Effortless bearing removal in confined spaces
- Powerful hydraulic extraction: The integrated hydraulic spindle allows you to apply up to 100 kN pulling force with minimal effort.
- Access in tight gaps: The specialized separator blades of this Skf set slip easily behind bearings where standard jaws cannot fit.
- Extended reach versatility: You quickly adapt the pulling setup up to 816 mm reach using the included extension rods.
With the Skf tmbs 100E strong back puller kit, you remove tightly fitted bearings effortlessly and without damage in spaces where standard jaw pullers cannot fit. The specialised separator blades slide easily between the bearing and the shaft shoulder on shaft diameters from 20 to 100 mm. Powered by the included tmhs 100 hydraulic spindle, you generate up to 100 kN of pulling force with an 80 mm stroke. Using the supplied extension rods, you can extend your reach up to 816 mm. This ensures fast, safe, and controlled bearing extraction during maintenance and overhaul tasks.
Scope of delivery
- 1 x separator set
- 1 x beam
- 2 x main rods
- 4 x extension rods, 285 mm
- 2 x extension rods, 125 mm
- 1 x hydraulic spindle TMHS 100 (with handle bar)
- 2 x extension pieces for hydraulic spindle
- 50, 100 mm
- 1 x nosepiece with centre point for hydraulic spindle
- IFU QR Code card
- Case
Product description
The SKF TMBS 100E strong back puller facilitates dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated with a hydraulic spindle for effortless dismounting up to 100 kN (11.2 US ton). A special separator design is used that can be easily inserted between the bearing and the shoulder on the shaft.
- Easily separator placement between bearing and shoulder on the shaft
- Spring-loaded centre point of spindle allows easy puller centring and minimises the risk of shaft damage
- Hydraulic spindle with safety valve for safe and effortless dismounting
- Firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
- Quick adaptation to required pulling length with 2x hydraulic spindle extension pieces and extension rods for pullings lengths up to 816 mm (32.1 in.)