r: 11050095 p: 3.03 pid: 105757 b: RECTAVIT q: 15 st: 1 lt: 1 ean: 5412926951383 sr: RECTAVIT 117587 sr_no_br: 117587 sr_no_br_cl: 117587 sr_cl: RECTAVIT117587 sr_dash: sold: 539.34 p_range: none type: standard act: 1 avo: 1 av: Diameter 15 mm Length 85 mm Quantity per blister 5 n: RECTAVIT 117587 sieve sleeve for chemical anchoring in hollow substrates, 85 mm x 15 mm (5 pcs) cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description Injection sleeve for chemical anchoring in hollow substrates. Suitable for use with Chimfix. Available in plastic (85x15 mm) and in metal (1000x16 mm). Features Easy to use Specifically for hollow building materials Suitable for threaded rod m8-m10 ds: dsc: kts: sieve sleeve for chemical anchoring in hollow substrates, 85 mm x 15 mm (5 pcs) kpn: 117587 kpn_dash: kpn_clear: 117587 bkpn: RECTAVIT 117587 bkpn_clear: RECTAVIT 117587 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Rectavit / Rectavit fasteners and machine components / Rectavit fasteners / Rectavit anchoring / Rectavit strainer sleeve sr_no_br_cl_ns: 117587 sr_ns: RECTAVIT117587
r: 02021220 p: 0.48 pid: 1974 b: FISCHER q: 0 st: lt: 1 ean: 8001132419014 sr: FISCHER 41901 sr_no_br: 41901 sr_no_br_cl: 41901 sr_cl: FISCHER41901 sr_dash: sold: 216 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Length 85 mm n: FISCHER 41901 injection sleeve plastic FIS H 12x85 K cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 12x85 K kpn: 41901 kpn_dash: kpn_clear: 41901 bkpn: FISCHER 41901 bkpn_clear: FISCHER 41901 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer strainer sleeve sr_no_br_cl_ns: 41901 sr_ns: FISCHER41901
r: 02838889 p: 47.438 pid: 126479 b: SPIT q: 0 st: lt: 6 ean: 3439510558966 sr: SPIT 055896 sr_no_br: 055896 sr_no_br_cl: 055896 sr_cl: SPIT055896 sr_dash: sold: 189.752 p_range: none type: standard act: 1 avo: 1 av: Quantity per set 20 n: SPIT 055896 iD-ALL anchor (20 pcs.) + 4 short iD-ALL mixing nozzles cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description Complete fixing solution for hollow walls and hollow materials Works on all hollow and ill-defined materials (hollow blocks, hollow brick and solid materials) Effective: thanks to its 360° distribution, the iD-AL system fills the holes left in the material during drilling and guarantees perfect positioning Adjustable: the iD-ALL open-ended anchor can accommodate the full length of a rod Multiple positions: suitable in all hollow materials (hollow, joint, partitions...) Adaptable: iD-ALL adapts to all base materials and can be placed close to edges and even in the joint. Economical: only 5 gun injections required Fastening with excellent performance Suitable for threaded rods M6 to M10 Applications HVAC Blind Canopy Hand rail Water heating system Kitchen furniture Radiators Satellite dish ds: dsc: Scope of delivery 20 iD-ALL anchors + 4 short iD-ALL mixing nozzles kts: iD-ALL anchor (20 pcs.) + 4 short iD-ALL mixing nozzles kpn: 055896 kpn_dash: kpn_clear: 055896 bkpn: SPIT 055896 bkpn_clear: SPIT 055896 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit anchoring / Spit strainer sleeve sr_no_br_cl_ns: 055896 sr_ns: SPIT055896
r: 02380593 p: 5.72 pid: 121748 b: RECTAVIT q: 0 st: lt: 6 ean: 5411183085114 sr: RECTAVIT 117772 sr_no_br: 117772 sr_no_br_cl: 117772 sr_cl: RECTAVIT117772 sr_dash: sold: 171.6 p_range: none type: standard act: 1 avo: 1 av: Diameter 15 mm Length 1 m n: RECTAVIT 117772 sieve sleeve for chemical anchoring in hollow substrates, 85 mm x 15 mm cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description Injection sleeve for chemical anchoring in hollow substrates. Suitable for use with Chimfix. Available in plastic (85x15 mm) and in metal (1000x16 mm). Features Easy to use Specifically for hollow building materials Suitable for threaded rod m8-m10 ds: dsc: kts: sieve sleeve for chemical anchoring in hollow substrates, 85 mm x 15 mm kpn: 117772 kpn_dash: kpn_clear: 117772 bkpn: RECTAVIT 117772 bkpn_clear: RECTAVIT 117772 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Rectavit / Rectavit fasteners and machine components / Rectavit fasteners / Rectavit anchoring / Rectavit strainer sleeve sr_no_br_cl_ns: 117772 sr_ns: RECTAVIT117772
r: 02128818 p: 1.57 pid: 2519 b: FISCHER q: 0 st: lt: 7 ean: 4006209467039 sr: FISCHER 46703 sr_no_br: 46703 sr_no_br_cl: 46703 sr_cl: FISCHER46703 sr_dash: sold: 125.6 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Length 130 mm n: FISCHER 46703 injection sleeve plastic FIS H 20x130 K cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 20x130 K kpn: 46703 kpn_dash: kpn_clear: 46703 bkpn: FISCHER 46703 bkpn_clear: FISCHER 46703 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer strainer sleeve sr_no_br_cl_ns: 46703 sr_ns: FISCHER46703
r: 83994839 p: 0.57 pid: 5713 b: FISCHER q: 0 st: lt: 1 ean: 8001132419021 sr: FISCHER 41902 sr_no_br: 41902 sr_no_br_cl: 41902 sr_cl: FISCHER41902 sr_dash: sold: 114 p_range: none type: standard act: 1 avo: 1 av: Diameter 16 mm Length 85 mm n: FISCHER 41902 injection sleeve plastic FIS H 16x85 K cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 16x85 K kpn: 41902 kpn_dash: kpn_clear: 41902 bkpn: FISCHER 41902 bkpn_clear: FISCHER 41902 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer strainer sleeve sr_no_br_cl_ns: 41902 sr_ns: FISCHER41902
r: 02128819 p: 1.83 pid: 2928 b: FISCHER q: 0 st: lt: 8 ean: 4006209467046 sr: FISCHER 46704 sr_no_br: 46704 sr_no_br_cl: 46704 sr_cl: FISCHER46704 sr_dash: sold: 73.2 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Length 200 mm n: FISCHER 46704 injection sleeve plastic FIS H 20x200 K cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 20x200 K kpn: 46704 kpn_dash: kpn_clear: 46704 bkpn: FISCHER 46704 bkpn_clear: FISCHER 46704 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer strainer sleeve sr_no_br_cl_ns: 46704 sr_ns: FISCHER46704
