Durable water and wind sealing, even in difficult places
Good adhesion to EPDM, tiles, metal roof materials
100% waterproof and UV-stable from 1 mm layer thickness
Permanently flexible and walkable
This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs
Can be applied horizontally and vertically to most roofing and building materials
Can also be applied on slightly damp substrates and is rainproof after 2 hours
Free of solvents and toxic substances
Instructions
Apply to clean and stable substrate, which may be slightly moist
Reinforce fragile or rusty surfaces with a coat of Poxy Primer
Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces (<4 m²)
Reinforce with fibreglass mesh
Apply with a brush or spatula, in one layer of at least 1 mm thickness
Clean tools immediately with Tec7 Cleaner and your hands with Powerwipes. After curing, remove only mechanically
A surplus can be stored for a short time provided the bag in the pot is sealed airtight and air-free
Test the adhesion on EPDM and plastics
Discolouration and/or loss of adhesion may occur on bituminous materials, but can be applied to roofing treated with slate chippings
Not suitable for permanent immersion
Consumption for 1 mm thickness: 1 litre/m². Consumption varies with substrate roughness
Key features according to our expert
Net volume: 4 l
Physical state: Solid
EUH-statements: EUH208
UN number: Not applicable
ADR class: Not applicable
ADR packing group: Not applicable
Supplemental hazard information
EUH208: Contains ... (see safety data sheet). May produce an allergic reaction.
