r: 08074558 p: 12.28 pid: 28135 b: WIHA q: 0 st: lt: 7 ean: 4010995411428 sr: WIHA 41142 sr_no_br: 41142 sr_no_br_cl: 41142 sr_cl: WIHA41142 sr_dash: sold: 147.36 p_range: KLIUM_PRODUCT_RANGE_341 type: standard act: 1 avo: 1 av: Drive size T15H Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Torx Tamper Resistant Product Range Wiha SoftFinish n: WIHA 3251TR015 screwdriver SoftFinish electric slimFix Torx Tamper Resistant T15H x 100 mm - 41142 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Simplifies your work: Equipped with just one TORX profile for all types of use. Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws. Product dimensions: 211 x 30 x 30 mm (LxWxD) Application: For work in the area of live parts up to 1,000 V AC. Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs Wiha handle size concept - powerful and sensitive fastening SlimBits allow access to low-lying screws thanks to inserted insulation Safe operation up to 1,000 V AC Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. Manufactured acc. to IEC 60900. ds: dsc: kts: screwdriver SoftFinish electric slimFix Torx Tamper Resistant T15H x 100 mm kpn: 3251TR015 kpn_dash: kpn_clear: 3251TR015 bkpn: WIHA 3251TR015 bkpn_clear: WIHA 3251TR015 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha screwdrivers and bits / Wiha screwdrivers / Wiha screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha softfinish sr_no_br_cl_ns: 41142 sr_ns: WIHA41142
r: 02606092 p: 6.13 pid: 68927 b: STANLEY q: 0 st: lt: 8 ean: 3253561653377 sr: STANLEY 1-65-337 sr_no_br: 1-65-337 sr_no_br_cl: 165337 sr_cl: STANLEY165337 sr_dash: STANLEY 1 sold: 147.12 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Drive size PZ2 Drive type Pozidriv Blade length 125 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Product Range Stanley Fatmax n: STANLEY 1-65-337 FATMAX screwdriver Pozidriv PZ2 x 125mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description FatMax Screwdriver Pozidriv PZ2 X 125mm Features Handle formed directly on the blade - virtually unbreakable High-quality steel blade - high resistance and reduced risk of tip breakage Ergonomic handle - bimaterial, non-slip, excellent grip and reduces fatigue Large-diameter handle - sufficient torque for wood screws - and narrow neck - for quick turning Rounded end of handle - for comfortable and smooth turning movements Colour coded BLUE - quick identification of the right screwdriver for each type of screw ds: STANLEY PICK & MIX, BUY & GET FOR FREE Receive a free STANLEY FATMAX gift when purchasing at least 2 STANLEY items. The higher your order value, the greater the benefit. Promotion valid from 01.09.2026 to 30.09.2026 or while stocks last. How does it work? Purchase at least 2 STANLEY items during the promotion period. With an order value of €135 to €199 excl. VAT , you will receive the STANLEY FATMAX Hard Shell knee pads (art. no. 03049972) free of charge. With an order value of €199 excl. VAT or more , you will receive the STANLEY FATMAX 18" open tool bag (art. no. 02047349) free of charge. The free gift will be added directly to your order. No additional registration is required. Promotion valid from 01.09.2026 to 30.09.2026 or while stocks last. STANLEY Pick & Mix deals are recognisable by the promotion label on the product page. Click the label to discover all available deals. dsc: kts: FATMAX screwdriver Pozidriv PZ2 x 125mm kpn: 1-65-337 kpn_dash: 1 kpn_clear: 165337 bkpn: STANLEY 1-65-337 bkpn_clear: STANLEY 165337 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley screwdrivers and bits / Stanley screwdrivers / Stanley screwdriver | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: 165337 sr_ns: STANLEY1-65-337
r: 02750343 p: 12.231 pid: 45982 b: WERA q: 0 st: lt: 10 ean: 4013288160249 sr: WERA 05006461001 sr_no_br: 05006461001 sr_no_br_cl: 05006461001 sr_cl: WERA05006461001 sr_dash: sold: 146.772 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv n: WERA 165 iS PZ VDE insulated Pozidriv screwdriver, reduced-diameter blade, PZ 2 x 100 mm - 05006461001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter, so that even sunken screws can be easily reached. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. the hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Reduced shaft diameter Application Suitable for Pozidriv screws Blade Reduced blade diameter with integrated protective insulation, allows sunken PZ screws to be accessed and actuated, individually tested as per IEC 60900 Design Blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 165 iS PZ VDE Insulated screwdriver with reduced blade diameter for Pozidriv screws, PZ 2 x 100 mm kts: VDE insulated Pozidriv screwdriver, reduced-diameter blade, PZ 2 x 100 mm kpn: 165 iS PZ kpn_dash: kpn_clear: 165iSPZ bkpn: WERA 165 iS PZ bkpn_clear: WERA 165iSPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006461001 sr_ns: WERA05006461001
r: 02468271 p: 9.752 pid: 45828 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108340 sr: WERA 05029465001 sr_no_br: 05029465001 sr_no_br_cl: 05029465001 sr_cl: WERA05029465001 sr_dash: sold: 146.28 p_range: none type: standard act: 1 avo: 1 av: Width across flats 10 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 202 mm Blade length 90 mm VDE approved No n: WERA 395 cap screwdriver hollow shank 10.0 x 90 mm - 05029465001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera insert wrench screwdriver with hollow shaft for screwdriving on thread rods, because only then can the thread rod penetrate through the bolt into the hollow shaft of the screwdriver. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With hexagon anti-roll protection against rolling away. Handles marked for easy identification and sorting of tools. For external hexagon screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Hollow shaft for protruding threaded rods, chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Hollow shaft for protruding threaded rods, chrome-plated Handle Kraftform with non-roll feature, multi-component TIP The hollow shaft enables seized screws or those on long threads to be tightened and loosened Features and benefits Hollow shaft for protruding threaded rods A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 HO Nutdriver, 10 x 90 mm kts: cap screwdriver hollow shank 10.0 x 90 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029465001 sr_ns: WERA05029465001
r: 41960494 p: 9.14 pid: 70634 b: WERA q: 0 st: lt: 7 ean: 4013288032089 sr: WERA 05118062001 sr_no_br: 05118062001 sr_no_br_cl: 05118062001 sr_cl: WERA05118062001 sr_dash: sold: 146.24 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 0,9 mm Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 0.9 x 40 mm - 05118062001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 0.9 x 40 mm kts: Kraftform hexagonal screwdriver, 0.9 x 40 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118062001 sr_ns: WERA05118062001
r: 41852077 p: 7.31 pid: 51539 b: BAHCO q: 2 st: 1 lt: 1 ean: 7314151838706 sr: BAHCO BE-8601 sr_no_br: BE-8601 sr_no_br_cl: BE8601 sr_cl: BAHCOBE8601 sr_dash: BAHCO BE sold: 146.2 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size PH1 Blade length 25 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Bahco ERGO n: BAHCO BE-8601 screwdriver ERGO with three-component handle stubby Phillips PH1 x 25 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for Phillips head screws, stubby type for working in confined spaces Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ISO 8764 / DIN 5260 ds: dsc: kts: screwdriver ERGO with three-component handle stubby Phillips PH1 x 25 mm kpn: BE-8601 kpn_dash: BE kpn_clear: BE8601 bkpn: BAHCO BE-8601 bkpn_clear: BAHCO BE8601 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8601 sr_ns: BAHCOBE-8601
r: 02831963 p: 29.09 pid: 17800 b: WERA q: 0 st: lt: 8 ean: 4013288106025 sr: WERA 05073541001 sr_no_br: 05073541001 sr_no_br_cl: 05073541001 sr_cl: WERA05073541001 sr_dash: sold: 145.45 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Non-sparking No n: WERA 817 R SB SiS bit holder with Rapidaptor quick-change chuck, 1/4" x 133 mm - 05073541001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description High quality bit holder. The telescopic bayonet blade, which can be lowered into the handle, together with the quick-release chuck allows fast manual work even in confined installation situations. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits absolutely securely. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Retractable bayonet blade For insertion in the power screwdriver or for use in the chuck of an electric drill Rapidaptor technology for rapid bit change Multi-component Kraftform handle for ergonomic screwdriving For bits with 1/4" hex head drive as per DIN ISO 1173-C 6.3 and E 6.3 Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Drive 2 position telescopic blade, can be retracted into the handle for confined space operation or extended for more reach, can also be removed and used as a 100mm bit holder in the power tool, 1/4" hexagon suitable for power tools with DIN ISO 1173-F 6.3 chuck Design 1/4" hexagon with Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, magnetic Handle Kraftform with non-roll feature, multi-component Features and benefits When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 817 R SB Bitholding screwdriver with Rapidaptor quick-release chuck, 1/4" x 133 mm kts: bit holder with Rapidaptor quick-change chuck, 1/4" x 133 mm kpn: 817 R SB SiS kpn_dash: kpn_clear: 817RSBSiS bkpn: WERA 817 R SB SiS bkpn_clear: WERA 817RSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05073541001 sr_ns: WERA05073541001
r: 41852086 p: 10.24 pid: 49462 b: BAHCO q: 0 st: lt: 7 ean: 7314151838812 sr: BAHCO BE-7920 sr_no_br: BE-7920 sr_no_br_cl: BE7920 sr_cl: BAHCOBE7920 sr_dash: BAHCO BE sold: 143.36 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size T20 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Bahco ERGO n: BAHCO BE-7920 screwdriver ERGO with three-component handle Tamper-Resistant TORX TR20 x 100 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for TORX® and TORX® tamper resistant head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ds: dsc: kts: screwdriver ERGO with three-component handle Tamper-Resistant TORX TR20 x 100 mm kpn: BE-7920 kpn_dash: BE kpn_clear: BE7920 bkpn: BAHCO BE-7920 bkpn_clear: BAHCO BE7920 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE7920 sr_ns: BAHCOBE-7920
r: 02745232 p: 3.67 pid: 73787 b: BAHCO q: 0 st: lt: 7 ean: 7314150242825 sr: BAHCO BE-8002 sr_no_br: BE-8002 sr_no_br_cl: BE8002 sr_cl: BAHCOBE8002 sr_dash: BAHCO BE sold: 143.13 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 60 mm Blade thickness 0,3 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Bahco ERGO n: BAHCO BE-8002 screwdriver ERGO with three-component handle straight tip slot 0.3 mm x 2 mm x 60 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for slotted head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ISO 2380 / DIN 5264 ds: dsc: kts: screwdriver ERGO with three-component handle straight tip slot 0.3 mm x 2 mm x 60 mm kpn: BE-8002 kpn_dash: BE kpn_clear: BE8002 bkpn: BAHCO BE-8002 bkpn_clear: BAHCO BE8002 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8002 sr_ns: BAHCOBE-8002
r: 41851288 p: 11.9 pid: 51119 b: BAHCO q: 0 st: lt: 7 ean: 7314150047796 sr: BAHCO BE-8260 sr_no_br: BE-8260 sr_no_br_cl: BE8260 sr_cl: BAHCOBE8260 sr_dash: BAHCO BE sold: 142.8 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Blade length 175 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Bahco ERGO n: BAHCO BE-8260 screwdriver ERGO with three-component handle double handle slot 1.6 mm x 8 mm x 175 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for slotted head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ISO 2380 / DIN 5264 Hexagon profile blade and bolster for wrench assisted turning ds: dsc: kts: screwdriver ERGO with three-component handle double handle slot 1.6 mm x 8 mm x 175 mm kpn: BE-8260 kpn_dash: BE kpn_clear: BE8260 bkpn: BAHCO BE-8260 bkpn_clear: BAHCO BE8260 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8260 sr_ns: BAHCOBE-8260
r: 02229297 p: 9.421 pid: 58387 b: BAHCO q: 0 st: lt: 7 ean: 7314153010919 sr: BAHCO BE-8823 sr_no_br: BE-8823 sr_no_br_cl: BE8823 sr_cl: BAHCOBE8823 sr_dash: BAHCO BE sold: 141.315 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size PZ3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv Product Range Bahco ERGO n: BAHCO BE-8823 screwdriver ERGO with three-component handle Pozidriv PZ3 x 36 x 150 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for Pozidriv head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ISO 8764 ds: dsc: kts: screwdriver ERGO with three-component handle Pozidriv PZ3 x 36 x 150 mm kpn: BE-8823 kpn_dash: BE kpn_clear: BE8823 bkpn: BAHCO BE-8823 bkpn_clear: BAHCO BE8823 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8823 sr_ns: BAHCOBE-8823
r: 41851282 p: 10.86 pid: 49228 b: BAHCO q: 2 st: 1 lt: 1 ean: 7314150010721 sr: BAHCO BE-8155 sr_no_br: BE-8155 sr_no_br_cl: BE8155 sr_cl: BAHCOBE8155 sr_dash: BAHCO BE sold: 141.18 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size Slotted 6,5 mm Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Bahco ERGO n: BAHCO BE-8155 screwdriver ERGO with three-component handle flat tip slotted 1.2 mm x 6.5 mm x 125 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for slotted head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ISO 2380 / DIN 5264 ds: dsc: kts: screwdriver ERGO with three-component handle flat tip slotted 1.2 mm x 6.5 mm x 125 mm kpn: BE-8155 kpn_dash: BE kpn_clear: BE8155 bkpn: BAHCO BE-8155 bkpn_clear: BAHCO BE8155 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8155 sr_ns: BAHCOBE-8155
