r: 03210223 p: 2122.337 pid: 111102 b: RIDGID q: 0 st: lt: 10 ean: 0095691670984 sr: RIDGID 67098 sr_no_br: 67098 sr_no_br_cl: 67098 sr_cl: RIDGID67098 sr_dash: sold: 8489.348 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number UN3481 Weight 3,2 kg Number of batteries included 1 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Pistol Battery type Li-ion Max. capacity (kN) 32 kN Capacity (battery) 2,5 Ah n: RIDGID RP 350-B 18V cordless pressing tool with V15-22-28 jaws in case (1x 2.5Ah battery + charger) - 67098 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RIDGID RP 350 has a brushless motor capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless rotation over 360°. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. The brushless RP 350 offers great performance (faster presses), higher efficiency (more presses per load), safer operation (no sparks, no overheating), more durability (no brushes to wear out) and an extremely long life cycle (reaching more than 100,000 press cycles). Thanks to the brushless motor technology combined with an advanced hydraulic system, the RP 350 can reach more than 100,000 press cycles without any scheduled maintenance during its lifetime. There is no service interval, no periodic service requirement and no work interruption. Infinite head rotation (> 360°) for endless flexibility on the job site. Pressing from any angle! Not 1 but 12 LEDs efficiently illuminate the darkest work locations. Safety first! RP 350 only works when the bolt is fully locked. Now with wireless technology and special button design. The exclusive RIDGID sensor monitors and confirms each individual press cycle. For your peace of mind! Pressing 54 mm stainless steel in just 5 seconds? Only with the RP 350/RP 351 without brushes! ds: dsc: Scope of delivery RP 350-B 32 kN press tool with pistol grip 56513 - 18 V 2.5 Ah advanced lithium battery 56523 - 230V quick charger (incl. car charger cable) 69858 - RP 350 carrying case 83106 - V15 pressing jaws 83126 - V22 pressing jaws 83136 - V28 pressing jaws kts: 18V cordless pressing tool with V15-22-28 jaws in case (1x 2.5Ah battery + charger) kpn: RP 350-B kpn_dash: RP 350 kpn_clear: RP350B bkpn: RIDGID RP 350-B bkpn_clear: RIDGID RP350B c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 67098 sr_ns: RIDGID67098
r: 03353790 p: 1517.047 pid: 158285 b: RIDGID q: 0 st: lt: 14 ean: 0095691782687 sr: RIDGID 78268 sr_no_br: 78268 sr_no_br_cl: 78268 sr_cl: RIDGID78268 sr_dash: sold: 6068.188 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 12 V Rotation angle (head) 360° UN number UN3481 Weight 1,62 kg Number of batteries included 2 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 24 kN Capacity (battery) 2,5 Ah n: RIDGID RP 251 12V cordless pressing tool with V-jaws in case (2x 2.5Ah battery + charger) - 78268 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RP 251 is the latest innovative tool within the RIDGID family of compact pressing tools. The ergonomic design with the forward-mounted trigger and SlimGrip lever allows one-handed use, so you can easily work on overhead lines and in confined spaces. Get better access and performance thanks to features such as head swivel over 360°, bright LEDs and a brushless motor capable of delivering more than 60,000 press cycles.The RP 251 can be used with all jaws, washers and actuators in the RIDGID compact series and can press up to 35 mm on copper and stainless steel and up to 32 mm on PEX tubes/multi-layer pipes. Total access - Endless swivelling of the head over 360° for reaching confined spaces from virtually any angle Performance - Brushless motor can perform more than 60,000 press cycles and requires no scheduled maintenance. Effortless operation - Lightweight, ergonomic, inline design with a forward-mounted trigger and SlimGrip lever allow easy one-handed operation. The RP 251's lower weight helps reduce fatigue and improves efficiency. Enhanced visibility - Improved LED light ring for clear visibility in dark conditions Bluetooth® connectivity - Access tool information such as number of press cycles, tool lock, service interval, battery status and more with the free RIDGID Link app Persistent - Completes up to 140 press cycles per charge with 12V Li-Ion battery ds: dsc: Scope of delivery Carrying case for RP 251 pressing tool (78328) V15 pressing jaws (22598) V22 pressing jaws (22613) V28 pressing jaws (22618R) 2x 12V 2.5Ah Lithium battery (55183) 1x battery charger (55198) kts: 12V cordless pressing tool with V-jaws in case (2x 2.5Ah battery + charger) kpn: RP 251 kpn_dash: kpn_clear: RP251 bkpn: RIDGID RP 251 bkpn_clear: RIDGID RP251 c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 78268 sr_ns: RIDGID78268
r: 08122612 p: 1387.626 pid: 165555 b: RIDGID q: 0 st: lt: 5 ean: 0095691698537 sr: RIDGID 69853 sr_no_br: 69853 sr_no_br_cl: 69853 sr_cl: RIDGID69853 sr_dash: sold: 4162.878 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number Number of batteries included 0 Type of system case Supplied in Case Weight 3,12 kg With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 32 kN n: RIDGID RP 351 18V cordless press tool 32kN in case (without battery and charger) - 69853 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description New RIDGID motor technology without brushes: The RP 351 without brushes offers great performance, higher efficiency, safer operation (no sparks), more durability and an extremely long life cycle (reaching more than 100,000 pressing cycles). Capacity from 12 to 108 mm for copper, steel and stainless steel No service interval: Thanks to brushless motor technology combined with an advanced hydraulic system, the RP 350 can reach more than 100,000 pressing cycles without any scheduled maintenance during its service life. Infinite head rotation: Infinite head rotation (>360°) for endless flexibility on the work site. Integrated on-site lighting: Not 1 but 12 LEDs efficiently illuminate the darkest work sites. Bolt sensor plus: Safety first! RP 351 only operates when the bolt is fully locked. Press-CHECK! The exclusive RIDGID sensor monitors and confirms each individual press cycle. Full access to electricity: Use the RP 351 with RIDGID 18 V Li-Ion batteries or with 18 V batteries from the Makita LXT series. Smart generation: Bluetooth 5.0 provides many SMART Tool capabilities accessible via the free app RIDGID Link. ds: dsc: Scope of delivery RP 351 pressing machine 69858 - carrying case kts: 18V cordless press tool 32kN in case (without battery and charger) kpn: RP 351 kpn_dash: kpn_clear: RP351 bkpn: RIDGID RP 351 bkpn_clear: RIDGID RP351 c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 69853 sr_ns: RIDGID69853
r: 03210244 p: 2056.138 pid: 111111 b: RIDGID q: 0 st: lt: 8 ean: 0095691671080 sr: RIDGID 67108 sr_no_br: 67108 sr_no_br_cl: 67108 sr_cl: RIDGID67108 sr_dash: sold: 4112.276 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number UN3481 Weight 3,2 kg Number of batteries included 1 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Pistol Battery type Li-ion Max. capacity (kN) 32 kN Capacity (battery) 2,5 Ah n: RIDGID RP 350-B 18V cordless pressing tool with TH 16-20-26 jaws in case (1x 2.5Ah battery + charger) - 67108 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RIDGID RP 350 has a brushless motor capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless rotation over 360°. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. The brushless RP 350 offers great performance (faster presses), higher efficiency (more presses per load), safer operation (no sparks, no overheating), more durability (no brushes to wear out) and an extremely long life cycle (reaching more than 100,000 press cycles). Thanks to the brushless motor technology combined with an advanced hydraulic system, the RP 350 can reach more than 100,000 press cycles without any scheduled maintenance during its lifetime. There is no service interval, no periodic service requirement and no work interruption. Infinite head rotation (> 360°) for endless flexibility on the job site. Pressing from any angle! Not 1 but 12 LEDs efficiently illuminate the darkest work locations. Safety first! RP 350 only works when the bolt is fully locked. Now with wireless technology and special button design. The exclusive RIDGID sensor monitors and confirms each individual press cycle. For your peace of mind! Pressing 54 mm stainless steel in just 5 seconds? Only with the RP 350/RP 351 without brushes! ds: dsc: Scope of delivery RP 350-B 32 kN press tool with pistol grip 56513 - 18 V 2.5 Ah advanced lithium battery 56523 - 230V quick charger (incl. car charger cable) 69858 - RP 350 carrying case 86546 - TH 16 mm standard jaw 86566 - TH 20 mm standard jaw 86576 - TH 26 mm standard jaw kts: 18V cordless pressing tool with TH 16-20-26 jaws in case (1x 2.5Ah battery + charger) kpn: RP 350-B kpn_dash: RP 350 kpn_clear: RP350B bkpn: RIDGID RP 350-B bkpn_clear: RIDGID RP350B c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 67108 sr_ns: RIDGID67108
r: 03203648 p: 1786.51 pid: 111095 b: RIDGID q: 0 st: lt: 8 ean: 0095691670885 sr: RIDGID 67088 sr_no_br: 67088 sr_no_br_cl: 67088 sr_cl: RIDGID67088 sr_dash: sold: 3573.02 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number UN3481 Weight 3,2 kg Number of batteries included 1 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Pistol Battery type Li-ion Max. capacity (kN) 32 kN Capacity (battery) 2,5 Ah n: RIDGID RP 350-B 18V cordless pressing tool without pressing jaws in case (1x 2.5Ah battery + charger) - 67088 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RIDGID RP 350 has a brushless motor capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless rotation over 360°. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. The brushless RP 350 offers great performance (faster presses), higher efficiency (more presses per load), safer operation (no sparks, no overheating), more durability (no brushes to wear out) and an extremely long life cycle (reaching more than 100,000 press cycles). Thanks to the brushless motor technology combined with an advanced hydraulic system, the RP 350 can reach more than 100,000 press cycles without any scheduled maintenance during its lifetime. There is no service interval, no periodic service requirement and no work interruption. Infinite head rotation (> 360°) for endless flexibility on the job site. Pressing from any angle! Not 1 but 12 LEDs efficiently illuminate the darkest work locations. Safety first! RP 350 only works when the bolt is fully locked. Now with wireless technology and special button design. The exclusive RIDGID sensor monitors and confirms each individual press cycle. For your peace of mind! Pressing 54 mm stainless steel in just 5 seconds? Only with the RP 350/RP 351 without brushes! ds: dsc: Scope of delivery RP 350-B 32 kN press tool with pistol grip 56513 - 18 V 2.5 Ah advanced lithium battery 56523 - 230V quick charger (incl. car charger cable) 69858 - RP 350 carrying case kts: 18V cordless pressing tool without pressing jaws in case (1x 2.5Ah battery + charger) kpn: RP 350-B kpn_dash: RP 350 kpn_clear: RP350B bkpn: RIDGID RP 350-B bkpn_clear: RIDGID RP350B c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 67088 sr_ns: RIDGID67088
r: 03308351 p: 1542.171 pid: 111163 b: RIDGID q: 0 st: lt: 8 ean: 0095691672636 sr: RIDGID 67263 sr_no_br: 67263 sr_no_br_cl: 67263 sr_cl: RIDGID67263 sr_dash: sold: 3084.342 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number Weight 3,12 kg Number of batteries included 0 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 32 kN n: RIDGID RP351-C 18V cordless pressing tool with 220 V adapter in case (without battery and charger) - 67263 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RP 351 press machine with inline design is designed for fast and uninterrupted work in the most confined spaces. Optimally balanced for one-handed operation and reduced fatigue on the work site. RP 351, driven by the new brushless RIDGID motor technology, achieves more than 100,000 press cycles and requires no scheduled maintenance. ds: dsc: Scope of delivery 69798 - pressing tool 43338 - 220 V mains adapter (5 m cable) 69858 - RP 350 carrying case kts: 18V cordless pressing tool with 220 V adapter in case (without battery and charger) kpn: RP351-C kpn_dash: RP351 kpn_clear: RP351C bkpn: RIDGID RP351-C bkpn_clear: RIDGID RP351C c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 67263 sr_ns: RIDGID67263
r: 03352883 p: 1519.609 pid: 158279 b: RIDGID q: 0 st: lt: 8 ean: 0095691782786 sr: RIDGID 78278 sr_no_br: 78278 sr_no_br_cl: 78278 sr_cl: RIDGID78278 sr_dash: sold: 3039.218 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 12 V Rotation angle (head) 360° UN number UN3481 Weight 1,62 kg Number of batteries included 2 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 24 kN Capacity (battery) 2,5 Ah n: RIDGID RP 251 12V cordless pressing tool with TH jaws in case (2x 2.5Ah battery + charger) - 78278 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RP 251 is the latest innovative tool within the RIDGID family of compact pressing tools. The ergonomic design with its forward-mounted trigger and SlimGrip lever allows one-handed use, so you can easily work on overhead lines and in confined spaces. Get better access and performance thanks to features such as head swivel over 360°, bright LEDs and a brushless motor capable of delivering more than 60,000 press cycles.The RP 251 can be used with all jaws, washers and actuators in the RIDGID compact series and can press up to 35 mm on copper and stainless steel and up to 32 mm on PEX tubes/multi-layer pipes. Total access - Endless swivelling of the head over 360° for reaching confined spaces from virtually any angle Performance - Brushless motor can perform more than 60,000 press cycles and requires no scheduled maintenance. Effortless operation - Lightweight, ergonomic, inline design with a forward-mounted trigger and SlimGrip lever allow easy one-handed operation. The RP 251's lower weight helps reduce fatigue and improves efficiency. Enhanced visibility - Improved LED light ring for clear visibility in dark conditions Bluetooth® connectivity - Access tool information such as number of press cycles, tool lock, service interval, battery status and more with the free RIDGID Link app Persistent - Completes up to 140 press cycles per charge with 12V Li-Ion battery ds: dsc: Scope of delivery Carrying case for RP 251 pressing tool (78328) TH16 pressing jaws (24713) TH20 pressing jaws (24723) TH26 pressing jaws (24728) 2x 12V 2.5Ah Lithium battery (55183) 1x battery charger (55198) kts: 12V cordless pressing tool with TH jaws in case (2x 2.5Ah battery + charger) kpn: RP 251 kpn_dash: kpn_clear: RP251 bkpn: RIDGID RP 251 bkpn_clear: RIDGID RP251 c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 78278 sr_ns: RIDGID78278
r: 08122608 p: 2056.593 pid: 165524 b: RIDGID q: 0 st: lt: 8 ean: 0095691698230 sr: RIDGID 69823 sr_no_br: 69823 sr_no_br_cl: 69823 sr_cl: RIDGID69823 sr_dash: sold: 2056.593 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number UN3481 Weight 3,2 kg Number of batteries included 1 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Pistol Battery type Li-ion Max. capacity (kN) 32 kN Capacity (battery) 2,5 Ah n: RIDGID RP 350-B 18V cordless pressing tool 32kN with M15-M22-M28 pressing jaws in case (1x 2.5Ah battery + charger) - 69823 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RIDGID RP 350 has a brushless motor capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless rotation over 360°. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. The brushless RP 350 offers great performance (faster presses), higher efficiency (more presses per load), safer operation (no sparks, no overheating), more durability (no brushes to wear out) and an extremely long life cycle (reaching more than 100,000 press cycles). Thanks to the brushless motor technology combined with an advanced hydraulic system, the RP 350 can reach more than 100,000 press cycles without any scheduled maintenance during its lifetime. There is no service interval, no periodic service requirement and no work interruption. Infinite head rotation (> 360°) for endless flexibility on the job site. Pressing from any angle! Not 1 but 12 LEDs efficiently illuminate the darkest work locations. Safety first! RP 350 only works when the bolt is fully locked. Now with wireless technology and special button design. The exclusive RIDGID sensor monitors and confirms each individual press cycle. For your peace of mind! Pressing 54 mm stainless steel in just 5 seconds? Only with the RP 350/RP 351 without brushes! ds: dsc: Scope of delivery 69798 - RP 350 pressing machine 56513 - 18 V 2.5 Ah advanced lithium battery 56523 - 230V quick charger (incl. car charger cable) 69858 - RP 350 carrying case 69873 - M15 pressing jaw 69883 - M22 pressing jaw 69888 - M28 pressing jaw kts: 18V cordless pressing tool 32kN with M15-M22-M28 pressing jaws in case (1x 2.5Ah battery + charger) kpn: RP 350-B kpn_dash: RP 350 kpn_clear: RP350B bkpn: RIDGID RP 350-B bkpn_clear: RIDGID RP350B c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 69823 sr_ns: RIDGID69823
r: 03262979 p: 1970.519 pid: 109809 b: RIDGID q: 0 st: lt: 15 ean: 0095691757982 sr: RIDGID 75798 sr_no_br: 75798 sr_no_br_cl: 75798 sr_cl: RIDGID75798 sr_dash: sold: 1970.519 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 350° UN number UN3481 Weight 3,8 kg Type of system case Number of batteries included 1 Supplied in Case With rotatable head Yes Shape (handle) Pistol Battery type Li-ion Max. capacity (kN) 32 kN Capacity (battery) 5 Ah n: RIDGID RP 352-XL 18V cordless pressing tool in case (1x 5.0Ah battery + charger) - 75798 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description One-Shot XL press - Presses 66.7 to 108 mm M-profile fittings in just one press cycle and without using a 2nd actuator, with unmatched efficiency. Fast FWD XL press - 108 mm M-press in just 12 sec; with RIDGID Fast-FWD press technology. QuickSwitch stroke - Easy switching between XL and smaller sizes. No second tool needed for small-diameter pressing. Safe pressing with Press-CHECK! - The integrated pressure sensor monitors and confirms every pressing action. Warns in case of a malfunction... For your peace of mind! Ergonomics at a higher level - Lightest XL tool with pistol grip weighing only 3.8 kg. Offers ultimate tool balance and user comfort. Advanced electronics - Instant access to tool and usage information via Bluetooth (with free RIDGID Link app) and the integrated OLED screen. 350° head rotation - 350° head rotation allowing the user to press from virtually any angle. Multiple power sources - The RP 352-XL offers complete flexibility with full power access! Use the RP 352-XL with RIDGID 18 V Li-Ion batteries, corded power adapter (5 m cable) or with compatible Makita LXT series 18 V batteries. 32 kN-XL press rings (66.7-108.0 mm) - RIDGID 32 kN-XL press rings feature the unique 4-segment technology, which enables fully synchronised press connection and easiest/quickest fitting/dismounting of the press rings. The innovative chain lock provides extra safety, easily absorbs high pressure and prevents slipping out of the fitting. ds: dsc: Scope of delivery Carrying case for RP 352-XL (75763) 18V 5.0 Ah Li-Ion battery (56518) 230 V quick charger (56523) Power adapter (for corded use) (43338) kts: 18V cordless pressing tool in case (1x 5.0Ah battery + charger) kpn: RP 352-XL kpn_dash: RP 352 kpn_clear: RP352XL bkpn: RIDGID RP 352-XL bkpn_clear: RIDGID RP352XL c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 75798 sr_ns: RIDGID75798
r: 08122613 p: 1786.51 pid: 165554 b: RIDGID q: 0 st: lt: 10 ean: 0095691672285 sr: RIDGID 67228 sr_no_br: 67228 sr_no_br_cl: 67228 sr_cl: RIDGID67228 sr_dash: sold: 1786.51 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number UN3481 Number of batteries included 1 Type of system case Supplied in Case Weight 3,12 kg With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 32 kN Capacity (battery) 2,5 Ah n: RIDGID RP 351-B 18V cordless press tool 32kN in case (1x 2.5Ah battery + charger) - 67228 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RP 351 press machine with inline design is designed for fast and uninterrupted work in the most confined spaces. Optimally balanced for one-handed operation and reduced fatigue on the work site. RP 351, driven by the new brushless RIDGID motor technology, achieves more than 100,000 press cycles and requires no scheduled maintenance. ds: dsc: Scope of delivery RP 351 pressing tool 56513 - 18 V 2.5 Ah advanced lithium battery 56523 - 230V quick charger (incl. car charger cable) 69858 - carrying case kts: 18V cordless press tool 32kN in case (1x 2.5Ah battery + charger) kpn: RP 351-B kpn_dash: RP 351 kpn_clear: RP351B bkpn: RIDGID RP 351-B bkpn_clear: RIDGID RP351B c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 67228 sr_ns: RIDGID67228
r: 03210225 p: 1542.626 pid: 111484 b: RIDGID q: 0 st: lt: 8 ean: 0095691671233 sr: RIDGID 67123 sr_no_br: 67123 sr_no_br_cl: 67123 sr_cl: RIDGID67123 sr_dash: sold: 1542.626 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 360° UN number Weight 3,2 kg Number of batteries included 0 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Pistol Battery type Li-ion Max. capacity (kN) 32 kN n: RIDGID RP 350-C 18V cordless press tool 32kN in case (incl. power adapter with 5m cable) - 67123 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RIDGID RP 350 has a brushless motor capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless rotation over 360°. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. The brushless RP 350 offers great performance (faster presses), higher efficiency (more presses per load), safer operation (no sparks, no overheating), more durability (no brushes to wear out) and an extremely long life cycle (reaching more than 100,000 press cycles). Thanks to the brushless motor technology combined with an advanced hydraulic system, the RP 350 can reach more than 100,000 press cycles without any scheduled maintenance during its lifetime. There is no service interval, no periodic service requirement and no work interruption. Infinite head rotation (> 360°) for endless flexibility on the job site. Pressing from any angle! Not 1 but 12 LEDs efficiently illuminate the darkest work locations. Safety first! RP 350 only works when the bolt is fully locked. Now with wireless technology and special button design. The exclusive RIDGID sensor monitors and confirms each individual press cycle. For your peace of mind! Pressing 54 mm stainless steel in just 5 seconds? Only with the RP 350/RP 351 without brushes! ds: dsc: Scope of delivery RP 350-C 32 kN press tool with pistol grip 43338 - 220 V mains adapter (5 m cable) 69858 - RP 350 carrying case kts: 18V cordless press tool 32kN in case (incl. power adapter with 5m cable) kpn: RP 350-C kpn_dash: RP 350 kpn_clear: RP350C bkpn: RIDGID RP 350-C bkpn_clear: RIDGID RP350C c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 67123 sr_ns: RIDGID67123
r: 08122606 p: 1391.138 pid: 165558 b: RIDGID q: 0 st: lt: 10 ean: 0095691690883 sr: RIDGID 69088 sr_no_br: 69088 sr_no_br_cl: 69088 sr_cl: RIDGID69088 sr_dash: sold: 1391.138 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 350° UN number UN3481 Number of batteries included 1 Type of system case Supplied in Case Weight 1,48 kg With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 19 kN Capacity (battery) 2,5 Ah n: RIDGID RP 219 18V cordless pressing tool 19kN with V15-18-22 pressing jaws in case (1x 2.5Ah battery + charger) - 69088 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description Up to 35 mm copper/stainless steel and 40 mm plastic (PEX) and multilayer material.The RP 219 is our Next-Gen compact 19 kN pressing tool, which, thanks to its low weight (< 2 kg), ultra-thin inline design and fully flexible 350° rotating head, gives the user FULL ACCESS in even the tightest spaces. The RP 219 also allows users to press super fast (3-4 sec) and has access to important tool information, multiple power sources and a wide range of compact 19 kN pressing jaws. Another feature of the RP 219 is the 'Press-CHECK!', an integrated pressure sensor that monitors and confirms every press cycle and, with a service interval of 32,000 press cycles with no time limit, offers the lowest cost of ownership. Lightweight inline design - The RP 219's ultra-thin inline design allows you to work even in seemingly inaccessible places. Weighing less than 2 kg, the RP 219 is also the ideal tool for carrying out 'effortless' taxing overhead work. 350° swivel head - 350° swivel head so the user can press from almost any angle. OLED display and Bluetooth - Provides full access to important tool information such as number of press cycles, service interval, operating time, press pressure, battery status, tool warnings, etc. thanks to the integrated high-visibility OLED display and Bluetooth connection to the free app RIDGID Link. SPEED-Press! - The RP 219 offers a press speed of just 3 seconds (cycle time). So you'll have a press connection up and running in no time. FULL-SPEED-Press - Offers full flexibility with FULL-SPEED-Press! Use the RP 219 with RIDGID 18 V Li-Ion batteries, with the corded power adapter (5 m cable) or with compatible 18 V batteries from the Makita LXT series. Wide range of pressing jaws - The RP 219 comes with a wide range of 19 kN pressing jaws and profiles, from the M&V profiles (maximum 35 mm) for metal connections to TH, U, G and RF (maximum 40 mm) for plastic and multilayer systems. Press-CHECK! - The RP 219 has an integrated pressure sensor, which checks the most essential aspect of your pressing task: enough pressure build-up and a press connection that is 100% reliable. With the RP 219, every press cycle is monitored and you receive an alert in case of a failure. ds: dsc: Scope of delivery 56513 - 18V 2.5 Ah advanced lithium battery 56523 - 230V quick charger (incl. car charger cable) 69063 - carrying case 69193 - V15 pressing jaws 69203 - V18 pressing jaws 69208 - V22 pressing jaws kts: 18V cordless pressing tool 19kN with V15-18-22 pressing jaws in case (1x 2.5Ah battery + charger) kpn: RP 219 kpn_dash: kpn_clear: RP219 bkpn: RIDGID RP 219 bkpn_clear: RIDGID RP219 c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 69088 sr_ns: RIDGID69088
r: 03353798 p: 1273.246 pid: 158291 b: RIDGID q: 0 st: lt: 10 ean: 0095691783189 sr: RIDGID 78318 sr_no_br: 78318 sr_no_br_cl: 78318 sr_cl: RIDGID78318 sr_dash: sold: 1273.246 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 12 V Rotation angle (head) 360° UN number UN3481 Weight 1,62 kg Number of batteries included 2 Supplied in Case Type of system case With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 24 kN Capacity (battery) 2,5 Ah n: RIDGID RP 251 12V battery-pressing tool in case (2x 2.5Ah battery + charger) - 78318 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description The RP 251 is the latest innovative tool within the RIDGID family of compact pressing tools. The ergonomic design with its forward-mounted trigger and SlimGrip lever allows one-handed use, so you can easily work on overhead lines and in confined spaces. Get better access and performance thanks to features such as head swivel over 360°, bright LEDs and a brushless motor capable of delivering more than 60,000 press cycles.The RP 251 can be used with all jaws, washers and actuators in the RIDGID compact series and can press up to 35 mm on copper and stainless steel and up to 32 mm on PEX tubes/multi-layer pipes. Total access - Endless swivelling of the head over 360° for reaching confined spaces from virtually any angle Performance - Brushless motor can perform more than 60,000 press cycles and requires no scheduled maintenance. Effortless operation - Lightweight, ergonomic, inline design with a forward-mounted trigger and SlimGrip lever allow easy one-handed operation. The RP 251's lower weight helps reduce fatigue and improves efficiency. Enhanced visibility - Improved LED light ring for clear visibility in dark conditions Bluetooth® connectivity - Access tool information such as number of press cycles, tool lock, service interval, battery status and more with the free RIDGID Link app Persistent - Completes up to 140 press cycles per charge with 12V Li-Ion battery ds: dsc: Scope of delivery Carrying case for RP 251 pressing tool (78328) 2x 12V 2.5Ah lithium battery (55183) 1x battery charger (55198) kts: 12V battery-pressing tool in case (2x 2.5Ah battery + charger) kpn: RP 251 kpn_dash: kpn_clear: RP251 bkpn: RIDGID RP 251 bkpn_clear: RIDGID RP251 c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 78318 sr_ns: RIDGID78318
r: 08122602 p: 890.105 pid: 165548 b: RIDGID q: 0 st: lt: 8 ean: 0095691690685 sr: RIDGID 69068 sr_no_br: 69068 sr_no_br_cl: 69068 sr_cl: RIDGID69068 sr_dash: sold: 890.105 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 18 V Rotation angle (head) 350° UN number Number of batteries included 0 Type of system case Supplied in Case Weight 1,48 kg With rotatable head Yes Shape (handle) Straight handle Battery type Li-ion Max. capacity (kN) 19 kN n: RIDGID RP 219 18V cordless press tool 19kN in case (without battery and charger) - 69068 cn: CORDLESS PRESS TOOL cn2: CORDLESS PRESS TOOL cn_clear: CORDLESSPRESSTOOL d: Product description Lightweight inline design - The RP 219's ultra-thin inline design allows you to work even in seemingly inaccessible places. Weighing less than 2 kg, the RP 219 is also the ideal tool to perform 'effortless' taxing overhead work. 350° swivel head so the user can press from almost any angle. OLED display and Bluetooth - Provides full access to important tool information such as number of press cycles, service interval, operating time, press pressure, battery status, tool warnings, etc. thanks to the integrated high-visibility OLED display and Bluetooth connection to the free RIDGID Link app. SPEED-Press! - The RP 219 offers a press speed of just 3 seconds (cycle time). So you'll have a press connection up and running in no time. Use the RP 219 with RIDGID 18 V Li-Ion batteries, with the corded power adapter (5 m cable) or with compatible 18 V batteries from the Makita LXT series. Wide range of pressing jaws - The RP 219 comes in different versions with a wide range of 19 kN pressing jaws and profiles, from the M&V profiles (maximum 35 mm) for metal connections to TH, U, G and RF (maximum 40 mm) for plastic and multilayer systems. Press-CHECK! - The RP 219 has an integrated pressure sensor, which checks the most essential aspect of your pressing task: enough pressure build-up and a press connection that is 100% reliable. With the RP 219, every press cycle is monitored and you receive an alert in case of a malfunction. Service interval of 32,000 cycles - With a service interval of 32,000 cycles and no time limit, the RP 219 offers you the lowest cost of ownership. NEW-GEN RIDGID 18V platform - The RP 219 comes with our new generation 18V advanced lithium battery and fast charger, for the highest number of press connections per charge and no downtime on site. The new RIDGID Fast Charger can also be used in the car or van to charge batteries on the way to and from the work site. ds: dsc: Scope of delivery 69063 - carrying case kts: 18V cordless press tool 19kN in case (without battery and charger) kpn: RP 219 kpn_dash: kpn_clear: RP219 bkpn: RIDGID RP 219 bkpn_clear: RIDGID RP219 c_path: Home / Tools / Powered tools / Battery tools / Pressing and crimping / Cordless press tool | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid pressing and crimping / Ridgid cordless press tool sr_no_br_cl_ns: 69068 sr_ns: RIDGID69068
r: 03378043 p: 698.37 pid: 173189 b: RIDGID q: 0 st: lt: 8 ean: 0095691780683 sr: RIDGID 78068 sr_no_br: 78068 sr_no_br_cl: 78068 sr_cl: RIDGID78068 sr_dash: sold: 698.37 p_range: none type: standard act: 1 avo: 1 av: Voltage 18 V Number of batteries included 1 Capacity (battery) 2,5 Ah Min. diameter 20 mm Max. diameter 76 mm UN number UN3481 n: RIDGID K-46 SinkSnake 18V cordless plunger with 8mm x 7.6m IC spring + T-250 tool set in carrying case (1x 2.5Ah battery + charger) - 78068 cn: CORDLESS DRAIN CLEANER cn2: CORDLESS DRAIN CLEANER cn_clear: CORDLESSDRAINCLEANER d: Product description The RIDGID® K-46 Cordless SinkSnake removes difficult blockages in 3/4" to 3" (20 - 76 mm) pipes such as sinks, baths, showers and urinals. Powered by the RIDGID 18 V advanced lithium-ion battery platform, this unblocker offers cordless freedom for professional daily use. Designed with ergonomics and versatility in mind, the K-46 features an integrated stand with multiple positions , a 360-degree rotating AUTOFEED® that pushes and retrieves the cable forward, a closed drum and is also compatible with different spring sizes and tools for unmatched ease of use. Cordless freedom - Powered by the RIDGID 18V battery platform for a duty cycle suitable for professional daily use Ergonomic - Integrated multi-position stand reduces tool weight in general work environments, such as under cramped sinks and in baths for greater comfort and support Versatility - Equipped with the 5/16" x 25' (8 mm x 7.6 mm)core spring, but also compatible with 1/4" & 3/8" (6 mm & 10 mm) springs of up to 50 ft (15.2 m) in length, as well as multiple tools such as auger threads and cutting heads. Power supply - With a brushless DC motor that removes difficult blockages in pipes from 3/4" to 3" (20 - 76 mm), such as sinks, baths, showers and urinals AUTOFEED® - Over 360-degree rotatable AUTOFEED® pushes forward and retrieves the cable for better navigation through the pipe, even in sharp bends and P-valves Design - Fully enclosed rotating drum protects plumbing and furniture from accidental damage Precision - Spring lock improves handling when manually working the blockage ds: dsc: Scope of delivery K-46 SinkSnake plunger 1x 18V 2.5Ah battery Charger T-203 spherical auger, outer diameter 7/8" (22 mm) T-205 C-shaped cutter head, 1 3/8" (35 mm) T-210 shovel-shaped cutting head 1" (25 mm) T-217 moving auger 4" (110 mm) long A-13 release pin 3/8" Carrying bag kts: 18V cordless plunger with 8mm x 7.6m IC spring + T-250 tool set in carrying case (1x 2.5Ah battery + charger) kpn: K-46 SinkSnake kpn_dash: K kpn_clear: K46SinkSnake bkpn: RIDGID K-46 SinkSnake bkpn_clear: RIDGID K46SinkSnake c_path: Home / Tools / Powered tools / Battery tools / Cleaning / Cordless drain cleaner | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid cleaning / Ridgid cordless drain cleaner sr_no_br_cl_ns: 78068 sr_ns: RIDGID78068
r: 03281929 p: 3321.345 pid: 111127 b: RIDGID q: 0 st: lt: 8 ean: 0095691720580 sr: RIDGID 72058 sr_no_br: 72058 sr_no_br_cl: 72058 sr_cl: RIDGID72058 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 60 V Number of batteries included 2 Capacity (battery) 4 Ah UN number UN3481 n: RIDGID 760 FXP 11-R 60V cordless drive machine with cutting head set in case (2x 4.0Ah battery + charger) - 72058 cn: CORDLESS THREAD CUTTING MACHINE cn2: CORDLESS THREAD CUTTING MACHINE cn_clear: CORDLESSTHREADCUTTINGMACHINE d: Product description Fast and precise wire cutting with the battery-powered RIDGID 760 FXP Drive Machine. The FXP technology platform offers mobility and the ability to draw wire up to 30 times on 2" tubes per charge*. When a kickback is detected during wire cutting, the tool automatically shuts down. The drive machine also offers industry-leading speed with additional features such as workstation lighting and LED alerts when threading is almost complete. This machine offers everything you need to get the job done. Cordless freedom - Pull up to 30 threads on 2" pipes with a single charge with the FXP battery platform* Kickback shutdown - The machine automatically shuts down if kickback is detected LEDs illuminate work area - LED near the cutting head illuminates the work area End of thread indicator - LEDs indicate when the thread is almost complete Palm block - No need to touch the cutting head directly at the start of threading due to an easily placed palm block Connected - Customise, monitor and manage your tool with the RIDGID Link app Compatibility - Compatible with existing RIDGID cutting heads and the 258 & 258XL tube cutters (12-R Machine only) ds: dsc: Scope of delivery 760 FXP electric drive (11-R) 2x 4Ah FXP batteries FXP charger 1/2-2" 11-R BSPT cutter set Support arm Case kts: 60V cordless drive machine with cutting head set in case (2x 4.0Ah battery + charger) kpn: 760 FXP 11-R kpn_dash: 760 FXP 11 kpn_clear: 760FXP11R bkpn: RIDGID 760 FXP 11-R bkpn_clear: RIDGID 760FXP11R c_path: Home / Tools / Powered tools / Battery tools / Tapping and milling / Cordless thread cutting machine | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid tapping and milling / Ridgid cordless thread cutting machine sr_no_br_cl_ns: 72058 sr_ns: RIDGID72058
r: 03281954 p: 3220.023 pid: 111132 b: RIDGID q: 0 st: lt: 8 ean: 0095691720535 sr: RIDGID 72053 sr_no_br: 72053 sr_no_br_cl: 72053 sr_cl: RIDGID72053 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 60 V Number of batteries included 2 Capacity (battery) 4 Ah UN number UN3481 n: RIDGID 760 FXP 12-R 60V cordless drive machine with cutting head set in case (2x 4.0Ah battery + charger) - 72053 cn: CORDLESS THREAD CUTTING MACHINE cn2: CORDLESS THREAD CUTTING MACHINE cn_clear: CORDLESSTHREADCUTTINGMACHINE d: Product description Fast and precise wire cutting with the battery-powered RIDGID 760 FXP Drive Machine. The FXP technology platform offers mobility and the ability to draw wire up to 30 times on 2" tubes per charge*. When a kickback is detected during wire cutting, the tool automatically shuts down. The drive machine also offers industry-leading speed with additional features such as workstation lighting and LED alerts when threading is almost complete. This machine offers everything you need to get the job done. Cordless freedom - Pull up to 30 threads on 2" pipes with a single charge with the FXP battery platform* Kickback shutdown - The machine automatically shuts down if kickback is detected LEDs illuminate work area - LED near the cutting head illuminates the work area End of thread indicator - LEDs indicate when the thread is almost complete Palm block - No need to touch the cutting head directly at the start of threading due to an easily placed palm block Connected - Customise, monitor and manage your tool with the RIDGID Link app Compatibility - Compatible with existing RIDGID cutting heads and the 258 & 258XL tube cutters (12-R Machine only) ds: dsc: Scope of delivery 760 FXP electric drive (12-R) 2x 4Ah FXP batteries FXP charger 1/2-2" 12-R BSPT cutter set Support arm Case kts: 60V cordless drive machine with cutting head set in case (2x 4.0Ah battery + charger) kpn: 760 FXP 12-R kpn_dash: 760 FXP 12 kpn_clear: 760FXP12R bkpn: RIDGID 760 FXP 12-R bkpn_clear: RIDGID 760FXP12R c_path: Home / Tools / Powered tools / Battery tools / Tapping and milling / Cordless thread cutting machine | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid tapping and milling / Ridgid cordless thread cutting machine sr_no_br_cl_ns: 72053 sr_ns: RIDGID72053
r: 03281945 p: 2420.147 pid: 108675 b: RIDGID q: 0 st: lt: 8 ean: 0095691720481 sr: RIDGID 72048 sr_no_br: 72048 sr_no_br_cl: 72048 sr_cl: RIDGID72048 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 60 V Number of batteries included 2 Capacity (battery) 4 Ah UN number UN3481 n: RIDGID 760 FXP 11-R 60V cordless drive machine in case (2x 4.0Ah battery + charger) - 72048 cn: CORDLESS THREAD CUTTING MACHINE cn2: CORDLESS THREAD CUTTING MACHINE cn_clear: CORDLESSTHREADCUTTINGMACHINE d: Product description Fast and precise wire cutting with the battery-powered RIDGID 760 FXP Drive Machine. The FXP technology platform offers mobility and the ability to draw wire up to 30 times on 2" tubes per charge*. When a kickback is detected during wire cutting, the tool automatically shuts down. The drive machine also offers industry-leading speed with additional features such as workstation lighting and LED alerts when threading is almost complete. This machine offers everything you need to get the job done. Cordless freedom - Pull up to 30 threads on 2" tubes with a single charge with the FXP battery platform* Kickback shutdown - The machine automatically shuts down if kickback is detected LEDs illuminate work area - LED near the cutting head illuminates the work area End of thread indicator - LEDs indicate when the thread is almost complete Palm block - No need to touch the cutting head directly at the start of threading due to an easily placed palm block Connected - Customise, monitor and manage your tool with the RIDGID Link app Compatibility - Compatible with existing RIDGID cutting heads and the 258 & 258XL tube cutters (12-R Machine only) ds: dsc: Scope of delivery 760 FXP electric drive (11-R) 2x 4Ah FXP batteries FXP charger Support arm Case kts: 60V cordless drive machine in case (2x 4.0Ah battery + charger) kpn: 760 FXP 11-R kpn_dash: 760 FXP 11 kpn_clear: 760FXP11R bkpn: RIDGID 760 FXP 11-R bkpn_clear: RIDGID 760FXP11R c_path: Home / Tools / Powered tools / Battery tools / Tapping and milling / Cordless thread cutting machine | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid tapping and milling / Ridgid cordless thread cutting machine sr_no_br_cl_ns: 72048 sr_ns: RIDGID72048
r: 03281957 p: 2359.196 pid: 109822 b: RIDGID q: 0 st: lt: 8 ean: 0095691720436 sr: RIDGID 72043 sr_no_br: 72043 sr_no_br_cl: 72043 sr_cl: RIDGID72043 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 60 V Number of batteries included 2 Capacity (battery) 4 Ah UN number UN3481 n: RIDGID 760 FXP 12-R 60V cordless drive machine in case (2x 4.0Ah battery + charger) - 72043 cn: CORDLESS THREAD CUTTING MACHINE cn2: CORDLESS THREAD CUTTING MACHINE cn_clear: CORDLESSTHREADCUTTINGMACHINE d: Product description Fast and precise wire cutting with the battery-powered RIDGID 760 FXP Drive Machine. The FXP technology platform offers mobility and the ability to draw wire up to 30 times on 2" tubes per charge*. When a kickback is detected during wire cutting, the tool automatically shuts down. The drive machine also offers industry-leading speed with additional features such as workstation lighting and LED alerts when threading is almost complete. This machine offers everything you need to get the job done. Cordless freedom - Pull up to 30 threads on 2" pipes with a single charge with the FXP battery platform* Kickback shutdown - The machine automatically shuts down if kickback is detected LEDs illuminate work area - LED near the cutting head illuminates the work area End of thread indicator - LEDs indicate when the thread is almost complete Palm block - No need to touch the cutting head directly at the start of threading due to an easily placed palm block Connected - Customise, monitor and manage your tool with the RIDGID Link app Compatibility - Compatible with existing RIDGID cutting heads and the 258 & 258XL tube cutters (12-R Machine only) ds: dsc: Scope of delivery 760 FXP electric drive (12-R) 2x 4Ah FXP batteries FXP charger Support arm Case kts: 60V cordless drive machine in case (2x 4.0Ah battery + charger) kpn: 760 FXP 12-R kpn_dash: 760 FXP 12 kpn_clear: 760FXP12R bkpn: RIDGID 760 FXP 12-R bkpn_clear: RIDGID 760FXP12R c_path: Home / Tools / Powered tools / Battery tools / Tapping and milling / Cordless thread cutting machine | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid tapping and milling / Ridgid cordless thread cutting machine sr_no_br_cl_ns: 72043 sr_ns: RIDGID72043
r: 03281949 p: 2225.89 pid: 109816 b: RIDGID q: 0 st: lt: 8 ean: 0095691720382 sr: RIDGID 72038 sr_no_br: 72038 sr_no_br_cl: 72038 sr_cl: RIDGID72038 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Battery voltage 60 V Number of batteries included 1 Capacity (battery) 4 Ah UN number UN3481 n: RIDGID 760 FXP 11-R 60V cordless drive machine in case (1x 4.0Ah battery + charger) - 72038 cn: CORDLESS THREAD CUTTING MACHINE cn2: CORDLESS THREAD CUTTING MACHINE cn_clear: CORDLESSTHREADCUTTINGMACHINE d: Product description Cordless freedom - Pull up to 30 threads on 2" tubes with a single charge with the FXP battery platform Kickback shutdown - The machine automatically shuts down if kickback is detected LEDs illuminate work area - LED near the cutting head illuminates the work area End of thread indicator - LEDs indicate when the thread is almost complete Palm block - No need to touch the cutting head directly at the start of threading due to an easily placed palm block Connected - Customise, monitor and manage your tool with the RIDGID Link app Compatibility - Compatible with existing RIDGID cutting heads but NOT with 258 & 258XL tube cutters (use the 12-R machine for this) ds: dsc: Scope of delivery 760 FXP electric drive (11-R) 2x 4Ah FXP batteries FXP charger Support arm Case kts: 60V cordless drive machine in case (1x 4.0Ah battery + charger) kpn: 760 FXP 11-R kpn_dash: 760 FXP 11 kpn_clear: 760FXP11R bkpn: RIDGID 760 FXP 11-R bkpn_clear: RIDGID 760FXP11R c_path: Home / Tools / Powered tools / Battery tools / Tapping and milling / Cordless thread cutting machine | Home / Our brands / Ridgid / Ridgid tools / Ridgid powered tools / Ridgid battery tools / Ridgid tapping and milling / Ridgid cordless thread cutting machine sr_no_br_cl_ns: 72038 sr_ns: RIDGID72038
