r: 02685320 p: 0.07 pid: 180739 b: SPAX q: 800 st: 1 lt: 1 ean: 4003530168055 sr: SPAX 1197000350303 sr_no_br: 1197000350303 sr_no_br_cl: 1197000350303 sr_cl: SPAX1197000350303 sr_dash: sold: 14 p_range: none type: standard act: 1 avo: 1 av: Diameter 3,5 mm Material (screw) Stainless steel Surface treatment (screw) Bright Head shape (screw) Countersunk type (screw head) T15 Drive type Torx Bolt/screw type Full thread Thread length 25 mm Length 30 mm n: SPAX 1197000350303 chipboard screw 3.5 x 30 mm full thread countersunk head T-STAR plus T15 stainless steel A2 cn: CHIPBOARD SCREW cn2: CHIPBOARD SCREW cn_clear: CHIPBOARDSCREW d: Product description: Flat countersunk head, T-STAR plus With MULTI Head and 4CUT, synthetic coating Stainless steel A2 II Application: Outdoor applications - Direct exposure to elements Advantage: In the long term, galvanised protective coatings frequently do not sufficiently protect steel screws against corrosion in outdoor areas. Rust is not just ugly but also expensive. In particular, if the quality of expensive products or components deteriorates and results in consequential damage.Costly reworks and repairs become necessary. Rust can be avoided. The SPAX rust-free stainless steel offers protection against corrosion. Special properties: Stainless steel A2 II: high corrosion protection T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: 4CUT: allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres Ground serrations: up to the point - quick and secure fastening MULTI Head: flush countersinking. Mills in wood and stops on metal ds: dsc: kts: chipboard screw 3.5 x 30 mm full thread countersunk head T-STAR plus T15 stainless steel A2 kpn: 1197000350303 kpn_dash: kpn_clear: 1197000350303 bkpn: SPAX 1197000350303 bkpn_clear: SPAX 1197000350303 c_path: Home / Fasteners and machine components / Fasteners / Screws / Chipboard screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax chipboard screw sr_no_br_cl_ns: 1197000350303 sr_ns: SPAX1197000350303
r: 02145799 p: 0.07 pid: 180338 b: SPAX q: 600 st: 1 lt: 1 ean: 4003530168437 sr: SPAX 0441010350403 sr_no_br: 0441010350403 sr_no_br_cl: 0441010350403 sr_cl: SPAX0441010350403 sr_dash: sold: 14 p_range: none type: standard act: 1 avo: 1 av: Diameter 3,5 mm Material Steel Surface treatment Wirox Head shape (bolt) Countersunk type (screw head) T15 Drive type Torx Bolt/screw type Partial wire Length 40 mm n: SPAX 0441010350403 MDF screw 3.5 x 40 mm countersunk head T-STAR plus T15 steel cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus Slim 75° milling head, SPAX CUT point, case hardened, synthetic coating Blue zinc plated A2J Application: Bolting fibreboards (MDF/HDF) Advantages: No pre-drilling (wood-dependent) thanks to special SPAX CUT point Effectively reduces splitting and bulging of the material Cut point screw in Special properties: Special SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting and bulging of the material Small 75° milling head: ensures flush countersinking Partial thread: firm tightening of the upper wood layer Blue zinc plated A2J T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening ds: dsc: kts: MDF screw 3.5 x 40 mm countersunk head T-STAR plus T15 steel kpn: 0441010350403 kpn_dash: kpn_clear: 0441010350403 bkpn: SPAX 0441010350403 bkpn_clear: SPAX 0441010350403 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 0441010350403 sr_ns: SPAX0441010350403
r: 02686058 p: 28.595 pid: 180886 b: SPAX q: 0 st: lt: 18 ean: 4003530182495 sr: SPAX 1208001205505 sr_no_br: 1208001205505 sr_no_br_cl: 1208001205505 sr_cl: SPAX1208001205505 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 550 mm n: SPAX 1208001205505 chipboard screw 12 x 550 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 12 x 550 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001205505 kpn_dash: kpn_clear: 1208001205505 bkpn: SPAX 1208001205505 bkpn_clear: SPAX 1208001205505 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001205505 sr_ns: SPAX1208001205505
r: 02681014 p: 25.578 pid: 180672 b: SPAX q: 0 st: lt: 18 ean: 4003530182266 sr: SPAX 1208001205005 sr_no_br: 1208001205005 sr_no_br_cl: 1208001205005 sr_cl: SPAX1208001205005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Material (screw) Stainless steel Head shape (screw) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 500 mm n: SPAX 1208001205005 chipboard screw 12 x 500 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: CHIPBOARD SCREW cn2: CHIPBOARD SCREW cn_clear: CHIPBOARDSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 12 x 500 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001205005 kpn_dash: kpn_clear: 1208001205005 bkpn: SPAX 1208001205005 bkpn_clear: SPAX 1208001205005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Chipboard screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax chipboard screw sr_no_br_cl_ns: 1208001205005 sr_ns: SPAX1208001205005
r: 02686059 p: 20.165 pid: 180874 b: SPAX q: 0 st: lt: 18 ean: 4003530182259 sr: SPAX 1208001204505 sr_no_br: 1208001204505 sr_no_br_cl: 1208001204505 sr_cl: SPAX1208001204505 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 450 mm n: SPAX 1208001204505 chipboard screw 12 x 450 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 12 x 450 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001204505 kpn_dash: kpn_clear: 1208001204505 bkpn: SPAX 1208001204505 bkpn_clear: SPAX 1208001204505 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001204505 sr_ns: SPAX1208001204505
r: 02686060 p: 16.198 pid: 180884 b: SPAX q: 0 st: lt: 18 ean: 4003530182242 sr: SPAX 1208001204005 sr_no_br: 1208001204005 sr_no_br_cl: 1208001204005 sr_cl: SPAX1208001204005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 400 mm n: SPAX 1208001204005 chipboard screw 12 x 400 mm countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 12 x 400 mm countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001204005 kpn_dash: kpn_clear: 1208001204005 bkpn: SPAX 1208001204005 bkpn_clear: SPAX 1208001204005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001204005 sr_ns: SPAX1208001204005
r: 02686073 p: 8.77 pid: 180888 b: SPAX q: 0 st: lt: 18 ean: 4003530182235 sr: SPAX 1208001004005 sr_no_br: 1208001004005 sr_no_br_cl: 1208001004005 sr_cl: SPAX1208001004005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 400 mm n: SPAX 1208001004005 chipboard screw 10 x 400 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 400 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001004005 kpn_dash: kpn_clear: 1208001004005 bkpn: SPAX 1208001004005 bkpn_clear: SPAX 1208001004005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001004005 sr_ns: SPAX1208001004005
r: 02686072 p: 6.92 pid: 180882 b: SPAX q: 0 st: lt: 18 ean: 4003530182228 sr: SPAX 1208001003505 sr_no_br: 1208001003505 sr_no_br_cl: 1208001003505 sr_cl: SPAX1208001003505 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 350 mm n: SPAX 1208001003505 chipboard screw 10 x 350 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 350 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001003505 kpn_dash: kpn_clear: 1208001003505 bkpn: SPAX 1208001003505 bkpn_clear: SPAX 1208001003505 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001003505 sr_ns: SPAX1208001003505
r: 02686071 p: 5.35 pid: 180894 b: SPAX q: 0 st: lt: 18 ean: 4003530182341 sr: SPAX 1208001003005 sr_no_br: 1208001003005 sr_no_br_cl: 1208001003005 sr_cl: SPAX1208001003005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 300 mm n: SPAX 1208001003005 chipboard screw 10 x 300 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 300 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001003005 kpn_dash: kpn_clear: 1208001003005 bkpn: SPAX 1208001003005 bkpn_clear: SPAX 1208001003005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001003005 sr_ns: SPAX1208001003005
r: 02686070 p: 4.71 pid: 180900 b: SPAX q: 0 st: lt: 18 ean: 4003530182334 sr: SPAX 1208001002805 sr_no_br: 1208001002805 sr_no_br_cl: 1208001002805 sr_cl: SPAX1208001002805 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 280 mm n: SPAX 1208001002805 chipboard screw 10 x 280 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 280 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001002805 kpn_dash: kpn_clear: 1208001002805 bkpn: SPAX 1208001002805 bkpn_clear: SPAX 1208001002805 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001002805 sr_ns: SPAX1208001002805
r: 03242223 p: 4.47 pid: 181150 b: SPAX q: 0 st: lt: 11 ean: 4003530257452 sr: SPAX 0257000803005 sr_no_br: 0257000803005 sr_no_br_cl: 0257000803005 sr_cl: SPAX0257000803005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Material Stainless steel A2 Surface treatment Bright Head shape (bolt) Flange type (screw head) T40 Drive type Torx Bolt/screw type Partial wire Length 300 mm n: SPAX 0257000803005 construction screw 8 x 300 mm countersunk head T-STAR plus T40 stainless steel A2 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description The discus head can withstand higher head traction forces, saving numbers and working hours Application: outdoors (e.g. carports, pergolas, canopies, bridges, plank bridge decks, balconies) High holding forces are especially important for screwing stairs, wooden building elements and lathing on roofs and walls. That is what our universal screw with discus head and split thread offers. The large SPAX discus head pulls two building elements together with great force. In the process, the optimised pin thread is matched to the high load-bearing capacity of the discus head. We have adapted the shaft length to the most common timber thicknesses. Thanks to the interplay of large discus head and optimised pin thread, the screw diameter can be reduced (5 mm instead of 6 mm) with the same load capacity. This naturally benefits the penetration speed. This means for you: smaller screws are sufficient for the same application, you save weight, time and costs. ds: dsc: kts: construction screw 8 x 300 mm countersunk head T-STAR plus T40 stainless steel A2 kpn: 0257000803005 kpn_dash: kpn_clear: 0257000803005 bkpn: SPAX 0257000803005 bkpn_clear: SPAX 0257000803005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 0257000803005 sr_ns: SPAX0257000803005
r: 02686068 p: 4.36 pid: 180901 b: SPAX q: 0 st: lt: 18 ean: 4003530182327 sr: SPAX 1208001002605 sr_no_br: 1208001002605 sr_no_br_cl: 1208001002605 sr_cl: SPAX1208001002605 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 260 mm n: SPAX 1208001002605 chipboard screw 10 x 260 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 260 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001002605 kpn_dash: kpn_clear: 1208001002605 bkpn: SPAX 1208001002605 bkpn_clear: SPAX 1208001002605 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001002605 sr_ns: SPAX1208001002605
r: 02686066 p: 4.12 pid: 180873 b: SPAX q: 0 st: lt: 18 ean: 4003530178689 sr: SPAX 1208001002405 sr_no_br: 1208001002405 sr_no_br_cl: 1208001002405 sr_cl: SPAX1208001002405 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 240 mm n: SPAX 1208001002405 chipboard screw 10 x 240 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 240 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001002405 kpn_dash: kpn_clear: 1208001002405 bkpn: SPAX 1208001002405 bkpn_clear: SPAX 1208001002405 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001002405 sr_ns: SPAX1208001002405
r: 03242222 p: 3.95 pid: 181080 b: SPAX q: 0 st: lt: 11 ean: 4003530257445 sr: SPAX 0257000802805 sr_no_br: 0257000802805 sr_no_br_cl: 0257000802805 sr_cl: SPAX0257000802805 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Material Stainless steel A2 Surface treatment Bright Head shape (bolt) Flange type (screw head) T40 Drive type Torx Bolt/screw type Partial wire Length 280 mm n: SPAX 0257000802805 construction screw 8 x 280 mm countersunk head T-STAR plus T40 stainless steel A2 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description The discus head can withstand higher head traction forces, saving numbers and working hours Application: outdoors (e.g. carports, pergolas, canopies, bridges, plank bridge decks, balconies) High holding forces are especially important for screwing stairs, wooden building elements and lathing on roofs and walls. That is what our universal screw with discus head and split thread offers. The large SPAX discus head pulls two building elements together with great force. In the process, the optimised pin thread is matched to the high load-bearing capacity of the discus head. We have adapted the shaft length to the most common timber thicknesses. Thanks to the interplay of large discus head and optimised pin thread, the screw diameter can be reduced (5 mm instead of 6 mm) with the same load capacity. This naturally benefits the penetration speed. What this means for you: smaller screws are sufficient for the same application, you save weight, time and costs. ds: dsc: kts: construction screw 8 x 280 mm countersunk head T-STAR plus T40 stainless steel A2 kpn: 0257000802805 kpn_dash: kpn_clear: 0257000802805 bkpn: SPAX 0257000802805 bkpn_clear: SPAX 0257000802805 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 0257000802805 sr_ns: SPAX0257000802805
r: 03242220 p: 3.72 pid: 181147 b: SPAX q: 0 st: lt: 11 ean: 4003530257438 sr: SPAX 0257000802605 sr_no_br: 0257000802605 sr_no_br_cl: 0257000802605 sr_cl: SPAX0257000802605 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Material Stainless steel A2 Surface treatment Bright Head shape (bolt) Flange type (screw head) T40 Drive type Torx Bolt/screw type Partial wire Length 260 mm n: SPAX 0257000802605 construction screw 8 x 260 mm countersunk head T-STAR plus T40 stainless steel A2 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description The discus head can withstand higher head traction forces, saving numbers and working hours Application: outdoors (e.g. carports, pergolas, canopies, bridges, plank bridge decks, balconies) High holding forces are especially important for screwing stairs, wooden building elements and lathing on roofs and walls. That is what our universal screw with discus head and split thread offers. The large SPAX discus head pulls two building elements together with great force. In the process, the optimised pin thread is matched to the high load-bearing capacity of the discus head. We have adapted the shaft length to the most common timber thicknesses. Thanks to the interplay of large discus head and optimised pin thread, the screw diameter can be reduced (5 mm instead of 6 mm) with the same load capacity. This naturally benefits the penetration speed. This means for you: smaller screws are sufficient for the same application, you save weight, time and costs. ds: dsc: kts: construction screw 8 x 260 mm countersunk head T-STAR plus T40 stainless steel A2 kpn: 0257000802605 kpn_dash: kpn_clear: 0257000802605 bkpn: SPAX 0257000802605 bkpn_clear: SPAX 0257000802605 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 0257000802605 sr_ns: SPAX0257000802605
r: 03242219 p: 3.48 pid: 181169 b: SPAX q: 0 st: lt: 11 ean: 4003530257421 sr: SPAX 0257000802405 sr_no_br: 0257000802405 sr_no_br_cl: 0257000802405 sr_cl: SPAX0257000802405 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Material Stainless steel A2 Surface treatment Bright Head shape (bolt) Flange type (screw head) T40 Drive type Torx Bolt/screw type Partial wire Length 240 mm n: SPAX 0257000802405 construction screw 8 x 240 mm countersunk head T-STAR plus T40 stainless steel A2 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description The discus head can withstand higher head traction forces, saving numbers and working hours Application: outdoors (e.g. carports, pergolas, canopies, bridges, plank bridge decks, balconies) High holding forces are especially important for screwing stairs, wooden building elements and lathing on roofs and walls. That is what our universal screw with discus head and split thread offers. The large SPAX discus head pulls two building elements together with great force. In the process, the optimised pin thread is matched to the high load-bearing capacity of the discus head. We have adapted the shaft length to the most common timber thicknesses. Thanks to the interplay of large discus head and optimised pin thread, the screw diameter can be reduced (5 mm instead of 6 mm) with the same load capacity. This naturally benefits the penetration speed. This means for you: smaller screws are sufficient for the same application, you save weight, time and costs. ds: dsc: kts: construction screw 8 x 240 mm countersunk head T-STAR plus T40 stainless steel A2 kpn: 0257000802405 kpn_dash: kpn_clear: 0257000802405 bkpn: SPAX 0257000802405 bkpn_clear: SPAX 0257000802405 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 0257000802405 sr_ns: SPAX0257000802405
r: 02686064 p: 3.48 pid: 180878 b: SPAX q: 0 st: lt: 18 ean: 4003530182310 sr: SPAX 1208001002205 sr_no_br: 1208001002205 sr_no_br_cl: 1208001002205 sr_cl: SPAX1208001002205 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Material Stainless steel Surface treatment Bright Head shape (bolt) Countersunk type (screw head) T50 Drive type Torx Bolt/screw type Full thread Length 220 mm n: SPAX 1208001002205 chipboard screw 10 x 220 mm full thread countersunk head T-STAR plus T50 stainless steel A4 cn: TIMBER CONSTRUCTION SCREW cn2: TIMBER CONSTRUCTION SCREW cn_clear: TIMBERCONSTRUCTIONSCREW d: Product description: Flat countersunk head, T-STAR plus With milling ribs and SPAX CUT point, synthetic coating Stainless steel A4 III Application: Lateral pressure reinforcement Flexibly connected bending beams Lateral tension reinforcements Advantages: Absorption of high tensile and compressive forces by being fully threaded Absorption of particularly high pulling forces compared to partial threaded screws Wide spectrum of applications through screw lengths of up to 600 mm Cost-effective alternative to bolt connections, formed metal sheet parts and lateral reinforcement through glued on reinforcement panels or glued in threaded bars Approved by building authorities: Under Z-9.1-519 as wood connector Special properties: SPAX CUT point: precision placement, allows screwing in without pre-drilling (wood-dependent), effectively reduces splitting of the wood Full thread: absorption of high tensile and compressive forces Stainless steel A4 III: Permanent protection against corrosion T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: SPAX typical ground serrations: quick and secure fastening Flat countersunk head SPAX-RA with milling ribs: clean, flush sinking of the head ds: dsc: kts: chipboard screw 10 x 220 mm full thread countersunk head T-STAR plus T50 stainless steel A4 kpn: 1208001002205 kpn_dash: kpn_clear: 1208001002205 bkpn: SPAX 1208001002205 bkpn_clear: SPAX 1208001002205 c_path: Home / Fasteners and machine components / Fasteners / Screws / Timber construction screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax timber construction screw sr_no_br_cl_ns: 1208001002205 sr_ns: SPAX1208001002205
