What type of lubricant is included in this unit?

The cartridge is pre-filled with 125 ml of SKF LGWA 2 high-load and extreme-pressure grease.

How do you adjust the dispense rate?

You can adjust the discharge period from 1 to 12 months tool-free using the top dial.

What is the connection thread size on the LAGD 125/WA2?

The lubricator has an R 1/4 male thread for direct installation onto the lubrication point.

Is this lubricator approved for hazardous areas?

Yes, this gas-driven single-point lubricator is ATEX certified for zone 0 environments.

Can the lubricant discharge be stopped after activation?

Yes, the dispensing rate can be temporarily stopped or adjusted whenever required.

SKF LAGD 125/WA2 gas-powered automatic single-point lubrication system with LGWA 2 grease 125 ml

Supplier number: SKF LAGD 125/WA2 | EAN 7316570087178

35.40 tax incl.

€29.26 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Ordered before 20:00 - delivered as of 16/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable automatic lubrication from Skf

Practical benefits

Flexible and precise dispense: You easily adjust the delivery rate from 1 to 12 months for continuous protection.
Ready straight from box: Pre-filled with 125 ml of LGWA 2 grease suited for heavy loads and extreme pressure.
Easy visual inspection: The transparent housing lets you check lubricant levels and progress immediately.

In a nutshell

The right choise for

With the Skf System 24 lagd 125/WA2 gas-driven single-point automatic lubricator, you ensure continuous and reliable operation for electric motors, pumps, fans, and conveyors. Pre-filled with 125 ml of lgwa 2 multi-purpose grease, it delivers dependable protection against heavy loads, extreme pressure, and wide temperature variations. You can easily adjust the dispense rate from 1 to 12 months using the top dial without tools, or pause dispensing whenever necessary. The transparent housing allows immediate visual inspection of the lubricant level. With an r 1/4 connection thread and atex zone 0 certification, you safely install it directly onto hard-to-reach or hazardous lubrication points.

Product information FAQ

€35.40

In stock - tax incl.

Key features according to our expert

Product description

The SKF SYSTEM 24 LAGD 125/WA2 is filled with SKF LGWA 2 grease for wide temperature ranges and extreme pressures, recommended for electric motors, conveyors, fans and pumps. Our gas driven single point automatic lubricators are available in many configurations, pre-filled with SKF lubricants or empty, suitable for filling with oil. With tool-free activation and time-setting they allow easy, safe and accurate relubrication.

Flexible dispense rate from 1 to 12 months
ATEX zone 0 approved
Transparent lubricant container allows visual inspection of dispense rate
Compact size, suitable for restrictive areas
Improved reliability and optimized maintenance

Documents

⤓ Technical data sheet PDF

All Features

Power source: Gas cell
Maximum pressure: 5
Nominal emptying time: 1-12
Recommended storage temperature: 20 °C
Lubricant quantity: 125
Recommended applications: Fans and electric motors;Conveyor head and tail pulley bearings
Ambient temperature range: -20-60
Connecting thread: R 1/4
Intrinsically safe approval: II 1G Ex ia IIC T6 Ga, II 1D Ex ia IIIC T200 85°C Da, I M1 Ex ia I Ma
Lubricant operating temperature range: -30 to +140 °C
Lubricant description: Wide temperature range, extreme pressure, high load bearing grease
Degree of protection (ip): IP 68
Shelf life: 2
Lubricant: LGWA 2
Drive mechanism: Gas cell producing inert gas
Maximum feed line length: 0.3

Brand SKF
01900112
EAN 7316570087178
Supplier number SKF LAGD 125/WA2

Frequently asked questions about this product

Answered by specialists

What type of lubricant is included in this unit?: The cartridge is pre-filled with 125 ml of SKF LGWA 2 high-load and extreme-pressure grease.
How do you adjust the dispense rate?: You can adjust the discharge period from 1 to 12 months tool-free using the top dial.
What is the connection thread size on the LAGD 125/WA2?: The lubricator has an R 1/4 male thread for direct installation onto the lubrication point.
Is this lubricator approved for hazardous areas?: Yes, this gas-driven single-point lubricator is ATEX certified for zone 0 environments.
Can the lubricant discharge be stopped after activation?: Yes, the dispensing rate can be temporarily stopped or adjusted whenever required.