r: 03177351 p: 5.8 pid: 94099 b: SOUDAL q: 0 st: lt: 8 ean: 5411183039049 sr: SOUDAL 126615 sr_no_br: 126615 sr_no_br_cl: 126615 sr_cl: SOUDAL126615 sr_dash: sold: 527.8 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 10 m Material Acrylic Thickness 3-12 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 15/3-12 mm - 126615 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 15/3-12 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126615 sr_ns: SOUDAL126615
r: 08085281 p: 1.338 pid: 105684 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180062 sr: SOUDAL 157832 sr_no_br: 157832 sr_no_br_cl: 157832 sr_cl: SOUDAL157832 sr_dash: sold: 171.264 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 8 m Thickness 5-12 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/5-12 - 157832 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/5-12 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157832 sr_ns: SOUDAL157832
r: 08085272 p: 0.996 pid: 105669 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179882 sr: SOUDAL 157814 sr_no_br: 157814 sr_no_br_cl: 157814 sr_cl: SOUDAL157814 sr_dash: sold: 167.328 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 8 m Thickness 5-12 mm n: SOUDAL Soudaband PRO BG1 sealing tape 15/5-12 - 157814 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 15/5-12 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157814 sr_ns: SOUDAL157814
r: 08085276 p: 1.974 pid: 105678 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179929 sr: SOUDAL 157810 sr_no_br: 157810 sr_no_br_cl: 157810 sr_cl: SOUDAL157810 sr_dash: sold: 126.336 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 4 m Thickness 10-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/10-20 - 157810 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157810 sr_ns: SOUDAL157810
r: 08085255 p: 0.517 pid: 107009 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180239 sr: SOUDAL 157842 sr_no_br: 157842 sr_no_br_cl: 157842 sr_cl: SOUDAL157842 sr_dash: sold: 124.08 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 15 m Thickness 1-4 mm n: SOUDAL Soudaband PRO BG1 20/1-4 sealing tape black - 157842 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape black kpn: Soudaband PRO BG1 20/1-4 kpn_dash: Soudaband PRO BG1 20/1 kpn_clear: SoudabandPROBG12014 bkpn: SOUDAL Soudaband PRO BG1 20/1-4 bkpn_clear: SOUDAL SoudabandPROBG12014 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157842 sr_ns: SOUDAL157842
r: 03069584 p: 2.99 pid: 95198 b: SOUDAL q: 0 st: lt: 8 ean: 5411183039018 sr: SOUDAL 126612 sr_no_br: 126612 sr_no_br_cl: 126612 sr_cl: SOUDAL126612 sr_dash: sold: 116.61 p_range: none type: standard act: 1 avo: av: Width 10 mm Roll length 12,5 m Material Acrylic Thickness 2-8 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 10/2-8 mm - 126612 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 10/2-8 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126612 sr_ns: SOUDAL126612
r: 03162275 p: 7.37 pid: 93375 b: SOUDAL q: 0 st: lt: 8 ean: 5411183039063 sr: SOUDAL 126617 sr_no_br: 126617 sr_no_br_cl: 126617 sr_cl: SOUDAL126617 sr_dash: sold: 103.18 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 8 m Material Acrylic Thickness 4-16 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 20/4-16 mm - 126617 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 20/4-16 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126617 sr_ns: SOUDAL126617
r: 03095349 p: 3.54 pid: 95201 b: SOUDAL q: 0 st: lt: 10 ean: 5411183099555 sr: SOUDAL 126618 sr_no_br: 126618 sr_no_br_cl: 126618 sr_cl: SOUDAL126618 sr_dash: sold: 56.64 p_range: none type: standard act: 1 avo: av: Width 10 mm Roll length 8 m Material Acrylic Thickness 4-16 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 10/4-16 mm - 126618 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 10/4-16 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126618 sr_ns: SOUDAL126618
r: 02334874 p: 32.41 pid: 93365 b: SOUDAL q: 0 st: lt: 8 ean: 5411183112643 sr: SOUDAL 123885 sr_no_br: 123885 sr_no_br_cl: 123885 sr_cl: SOUDAL123885 sr_dash: sold: 0 p_range: none act: 1 avo: av: Width 150 mm Roll length 25 m Material Butyl n: SOUDAL 123885 SWS Inside sealing tape butyl 150mm (25m tape) cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: VAPOUR OPEN membrane for external window to wall joints. Can be plastered or covered with an outside insulation system (ETICS type). Self-adhesive strip for use on the window side and a butyl based adhesive strip connects the tape to the building envelope. Characteristics: Vapour open membrane Can be plastered Self adhesive strip Butyl based adhesive strip Exterior use Applications: Used for external vapour open sealing between the window frame and the building substrate. Used in conjunction with SWS Inside Tape as a system. Supplied in various widths. ds: dsc: kts: SWS Inside sealing tape butyl 150mm (25m tape) kpn: 123885 kpn_dash: kpn_clear: 123885 bkpn: SOUDAL 123885 bkpn_clear: SOUDAL 123885 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 123885 sr_ns: SOUDAL123885
r: 03226163 p: 11.05 pid: 4581 b: SOUDAL q: 0 st: lt: 8 ean: 5411183039025 sr: SOUDAL 126613 sr_no_br: 126613 sr_no_br_cl: 126613 sr_cl: SOUDAL126613 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 10 mm Roll length 10 m Material Acrylic Thickness 3-12 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 10/3-12 mm - 126613 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 10/3-12 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126613 sr_ns: SOUDAL126613
