yes With safety colour code 1000V No Width across flats 2 16 mm Product Range Wera Joker n: WERA 6004 Joker VDE M insulated self-adjusting spanner, 13-16 x 1/2-5/8" x 190 mm - 05020152001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Individually tested tools as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. The adjustable VDE spanner continuously and automatically grips all hexagonal sizes in the indicated range of dimensions - metric and imperial. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. The adjustable Joker 6004 VDE has a naturally comfortable handle thanks to the 2-component plastic insulation. Safety is increased by the anti-slip protection at the front end of the handle. The sliding function offers contactless and safe opening of the non-insulated jaws, thereby providing extra protection. For hexagon screw heads and bolts with wrench sizes 13.0; 14.0; 15.0; 16.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/2"; 17/32"; 9/16"; 19/32"; 5/8" (imperial) The adjustable Joker 6004 VDE covers all metric and imperial dimensions in the respective field of application Individually tested tools with insulated handles for safe working up to 1,000 volt, with anti-slip protection and sliding function for contactless and safe opening of the non-insulated jaws Automatically and continuously gripping hexagon screws and bolts Application Hexagonal screw heads and bolts with wrench sizes 13,0; 14,0; 15,0; 16,0 (metric) and 1/2"; 17/32"; 9/16"; 19/32"; 5/8" (imperial) Design Insulated, individually tested as per IEC 60900; 2-component plastic foam insulation; self-setting spanner with ratchet function; open end side adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaws; anti-slip protection at the front end of the handle; sliding function for contactless and safe opening of the non-insulated jaws; hole for hanging Features and benefits Joker 6004 VDE: ratchet mechanism for quick working The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The sliding function allows contactless and safe opening of the non-insulated jaws. The anti-slip protection at the front end of the handle ensures a secure hold and prevents your hand from accidentally slipping forward. With its automatically and continuously gripping parallel jaws the Joker 6004 VDE spanner covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the Joker 6004 VDE offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted via the corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. ds: dsc: Scope of delivery 6004 Joker VDE M VDE-insulated, self-setting spanner, 13; 14; 15; 16 x 1/2; 17/32; 9/16; 19/32; 5/8" x 190 mm kts: insulated self-adjusting spanner, 13-16 x 1/2-5/8" x 190 mm kpn: 6004 Joker VDE M kpn_dash: kpn_clear: 6004JokerVDEM bkpn: WERA 6004 Joker VDE M bkpn_clear: WERA 6004JokerVDEM c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020152001 sr_ns: WERA05020152001
r: 08131748 p: 38.347 pid: 173532 b: WERA q: 0 st: lt: 8 ean: 4013288233059 sr: WERA 05020176001 sr_no_br: 05020176001 sr_no_br_cl: 05020176001 sr_cl: WERA05020176001 sr_dash: sold: 38.347 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 13 - 16 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) Outer rectangle Product Range Wera Joker n: WERA 7870 Joker M self-adjusting insert spanner for spanner size 13-16 mm, 9x12 mm - 05020176001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Self-setting insert spanner, for hexagon screw heads and bolts, for torque wrenches from the Click-Torque X and XP series with 9x12 mm mounting. Covers all metric and imperial dimensions in the respective field of application. With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting For hexagon screw heads and bolts with wrench sizes 13.0; 14.0; 15.0; 16.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/2"; 17/32"; 9/16"; 19/32"; 5/8" (imperial) With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts Drive 9x12 mm; for torque wrenches from the Click-Torque X and XP series with 9x12 mm mounting Design Self-setting spanner with ratchet functionality; jaw adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The laser-engraved, abrasion-proof QR code makes it easier to determine the correct torque value depending on the torque wrench and insert tool used. Simply scan with your smartphone or tablet (if available, both QR codes: torque wrench and insert tool). A website opens automatically which recognizes the scanned tools (no app needed!). Then enter the required torque value; the corrected value is determined automatically. No need to use formulas/calculations. For torque wrenches from the Click-Torque X series with 9x12 mm mounting. With its automatically and continuously gripping parallel jaws, the 7870 Joker covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the 7870 Joker offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7870 Joker M Self-setting insert spanner for wrench sizes 13-16 mm, 9x12 mm, 9x12 x 13-16 x 1/2-5/8" x 67.7 mm kts: self-adjusting insert spanner for spanner size 13-16 mm, 9x12 mm kpn: 7870 Joker M kpn_dash: kpn_clear: 7870JokerM bkpn: WERA 7870 Joker M bkpn_clear: WERA 7870JokerM c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-end spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-end spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020176001 sr_ns: WERA05020176001
r: 02828983 p: 38.347 pid: 42732 b: WERA q: 0 st: lt: 8 ean: 4013288184832 sr: WERA 05020080001 sr_no_br: 05020080001 sr_no_br_cl: 05020080001 sr_cl: WERA05020080001 sr_dash: sold: 38.347 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 5/8" Overall length 213 mm Product Range Wera Joker n: WERA 6001 Joker Switch Imperial socket and ratchet spanner, switchable, inch, 5/8" x 213 mm - 05020080001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial, 5/8" x 213 mm kts: socket and ratchet spanner, switchable, inch, 5/8" x 213 mm kpn: 6001 Joker Switch Imperial kpn_dash: kpn_clear: 6001JokerSwitchImperial bkpn: WERA 6001 Joker Switch Imperial bkpn_clear: WERA 6001JokerSwitchImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020080001 sr_ns: WERA05020080001
r: 02828917 p: 18.347 pid: 42554 b: WERA q: 0 st: lt: 15 ean: 4013288167385 sr: WERA 05073283001 sr_no_br: 05073283001 sr_no_br_cl: 05073283001 sr_cl: WERA05073283001 sr_dash: sold: 36.694 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 1/2" Overall length 177 mm Product Range Wera Joker n: WERA 6000 Joker Imperial socket and ring spanner, inch, 1/2" x 177 mm - 05073283001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description High quality, imperial, combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° at the open end prevents any time consuming flipping of the wrench. The ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism - 80 teeth in all - enables flexibility even in very confined working spaces. The specially forged geometry ensures high torque transfer and strength. The ratchet is manufactured out of high performance chrome molybdenum steel with nickel-chrome coating for high corrosion protection. Take it easy Tool Finder with colour coding according to sizes. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, Imperial, 1/2" x 177 mm kts: socket and ring spanner, inch, 1/2" x 177 mm kpn: 6000 Joker Imperial kpn_dash: kpn_clear: 6000JokerImperial bkpn: WERA 6000 Joker Imperial bkpn_clear: WERA 6000JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073283001 sr_ns: WERA05073283001
r: 02828962 p: 34.876 pid: 44497 b: WERA q: 0 st: lt: 8 ean: 4013288184733 sr: WERA 05020071001 sr_no_br: 05020071001 sr_no_br_cl: 05020071001 sr_cl: WERA05020071001 sr_dash: sold: 34.876 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 16 mm Overall length 213 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ratchet spanner, switchable, 16 x 213 mm - 05020071001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 16 x 213 mm kts: socket and ratchet spanner, switchable, 16 x 213 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020071001 sr_ns: WERA05020071001
r: 02828956 p: 34.545 pid: 42574 b: WERA q: 0 st: lt: 8 ean: 4013288184719 sr: WERA 05020069001 sr_no_br: 05020069001 sr_no_br_cl: 05020069001 sr_cl: WERA05020069001 sr_dash: sold: 34.545 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 14 mm Overall length 187 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ring spanner, switchable, 14 x 187 mm - 05020069001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 14 x 187 mm kts: socket and ring spanner, switchable, 14 x 187 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020069001 sr_ns: WERA05020069001
r: 08131754 p: 32.892 pid: 173545 b: WERA q: 3 st: 1 lt: 1 ean: 4013288233332 sr: WERA 05020354001 sr_no_br: 05020354001 sr_no_br_cl: 05020354001 sr_cl: WERA05020354001 sr_dash: sold: 32.892 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 19 mm Overall length 334 mm Product Range Wera Joker n: WERA 6007 Joker Adapter ring spanner SB, long version, 19 x 334 mm - 05020354001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Unique combination of jaw and ring ratchet mechanism in a long design. For hexagon screw heads and bolts. The long lever allows for higher power transmission. The long design also improves accessibility at low-lying couplings. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size and extra laser-engraved size indication. Brilliant combination of jaw end and ratchet mechanism at the ring end in a long design Long lever allows for higher power transmission Better accessibility at low-lying couplings Limit stop prevents any slipping With practical holding function by a metal plate in the mouth Application Hexagon screw heads and bolts Design Ring ratchet spanner, long design Features and benefits Joker 6007 Ratcheting combination wrench. Size matters. The long design of the spanner improves accessibility at low-lying couplings. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Thanks to its end stop, the Joker lowers the risk of the screw head slipping down. In addition, by reducing the risk of slipping, much more force can be applied when screwdriving. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The double hexagon geometry of the jaw end reduces the return angle of the Joker 6007 to 30°. The Joker 6007 has a straight jaw - awkward turning and repositioning is a thing of the past. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder with colour coding by size and extra laser-engraved size indication - for quick and easy identification of the required tool. ds: dsc: Scope of delivery 6007 Joker SB Ring ratchet spanner, long design, 19 x 334 mm kts: Adapter ring spanner SB, long version, 19 x 334 mm kpn: 6007 Joker kpn_dash: kpn_clear: 6007Joker bkpn: WERA 6007 Joker bkpn_clear: WERA 6007Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020354001 sr_ns: WERA05020354001
r: 02828911 p: 15.867 pid: 44469 b: WERA q: 0 st: lt: 15 ean: 4013288167354 sr: WERA 05073280001 sr_no_br: 05073280001 sr_no_br_cl: 05073280001 sr_cl: WERA05073280001 sr_dash: sold: 31.734 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 5/16" Overall length 144 mm Product Range Wera Joker n: WERA 6000 Joker Imperial socket and ring spanner, inch, 5/16" x 144 mm - 05073280001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description High quality, imperial, combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° at the open end prevents any time consuming flipping of the wrench. The ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism - 80 teeth in all - enables flexibility even in very confined working spaces. The specially forged geometry ensures high torque transfer and strength. The ratchet is manufactured out of high performance chrome molybdenum steel with nickel-chrome coating for high corrosion protection. Take it easy Tool Finder with colour coding according to sizes. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, Imperial, 5/16" x 144 mm kts: socket and ring spanner, inch, 5/16" x 144 mm kpn: 6000 Joker Imperial kpn_dash: kpn_clear: 6000JokerImperial bkpn: WERA 6000 Joker Imperial bkpn_clear: WERA 6000JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073280001 sr_ns: WERA05073280001
r: 02828980 p: 30.909 pid: 42283 b: WERA q: 0 st: lt: 8 ean: 4013288184818 sr: WERA 05020078001 sr_no_br: 05020078001 sr_no_br_cl: 05020078001 sr_cl: WERA05020078001 sr_dash: sold: 30.909 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1/2" Overall length 171 mm Product Range Wera Joker n: WERA 6001 Joker Switch Imperial socket and ratchet spanner, switchable, inch, 1/2" x 171 mm - 05020078001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial, 1/2" x 171 mm kts: socket and ratchet spanner, switchable, inch, 1/2" x 171 mm kpn: 6001 Joker Switch Imperial kpn_dash: kpn_clear: 6001JokerSwitchImperial bkpn: WERA 6001 Joker Switch Imperial bkpn_clear: WERA 6001JokerSwitchImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020078001 sr_ns: WERA05020078001
r: 08131753 p: 30.743 pid: 173546 b: WERA q: 3 st: 1 lt: 1 ean: 4013288233356 sr: WERA 05020353001 sr_no_br: 05020353001 sr_no_br_cl: 05020353001 sr_cl: WERA05020353001 sr_dash: sold: 30.743 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 17 mm Overall length 304,5 mm Product Range Wera Joker n: WERA 6007 Joker Adapter ring spanner SB, long design, 17 x 304.5 mm - 05020353001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Unique combination of jaw and ring ratchet mechanism in a long design. For hexagon screw heads and bolts. The long lever allows for higher power transmission. The long design also improves accessibility at low-lying couplings. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size and extra laser-engraved size indication. Brilliant combination of jaw end and ratchet mechanism at the ring end in a long design Long lever allows for higher power transmission Better accessibility at low-lying couplings Limit stop prevents any slipping With practical holding function by a metal plate in the mouth Application Hexagon screw heads and bolts Design Ring ratchet spanner, long design Features and benefits Joker 6007 Ratcheting combination wrench. Size matters. The long design of the spanner improves accessibility at low-lying couplings. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Thanks to its end stop, the Joker lowers the risk of the screw head slipping down. In addition, by reducing the risk of slipping, much more force can be applied when screwdriving. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The double hexagon geometry of the jaw end reduces the return angle of the Joker 6007 to 30°. The Joker 6007 has a straight jaw - awkward turning and repositioning is a thing of the past. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder with colour coding by size and extra laser-engraved size indication - for quick and easy identification of the required tool. ds: dsc: Scope of delivery 6007 Joker SB Ring ratchet spanner, long design, 17 x 304.5 mm kts: Adapter ring spanner SB, long design, 17 x 304.5 mm kpn: 6007 Joker kpn_dash: kpn_clear: 6007Joker bkpn: WERA 6007 Joker bkpn_clear: WERA 6007Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020353001 sr_ns: WERA05020353001
r: 03176952 p: 15.371 pid: 31961 b: WERA q: 0 st: lt: 15 ean: 4013288213037 sr: WERA 05020217001 sr_no_br: 05020217001 sr_no_br_cl: 05020217001 sr_cl: WERA05020217001 sr_dash: sold: 30.742 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 11/16" Length 210 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker Imperial ring spanner inch (11/16" x 210 mm) - 05020217001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, Imperial, 11/16" x 210 mm kts: ring spanner inch (11/16" x 210 mm) kpn: 6003 Joker Imperial kpn_dash: kpn_clear: 6003JokerImperial bkpn: WERA 6003 Joker Imperial bkpn_clear: WERA 6003JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020217001 sr_ns: WERA05020217001
r: 03228380 p: 9.46 pid: 69966 b: WERA q: 0 st: lt: 16 ean: 4013288164476 sr: WERA 05140246001 sr_no_br: 05140246001 sr_no_br_cl: 05140246001 sr_cl: WERA05140246001 sr_dash: sold: 28.38 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Product Range Wera Joker n: WERA 9313 replacement part 6000 Joker, 13.0, 13 mm - 05140246001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Tool kit to exchange the holder board in the Joker 6000 size 13 spanner; including interchangeable holder board. To exchange the 6000 Joker holder board size 13 Included in the delivery are one TORX® TX 7 L-key, one TORX® screw and one holder board Including interchangeable holder board Including the tools needed for the exchange Including interchangeable screws Features and benefits ds: dsc: Scope of delivery 9313 Replacement kit for 6000 Joker wrench, size 13, 13 mm kts: replacement part 6000 Joker, 13.0, 13 mm kpn: 9313 kpn_dash: kpn_clear: 9313 bkpn: WERA 9313 bkpn_clear: WERA 9313 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05140246001 sr_ns: WERA05140246001
r: 03228388 p: 13.719 pid: 70357 b: WERA q: 0 st: lt: 8 ean: 4013288215017 sr: WERA 05136496001 sr_no_br: 05136496001 sr_no_br_cl: 05136496001 sr_cl: WERA05136496001 sr_dash: sold: 27.438 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Accessory/Part type Roll-up pouch For Joker 6003 (11 pieces) Product Range Wera Joker n: WERA 9443 roll case for 6003 Joker 11, empty, 235 x 115 mm - 05136496001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust folding bag for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for 11 Joker 6003 spanners; empty Robust material and low weight ensure optimal transport Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage The pouch can be hung up even while open using the hanging loop Compatible with Wera 2go Features and benefits The material used is distinguished by its high level of robustness. The mesh pouches hold the tools securely and reliably. The size marking can be seen through the mesh material. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9443 Roll pouch 6003 Joker 11, empty, 235 x 115 mm kts: roll case for 6003 Joker 11, empty, 235 x 115 mm kpn: 9443 kpn_dash: kpn_clear: 9443 bkpn: WERA 9443 bkpn_clear: WERA 9443 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05136496001 sr_ns: WERA05136496001
r: 02828975 p: 27.107 pid: 42588 b: WERA q: 0 st: lt: 8 ean: 4013288184788 sr: WERA 05020075001 sr_no_br: 05020075001 sr_no_br_cl: 05020075001 sr_cl: WERA05020075001 sr_dash: sold: 27.107 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 5/16" Overall length 144 mm Product Range Wera Joker n: WERA 6001 Joker Switch Imperial socket and ring spanner, switchable, inch, 5/16" x 144 mm - 05020075001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial, 5/16" x 144 mm kts: socket and ring spanner, switchable, inch, 5/16" x 144 mm kpn: 6001 Joker Switch Imperial kpn_dash: kpn_clear: 6001JokerSwitchImperial bkpn: WERA 6001 Joker Switch Imperial bkpn_clear: WERA 6001JokerSwitchImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020075001 sr_ns: WERA05020075001
r: 02828976 p: 27.107 pid: 42597 b: WERA q: 0 st: lt: 8 ean: 4013288184795 sr: WERA 05020076001 sr_no_br: 05020076001 sr_no_br_cl: 05020076001 sr_cl: WERA05020076001 sr_dash: sold: 27.107 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Width across flats 3/8" Overall length 159 mm Product Range Wera Joker n: WERA 6001 Joker Switch Imperial socket and ratchet spanner, switchable, inch, 3/8" x 159 mm - 05020076001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial, 3/8" x 159 mm kts: socket and ratchet spanner, switchable, inch, 3/8" x 159 mm kpn: 6001 Joker Switch Imperial kpn_dash: kpn_clear: 6001JokerSwitchImperial bkpn: WERA 6001 Joker Switch Imperial bkpn_clear: WERA 6001JokerSwitchImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020076001 sr_ns: WERA05020076001
r: 03176924 p: 11.404 pid: 31957 b: WERA q: 0 st: lt: 15 ean: 4013288213013 sr: WERA 05020215001 sr_no_br: 05020215001 sr_no_br_cl: 05020215001 sr_cl: WERA05020215001 sr_dash: sold: 22.808 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 9/16" Length 167 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker Imperial ring spanner inch (9/16" x 167 mm) - 05020215001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, Imperial, 9/16" x 167 mm kts: ring spanner inch (9/16" x 167 mm) kpn: 6003 Joker Imperial kpn_dash: kpn_clear: 6003JokerImperial bkpn: WERA 6003 Joker Imperial bkpn_clear: WERA 6003JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020215001 sr_ns: WERA05020215001
r: 03228381 p: 9.46 pid: 71613 b: WERA q: 0 st: lt: 16 ean: 4013288164483 sr: WERA 05140247001 sr_no_br: 05140247001 sr_no_br_cl: 05140247001 sr_cl: WERA05140247001 sr_dash: sold: 18.92 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Product Range Wera Joker n: WERA 9317 replacement part 6000 Joker, 17.0, 17 mm - 05140247001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Tool kit to exchange the holder board in the Joker 6000 size 17 spanner; including interchangeable holder board. To exchange the 6000 Joker holder board size 17 Included in the delivery are one TORX® TX 7 L-key, one TORX® screw and one holder board Including interchangeable holder board Including the tools needed for the exchange Including interchangeable screws Features and benefits ds: dsc: Scope of delivery 9317 Replacement kit for 6000 Joker wrench, size 17, 17 mm kts: replacement part 6000 Joker, 17.0, 17 mm kpn: 9317 kpn_dash: kpn_clear: 9317 bkpn: WERA 9317 bkpn_clear: WERA 9317 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05140247001 sr_ns: WERA05140247001
r: 03228379 p: 9.46 pid: 70923 b: WERA q: 0 st: lt: 16 ean: 4013288164469 sr: WERA 05140245001 sr_no_br: 05140245001 sr_no_br_cl: 05140245001 sr_cl: WERA05140245001 sr_dash: sold: 18.92 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Product Range Wera Joker n: WERA 9310 replacement part 6000 Joker, 10.0, 10 mm - 05140245001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Tool kit to exchange the holder board in the Joker 6000 size 10 spanner; including interchangeable holder board. To exchange the 6000 Joker holder board size 10 Included in the delivery are one TORX® TX 7 L-key, one TORX® screw and one holder board Including interchangeable holder board Including the tools needed for the exchange Including interchangeable screws Features and benefits ds: dsc: Scope of delivery 9310 Replacement kit for 6000 Joker wrench, size 10, 10 mm kts: replacement part 6000 Joker, 10.0, 10 mm kpn: 9310 kpn_dash: kpn_clear: 9310 bkpn: WERA 9310 bkpn_clear: WERA 9310 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05140245001 sr_ns: WERA05140245001
r: 03228382 p: 9.46 pid: 70354 b: WERA q: 0 st: lt: 16 ean: 4013288164490 sr: WERA 05140248001 sr_no_br: 05140248001 sr_no_br_cl: 05140248001 sr_cl: WERA05140248001 sr_dash: sold: 18.92 p_range: KLIUM_PRODUCT_RANGE_307 act: 1 avo: 1 av: Product Range Wera Joker n: WERA 9319 replacement part 6000 Joker, 19.0, 19 mm - 05140248001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Tool kit to exchange the holder board in the Joker 6000 size 19 spanner; including interchangeable holder board. To exchange the 6000 Joker holder board size 19 Included in the delivery are one TORX® TX 7 L-key, one TORX® screw and one holder board Including interchangeable holder board Including the tools needed for the exchange Including interchangeable screws Features and benefits ds: dsc: Scope of delivery 9319 Replacement kit for 6000 Joker wrench, size 19, 19 mm kts: replacement part 6000 Joker, 19.0, 19 mm kpn: 9319 kpn_dash: kpn_clear: 9319 bkpn: WERA 9319 bkpn_clear: WERA 9319 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05140248001 sr_ns: WERA05140248001
