r: 02833887 p: 7.396 pid: 43602 b: WERA q: 0 st: lt: 12 ean: 4013288172709 sr: WERA 05024353001 sr_no_br: 05024353001 sr_no_br_cl: 05024353001 sr_cl: WERA05024353001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size TT15 With handle No Handle type Overall length 90 mm Width 18 mm Drive (pin key) Torx Tamper Resistant n: WERA 967 SPKL TORX BO Multicolour open-end spanner, TX 15 x 90 mm - 05024353001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description Wera L-keys with finger-protecting plastic sleeves. This means they are ergonomic and pleasant to grip even in cold temperatures. At one end a TORX® BO profile: the bore hole in the bit and safety pin in the TORX® BO screw prevents any unauthorised loosening. Tamperproof fastening! The ballpoint on the long arm allows dependable working on TORX® screws even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-key for TORX® socket screws with safety pin TORX® ballpoint on the long arm Colour coded, easy-to-grip plastic sleeve, even at low temperatures Wear-resistant size marking BlackLaser for high corrosion protection and long service life Application TORX® socket screws with and without pin (BO = bore hole) Design BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball end on long arm Features and benefits L-key for TORX® socket screws with safety pin L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SPKL TORX® BO L-key Multicolour, TX 15 x 90 mm kts: open-end spanner, TX 15 x 90 mm kpn: 967 SPKL TORX BO Multicolour kpn_dash: kpn_clear: 967SPKLTORXBOMulticolour bkpn: WERA 967 SPKL TORX BO Multicolour bkpn_clear: WERA 967SPKLTORXBOMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024353001 sr_ns: WERA05024353001
r: 03227637 p: 7.396 pid: 71492 b: WERA q: 0 st: lt: 8 ean: 4013288189905 sr: WERA 05003387001 sr_no_br: 05003387001 sr_no_br_cl: 05003387001 sr_cl: WERA05003387001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 28 mm Type of drive profile (bit) Hexagon Blade thickness Connection size 1/4" VDE approved No With safety colour code 1000V Bit tip HEX 7/32" Drive profile size (bit) 7/32" Product Range Wera Zyklop n: WERA 8740 A HF Zyklop bit cap with 1/4" drive with holding function inner hexagon (7/32" x 28 mm) - 05003387001 cn: BIT SOCKET cn2: BIT SOCKET cn_clear: BITSOCKET d: Product description Bit socket with 1/4" drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool . Bit socket (non-impact) for manual or machine tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower end for more grip when used manually. Chrome vanadium steel, matte chrome-plated Application Hexagon socket screws Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, bit sockets with all the advantages of the Wera bit technology, brushed chrome-plated finish, holding function for hexagon socket screws. Take it easy tool finder: Colour coding to enable the desired bit socket to be easily located Features and benefits The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8740 A HF Zyklop bit socket with holding function, 1/4" drive, 7/32" x 28 mm kts: Zyklop bit cap with 1/4" drive with holding function inner hexagon (7/32" x 28 mm) kpn: 8740 A HF kpn_dash: kpn_clear: 8740AHF bkpn: WERA 8740 A HF bkpn_clear: WERA 8740AHF c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Bit socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera bit socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003387001 sr_ns: WERA05003387001
r: 03177085 p: 7.396 pid: 33039 b: WERA q: 0 st: lt: 10 ean: 4013288202499 sr: WERA 05073059001 sr_no_br: 05073059001 sr_no_br_cl: 05073059001 sr_cl: WERA05073059001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 4 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 4 mm n: WERA 840/4 Z SB bit, 4 x 50 mm (2 pcs) - 05073059001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 4 x 50 mm, 2 pieces 2x 840/4 Z bits: 4 x 50 mm kts: bit, 4 x 50 mm (2 pcs) kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073059001 sr_ns: WERA05073059001
r: 03228459 p: 7.396 pid: 70937 b: WERA q: 0 st: lt: 12 ean: 4013288211989 sr: WERA 05022676001 sr_no_br: 05022676001 sr_no_br_cl: 05022676001 sr_cl: WERA05022676001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 112 mm Short arm length 37 mm Overall length 112 mm n: WERA 950 SPKS socket spanner multi-colour metric 8 x 112 mm - 05022676001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. Hex-Plus L-keys provide larger contact surfaces on the screw head. The notching effect is thereby reduced to a minimum; the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult mounting positions. The BlackLaser surface treatment provides excellent surface protection, corrosion resistance and long life. Laser coated abrasion-resistant size markings on the L-keys for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKS L-key Multicolour, metric, 8 x 112 mm kts: socket spanner multi-colour metric 8 x 112 mm kpn: 950 SPKS kpn_dash: kpn_clear: 950SPKS bkpn: WERA 950 SPKS bkpn_clear: WERA 950SPKS c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022676001 sr_ns: WERA05022676001
r: 08103814 p: 7.396 pid: 72245 b: WERA q: 0 st: lt: 8 ean: 4013288230270 sr: WERA 05022658001 sr_no_br: 05022658001 sr_no_br_cl: 05022658001 sr_cl: WERA05022658001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 5/16" With ball head Yes With handle No Handle type VDE approved No Non-sparking No Blade length 112 mm Short arm length 37 mm Overall length 123 mm n: WERA 950 SPKS pin spanner Multicolour, inch, BlackLaser, 5/16" x 112 mm - 05022658001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. Hex-Plus L-keys provide larger contact surfaces on the screw head. The notching effect is thereby reduced to a minimum; the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult mounting positions. The BlackLaser surface treatment provides excellent surface protection, corrosion resistance and long life. Laser coated abrasion-resistant size markings on the L-keys for quick access. Short design Imperial L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKS L-key Multicolour, Imperial, BlackLaser, 5/16" x 112 mm kts: pin spanner Multicolour, inch, BlackLaser, 5/16" x 112 mm kpn: 950 SPKS kpn_dash: kpn_clear: 950SPKS bkpn: WERA 950 SPKS bkpn_clear: WERA 950SPKS c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022658001 sr_ns: WERA05022658001
r: 02827979 p: 7.396 pid: 45339 b: WERA q: 0 st: lt: 8 ean: 4013288094483 sr: WERA 05066685001 sr_no_br: 05066685001 sr_no_br_cl: 05066685001 sr_cl: WERA05066685001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 4 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 4 n: WERA 871/4 TORQ-SET Mplus bit, 4 x 89 mm - 05066685001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life 1/4" hexagon drive (Wera connecting series 4) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Mplus for higher breaking torque and longer service life Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. ds: dsc: Scope of delivery 871/4 TORQ-SET® Mplus bits, 4 x 89 mm kts: bit, 4 x 89 mm kpn: 871/4 TORQ-SET Mplus kpn_dash: 871/4 TORQ kpn_clear: 8714TORQSETMplus bkpn: WERA 871/4 TORQ-SET Mplus bkpn_clear: WERA 8714TORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066685001 sr_ns: WERA05066685001
r: 02834900 p: 7.39 pid: 33670 b: WERA q: 0 st: lt: 12 ean: 4013288093530 sr: WERA 05026352001 sr_no_br: 05026352001 sr_no_br_cl: 05026352001 sr_cl: WERA05026352001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T8 With handle Yes Handle type Flag handle Blade length (mm) 40 mm Overall length 69 mm Drive (pin key) Torx n: WERA 1267 A TORX flag spanner, TX 8 x 40 mm - 05026352001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality Wera flagdriver for recessed TORX® screws. High torque transfer for small screws. Particularly suitable for exchanging indexable inserts. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Multi-component for outstanding grip. TORX® flagdriver for recessed TORX® screws Multi-component handle Circular blade with BlackLaser treatment for outstanding surface protection and long service life High corrosion protection High torque transfer for small screws Application TORX® socket screws Blade Round Design BlackLaser surface Handle Multi-component Features and benefits ds: dsc: Scope of delivery 1267 A TORX® Flagdriver for TORX® screws, TX 8 x 40 mm kts: flag spanner, TX 8 x 40 mm kpn: 1267 A TORX kpn_dash: kpn_clear: 1267ATORX bkpn: WERA 1267 A TORX bkpn_clear: WERA 1267ATORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05026352001 sr_ns: WERA05026352001
r: 02653442 p: 7.39 pid: 43702 b: WERA q: 0 st: lt: 8 ean: 4013288112620 sr: WERA 05135202001 sr_no_br: 05135202001 sr_no_br_cl: 05135202001 sr_cl: WERA05135202001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T3 n: WERA 867/4 Z TORX bit, TX 3 x 50 mm - 05135202001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 3 x 50 mm kts: bit, TX 3 x 50 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135202001 sr_ns: WERA05135202001
r: 03228580 p: 7.33 pid: 71673 b: WERA q: 0 st: lt: 12 ean: 4013288193698 sr: WERA 05024453001 sr_no_br: 05024453001 sr_no_br_cl: 05024453001 sr_cl: WERA05024453001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T10 With handle No Handle type Overall length 112 mm Width 19 mm Drive (pin key) Torx n: WERA 967 XL HF TORX socket spanner with holding function, long, TX 10 x 112 mm - 05024453001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws The holding function on the long arm keeps screws securely on the tool BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 967 XL TORX® HF TORX® L-key with holding function, long, TX 10 x 112 mm kts: socket spanner with holding function, long, TX 10 x 112 mm kpn: 967 XL HF TORX kpn_dash: kpn_clear: 967XLHFTORX bkpn: WERA 967 XL HF TORX bkpn_clear: WERA 967XLHFTORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024453001 sr_ns: WERA05024453001
r: 03228595 p: 7.33 pid: 70445 b: WERA q: 0 st: lt: 14 ean: 4013288194084 sr: WERA 05024464001 sr_no_br: 05024464001 sr_no_br_cl: 05024464001 sr_cl: WERA05024464001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T15 With handle No Handle type Overall length 123 mm Width 21 mm Drive (pin key) Torx n: WERA 967 PKXL TORX open-end spanner, long, TX 15 x 123 mm - 05024464001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. The ball-end on the long arm allows for reliable working even in difficult installation situations. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws TORX® ballpoint on the long arm BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated Tip TORX® on short arm, TORX® ball-end on long arm Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 967 PKXL TORX® L-key, long, TX 15 x 123 mm kts: open-end spanner, long, TX 15 x 123 mm kpn: 967 PKXL TORX kpn_dash: kpn_clear: 967PKXLTORX bkpn: WERA 967 PKXL TORX bkpn_clear: WERA 967PKXLTORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024464001 sr_ns: WERA05024464001
r: 02010385 p: 7.31 pid: 42377 b: WERA q: 0 st: lt: 12 ean: 4013288108807 sr: WERA 05118075001 sr_no_br: 05118075001 sr_no_br_cl: 05118075001 sr_cl: WERA05118075001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 1/8" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V No Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 1/8" x 60 mm - 05118075001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 1/8" x 60 mm kts: Kraftform hexagonal screwdriver, 1/8" x 60 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118075001 sr_ns: WERA05118075001
r: 02835574 p: 7.31 pid: 42107 b: WERA q: 0 st: lt: 12 ean: 4013288032188 sr: WERA 05118082001 sr_no_br: 05118082001 sr_no_br_cl: 05118082001 sr_cl: WERA05118082001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 7/64" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 7/64" x 60 mm - 05118082001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 7/64" x 60 mm kts: Kraftform hexagonal screwdriver, 7/64" x 60 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118082001 sr_ns: WERA05118082001
r: 87010214 p: 7.29 pid: 70802 b: WERA q: 0 st: lt: 13 ean: 4013288033956 sr: WERA 05056174001 sr_no_br: 05056174001 sr_no_br_cl: 05056174001 sr_cl: WERA05056174001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 5,5 mm Blade thickness 1 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm n: WERA 800/1 BDC slotted screw bit, 1 x 5.5 x 25 mm - 05056174001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for slotted screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (yellow = slotted) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. Ideal for sensitive materials Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 800/1 BDC bits, 1 x 5.5 x 25 mm kts: slotted screw bit, 1 x 5.5 x 25 mm kpn: 800/1 BDC kpn_dash: kpn_clear: 8001BDC bkpn: WERA 800/1 BDC bkpn_clear: WERA 8001BDC c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056174001 sr_ns: WERA05056174001
r: 87010215 p: 7.29 pid: 72976 b: WERA q: 0 st: lt: 13 ean: 4013288033963 sr: WERA 05056176001 sr_no_br: 05056176001 sr_no_br_cl: 05056176001 sr_cl: WERA05056176001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 6,5 mm Blade thickness 1,2 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 6,5 mm n: WERA 800/1 BDC slotted screw bit, 1.2 x 6.5 x 25 mm - 05056176001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for slotted screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (yellow = slotted) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. Ideal for sensitive materials Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 800/1 BDC bits, 1.2 x 6.5 x 25 mm kts: slotted screw bit, 1.2 x 6.5 x 25 mm kpn: 800/1 BDC kpn_dash: kpn_clear: 8001BDC bkpn: WERA 800/1 BDC bkpn_clear: WERA 8001BDC c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056176001 sr_ns: WERA05056176001
r: 03228523 p: 7.272 pid: 71656 b: WERA q: 0 st: lt: 12 ean: 4013288194169 sr: WERA 05024473001 sr_no_br: 05024473001 sr_no_br_cl: 05024473001 sr_cl: WERA05024473001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T10 With handle No Handle type Overall length 112 mm Width 19 mm Drive (pin key) Torx n: WERA 967 SXL TORX HF Multicolour socket spanner with holding function, long, TX 10 x 112 mm - 05024473001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Take it easy Tool Finder with colour coding according to size. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool With Take it easy tool finder: colour coding by size Rubber sleeve for pleasant grip Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SXL HF TORX® L-key Multicolour with holding function, long, TX 10 x 112 mm kts: socket spanner with holding function, long, TX 10 x 112 mm kpn: 967 SXL TORX HF Multicolour kpn_dash: kpn_clear: 967SXLTORXHFMulticolour bkpn: WERA 967 SXL TORX HF Multicolour bkpn_clear: WERA 967SXLTORXHFMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024473001 sr_ns: WERA05024473001
r: 02835715 p: 7.272 pid: 43760 b: WERA q: 0 st: lt: 6 ean: 4013288032409 sr: WERA 05118130001 sr_no_br: 05118130001 sr_no_br_cl: 05118130001 sr_cl: WERA05118130001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 7/64" With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 7/64 x 60 mm - 05118130001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 7/64" x 60 mm kts: kraftform micro cap screwdriver 7/64 x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118130001 sr_ns: WERA05118130001
r: 02827072 p: 7.272 pid: 45671 b: WERA q: 0 st: lt: 12 ean: 4013288132796 sr: WERA 05073721001 sr_no_br: 05073721001 sr_no_br_cl: 05073721001 sr_cl: WERA05073721001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T15 Quantity per blister 2 n: WERA 867/4 Z SB bit, TX 15 x 50 mm (2 pcs) - 05073721001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z SB TORX® Bits, TX 15 x 50 mm, 2 pieces 2x 867/4 Z TORX® bits: TX 15 x 50 mm kts: bit, TX 15 x 50 mm (2 pcs) kpn: 867/4 Z SB kpn_dash: kpn_clear: 8674ZSB bkpn: WERA 867/4 Z SB bkpn_clear: WERA 8674ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073721001 sr_ns: WERA05073721001
r: 08103688 p: 7.272 pid: 69993 b: WERA q: 0 st: lt: 8 ean: 4013288224446 sr: WERA 05022696001 sr_no_br: 05022696001 sr_no_br_cl: 05022696001 sr_cl: WERA05022696001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 6 mm With ball head Yes With handle No Handle type VDE approved No Non-sparking No Blade length 172 mm Short arm length 31 mm Overall length 175 mm n: WERA 3950 SPKL Multicolour HF socket spanner, metric, stainless steel, with holding function, 6 x 172 mm - 05022696001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium stainless steel Wera L-key for hexagonal socket screws. Stainless steel prevents transmission of extraneous rust. The Hex-Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. With holding function for hexagonal socket screws on the long arm. With hexagonal ball tip at the long arm: The ball-shaped tip profiles enable the tool shaft to be moved and pivoted relative to the screw axis which allows screwdriving "around the corner". Take it easy tool finder with colour coding by size. In a nearly wear-free L-key clip. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Stainless L-keys prevent extraneous rust on stainless screws Hex-Plus allows socket head screws to live longer With holding function (HF) on the long arm to securely hold the screw on the tool The ball head on the long arm also allows offset use Application Hexagonal socket screws Design Stainless steel, with convenient colour-coded sleeve. All L-keys are easily accessible due to their colour coding and size markings. Tip Hex-Plus, hexagon ball head on the long arm, with holding function for hexagonal socket screws on the long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 3950 SPKL Multicolour HF L-key, metric, stainless steel, with holding function, 6 x 172 mm kts: socket spanner, metric, stainless steel, with holding function, 6 x 172 mm kpn: 3950 SPKL Multicolour HF kpn_dash: kpn_clear: 3950SPKLMulticolourHF bkpn: WERA 3950 SPKL Multicolour HF bkpn_clear: WERA 3950SPKLMulticolourHF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022696001 sr_ns: WERA05022696001
r: 08108006 p: 7.272 pid: 159591 b: WERA q: 0 st: lt: 8 ean: 4013288229434 sr: WERA 05006586001 sr_no_br: 05006586001 sr_no_br_cl: 05006586001 sr_cl: WERA05006586001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip T8 Drive profile size (bit) 8 Product Range Wera Kraftform Kompakt n: WERA 05006586001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 Blades made of stainless steel to prevent extraneous rust Vacuum ice-hardening provides the required hardness and strength 9 mm hex drive with with entry chamfer Application TORX® screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3067 i TORX® Take it easy SB, stainless steel, TX 8 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006586001 kpn_dash: kpn_clear: 05006586001 bkpn: WERA 05006586001 bkpn_clear: WERA 05006586001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006586001 sr_ns: WERA05006586001
r: 02830776 p: 7.272 pid: 44641 b: WERA q: 0 st: lt: 16 ean: 4013288181282 sr: WERA 05100055001 sr_no_br: 05100055001 sr_no_br_cl: 05100055001 sr_cl: WERA05100055001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ0 Drive type Pozidriv Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 355 SB Pozidriv screwdriver, PZ 0 x 60 mm - 05100055001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver by Wera. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver, for cross-recess screws, Pozidriv Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Suitable for Pozidriv screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 PZ SB Screwdriver for Pozidriv screws, PZ 0 x 60 mm kts: Pozidriv screwdriver, PZ 0 x 60 mm kpn: 355 SB kpn_dash: kpn_clear: 355SB bkpn: WERA 355 SB bkpn_clear: WERA 355SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100055001 sr_ns: WERA05100055001
