r: 03226752 p: 17.19 pid: 70201 b: WERA q: 0 st: lt: 12 ean: 4013288193049 sr: WERA 05004961001 sr_no_br: 05004961001 sr_no_br_cl: 05004961001 sr_cl: WERA05004961001 sr_dash: sold: 34.38 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 17 mm Connection size 3/8" Connection profile Internal square Length 46 mm VDE approved Yes With safety colour code 1000V No Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 B VDE Zyklop cap insulated with 3/8" drive 6 x 46 mm - 05004961001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description 3/8" VDE sockets with increased safety through yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000V for safe working at the approved voltage of 1,000V. Individually tested tools as per IEC 60900 at 10,000 V Increased safety thanks to 2-component insulation with a yellow insulation core under an outer red insulation layer Plastic sleeve protects surfaces from damage Application Hexagon headed bolts, screws and nuts Design Insulated, individually tested as per IEC 60900. Increased safety due to 2-component insulation with yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Features and benefits Zyklop ratchet and accessories for electricians Safe working at voltages up to 1,000 V is guaranteed as Zyklop tools for electricians are individually tested at 10,000 V as per IEC 60900. The Zyklop sockets and extensions for electricians offer increased safety thanks to their 2-component insulation with a yellow insulation core under an outer red insulation layer. ds: dsc: Scope of delivery 8790 B VDE Zyklop 3/8" socket, insulated, 17 x 46 mm kts: Zyklop cap insulated with 3/8" drive 6 x 46 mm kpn: 8790 B VDE kpn_dash: kpn_clear: 8790BVDE bkpn: WERA 8790 B VDE bkpn_clear: WERA 8790BVDE c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004961001 sr_ns: WERA05004961001
r: 03228613 p: 8.595 pid: 71693 b: WERA q: 0 st: lt: 8 ean: 4013288211811 sr: WERA 05136484001 sr_no_br: 05136484001 sr_no_br_cl: 05136484001 sr_cl: WERA05136484001 sr_dash: sold: 34.38 p_range: none type: standard act: 1 avo: 1 av: Accessory/Part type Case For Bicycle Set 4 n: WERA 9433 folding case for Bicycle set 4, empty, 85 x 212 mm - 05136484001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust folding bag for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for Bicycle set 4; empty. Robust material Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage Low weight for easy transport Compatible with Wera 2go Features and benefits The material used is distinguished by its high level of robustness. The robust loops made of broad rubber band hold the tool safe and tight. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9433 Folding pouch Bicycle Set 4, empty, 85 x 212 mm kts: folding case for Bicycle set 4, empty, 85 x 212 mm kpn: 9433 kpn_dash: kpn_clear: 9433 bkpn: WERA 9433 bkpn_clear: WERA 9433 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench sr_no_br_cl_ns: 05136484001 sr_ns: WERA05136484001
r: 02828279 p: 6.87 pid: 42171 b: WERA q: 0 st: lt: 12 ean: 4013288112118 sr: WERA 05073614001 sr_no_br: 05073614001 sr_no_br_cl: 05073614001 sr_cl: WERA05073614001 sr_dash: sold: 34.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Number per blister 1 n: WERA 3855/1 TS SB SiS bit Pozidriv, stainless steel, PZ 2 x 25 mm - 05073614001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for Pozidriv screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3855/1 TS SB bits, stainless, PZ 2 x 25 mm kts: bit Pozidriv, stainless steel, PZ 2 x 25 mm kpn: 3855/1 TS SB SiS kpn_dash: kpn_clear: 38551TSSBSiS bkpn: WERA 3855/1 TS SB SiS bkpn_clear: WERA 38551TSSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073614001 sr_ns: WERA05073614001
r: 02828278 p: 6.87 pid: 42633 b: WERA q: 0 st: lt: 12 ean: 4013288112101 sr: WERA 05073613001 sr_no_br: 05073613001 sr_no_br_cl: 05073613001 sr_cl: WERA05073613001 sr_dash: sold: 34.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 Number per blister 1 n: WERA 3855/1 TS SB SiS bit Pozidriv, stainless steel, PZ 1 x 25 mm - 05073613001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for Pozidriv screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3855/1 TS SB bits, stainless, PZ 1 x 25 mm kts: bit Pozidriv, stainless steel, PZ 1 x 25 mm kpn: 3855/1 TS SB SiS kpn_dash: kpn_clear: 38551TSSBSiS bkpn: WERA 3855/1 TS SB SiS bkpn_clear: WERA 38551TSSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073613001 sr_ns: WERA05073613001
r: 02828265 p: 6.87 pid: 42159 b: WERA q: 0 st: lt: 12 ean: 4013288112149 sr: WERA 05073611001 sr_no_br: 05073611001 sr_no_br_cl: 05073611001 sr_cl: WERA05073611001 sr_dash: sold: 34.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 Number per blister 1 n: WERA 3851/1 TS SB SiS bit Phillips, stainless steel, PH 2 x 25 mm - 05073611001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for cross-recess screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3851/1 TS SB bits, stainless, PH 2 x 25 mm kts: bit Phillips, stainless steel, PH 2 x 25 mm kpn: 3851/1 TS SB SiS kpn_dash: kpn_clear: 38511TSSBSiS bkpn: WERA 3851/1 TS SB SiS bkpn_clear: WERA 38511TSSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073611001 sr_ns: WERA05073611001
r: 02832101 p: 11.45 pid: 4468 b: WERA q: 0 st: lt: 13 ean: 4013288101068 sr: WERA 05060412001 sr_no_br: 05060412001 sr_no_br_cl: 05060412001 sr_cl: WERA05060412001 sr_dash: sold: 34.35 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 7/16" Type of drive profile (socket) Hexagonal Shank type External hexagon Length 50 mm n: WERA 869/4 cap bit 7/16" x 50 mm - 05060412001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Imperial nutsetter for hexagon head screws. Non-magnetic design. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Imperial Non-magnetic design 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Non-magnetic Features and benefits Non-magnetic nutsetters that do not attract metal filings. ds: dsc: Scope of delivery 869/4 Nutsetters, 7/16" x 50 mm kts: cap bit 7/16" x 50 mm kpn: 869/4 kpn_dash: kpn_clear: 8694 bkpn: WERA 869/4 bkpn_clear: WERA 8694 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060412001 sr_ns: WERA05060412001
r: 03227259 p: 6.85 pid: 70214 b: WERA q: 0 st: lt: 8 ean: 4013288206862 sr: WERA 05003499001 sr_no_br: 05003499001 sr_no_br_cl: 05003499001 sr_cl: WERA05003499001 sr_dash: sold: 34.25 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 15 mm Connection size 1/4" Connection profile Internal square Length 23 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 HMA Zyklop hand and machine cap with 1/4" drive 15 x 23 mm - 05003499001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description The Wera manual and machine socket (ISO 2725 part 3) can be used in manual and machine operations. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon screws and bolts. Made of matte chrome-plated chrome-vanadium. 1/4" Zyklop socket For manual and power tool operations (non-impact) Knurling at lower end to enable easy gripping when used in manual applications Equipped with ball stop groove With Take it easy tool finder: colour coding by size Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, chrome vanadium, brushed chrome-plated finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits Nutsetter for hexagon head screws Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8790 HMA Zyklop 1/4" socket, 15 x 23 mm kts: Zyklop hand and machine cap with 1/4" drive 15 x 23 mm kpn: 8790 HMA kpn_dash: kpn_clear: 8790HMA bkpn: WERA 8790 HMA bkpn_clear: WERA 8790HMA c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003499001 sr_ns: WERA05003499001
r: 02835254 p: 11.404 pid: 42053 b: WERA q: 0 st: lt: 11 ean: 4013288181190 sr: WERA 05030083001 sr_no_br: 05030083001 sr_no_br_cl: 05030083001 sr_cl: WERA05030083001 sr_dash: sold: 34.212 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Microstix 0 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Microstix Product Range Wera Kraftform n: WERA 1572 ESD Microstix Kraftform Micro screwdriver, 0 x 40 mm - 05030083001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe screwdriver for Microstix® screws. Dependable protection against electrostatic energy and associated damage. Comes with an ergonomic Kraftform Micro handle for pleasant and low-fatigue working and Black Point tip for high corrosion protection. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Screwdriver for Microstix® screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Ergonomic Kraftform handle for pleasant and low-fatigue working The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Microstix® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (orange = Microstix®) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1572 ESD Kraftform Micro screwdriver for Microstix® screws, 0 x 40 mm kts: Microstix Kraftform Micro screwdriver, 0 x 40 mm kpn: 1572 ESD kpn_dash: kpn_clear: 1572ESD bkpn: WERA 1572 ESD bkpn_clear: WERA 1572ESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030083001 sr_ns: WERA05030083001
r: 03227731 p: 6.776 pid: 69891 b: WERA q: 0 st: lt: 12 ean: 4013288210494 sr: WERA 05004541001 sr_no_br: 05004541001 sr_no_br_cl: 05004541001 sr_cl: WERA05004541001 sr_dash: sold: 33.88 p_range: none type: standard act: 1 avo: 1 av: Socket size 19 mm Connection size 3/8" Connection profile Internal square Length 64 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal n: WERA 8790 HMB Deep hand and machine cap with 3/8" drive 19 x 64 mm - 05004541001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description The Wera manual and machine socket (ISO 2725 part 3) can be used in manual and machine operations. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon screws and bolts. Made of matte chrome-plated chrome-vanadium. Long sockets for low-lying screwdriving, often even with protruding threaded rods in small spaces Hexagonal profile enables precise bolting with high power transmission and preserves the profile With Take it easy tool finder: colour coding by size Knurling at lower end to enable easy gripping when used in manual applications For manual and machine operation (non-impact), ball intercept ring Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, long design for low-lying screwdriving and protruding threaded rods; with hexagonal profile; knurls at base for precision handling in manual operations, chrome vanadium, matt chrome-plated finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Knurling on lower end for more grip when used manually. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 HMB Deep 3/8" socket, 19 x 64 mm kts: hand and machine cap with 3/8" drive 19 x 64 mm kpn: 8790 HMB Deep kpn_dash: kpn_clear: 8790HMBDeep bkpn: WERA 8790 HMB Deep bkpn_clear: WERA 8790HMBDeep c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket sr_no_br_cl_ns: 05004541001 sr_ns: WERA05004541001
r: 02835711 p: 6.776 pid: 42131 b: WERA q: 0 st: lt: 8 ean: 4013288032362 sr: WERA 05118122001 sr_no_br: 05118122001 sr_no_br_cl: 05118122001 sr_cl: WERA05118122001 sr_dash: sold: 33.88 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 4,5 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 4.5 x 60 mm - 05118122001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 4.5 x 60 mm kts: kraftform micro cap screwdriver 4.5 x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118122001 sr_ns: WERA05118122001
r: 41071073 p: 6.776 pid: 71777 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017734 sr: WERA 05017005001 sr_no_br: 05017005001 sr_no_br_cl: 05017005001 sr_cl: WERA05017005001 sr_dash: sold: 33.88 p_range: none type: standard act: 1 avo: 1 av: Drive size PH1 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 1 x 80 mm - 05017005001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 1 x 80 mm kts: Phillips screwdriver, PH 1 x 80 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017005001 sr_ns: WERA05017005001
r: 02814975 p: 33.842 pid: 18987 b: WERA q: 0 st: lt: 12 ean: 4013288111494 sr: WERA 05071110001 sr_no_br: 05071110001 sr_no_br_cl: 05071110001 sr_cl: WERA05071110001 sr_dash: sold: 33.842 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Stainless 1 screwdriver bit set 10-piece - 05071110001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bit-Check that can be positioned upright with high quality bits out of stainless steel. Wera stainless tools are manufactured out of stainless steel, thus preventing the formation of unsightly extraneous rust. 9 Wera stainless bits. 1 stainless Rapidaptor quick-release holder. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable, multi-component Bit-Check Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Rapidaptor technology for rapid bit change Industrial applications possible without any constraints 1 Rapidaptor stainless steel bit holder with quick-release chuck, 9 stainless steel bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits No chance for extraneous rust with stainless steel The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Manufactured out of stainless steel thus preventing the formation of unsightly extraneous rust when working with stainless steel. Additionally, it offers all the advantages of the Rapidaptor technology. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. ds: dsc: Scope of delivery Bit-Check 10 Stainless 1, 10 pieces 1x 3888/4/1 K Rapidaptor Universal Bit Holder, stainless: 1/4" x 50 mm 1x 3851/1 TS bits, stainless: PH 2 x 25 mm 3x 3855/1 TS bits, stainless: PZ 1x25 mm, 2x PZ 2x25 mm 5x 3867/1 TS TORX® bits, stainless: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Stainless 1 kpn_dash: Bit kpn_clear: BitCheck10Stainless1 bkpn: WERA Bit-Check 10 Stainless 1 bkpn_clear: WERA BitCheck10Stainless1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05071110001 sr_ns: WERA05071110001
r: 02814977 p: 33.719 pid: 18996 b: WERA q: 0 st: lt: 12 ean: 4013288112163 sr: WERA 05073630001 sr_no_br: 05073630001 sr_no_br_cl: 05073630001 sr_cl: WERA05073630001 sr_dash: sold: 33.719 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Stainless 1 SB screwdriver bit set 10-piece - 05073630001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bit-Check that can be positioned upright with high quality bits out of stainless steel. Wera stainless tools are manufactured out of stainless steel, thus preventing the formation of unsightly extraneous rust. 9 Wera stainless bits. 1 stainless Rapidaptor quick-release holder. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable, multi-component Bit-Check Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Rapidaptor technology for rapid bit change Industrial applications possible without any constraints 1 Rapidaptor stainless steel bit holder with quick-release chuck, 9 stainless steel bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits No chance for extraneous rust with stainless steel The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Manufactured out of stainless steel thus preventing the formation of unsightly extraneous rust when working with stainless steel. Additionally, it offers all the advantages of the Rapidaptor technology. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. ds: dsc: Scope of delivery Bit-Check 10 Stainless 1 SB, 10 pieces 1x 3888/4/1 K Rapidaptor Universal Bit Holder, stainless: 1/4" x 50 mm 1x 3851/1 TS bits, stainless: PH 2 x 25 mm 3x 3855/1 TS bits, stainless: PZ 1x25 mm, 2x PZ 2x25 mm 5x 3867/1 TS TORX® bits, stainless: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Stainless 1 SB kpn_dash: Bit kpn_clear: BitCheck10Stainless1SB bkpn: WERA Bit-Check 10 Stainless 1 SB bkpn_clear: WERA BitCheck10Stainless1SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073630001 sr_ns: WERA05073630001
r: 02814889 p: 11.239 pid: 17196 b: WERA q: 0 st: lt: 12 ean: 4013288155276 sr: WERA 05073635001 sr_no_br: 05073635001 sr_no_br_cl: 05073635001 sr_cl: WERA05073635001 sr_dash: sold: 33.717 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Slotted ESD No VDE approved No Quantity per set 6 Product Range Wera Bit-Check n: WERA Bit-Check 6 Universal 1 SB screwdriver bit set 6-piece - 05073635001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 6 Wera bits in a length of 50 mm tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. Torsion bits (TZ) additionally take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. Upright positionable Bit-Checks convince due to their functionality in a minimum of space Torsion design against premature wear Tough viscous bits for universal use 6 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery Bit-Check 6 Universal 1 SB, 6 pieces 2x 851/4 TZ bits: PH 1x50 mm, PH 2x50 mm 2x 855/4 TZ bits: PZ 1x50 mm, PZ 2x50 mm 2x 800/4 Z bits: 1x5.5x50 mm, 1.2x6.5x50 mm kts: screwdriver bit set 6-piece kpn: Bit-Check 6 Universal 1 SB kpn_dash: Bit kpn_clear: BitCheck6Universal1SB bkpn: WERA Bit-Check 6 Universal 1 SB bkpn_clear: WERA BitCheck6Universal1SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073635001 sr_ns: WERA05073635001
r: 02295227 p: 8.429 pid: 44234 b: WERA q: 0 st: lt: 14 ean: 4013288115577 sr: WERA 05071092001 sr_no_br: 05071092001 sr_no_br_cl: 05071092001 sr_cl: WERA05071092001 sr_dash: sold: 33.716 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT25 n: WERA 3867/4 TORX BO bit with bore, stainless steel, TX 25 x 89 mm - 05071092001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Stainless steel for minimising rust Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. ds: dsc: Scope of delivery 3867/4 TORX® BO bits with bore hole, stainless, TX 25 x 89 mm kts: bit with bore, stainless steel, TX 25 x 89 mm kpn: 3867/4 TORX BO kpn_dash: kpn_clear: 38674TORXBO bkpn: WERA 3867/4 TORX BO bkpn_clear: WERA 38674TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071092001 sr_ns: WERA05071092001
r: 08103712 p: 8.429 pid: 71305 b: WERA q: 0 st: lt: 8 ean: 4013288227058 sr: WERA 05003050001 sr_no_br: 05003050001 sr_no_br_cl: 05003050001 sr_cl: WERA05003050001 sr_dash: sold: 33.716 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 107 mm Blade thickness Connection size 3/8" VDE approved No With safety colour code 1000V Bit tip HEX 4 mm Drive profile size (bit) 4 mm Product Range Wera Zyklop n: WERA 8740 B Zyklop bit cap with 3/8" drive with extra-slim profile area 4 x 107 mm - 05003050001 cn: BIT SOCKET cn2: BIT SOCKET cn_clear: BITSOCKET d: Product description Bit socket (non-impact) for manual or machine tool operations With extra slim 30 mm long profile area With Take it easy tool finder: colour coding by size Knurling on lower end for more grip when used manually. Chrome vanadium steel, matte chrome-plated Application Hexagonal socket screws Design For manual and machine-operated tools (non-impact), with ball stop groove, knurling at the rear end for manageability during manual use; bit sockets with the advantages of the Wera bit technology; matte-chromed; with 30mm long and extra slim profile area for better accessibility in tight workspaces. Take it easy tool finder: With colour coding by size as well as size stamping - to help you find the required bit socket quickly and easily. Features and benefits The bit sockets have a 30 mm long and extra slim profile area. This makes even couplings in tight work spaces easily accessible. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8740 B Zyklop Bit socket with 3/8" drive, with extra slim profile area, 4 x 107 mm kts: bit cap with 3/8" drive with extra-slim profile area 4 x 107 mm kpn: 8740 B Zyklop kpn_dash: kpn_clear: 8740BZyklop bkpn: WERA 8740 B Zyklop bkpn_clear: WERA 8740BZyklop c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Bit socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera bit socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003050001 sr_ns: WERA05003050001
r: 02307157 p: 5.619 pid: 44484 b: WERA q: 0 st: lt: 11 ean: 4013288106650 sr: WERA 05028049001 sr_no_br: 05028049001 sr_no_br_cl: 05028049001 sr_cl: WERA05028049001 sr_dash: sold: 33.714 p_range: none type: standard act: 1 avo: 1 av: Drive size T9 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 9 x 60 mm - 05028049001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 9 x 60 mm kts: screwdriver with holding function, TX 9 x 60 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028049001 sr_ns: WERA05028049001
r: 87010085 p: 2.79 pid: 70716 b: WERA q: 12 st: 1 lt: 1 ean: 4013288015815 sr: WERA 05066320001 sr_no_br: 05066320001 sr_no_br_cl: 05066320001 sr_cl: WERA05066320001 sr_dash: sold: 33.48 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T40 n: WERA 867/1 TZ TORX bit, TX 40 x 25 mm - 05066320001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 40 x 25 mm kts: bit, TX 40 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066320001 sr_ns: WERA05066320001
r: 02828655 p: 11.15 pid: 42198 b: WERA q: 0 st: lt: 15 ean: 4013288155986 sr: WERA 05059701001 sr_no_br: 05059701001 sr_no_br_cl: 05059701001 sr_cl: WERA05059701001 sr_dash: sold: 33.45 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Ball-end Torx Connection size (bit) 1/4" VDE approved No Bit tip T15 n: WERA 867/4 KK TORX bit, TX 15 x 89 mm - 05059701001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Ballpoint: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws TORX® ballpoint for work in difficult installation situations Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Ball-end, tough, for universal use Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 KK TORX® bits, TX 15 x 89 mm kts: bit, TX 15 x 89 mm kpn: 867/4 KK TORX kpn_dash: kpn_clear: 8674KKTORX bkpn: WERA 867/4 KK TORX bkpn_clear: WERA 8674KKTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059701001 sr_ns: WERA05059701001
r: 02800024 p: 6.69 pid: 46000 b: WERA q: 0 st: lt: 9 ean: 4013288156211 sr: WERA 05380201001 sr_no_br: 05380201001 sr_no_br_cl: 05380201001 sr_cl: WERA05380201001 sr_dash: sold: 33.45 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved No Bit tip PH0 Drive profile size (bit) 0 n: WERA 851/4 J bit Phillips, PH 0 x 89 mm - 05380201001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits, optimised for Asian PH screws. In particular, for applications with very small dimensions pursuant to the Japanese Camera Industrial Standard. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/4 J bits, PH 0 x 89 mm kts: bit Phillips, PH 0 x 89 mm kpn: 851/4 J kpn_dash: kpn_clear: 8514J bkpn: WERA 851/4 J bkpn_clear: WERA 8514J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380201001 sr_ns: WERA05380201001
