A telescopic support holds boards, panels and structural parts in place temporarily, so you can keep working with both hands free. When fitting ceiling and plasterboard, setting window frames or backing up formwork, the support takes the weight and keeps everything tight at height. You extend the pole to the length you need and then lock it under light tension between floor and ceiling.
When choosing, look mainly at the working range and the maximum load: short models from around 910 mm suit low rooms, while versions up to 3000 mm reach high ceilings. A quick-clamp mechanism or a pressure plate with fine adjustment lets you press home the last few millimetres accurately and without damage.
Wide bearing pads spread the load and prevent dents in soft materials. Bessey, Carat, Stanley and Spit supply supports for both finishing and structural work, so you have a fitting solution for every working height.
r: 03178035 p: 46.611 pid: 153504 b: BESSEY q: 25 st: 1 lt: 1 ean: 4008158041261 sr: BESSEY STE300 sr_no_br: STE300 sr_no_br_cl: STE300 sr_cl: BESSEYSTE300 sr_dash: sold: 45632.169 p_range: none type: standard act: 1 avo: 1 av: Min. height 170 cm Max. height 300 cm Max. load capacity 350 kg n: BESSEY STE 300 ceiling and mounting bracket 1700-3000mm - STE300 cn: TELESCOPIC SUPPORT cn2: TELESCOPIC SUPPORT cn_clear: TELESCOPICSUPPORT d: Product description Load capacity up to 350 kg when fully retracted telescopic pole Extremely stable construction through high-load-bearing steel tubes and non-slip PVC contact surfaces (9 x 7 cm) One-hand operation thanks to 2-component plastic handle with pump mechanism Quick-release button for quickly retracting and extending the telescopic pole Adjustable holding force by turning the support on the handle Can also be used in inclined positions thanks to the contact surfaces, which can be tilted continuously from -45° to +45° GS-certified for quality and safety Extremely secure grip The support guarantees a reliable, secure grip through the extremely stable construction for a load capacity of up to 350 kg - depending on the support size and extension length through rubber PVC contact surfaces at the top and bottom through slip protection integrated in the handle Precise and fast handling The support can be accurately adjusted to requirements and safely released by fixing in three steps: To pre-adjust the ceiling prop, press the release button and extend the telescopic inner tube to the desired length. Fine adjustment is done by operating the pump handle until the installation plate of the support is in contact with the workpiece. Then turn the handle clockwise until the desired holding force is reached (note the maximum load capacity) by unlocking in two steps: First turn the ceiling punch anticlockwise. As soon as there is no more holding force, press the release button to retract the inner tube Safety instructions Read and observe the operating instructions. Do not exceed the specified maximum loads. You may only use the ceiling support and mounting bracket on flat and clean surfaces. The ceiling support and mounting bracket may not be loaded sideways. The ceiling support and mounting bracket may only be stretched by hand and without additional aids. You may only use use original BESSEY spare parts. Protect yourself with safety glasses and an assembly helmet. Material/Surface Upper and lower part made of reinforced PA6 plastic Steel tube, coated Lever made of reinforced PA6 plastic Protective caps made of plastic Maintenance Regular maintenance is necessary - only then can a secure grip be guaranteed (no slipping of the slide bar) Clean rails with solvent Clean and lubricate spindle regularly ds: dsc: kts: ceiling and mounting bracket 1700-3000mm kpn: STE 300 kpn_dash: kpn_clear: STE300 bkpn: BESSEY STE 300 bkpn_clear: BESSEY STE300 c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Telescopic support | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey telescopic support sr_no_br_cl_ns: STE300 sr_ns: BESSEYSTE300
r: 03178037 p: 49.545 pid: 154391 b: BESSEY q: 13 st: 1 lt: 1 ean: 4008158041278 sr: BESSEY STE370 sr_no_br: STE370 sr_no_br_cl: STE370 sr_cl: BESSEYSTE370 sr_dash: sold: 18034.38 p_range: none type: standard act: 1 avo: 1 av: Min. height 207 cm Max. height 370 cm Max. load capacity 350 kg n: BESSEY STE 370 ceiling and mounting bracket 2070-3700mm - STE370 cn: TELESCOPIC SUPPORT cn2: TELESCOPIC SUPPORT cn_clear: TELESCOPICSUPPORT d: Product description Load capacity up to 350 kg when fully retracted telescopic pole Extremely stable construction through high-load-bearing steel tubes and non-slip PVC contact surfaces (9 x 7 cm) One-hand operation thanks to 2-component plastic handle with pump mechanism Quick-release button for quickly retracting and extending the telescopic pole Adjustable holding force by turning the support on the handle Can also be used in inclined positions thanks to the contact surfaces, which can be tilted continuously from -45° to +45° GS-certified for quality and safety Extremely secure grip The support guarantees a reliable, secure grip through the extremely stable construction for a load capacity of up to 350 kg - depending on the support size and extension length through rubber PVC contact surfaces at the top and bottom through slip protection integrated in the handle Precise and fast handling The support can be accurately adjusted to requirements and safely released by fixing in three steps: To pre-adjust the ceiling prop, press the release button and extend the telescopic inner tube to the desired length. Fine adjustment is done by operating the pump handle until the installation plate of the support is in contact with the workpiece. Then turn the handle clockwise until the desired holding force is reached (note the maximum load capacity) by unlocking in two steps: First turn the ceiling punch anticlockwise. As soon as there is no more holding force, press the release button to retract the inner tube Safety instructions Read and observe the operating instructions. Do not exceed the specified maximum loads. You may only use the ceiling support and mounting bracket on flat and clean surfaces. The ceiling support and mounting bracket may not be loaded sideways. The ceiling support and mounting bracket may only be stretched by hand and without additional aids. You may only use use original BESSEY spare parts. Protect yourself with safety glasses and an assembly helmet. Material/Surface Upper and lower part made of reinforced PA6 plastic Steel tube, coated Lever made of reinforced PA6 plastic Protective caps made of plastic Maintenance Regular maintenance is necessary - only then can a secure grip be guaranteed (no slipping of the slide bar) Clean rails with solvent Clean and lubricate spindle regularly ds: dsc: kts: ceiling and mounting bracket 2070-3700mm kpn: STE 370 kpn_dash: kpn_clear: STE370 bkpn: BESSEY STE 370 bkpn_clear: BESSEY STE370 c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Telescopic support | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey telescopic support sr_no_br_cl_ns: STE370 sr_ns: BESSEYSTE370
r: 02610200 p: 29.586 pid: 69912 b: STANLEY q: 2 st: 1 lt: 1 ean: 3253561059322 sr: STANLEY STHT1-05932 sr_no_br: STHT1-05932 sr_no_br_cl: STHT105932 sr_cl: STANLEYSTHT105932 sr_dash: STANLEY STHT1 sold: 5000.034 p_range: none type: standard act: 1 avo: 1 av: Min. height 1140 mm Max. height 2895 mm n: STANLEY STHT1-05932 telescopic jib cn: TELESCOPIC SUPPORT cn2: TELESCOPIC SUPPORT cn_clear: TELESCOPICSUPPORT d: Product description Telescopic Bracket Features Heavy-duty ribbed aluminium construction for strength and durability Height adjustable from 1140mm - 2895mm (45 - 114) Efficient clamp holds panels firmly in place ds: dsc: kts: telescopic jib kpn: STHT1-05932 kpn_dash: STHT1 kpn_clear: STHT105932 bkpn: STANLEY STHT1-05932 bkpn_clear: STANLEY STHT105932 c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Telescopic support | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley clamping technology / Stanley clamping tools / Stanley telescopic support sr_no_br_cl_ns: STHT105932 sr_ns: STANLEYSTHT1-05932
r: 03327125 p: 33.719 pid: 163623 b: BESSEY q: 8 st: 1 lt: 1 ean: 4008158041841 sr: BESSEY STE90 sr_no_br: STE90 sr_no_br_cl: STE90 sr_cl: BESSEYSTE90 sr_dash: sold: 1921.983 p_range: none type: standard act: 1 avo: 1 av: Min. height 575 mm Max. height 910 mm Max. load capacity 350 kg n: BESSEY STE90 ceiling support and mounting bracket with pump handle 575-910 mm 350 kg cn: TELESCOPIC SUPPORT cn2: TELESCOPIC SUPPORT cn_clear: TELESCOPICSUPPORT d: Product description Load capacity up to 350 kg when fully retracted telescopic pole Extremely stable construction through high-load-bearing steel tubes and non-slip PVC contact surfaces (9 x 7 cm) One-hand operation thanks to 2-component plastic handle with pump mechanism Quick-release button for quickly retracting and extending the telescopic pole Adjustable holding force by turning the support on the handle Can also be used in inclined positions thanks to the contact surfaces, which can be tilted continuously from -45° to +45° Extremely secure grip The support guarantees a reliable, secure grip through the extremely stable construction for a load capacity of up to 350 kg - depending on the support size and extension length through rubber PVC contact surfaces at the top and bottom through slip protection integrated in the handle Precise and fast handling The support can be accurately adjusted to requirements and safely released by fixing in three steps: To pre-adjust the ceiling prop, press the release button and extend the telescopic inner tube to the desired length. Fine adjustment is done by operating the pump handle until the installation plate of the support is in contact with the workpiece. Then turn the handle clockwise until the desired holding force is reached (note the maximum load capacity) by unlocking in two steps: First turn the ceiling punch anticlockwise. As soon as there is no more holding force, press the release button to retract the inner tube Application areas Finishing construction Rough construction DIY Staircase construction Finishing Carpentry and timber frame construction Fixing and supporting in finishing One-man assembly Safety instructions Read and observe the operating instructions. The specified maximum loads must not be exceeded. You may only use the ceiling support and mounting bracket on flat and clean surfaces. The ceiling support and mounting bracket may not be loaded sideways. The ceiling bracket and mounting support may only be stretched by hand and without additional aids. You may only use original BESSEY spare parts. Protect yourself with safety glasses and an assembly helmet. Material/Surface Upper and lower part made of reinforced PA6 plastic Steel tube, coated Lever made of reinforced PA6 plastic Protective caps made of plastic Maintenance Clean rails with solvent Clean and lubricate spindle regularly ds: dsc: kts: ceiling support and mounting bracket with pump handle 575-910 mm 350 kg kpn: STE90 kpn_dash: kpn_clear: STE90 bkpn: BESSEY STE90 bkpn_clear: BESSEY STE90 c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Telescopic support | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey telescopic support sr_no_br_cl_ns: STE90 sr_ns: BESSEYSTE90
