Combo Pack Deals! Free Makita Battery⚡ Discover! Read more
Click for more items in this promotion! Read less
skf_g18x26x4
skf_g18x26x4_2
skf_g18x26x4
skf_g18x26x4_2

SKF G 18X26X4 radial shaft seal 18 mm x 26 mm x 4 mm

Supplier number: SKF G 18X26X4 | EAN 7316570970197
11.31 tax incl.
€9.35 excl. VAT (incl. all environmental contributions)
On stock - immediately available | we have 7 products in stock.

The minimum purchase order quantity for the product is 25.

  • Ordered before 20:00 - delivered tomorrow 21/11/2026
  • Free shipping
  • Delivery by DHL

Compact protection for needle roller assemblies

Practical benefits
  • Low radial cross section: A slim 4 mm width fits into tight bearing spaces without demanding excess housing room.
  • Reinforced steel casing design: The internal steel reinforcement provides rigidity, while the rubber outer diameter seals firmly without scoring the bore.
  • Dependable Skf barrier seal: Tough nbr rubber retains internal grease and blocks contaminants across the 18 mm shaft surface.

In a nutshell

The right choise for

When space around needle roller bearings is strictly limited, the Skf g 18X26X4 radial shaft seal delivers dependable protection. Built with an 18 mm inside diameter, a 26 mm outside diameter, and a slim 4 mm width, it fits tight bearing seats where standard seals cannot. It retains grease within the assembly while locking out abrasive dust.

Featuring the springless g design with a single contact lip, this seal uses durable nbr rubber. An internal sheet steel reinforcement maintains rigidity, while the rubber outer diameter seals firmly without scoring the bore. Press the seal squarely into position using a fitting sleeve to prevent lip deformation.



€11.31
In stock - tax incl.

Product information

Key features according to our expert

  • Inner diameter: 18 mm
  • Outer diameter: 26 mm
  • Width: 4 mm

Product description:

  • Radial shaft seals are trailing seals used particularly for sealing oil-lubricated bearings.
  • These ready-to-use elastomer seals usually have a metal reinforcement or housing
  • The sealing lip is usually a nitrile rubber and is normally pressed against a contact surface on the shaft by means of a spring
  • Depending on the seal material and the medium to be kept in or out, radial shaft seals can be used at temperatures between 60 and +190 °C
  • The contact area between the seal lip and the contact surface is vital for the effectiveness of the seal
  • The surface hardness of the contact surface should normally be at least 55 HRC, and the depth of hardening should be at least 0.3 mm
  • Surface roughness according to ISO 4288:1996 should be within the guidelines of Ra = 0.2 to 0.8 mm
  • In applications with low speeds, good lubrication and minimal contamination, a lower hardness can be used
  • To prevent pumping of spiral grinding grooves, insert grinding is recommended
  • If the radial shaft seal is to keep the lubricant inside the bearing housing, the seal should be mounted with the lip inwards
  • If the main task is to keep out contaminants, the lip should point outwards

Documents

All Features

Inner diameter
18 mm
Outer diameter
26 mm
Width
4 mm
Shaft diameter
18 mm
Unit system
Metric
Seal width
4 mm
Sealing lip material
Acrylonitrile-butadiene rubber (NBR)
Auxiliary lip
No
Housing bore diameter
26 mm
  • Brand SKF
  • EAN 7316570970197
  • Supplier number SKF G 18X26X4

Frequently asked questions about this product

Answered by specialists
What are the exact dimensions of this Skf shaft seal?
This radial seal has an inside diameter of 18 mm, an outside diameter of 26 mm, and a width of 4 mm.
What applications is the Skf g design intended for?
This low cross-sectional height seal is specifically designed for bearing arrangements with needle roller bearings.
Does this radial seal include a garter spring?
No, Skf g design seals are manufactured without a garter spring and feature a single contact lip.
What material is this shaft seal made of?
The seal is made of nbr rubber reinforced internally with sheet steel.
How do you properly install this Skf seal?
Press the seal evenly into the housing bore using a suitable fitting sleeve to prevent lip deformation.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.