r: 41071192 p: 7.603 pid: 71189 b: WERA q: 3 st: 1 lt: 1 ean: 4013288108067 sr: WERA 05007673001 sr_no_br: 05007673001 sr_no_br_cl: 05007673001 sr_cl: WERA05007673001 sr_dash: sold: 38.015 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Blade length 100 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 1 x 5.5 x 100 mm - 05007673001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 1 x 5.5 x 100 mm kts: saw blade screwdriver, hexagonal key blade, 1 x 5.5 x 100 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007673001 sr_ns: WERA05007673001
r: 03177083 p: 7.603 pid: 31408 b: WERA q: 0 st: lt: 10 ean: 4013288202475 sr: WERA 05073057001 sr_no_br: 05073057001 sr_no_br_cl: 05073057001 sr_cl: WERA05073057001 sr_dash: sold: 38.015 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2,5 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 2,5 mm n: WERA 840/4 Z SB bit, 2.5 x 50 mm (2 pcs) - 05073057001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 2.5 x 50 mm, 2 pieces 2x 840/4 Z bits: 2.5 x 50 mm kts: bit, 2.5 x 50 mm (2 pcs) kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073057001 sr_ns: WERA05073057001
r: 87990629 p: 7.603 pid: 75481 b: WERA q: 0 st: lt: 12 ean: 4013288017239 sr: WERA 05052575001 sr_no_br: 05052575001 sr_no_br_cl: 05052575001 sr_cl: WERA05052575001 sr_dash: sold: 38.015 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic No Length 57 mm n: WERA 890/4/1 universal bit holder, 1/4" x 57 mm - 05052575001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. The retaining ring ensures an optimum fit of the tool in the holder. 1/4" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive The retaining ring ensures a secure fit of the tool in the holder 1/4" hexagon drive (Wera connecting series 1) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With retaining ring Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits Proven holder design, optimal fitting of the tool in the holder. Particularly robust for series applications. ds: dsc: Scope of delivery 890/4/1 Universal Bit Holder, 1/4" x 57 mm kts: universal bit holder, 1/4" x 57 mm kpn: 890/4/1 kpn_dash: kpn_clear: 89041 bkpn: WERA 890/4/1 bkpn_clear: WERA 89041 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05052575001 sr_ns: WERA05052575001
r: 02815518 p: 3.8 pid: 41661 b: WERA q: 0 st: lt: 8 ean: 4013288010971 sr: WERA 05072065001 sr_no_br: 05072065001 sr_no_br_cl: 05072065001 sr_cl: WERA05072065001 sr_dash: sold: 38 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 1,6 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 8 mm Drive profile size (bit) 8 mm n: WERA 800/1 Z slotted screw bit, 1.6 x 8 x 25 mm - 05072065001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for slotted screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 Z bits, 1.6 x 8 x 25 mm kts: slotted screw bit, 1.6 x 8 x 25 mm kpn: 800/1 Z kpn_dash: kpn_clear: 8001Z bkpn: WERA 800/1 Z bkpn_clear: WERA 8001Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072065001 sr_ns: WERA05072065001
r: 41071095 p: 37.975 pid: 71788 b: WERA q: 0 st: lt: 15 ean: 4013288093332 sr: WERA 05027931001 sr_no_br: 05027931001 sr_no_br_cl: 05027931001 sr_cl: WERA05027931001 sr_dash: sold: 37.975 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Drive size T7 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,9 Nm Max. tightening torque 0,9 Nm n: WERA 300 TX torque indicator TORX, TX 7 x 0.9 Nm - 05027931001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 7 x 0.9 Nm kts: torque indicator TORX, TX 7 x 0.9 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027931001 sr_ns: WERA05027931001
r: 02069529 p: 37.851 pid: 42834 b: WERA q: 0 st: lt: 10 ean: 4013288096449 sr: WERA 05027912001 sr_no_br: 05027912001 sr_no_br_cl: 05027912001 sr_cl: WERA05027912001 sr_dash: sold: 37.851 p_range: none type: standard act: 1 avo: 1 av: Drive size HEX 3 mm Blade length 65 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon n: WERA 300 Hex torque indicator, 3 x 3.0 Nm - 05027912001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for hexagon socket screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Comes with Hex-Plus profile which avoids any rounding of the screw head. The Black Point tip offers high corrosion protection and an exact fit. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application Hexagon socket screws Pre-set torque 1.4 Nm-3.0 Nm (1.0 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Hex-Plus, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 Hex Torque-indicator, 3 mm x 3.0 Nm kts: torque indicator, 3 x 3.0 Nm kpn: 300 Hex kpn_dash: kpn_clear: 300Hex bkpn: WERA 300 Hex bkpn_clear: WERA 300Hex c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05027912001 sr_ns: WERA05027912001
r: 02814983 p: 18.842 pid: 17612 b: WERA q: 1 st: 1 lt: 1 ean: 4013288128164 sr: WERA 05073416001 sr_no_br: 05073416001 sr_no_br_cl: 05073416001 sr_cl: WERA05073416001 sr_dash: sold: 37.684 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Universal 5 SB screwdriver bit set 10-piece - 05073416001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with stainless sleeve, retaining ring and strong permanent magnet for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Comes with Torsion bits to combat premature wear; tough viscous for universal use. Upright positionable, multi-component Bit-Check Torsion design against premature wear Includes universal holder for the take-up of bits with 1/4" hex head drive Tough viscous bits for universal use Holder with strong permanent magnet that holds bits absolutely securely 1 Universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 9 bits, tough, for universal use. Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery Bit-Check 10 Universal 5 SB, 10 pieces 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 1x 851/1 Z bits: PH 2 x 25 mm 3x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 5x 867/1 TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Universal 5 SB kpn_dash: Bit kpn_clear: BitCheck10Universal5SB bkpn: WERA Bit-Check 10 Universal 5 SB bkpn_clear: WERA BitCheck10Universal5SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073416001 sr_ns: WERA05073416001
r: 02835233 p: 9.421 pid: 43666 b: WERA q: 0 st: lt: 12 ean: 4013288184092 sr: WERA 05030415001 sr_no_br: 05030415001 sr_no_br_cl: 05030415001 sr_cl: WERA05030415001 sr_dash: sold: 37.684 p_range: none type: standard act: 1 avo: 1 av: Width across flats 3,2 mm With safety colour code 1000V ESD Yes Handle type Screwdriver handle Overall length 157 mm Blade length 60 mm VDE approved No n: WERA 1569 ESD cap screwdriver 3.2 x 60 mm - 05030415001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for hexagon head screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Kraftform Micro handle with rotating cap for rapid spinning Take it easy tool finder: colour coding according to profile and size Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1569 ESD Nutdriver Kraftform Micro, 3.2 x 60 mm kts: ESD cap screwdriver 3.2 x 60 mm kpn: 1569 kpn_dash: kpn_clear: 1569 bkpn: WERA 1569 bkpn_clear: WERA 1569 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05030415001 sr_ns: WERA05030415001
r: 02828384 p: 6.28 pid: 42877 b: WERA q: 0 st: lt: 12 ean: 4013288115607 sr: WERA 05071098001 sr_no_br: 05071098001 sr_no_br_cl: 05071098001 sr_cl: WERA05071098001 sr_dash: sold: 37.68 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 2 n: WERA 3868/4 Square-Plus inside square bit, stainless steel, 2 x 89 mm - 05071098001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for square socket screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Suitable for square head socket screws 1/4" hexagon drive (Wera connecting series 4) Application Square socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Stainless steel for minimising rust Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. ds: dsc: Scope of delivery 3868/4 Square-Plus bits, stainless, # 2 x 89 mm kts: inside square bit, stainless steel, # 2 x 89 mm kpn: 3868/4 Square-Plus kpn_dash: 3868/4 Square kpn_clear: 38684SquarePlus bkpn: WERA 3868/4 Square-Plus bkpn_clear: WERA 38684SquarePlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071098001 sr_ns: WERA05071098001
r: 02835707 p: 6.28 pid: 43734 b: WERA q: 0 st: lt: 8 ean: 4013288032348 sr: WERA 05118118001 sr_no_br: 05118118001 sr_no_br_cl: 05118118001 sr_cl: WERA05118118001 sr_dash: sold: 37.68 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 3,5 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 3.5 x 60 mm - 05118118001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 3.5 x 60 mm kts: kraftform micro cap screwdriver 3.5 x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118118001 sr_ns: WERA05118118001
r: 02815499 p: 3.76 pid: 44833 b: WERA q: 0 st: lt: 12 ean: 4013288034427 sr: WERA 05056064001 sr_no_br: 05056064001 sr_no_br_cl: 05056064001 sr_cl: WERA05056064001 sr_dash: sold: 37.6 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 5,5 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm n: WERA 800/1 BTZ slotted screw bit, 0.8 x 5.5 x 25 mm - 05056064001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For slotted screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (yellow = slotted) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 800/1 BTZ bits, 0.8 x 5.5 x 25 mm kts: slotted screw bit, 0.8 x 5.5 x 25 mm kpn: 800/1 BTZ kpn_dash: kpn_clear: 8001BTZ bkpn: WERA 800/1 BTZ bkpn_clear: WERA 8001BTZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056064001 sr_ns: WERA05056064001
r: 87010235 p: 0.94 pid: 71534 b: WERA q: 0 st: lt: 12 ean: 4013288013477 sr: WERA 05072074001 sr_no_br: 05072074001 sr_no_br_cl: 05072074001 sr_cl: WERA05072074001 sr_dash: sold: 37.6 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/1 Z PH bit Phillips, PH 3 x 25 mm - 05072074001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z bits, PH 3 x 25 mm kts: bit Phillips, PH 3 x 25 mm kpn: 851/1 Z PH kpn_dash: kpn_clear: 8511ZPH bkpn: WERA 851/1 Z PH bkpn_clear: WERA 8511ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072074001 sr_ns: WERA05072074001
r: 02832934 p: 9.28 pid: 41837 b: WERA q: 0 st: lt: 12 ean: 4013288018847 sr: WERA 05022064001 sr_no_br: 05022064001 sr_no_br_cl: 05022064001 sr_cl: WERA05022064001 sr_dash: sold: 37.12 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm Non-sparking No Overall length 200 mm Blade length 200 mm Surface treatment Chrome plated Short arm length 36 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 950 PKL socket spanner metric chrome plated 8 x 200 mm - 05022064001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm High corrosion protection thanks to chrome-plating Metric Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL L-key, metric, chrome-plated, 8 x 200 mm kts: socket spanner metric chrome plated 8 x 200 mm kpn: 950 PKL kpn_dash: kpn_clear: 950PKL bkpn: WERA 950 PKL bkpn_clear: WERA 950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022064001 sr_ns: WERA05022064001
r: 41071346 p: 9.26 pid: 71314 b: WERA q: 0 st: lt: 12 ean: 4013288120328 sr: WERA 05003552001 sr_no_br: 05003552001 sr_no_br_cl: 05003552001 sr_cl: WERA05003552001 sr_dash: sold: 37.04 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 7 mm Connection size 3/8" Connection profile Internal square Length 29 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 HMB Zyklop hand and machine cap with 3/8" drive 7 x 29 mm - 05003552001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description The Wera manual and machine socket (ISO 2725 part 3) can be used in manual and machine operations. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon screws and bolts. Made of matte chrome-plated chrome-vanadium. 3/8" Zyklop socket For manual and power tool operations (non-impact) Knurling at lower end to enable easy gripping when used in manual applications Equipped with ball stop groove With Take it easy tool finder: colour coding by size Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, chrome vanadium, brushed chrome-plated finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8790 HMB Zyklop socket with 3/8" drive, 7 x 29 mm kts: Zyklop hand and machine cap with 3/8" drive 7 x 29 mm kpn: 8790 HMB kpn_dash: kpn_clear: 8790HMB bkpn: WERA 8790 HMB bkpn_clear: WERA 8790HMB c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003552001 sr_ns: WERA05003552001
r: 41071345 p: 9.26 pid: 71309 b: WERA q: 0 st: lt: 12 ean: 4013288120311 sr: WERA 05003551001 sr_no_br: 05003551001 sr_no_br_cl: 05003551001 sr_cl: WERA05003551001 sr_dash: sold: 37.04 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 6 mm Connection size 3/8" Connection profile Internal square Length 29 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 HMB Zyklop hand and machine cap with 3/8" drive 6 x 29 mm - 05003551001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description The Wera manual and machine socket (ISO 2725 part 3) can be used in manual and machine operations. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon screws and bolts. Made of matte chrome-plated chrome-vanadium. 3/8" Zyklop socket For manual and power tool operations (non-impact) Knurling at lower end to enable easy gripping when used in manual applications Equipped with ball stop groove With Take it easy tool finder: colour coding by size Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, chrome vanadium, brushed chrome-plated finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8790 HMB Zyklop socket with 3/8" drive, 6 x 29 mm kts: Zyklop hand and machine cap with 3/8" drive 6 x 29 mm kpn: 8790 HMB kpn_dash: kpn_clear: 8790HMB bkpn: WERA 8790 HMB bkpn_clear: WERA 8790HMB c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003551001 sr_ns: WERA05003551001
r: 41071366 p: 9.26 pid: 71964 b: WERA q: 0 st: lt: 12 ean: 4013288120526 sr: WERA 05003572001 sr_no_br: 05003572001 sr_no_br_cl: 05003572001 sr_cl: WERA05003572001 sr_dash: sold: 37.04 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 3/8" Connection size 3/8" Connection profile Internal square Length 29 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 HMB Zyklop hand and machine cap with 3/8" drive 3/8" x 29 mm - 05003572001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description The Wera manual and machine socket (ISO 2725 part 3) can be used in manual and machine operations. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. Slip-proof for easy grip even with oily hands. With ball stop groove. For external hexagon screws and bolts. Made of matte chrome-plated chrome-vanadium. 3/8" Zyklop socket For manual and power tool operations (non-impact) Knurling at lower end to enable easy gripping when used in manual applications Equipped with ball stop groove With Take it easy tool finder: colour coding by size Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, chrome vanadium, brushed chrome-plated finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8790 HMB Zyklop socket with 3/8" drive, 3/8" x 29 mm kts: Zyklop hand and machine cap with 3/8" drive 3/8" x 29 mm kpn: 8790 HMB kpn_dash: kpn_clear: 8790HMB bkpn: WERA 8790 HMB bkpn_clear: WERA 8790HMB c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003572001 sr_ns: WERA05003572001
r: 03226529 p: 37.024 pid: 70191 b: WERA q: 0 st: lt: 12 ean: 4013288194787 sr: WERA 05030180001 sr_no_br: 05030180001 sr_no_br_cl: 05030180001 sr_cl: WERA05030180001 sr_dash: sold: 37.024 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 n: WERA 1550/6 ESD Elektronica screwdriver set in holder 6-piece - 05030180001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description ESD-safe Wera Micro screwdriver set. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. ESD-safe tool thanks to surface resistance of<= 10 9 Ohm The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip offers an exact fit and optimum corrosion protection Multi-component Kraftform Micro handles for fast and ergonomic screwdriving Includes practical rack for tidy storage of the screwdrivers Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips, TORX PLUS® IPR and Microstix® screws Content 6-piece set and rack in display carton Features and benefits When doing screwdriving jobs on electronic components (like e.g. smartphones and tablet PCs), there should be no electrostatic discharge as this could cause malfunctions and a complete failure. Therefore, tools that are secure against electrostatic discharge are indispensable. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1550/6 ESD Screwdriver set and rack for electronic applications, 6 pieces 3x 1550 PH ESD Kraftform Micro screwdriver for Phillips screws: PH 000x40 mm, PH 00x40 mm, PH 0x40 mm 1x 1578 A ESD Kraftform Micro screwdriver for slotted screws: 0.35 x 2.5 x 40 mm 1x 1567 IPR TORX PLUS® ESD Kraftform Micro screwdriver: 1 IPR x 40 mm 1x 1572 ESD Kraftform Micro screwdriver for Microstix® screws: m x 40 mm kts: screwdriver set in holder 6-piece kpn: 1550/6 ESD Elektronica kpn_dash: kpn_clear: 15506ESDElektronica bkpn: WERA 1550/6 ESD Elektronica bkpn_clear: WERA 15506ESDElektronica c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05030180001 sr_ns: WERA05030180001
r: 02833892 p: 9.256 pid: 41934 b: WERA q: 0 st: lt: 12 ean: 4013288172747 sr: WERA 05024357001 sr_no_br: 05024357001 sr_no_br_cl: 05024357001 sr_cl: WERA05024357001 sr_dash: sold: 37.024 p_range: none type: standard act: 1 avo: 1 av: Drive size TT30 With handle No Handle type Overall length 122 mm Width 24 mm Drive (pin key) Torx Tamper Resistant n: WERA 967 SPKL TORX BO Multicolour open-end spanner, TX 30 x 122 mm - 05024357001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description Wera L-keys with finger-protecting plastic sleeves. This means they are ergonomic and pleasant to grip even in cold temperatures. At one end a TORX® BO profile: the bore hole in the bit and safety pin in the TORX® BO screw prevents any unauthorised loosening. Tamperproof fastening! The ballpoint on the long arm allows dependable working on TORX® screws even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-key for TORX® socket screws with safety pin TORX® ballpoint on the long arm Colour coded, easy-to-grip plastic sleeve, even at low temperatures Wear-resistant size marking BlackLaser for high corrosion protection and long service life Application TORX® socket screws with and without pin (BO = bore hole) Design BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball end on long arm Features and benefits L-key for TORX® socket screws with safety pin L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SPKL TORX® BO L-key Multicolour, TX 30 x 122 mm kts: open-end spanner, TX 30 x 122 mm kpn: 967 SPKL TORX BO Multicolour kpn_dash: kpn_clear: 967SPKLTORXBOMulticolour bkpn: WERA 967 SPKL TORX BO Multicolour bkpn_clear: WERA 967SPKLTORXBOMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024357001 sr_ns: WERA05024357001
r: 03057695 p: 9.256 pid: 33692 b: WERA q: 0 st: lt: 12 ean: 4013288207968 sr: WERA 05023347001 sr_no_br: 05023347001 sr_no_br_cl: 05023347001 sr_cl: WERA05023347001 sr_dash: sold: 37.024 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Width across flats 6 mm With ball head No With handle Yes Handle type T-handle VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment Chrome plated Blade length 150 mm Short arm length 20 mm Overall length 150 mm Product Range Wera Hex-Plus n: WERA 454 HF T-handle hex screwdriver Hex-Plus with holding function, 6 x 150 mm - 05023347001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Hexagon Design With long and short arm, Hex-Plus, bevelled, matte chrome-plated, with holding function for hexagon socket screws on the long arm Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (blue = hexagon socket) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 454 HF T-handle hexagon screwdriver Hex-Plus with holding function, 6 x 150 mm kts: T-handle hex screwdriver Hex-Plus with holding function, 6 x 150 mm kpn: 454 HF kpn_dash: kpn_clear: 454HF bkpn: WERA 454 HF bkpn_clear: WERA 454HF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023347001 sr_ns: WERA05023347001
r: 41071122 p: 12.33 pid: 17781 b: WERA q: 0 st: lt: 13 ean: 4013288000484 sr: WERA 05002913001 sr_no_br: 05002913001 sr_no_br_cl: 05002913001 sr_cl: WERA05002913001 sr_dash: sold: 36.99 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Drive profile size 2 (bit) 7 mm Type of drive profile 1 (bit) Slotted Type of drive profile 2 (bit) Slotted Blade thickness 1 0,8 mm Blade thickness 2 1,2 mm Connection size (bit) 6 mm Connection profile (bit) Hexagonal Bit tip 1 Slotted 5 mm Bit tip 2 Slotted 7 mm Drive profile size 1 (bit) 5 mm n: WERA 81 combikling, 0.8 x 5 x 1.2 x 7 x 175 mm - 05002913001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade slotted/slotted for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drive sizes on one blade Application Slotted screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 81 Combination blade for slotted screws, 0.8 x 5 x 1.2 x 7 x 175 mm kts: combikling, 0.8 x 5 x 1.2 x 7 x 175 mm kpn: 81 kpn_dash: kpn_clear: 81 bkpn: WERA 81 bkpn_clear: WERA 81 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002913001 sr_ns: WERA05002913001
