Ridgid straight and spiral pipe reamers from 1/8" to 4" plus spare cones
Ridgid pipe reamers remove the inner burr left after you cut steel pipe, so the flow stays clear and the die head or fitting seats properly. Installers use them straight after cutting, before they put a thread on the pipe.
There are two shapes. A straight reamer has a cone with straight cutting edges and works with a short turning motion, handy for smaller diameters and for quick work in series. A spiral reamer pulls itself into the pipe along its spiral and cuts more smoothly, which takes less force on larger diameters. Choose the model by the range you ream every day: from 1/8" to 2", from 1/4" to 2", from 3/8" to 3" or from 2 1/2" to 4".
A worn cone does not mean replacing the whole reamer: spare cones exist for models 2, 2-S, 3 and 254 and fit the handle you already have. If you thread with the 535 thread cutter, a model 341 reamer construction mounts on the machine itself. The reamers are part of Ridgid sanding, sharpening, polishing and deburring.
- For diameter: 3-50 mm