r: 87011040 p: 52.851 pid: 21020 b: WERA q: 0 st: lt: 14 ean: 4013288115126 sr: WERA 05071109001 sr_no_br: 05071109001 sr_no_br_cl: 05071109001 sr_cl: WERA05071109001 sr_dash: sold: 1321.275 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 Stainless 1 screwdriver bit set, 30-piece - 05071109001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bit-Check that can be positioned upright with high quality bits out of stainless steel. Wera stainless tools are manufactured out of stainless steel, thus preventing the formation of unsightly extraneous rust. 29 Wera stainless bits. 1 stainless Rapidaptor quick-release holder. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable, multi-component Bit-Check Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Rapidaptor technology for rapid bit change Industrial applications possible without any constraints 1 Rapidaptor stainless steel bit holder with quick-release chuck, 29 stainless steel bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Manufactured out of stainless steel thus preventing the formation of unsightly extraneous rust when working with stainless steel. Additionally, it offers all the advantages of the Rapidaptor technology. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Bit-Check 30 Stainless 1, 30 pieces 1x 3888/4/1 K Rapidaptor Universal Bit Holder, stainless: 1/4" x 50 mm 5x 3851/1 TS bits, stainless: PH 1x25 mm, 3x PH 2x25 mm, PH 3x25 mm 6x 3855/1 TS bits, stainless: 2x PZ 1x25 mm, 3x PZ 2x25 mm, PZ 3x25 mm 13x 3867/1 TS TORX® bits, stainless: 2x TX 10x25 mm, 2x TX 15x25 mm, 3x TX 20x25 mm, 3x TX 25x25 mm, 2x TX 30x25 mm, TX 40x25 mm 5x 3840/1 TS bits, stainless: 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 5.5x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 Stainless 1 kpn_dash: Bit kpn_clear: BitCheck30Stainless1 bkpn: WERA Bit-Check 30 Stainless 1 bkpn_clear: WERA BitCheck30Stainless1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05071109001 sr_ns: WERA05071109001
r: 03262247 p: 82.314 pid: 70648 b: WERA q: 0 st: lt: 12 ean: 4013288222879 sr: WERA 05023471001 sr_no_br: 05023471001 sr_no_br_cl: 05023471001 sr_cl: WERA05023471001 sr_dash: sold: 1317.024 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon; Slotted VDE approved No ESD No Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 400 RA Set 1 bit holder 416 RA with T handle + 1/4" bit set 16 pieces - 05023471001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece set in a robust textile box. One 416 RA T-handle bitholding screwdriver with ratchet functionality and Rapidaptor quick-release chuck for 1/4" bits. The integrated ratchet with fine toothing (80 teeth/return angle 4.5°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. With reversing lever for comfortable clockwise/counterclockwise direction change in one-hand operation. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle, friction loss between hand and handle is avoided. Bit holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. With Rapidaptor technology for lightning-fast bit changes. 16 tough bits, 1/4", 89 mm long, for universal use. The integrated ratchet with fine toothing ensures fast and safe working Convenient working thanks to the ratchet mechanism fully embedded in the handle Reversing lever for comfortable clockwise/counterclockwise direction change Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Rapidaptor bitholding screwdriver with fast-rotating sleeve for lightning-fast bit changes and high working speeds 17-piece setTextile box with one 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck, 16 tough bits, 1/4", 89 mm length Features and benefits The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The integrated ratchet with fine toothing (80 teeth) and a return angle of 4.5° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The change of direction can easily be made using the reversing lever. The fast-rotating sleeve allows the tool to be guided safely while screwdriving and increases the working speed. The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 400 RA Set 1, 17 pieces 1x 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck: 1/4" x 45 mm 2x 851/4 Z bits: PH 2x89 mm, PH 3x89 mm 2x 855/4 Z bits: PZ 2x89 mm, PZ 3x89 mm 6x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm, TX 40x89 mm 5x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm, 8x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: bit holder 416 RA with T handle + 1/4" bit set 16 pieces kpn: Kraftform Kompakt 400 RA Set 1 kpn_dash: kpn_clear: KraftformKompakt400RASet1 bkpn: WERA Kraftform Kompakt 400 RA Set 1 bkpn_clear: WERA KraftformKompakt400RASet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05023471001 sr_ns: WERA05023471001
r: 02865682 p: 131.57 pid: 70142 b: WERA q: 0 st: lt: 8 ean: 4013288193773 sr: WERA 05075651001 sr_no_br: 05075651001 sr_no_br_cl: 05075651001 sr_cl: WERA05075651001 sr_dash: sold: 1315.7 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Drive profile size 9 x 12 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 2,5-25 Nm Max. tightening torque 25 Nm Product Range Wera Click-Torque n: WERA Click-Torque X 1 torque spanner for insert tools, 2.5-25 Nm, 9x12 x 2.5-25 nm - 05075651001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand and left-hand use and with 9x12mm insert square for the insertion of insert tools. For 9x12 mm interchangeable insert tools. Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 2.5-25 Nm; precision ±4 % as per DIN EN ISO 6789-1:2017-07 Very robust design with ergonomic 2-component handle suitable for right and left-handed use Application For right and left-handed use Precision ± 4% of set value, as per DIN EN ISO 6789-1: 2017-07 Design For 9x12 mm interchangeable insert tools; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). For 9x12 mm interchangeable insert tools. Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The Click-Torque wrenches for insert tools are suitable forclockwise and counterclockwise uses. ds: dsc: Scope of delivery Click-Torque X 1 torque wrench for insert tools, 2.5-25 Nm, 9x12 x 2.5-25 Nm kts: torque spanner for insert tools, 2.5-25 Nm, 9x12 x 2.5-25 nm kpn: Click-Torque X 1 kpn_dash: Click kpn_clear: ClickTorqueX1 bkpn: WERA Click-Torque X 1 bkpn_clear: WERA ClickTorqueX1 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075651001 sr_ns: WERA05075651001
r: 03176897 p: 7.768 pid: 33853 b: WERA q: 0 st: lt: 15 ean: 4013288219039 sr: WERA 05020190001 sr_no_br: 05020190001 sr_no_br_cl: 05020190001 sr_cl: WERA05020190001 sr_dash: sold: 1297.256 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 5,5 mm Length 105 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (5.5 x 105 mm) - 05020190001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 5.5 x 105 mm kts: ring spanner (5.5 x 105 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020190001 sr_ns: WERA05020190001
r: 41071277 p: 14.71 pid: 71866 b: WERA q: 24 st: 1 lt: 1 ean: 4013288104809 sr: WERA 05022086001 sr_no_br: 05022086001 sr_no_br_cl: 05022086001 sr_cl: WERA05022086001 sr_dash: sold: 1294.48 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 6 socket wrench set metric BlackLaser 9-piece - 05022086001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. L-keys with Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer BlackLaser for high corrosion protection and long service life L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 6 L-key set, metric, BlackLaser, 9 pieces 9x 950 PKL BM L-key, metric, BlackLaser: 1.5x90 mm, 2x100 mm, 2.5x112 mm, 3x126 mm, 4x140 mm, 5x160 mm, 6x180 mm, 8x200 mm, 10x219 mm kts: socket wrench set metric BlackLaser 9-piece kpn: 950/9 Hex-Plus 6 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus6 bkpn: WERA 950/9 Hex-Plus 6 bkpn_clear: WERA 9509HexPlus6 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022086001 sr_ns: WERA05022086001
r: 02836381 p: 32.892 pid: 32704 b: WERA q: 2 st: 1 lt: 1 ean: 4013288174048 sr: WERA 05004034001 sr_no_br: 05004034001 sr_no_br_cl: 05004034001 sr_cl: WERA05004034001 sr_dash: sold: 1282.788 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 222 mm Drive profile size 3/8" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8004 B Zyklop Metal ratchet with shuttle lever with 3/8" drive (3/8" x 222 mm) - 05004034001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5°. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life. Convenient direction change thanks to switchover lever Extremely slim ratchet with long lever Return angle of only 5° Secure socket locking For 3/8" square sockets with ball lock Application 3/8" square sockets as well as for 3/8" adaptors with square drive, with ball locking device Design Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces; fine-tooth mechanism with 72 teeth for a return angle of only 5°; switch lever for convenient change of direction; secure socket locking function Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces. Switch lever for convenient change of direction. Fine-pitched with 72 teeth for a return angle of only 5° The ball lock ensures sockets and accessories fit securely, providing increased safety during operation. A short press on the release button allows the tool to be changed quickly. ds: dsc: Scope of delivery 8004 B Zyklop Metal Ratchet with switch lever and 3/8" drive, 3/8" x 222 mm kts: Zyklop Metal ratchet with shuttle lever with 3/8" drive (3/8" x 222 mm) kpn: 8004 B kpn_dash: kpn_clear: 8004B bkpn: WERA 8004 B bkpn_clear: WERA 8004B c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004034001 sr_ns: WERA05004034001
r: 08085420 p: 98.305 pid: 72001 b: WERA q: 0 st: lt: 14 ean: 4013288225290 sr: WERA 05150104001 sr_no_br: 05150104001 sr_no_br_cl: 05150104001 sr_cl: WERA05150104001 sr_dash: sold: 1277.965 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 12 n: WERA 9713 screwdriver set Hex Set 1 in foam insert 12-piece - 05150104001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 10 Wera screwdrivers (workshop, Micro and T-handle) for hexagonal socket screws and 2 Wera screwdrivers with hollow shaft for external hexagon screws. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 12-piece screwdriver set for hexagonal socket screws and external hexagon screws in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth (without tools): 344 x 30 x 392 mm, with tools 344 x 45 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Screwdrivers with a hollow shaft are useful for screwdriving on thread rods, as the thread rod can penetrate into the hollow shaft of the screwdriver and the nut can be operated. The Kraftform Micro screwdrivers with their power-, fast rotating- and precision zones perfectly meet the requirements for precision mechanical couplings. The smooth-running cap, on which you can rest your hand, ideally supports these advantages. ds: dsc: Scope of delivery 9713 Foam insert Hex screwdriver set 1, 12 pieces 2x 354 Screwdriver for hexagon socket screws: 3x75 mm, 4x75 mm 3x 2054 Screwdriver for hexagon socket screws for electronic applications: 1.5x60 mm, 2x60 mm, 2.5x60 mm 5x 454 HF T-handle hexagon screwdriver Hex-Plus with holding function: 4x100 mm, 5x100 mm, 6x150 mm, 8x200 mm, 10x200 mm 2x 395 HO Nutdriver: 10x90 mm, 13x90 mm 1x 9813 Foam insert Hex screwdriver set 1, empty: 344 x 30 x 392 mm kts: screwdriver set Hex Set 1 in foam insert 12-piece kpn: 9713 kpn_dash: kpn_clear: 9713 bkpn: WERA 9713 bkpn_clear: WERA 9713 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module sr_no_br_cl_ns: 05150104001 sr_ns: WERA05150104001
r: 03166850 p: 60.495 pid: 31376 b: WERA q: 1 st: 1 lt: 1 ean: 4013288214874 sr: WERA 05023452001 sr_no_br: 05023452001 sr_no_br_cl: 05023452001 sr_cl: WERA05023452001 sr_dash: sold: 1270.395 p_range: none type: standard act: 1 avo: 1 av: Min. head size 10 mm Max. head size 45 mm Type of drive profile Torx Quantity per set 7 n: WERA 467/7 HF Set 1 screwdriver set T-handle Torx screwdriver with grip function 7-piece - 05023452001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description T-handle screwdrivers: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the TORX® screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Application TORX®, with holding function on the long arm for TORX® screws as per specification "Acument Intellectual Properties" Design With Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamping. 7-piece set and 2 racks in display carton Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Including useful rack for well-arranged storage of the screwdrivers. ds: dsc: Scope of delivery 467/7 TORX® HF Set 1 screwdriver set T-handle TORX® screwdrivers with holding function, 7 pieces 7x 467 TORX® HF T-handle screwdriver with holding function: TX 10x100 mm, TX 15x100 mm, TX 20x100 mm, TX 25x100 mm, TX 30x200 mm, TX 40x200 mm, TX 45x200 mm 2x Rack for Kraftform screwdrivers: 190 x 50 mm kts: screwdriver set T-handle Torx screwdriver with grip function 7-piece kpn: 467/7 HF Set 1 kpn_dash: kpn_clear: 4677HFSet1 bkpn: WERA 467/7 HF Set 1 bkpn_clear: WERA 4677HFSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05023452001 sr_ns: WERA05023452001
r: 08085431 p: 90.041 pid: 72013 b: WERA q: 0 st: lt: 13 ean: 4013288225177 sr: WERA 05150181001 sr_no_br: 05150181001 sr_no_br_cl: 05150181001 sr_cl: WERA05150181001 sr_dash: sold: 1260.574 p_range: none type: standard act: 1 avo: 1 av: Pliers type Assortment VDE approved No With safety colour code 1000V No ESD No Non-sparking No Quantity per set 3 n: WERA 9781 foam insert with KNIPEX pliers Set 2, 3-piece - 05150181001 cn: PLIERS MODULE cn2: PLIERS MODULE cn_clear: PLIERSMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with 1 KNIPEX snipe nose cutting pliers (stork beak pliers), 1 KNIPEX mechanics' pliers as well as 1 KNIPEX electricians' shears. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 3-piece pliers set (1 KNIPEX snipe nose cutting pliers (stork beak pliers), 1 KNIPEX mechanics' pliers, 1 KNIPEX electricians' shears ), in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 38 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. ds: dsc: Scope of delivery 9781 Foam insert KNIPEX pliers set 2, 3 pieces 1x KNIPEX Snipe Nose Cutting Pliers (Stork Beak Pliers) 26 15 200: 200 mm 1x KNIPEX Mechanics' Pliers 38 25 200: 200 mm 1x KNIPEX Electricians' Shears 95 05 155: 155 mm 1x 9881 Foam insert KNIPEX pliers set 2, empty: 172 x 30 x 392 mm kts: foam insert with KNIPEX pliers Set 2, 3-piece kpn: 9781 kpn_dash: kpn_clear: 9781 bkpn: WERA 9781 bkpn_clear: WERA 9781 c_path: Home / Tools / Hand tools / Pliers, grippers and tweezers / Sets / Pliers module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera pliers, grippers and tweezers / Wera sets / Wera pliers module sr_no_br_cl_ns: 05150181001 sr_ns: WERA05150181001
r: 08085424 p: 125.785 pid: 70288 b: WERA q: 0 st: lt: 14 ean: 4013288225313 sr: WERA 05150113001 sr_no_br: 05150113001 sr_no_br_cl: 05150113001 sr_cl: WERA05150113001 sr_dash: sold: 1257.85 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 3/8" Type of drive profile Hexagonal Quantity per set 22 Product Range Wera Zyklop n: WERA 9723 9723 Foam insert with Zyklop B 3/8" bit sockets Set 1, 22-piece - 05150113001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with 21 Wera bit sockets, 3/8" and one Zyklop connector with quick-release chuck for 1/4" bits. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 22-piece Zyklop bit socket set, 3/8", in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 39 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 9723 Foam insert Zyklop B 3/8" bit socket set 1, 22 pieces 1x 8784 B1 Zyklop bit adaptor, 3/8": 1/4" x 3/8" x 44 mm 10x 8767 B HF TORX® Zyklop bit socket with holding function, 3/8" drive: TX 15x35 mm, TX 20x35 mm, TX 25x35 mm, TX 25x107 mm, TX 27x35 mm, TX 27x107 mm, TX 30x35 mm, TX 30x107 mm, TX 40x35 mm, TX 40x107 mm 11x 8740 B HF Zyklop bit socket with holding function, 3/8" drive: 4x35 mm, 4x107 mm, 5x35 mm, 5x107 mm, 6x35 mm, 6x107 mm, 7x38.5 mm, 8x38.5 mm, 8x100 mm, 10x38.5 mm, 10x100 mm 1x 9823 Foam insert Zyklop B 3/8" bit socket set 1, empty: 172 x 30 x 392 mm kts: 9723 Foam insert with Zyklop B 3/8" bit sockets Set 1, 22-piece kpn: 9723 kpn_dash: kpn_clear: 9723 bkpn: WERA 9723 bkpn_clear: WERA 9723 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05150113001 sr_ns: WERA05150113001
r: 02831995 p: 34.876 pid: 42462 b: WERA q: 0 st: lt: 14 ean: 4013288180858 sr: WERA 05024335001 sr_no_br: 05024335001 sr_no_br_cl: 05024335001 sr_cl: WERA05024335001 sr_dash: sold: 1255.536 p_range: none type: standard act: 1 avo: 1 av: Min. head size 8 Max. head size 40 Type of drive profile Torx Plus Tamper Resistant Supplied in Clip Quantity per set 9 Material Stainless steel n: WERA 967/9 TX BO Multicolour 1 socket wrench set BlackLaser 9-piece - 05024335001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description L-keys with thermoplastic sleeve (SPKL) out of easy-to-grip circular material. The sleeve ensures that work is pleasant and easy on the fingers even at low temperatures. All L-keys are quickly to hand thanks to their size markings. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. For TORX® and TORX® BO (with bore hole) screw connections. The plastic sleeve ensures that work is pleasant and safe even at low temperatures BlackLaser for high corrosion protection and long service life The TORX® ballpoint on the long arm allows offset applications Wear-resistant inscription of the sizes of the L-keys contained on the clip Size markings 9-piece set in a two-component clip. For recessed screws, it's often advantageous for the screw to be held on the L-key by magnetic force. The Wera clips with magnetiser/demagnetiser enable a magnetisation/demagnetisation of L-keys in a flash. Application TORX® socket screws with and without pin (BO = bore hole) Design BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball-end on long arm Features and benefits L-key for TORX® socket screws with safety pin TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. For recessed screws, it's often advantageous for the screw to be held on the L-key by magnetic force. The Wera clips with magnetiser/demagnetiser enable a magnetisation/demagnetisation of L-keys in a flash. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 967/9 TX BO Multicolour 1 L-key set for tamper-proof TORX® screws, BlackLaser, 9 pieces 9x 967 SPKL TORX® BO L-key Multicolour: TX 9x79 mm, TX 8x76 mm, TX 10x85 mm, TX 15x90 mm, TX 20x96 mm, TX 25x104 mm, TX 30x122 mm, TX 40x132 mm, TX 27x112 mm kts: socket wrench set BlackLaser 9-piece kpn: 967/9 TX BO Multicolour 1 kpn_dash: kpn_clear: 9679TXBOMulticolour1 bkpn: WERA 967/9 TX BO Multicolour 1 bkpn_clear: WERA 9679TXBOMulticolour1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05024335001 sr_ns: WERA05024335001
r: 08131779 p: 208.925 pid: 173561 b: WERA q: 0 st: lt: 28 ean: 4013288234261 sr: WERA 05006633001 sr_no_br: 05006633001 sr_no_br_cl: 05006633001 sr_cl: WERA05006633001 sr_dash: sold: 1253.55 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 23 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 interchangeable pins set, 23 pieces - 05006633001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 23-piece Kraftform Kompakt VDE set. One Safe-Torque Speed 7508 VDE torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), one 7516 VDE Safe-Torque Speed torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), each with a fixed position (Torque Lock) for unlimited loosening and tightening moments, digital torque value display, reliable slip-over mechanism when the set torque is reached, one 817 VDE bladeholding screwdriver. Torque wrenches and bladeholding screwdriver solely for Wera VDE blades. 20 VDE blades (each 157 mm length) with Take it easy tool finder: colour coding by profile and laser-engraved size indication, most of which with reduced blade diameter, so that even low-lying screw and spring elements can be easily reached and operated. In a robust textile box for neat storage and convenient transport. Individually tested tools as per IEC 60900 VDE bladeholding torque screwdriver 7508 VDE with 5 pre-set values (0.4; 0.8; 1.2; 1.6; 2.0 Nm) VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) Speed: Extremely fast setting of desired torque values Safe: Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation 23-piece setOne Safe-Torque Speed 7508 VDE torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), one Safe-Torque Speed 7516 VDE torque wrench with five selectable maximum tightening torques (2.4; 2.8; 3.2; 3.6; 4.0 Nm), each with a fixed position (Torque Lock) for unlimited loosening and tightening moments, digital torque value display, reliable slip-over mechanism when the set torque is reached, one 817 VDE Kraftform bitholding screwdriver, torque wrenches and bitholding screwdriver solely for Wera VDE blades, 20 VDE blades (each 157 mm length) with Take it easy toolfinder: colour coding by profile and laser-engraved size indication, most of which with reduced blade diameter, so that even low-lying screw and spring elements can be easily reached and operatedIn a robust textile box. Features and benefits The handle/blade system - Kraftform Kompakt VDE Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. Quick setting of the selectable tightening torque values. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The slip-over torque mechanism for clockwise/counterclockwise torque operation prevents unintentional application of excessive torque. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. ds: dsc: Scope of delivery Kraftform Kompakt VDE Safe-Torque Speed control cabinet Set 1, 23 pieces 1x 7508 VDE Kraftform Safe-Torque Speed Torque screwdriver, 0.4-2.0 Nm: 9 x 0.4 Nm x 0.8 Nm x 1.2 Nm x 1.6 Nm x 2.0 Nm x 192 mm 1x 7516 VDE Kraftform Safe-Torque Speed Torque screwdriver, 2.4-4.0 Nm: 9 x 2.4 Nm x 2.8 Nm x 3.2 Nm x 3.6 Nm x 4.0 Nm x 192 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S Take it easy: # 1x157 mm, # 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 2x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 30x157 mm 4x Kraftform Kompakt VDE 64 i Take it easy: 2.5x157 mm, 3x157 mm, 4x157 mm, 5x157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: interchangeable pins set, 23 pieces kpn: Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 kpn_dash: Kraftform Kompakt VDE Safe kpn_clear: KraftformKompaktVDESafeTorqueSpeedschakelkastset1 bkpn: WERA Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 bkpn_clear: WERA KraftformKompaktVDESafeTorqueSpeedschakelkastset1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006633001 sr_ns: WERA05006633001
r: 02832340 p: 15.041 pid: 20017 b: WERA q: 0 st: lt: 11 ean: 4013288157805 sr: WERA 05057675001 sr_no_br: 05057675001 sr_no_br_cl: 05057675001 sr_cl: WERA05057675001 sr_dash: sold: 1248.403 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic Yes Length 75 mm n: WERA 897/4 Impaktor holder with clamping ring and magnet, 1/4" x 75 mm - 05057675001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Wera Impaktor holder for the absorption of impulse peaks. Particular torsion effect thanks to the double-torsion spring. The retaining ring ensures an optimum fit of the tool in the holder. The magnet provides for additional fixing of the bit and screw. The Impaktor stainless holder with retaining ring and magnet meets the extremely dynamic demands by doing without any small, mechanical parts that are often susceptible. Used mostly for industrial assembly applications such as e.g. with screwdriving robots. Output: suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Drive: 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Impaktor holder with retaining ring and magnet for bits with 1/4" hexagon head drive Double-torsion spring to absorb extreme impulse peaks Stainless holder with magnet for the secure fit of bit and screw Particularly suitable for use with customary impact drivers 1/4" hexagon drive Impaktor holder to cushion extreme impulse peaks, special torsion effect from the double-torsion spring, equipped with a retaining ring for a secure fit of the bits in the holder, holder out of stainless steel, fitted with magnet for a secure positioning of the bit and screw. Output Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and Wera Series 1 Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry (two coupled torsion zones that perform successively), fitted with strong retaining ring and magnet Drive 1/4" hexagon, suitable for power driven screwdrivers withDIN ISO 1173-F 6.3 chucks Features and benefits The Impaktor stainless steel holder with a retaining ring and magnet satisfies the extreme, dynamic requirements in that there are consciously no small mechanical component parts fitted as they would be more susceptible to failure. It focuses on the basic bit holding function and the cushioning of the extreme impulse peaks with its two different torsion zones. Mainly used in industrial screw assembly applications e.g. with screwdriving robots. Suitable for extra high torque e.g. from modern 18 volt impact screwdrivers with particularly high resilience. Reduces the risk of premature breakage of the holder or bit and increases the productivity when screwdriving with power tools. Wera's Impaktor system consisting of Impaktor bits and Impaktor holders is today's necessary addition to the BiTorsion system with the creation of the TriTorsion system. Wera Impaktor bits and holders can also be used individually. However, the best results are achieved with the combination of the two tools that are optimally matched to one another. ds: dsc: Scope of delivery 897/4 IMP Impaktor holder with retaining ring and magnet, 1/4" x 75 mm kts: holder with clamping ring and magnet, 1/4" x 75 mm kpn: 897/4 Impaktor kpn_dash: kpn_clear: 8974Impaktor bkpn: WERA 897/4 Impaktor bkpn_clear: WERA 8974Impaktor c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05057675001 sr_ns: WERA05057675001
r: 02829030 p: 53.677 pid: 42292 b: WERA q: 0 st: lt: 12 ean: 4013288138521 sr: WERA 05072448001 sr_no_br: 05072448001 sr_no_br_cl: 05072448001 sr_cl: WERA05072448001 sr_dash: sold: 1234.571 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 Quantity per box 100 n: WERA 867/1 TORX DIY 100 SiS bits, TX 20 x 25 mm (100 pcs) - 05072448001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® DIY 100, TX 20 x 25 mm, 100 pieces 100x 867/1 TORX® bits: TX 20 x 25 mm kts: bits, TX 20 x 25 mm (100 pcs) kpn: 867/1 TORX DIY 100 SiS kpn_dash: kpn_clear: 8671TORXDIY100SiS bkpn: WERA 867/1 TORX DIY 100 SiS bkpn_clear: WERA 8671TORXDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072448001 sr_ns: WERA05072448001
r: 02897330 p: 40.661 pid: 31144 b: WERA q: 0 st: lt: 14 ean: 4013288191007 sr: WERA 05003345001 sr_no_br: 05003345001 sr_no_br_cl: 05003345001 sr_cl: WERA05003345001 sr_dash: sold: 1219.83 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Type of drive profile Hexagonal Quantity per set 5 Product Range Wera Zyklop n: WERA 8740 A HF 1 Zyklop bit socket set hexagon socket with holding function 1/4" drive 5-piece - 05003345001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Bit socket set, hexagon socket, with holding function for particularly convenient screwdriving with reduced risk of losing the screw when addressing the workpiece. Compact textile box with high robustness, low weight and volume Bit socket (non-impact) for manual or power tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower socket end for more grip when used manually 5-piece setPouch with 100 mm bit sockets5 Zyklop bit sockets for hexagon socket screws, with 1/4" drive, with holding function, Take it easy tool finder: Colour coding to enable the desired bit socket to be easily located. Features and benefits The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8740 A HF 1 Zyklop bit socket set with holding function, 1/4" drive, 5 pieces 5x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 4x100 mm, 5x100 mm, 6x100 mm, 7x100 mm, 8x100 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Zyklop bit socket set hexagon socket with holding function 1/4" drive 5-piece kpn: 8740 A HF 1 kpn_dash: kpn_clear: 8740AHF1 bkpn: WERA 8740 A HF 1 bkpn_clear: WERA 8740AHF1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003345001 sr_ns: WERA05003345001
r: 03166820 p: 54.38 pid: 31361 b: WERA q: 0 st: lt: 13 ean: 4013288194947 sr: WERA 05003970001 sr_no_br: 05003970001 sr_no_br_cl: 05003970001 sr_cl: WERA05003970001 sr_dash: sold: 1196.36 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 3/8" Min. socket size 8 mm; 19 mm Quantity per set 10 Product Range Wera Zyklop n: WERA Belt B 1 Zyklop socket set with holding function and 3/8" drive 10-piece - 05003970001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Typically Wera designed robust textile belt with 9 sockets taking up minimal space. A smooth Twist to Unlock mechanism ensures a secure fit and simple removal of the sockets. Comes with Take it easy Tool Finder with colour coding according to size to enable the right tool to be selected easily and quickly. Includes a snap hook for secure fastening to a belt loop or pocket. Sockets with holding function for particularly convenient screwdriving with reduced risk of losing the screw when approaching the workpiece. Supplied with a non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. 10-piece 3/8" socket set on robust textile belt Sockets with holding function for screws/bolts/nuts Smooth rotary mechanism for a secure hold and easy access of the tools With Take it easy tool finder: colour coding by size Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System 10-piece set; robust textile socket belt, including snap hook to enable secure fastening to a belt loop or pocket. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets.9 Zyklop sockets with 3/8" drive with fastener holding function. Take it easy tool finder: Colour coding to enable the desired socket to be easily selected. 1 tool for the simple removal of nuts from sockets with holding function. Features and benefits Whoever would have thought that the storage of sockets could be completely revolutionised and that someone could come up with a stylish belt with securely attached sockets that can still be easily removed. The clamping of the screw is achieved by a twin spring loaded ball retention system. The tubing is effectively protected against mechanical wear and tear by a steel ring. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. This tool enables hexagon nuts to be easily removed from sockets with holding function. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. The robust textile belt can be secured to a belt loop or pocket by means of the snap hook. ds: dsc: Scope of delivery Belt B 1 Zyklop socket set with holding function, 3/8" drive, 10 pieces 9x 8790 HMB HF Zyklop socket with 3/8" drive with holding function: 8x29 mm, 10x29 mm, 12x29 mm, 13x29 mm, 15x29 mm, 16x29 mm, 17x29 mm, 18x29 mm, 19x29 mm 1x Nut Extractor: 43 x 14 mm 1x Belt B (textile belt), 9 location, unloaded: 45 x 310 mm 1x Hook and Loop Fastener Strips 30: 30 x 200 mm kts: socket set with holding function and 3/8" drive 10-piece kpn: Belt B 1 Zyklop kpn_dash: kpn_clear: BeltB1Zyklop bkpn: WERA Belt B 1 Zyklop bkpn_clear: WERA BeltB1Zyklop c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003970001 sr_ns: WERA05003970001
r: 41070212 p: 12.3 pid: 71041 b: WERA q: 48 st: 1 lt: 1 ean: 4013288027245 sr: WERA 05006110001 sr_no_br: 05006110001 sr_no_br_cl: 05006110001 sr_cl: WERA05006110001 sr_dash: sold: 1193.1 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 3,5 mm Blade length 100 mm Blade thickness 0,6 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 i VDE insulated slotted screwdriver, 0.6 x 3.5 x 100 mm - 05006110001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i VDE Insulated screwdriver for slotted screws, 0.6 x 3.5 x 100 mm kts: insulated slotted screwdriver, 0.6 x 3.5 x 100 mm kpn: 160 i VDE kpn_dash: kpn_clear: 160iVDE bkpn: WERA 160 i VDE bkpn_clear: WERA 160iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006110001 sr_ns: WERA05006110001
r: 02688549 p: 15.661 pid: 44402 b: WERA q: 3 st: 1 lt: 1 ean: 4013288164360 sr: WERA 05073270001 sr_no_br: 05073270001 sr_no_br_cl: 05073270001 sr_cl: WERA05073270001 sr_dash: sold: 1190.236 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 10 mm Overall length 159 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 10 x 159 mm - 05073270001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 10 x 159 mm kts: socket and ring spanner, 10 x 159 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073270001 sr_ns: WERA05073270001
r: 02865687 p: 148.595 pid: 33577 b: WERA q: 0 st: lt: 15 ean: 4013288193780 sr: WERA 05075653001 sr_no_br: 05075653001 sr_no_br_cl: 05075653001 sr_cl: WERA05075653001 sr_dash: sold: 1188.76 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 20 Nm Drive profile size 9 x 12 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 20-100 Nm Max. tightening torque 100 Nm Product Range Wera Click-Torque n: WERA Click-Torque X 3 torque spanner for insert tools, 20-100 Nm, 9x12 x 20-100 Nm - 05075653001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand and left-hand use and with 9x12mm insert square for the insertion of insert tools. For 9x12 mm interchangeable insert tools. Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 20-100 Nm; precise to ± 3% as per DIN EN ISO 6789-1:2017-07 Very robust design with ergonomic 2-component handle suitable for right and left-handed use Application For right and left-handed use Precision ± 3% of set value, as per DIN EN ISO 6789-1: 2017-07 Design For 9x12 mm interchangeable insert tools; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). For 9x12 mm interchangeable insert tools. Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The Click-Torque wrenches for insert tools are suitable forclockwise and counterclockwise uses. ds: dsc: Scope of delivery Click-Torque X 3 torque wrench for insert tools, 20-100 Nm, 9x12 x 20-100 Nm kts: torque spanner for insert tools, 20-100 Nm, 9x12 x 20-100 Nm kpn: Click-Torque X 3 kpn_dash: Click kpn_clear: ClickTorqueX3 bkpn: WERA Click-Torque X 3 bkpn_clear: WERA ClickTorqueX3 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075653001 sr_ns: WERA05075653001
r: 03226514 p: 79.008 pid: 70175 b: WERA q: 0 st: lt: 12 ean: 4013288220592 sr: WERA 05004174001 sr_no_br: 05004174001 sr_no_br_cl: 05004174001 sr_cl: WERA05004174001 sr_dash: sold: 1185.12 p_range: none type: standard act: 1 avo: 1 av: Min. head size 3 mm Max. head size 10 mm Type of drive profile Mixed Quantity per set 10 n: WERA Bicycle Set 6 spanner set with T handle 10-piece - 05004174001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description 10-piece T-handle screwdriver set for operations on the bike: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function at the long arm to hold the TORX® and hexagonal socket screws (from size 3) securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. With extra-short arm for the transmission of extremely high torques through the leverage of the long arm. Including metal rack for clearly arranged storage in the workshop. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Application Hexagonal socket screws, with holding function at the long arm from size 3; TORX®, with holding function at the long arm for TORX® screws as per Acument Intellectual Properties specifications Design With Take it easy tool finder: Colour coding by profile (blue = hexagonal socket, green = TORX®) and size stamping. 10-piece set in a box, plus 1 rack Features and benefits T-handle screwdriver for the transmission of particularly high tightening and loosening torque The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery Bicycle Set 6, 10 pieces 1x 454 T-handle hexagon screwdriver Hex-Plus: 2.5 x 100 mm 6x 454 HF T-handle hexagon screwdriver Hex-Plus with holding function: 3x100 mm, 4x150 mm, 5x150 mm, 6x200 mm, 8x200 mm, 10x200 mm 3x 467 TORX® HF T-handle screwdriver with holding function: TX 10x100 mm, TX 20x100 mm, TX 25x200 mm kts: spanner set with T handle 10-piece kpn: Bicycle Set 6 kpn_dash: kpn_clear: BicycleSet6 bkpn: WERA Bicycle Set 6 bkpn_clear: WERA BicycleSet6 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05004174001 sr_ns: WERA05004174001
