r: 03030425 p: 14.141 pid: 88556 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B1SSS107I sr_no_br: 12B1SSS107I sr_no_br_cl: 12B1SSS107I sr_cl: RENOLD12B1SSS107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 1,22 kg/m Height 2,6 Breaking strength 18640 N Length (pin) 21,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Stainless Steel Type (ISO/ANSI) 12B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 12b-1 latch link simplex 3/4 inch - 12B1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: latch link simplex 3/4 inch kpn: Stainless Steel 12b-1 kpn_dash: Stainless Steel 12b kpn_clear: StainlessSteel12b1 bkpn: RENOLD Stainless Steel 12b-1 bkpn_clear: RENOLD StainlessSteel12b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 12B1SSS107I sr_ns: RENOLD12B1SSS107I
r: 02096791 p: 14.012 pid: 87595 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B2S107I sr_no_br: 12B2S107I sr_no_br_cl: 12B2S107I sr_cl: RENOLD12B2S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 2,42 kg/m Height 2,6 Breaking strength 57800 N Transverse pitch 19,46 mm Length (pin) 41,4 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Blue Type (ISO/ANSI) 12B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 12b-2 rivet link duplex 3/4 inch - 12B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 3/4 inch kpn: Blue 12b-2 kpn_dash: Blue 12b kpn_clear: Blue12b2 bkpn: RENOLD Blue 12b-2 bkpn_clear: RENOLD Blue12b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 12B2S107I sr_ns: RENOLD12B2S107I
r: 02097158 p: 13.897 pid: 88337 b: RENOLD q: 0 st: lt: 15 ean: 6623900987185 sr: RENOLD 40A2S107I sr_no_br: 40A2S107I sr_no_br_cl: 40A2S107I sr_cl: RENOLD40A2S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 1,2 kg/m Height 2,1 Breaking strength 27800 N Transverse pitch 14,38 mm Length (pin) 30,8 mm Inside width 7,85 mm Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Product line Renold Blue Type (ISO/ANSI) 40-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 40-2 rivet link duplex 1/2 inch - 40A2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 1/2 inch kpn: Blue 40-2 kpn_dash: Blue 40 kpn_clear: Blue402 bkpn: RENOLD Blue 40-2 bkpn_clear: RENOLD Blue402 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 40A2S107I sr_ns: RENOLD40A2S107I
r: 03030230 p: 13.336 pid: 89661 b: RENOLD q: 0 st: lt: 15 ean: 0673766002658 sr: RENOLD GY12B1S107I sr_no_br: GY12B1S107I sr_no_br_cl: GY12B1S107I sr_cl: RENOLDGY12B1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 1,22 kg/m Height 2,6 Breaking strength 28900 N Length (pin) 21,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Synergy Type (ISO/ANSI) 12B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 12b-1 latch link simplex 3/4 inch - GY12B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: latch link simplex 3/4 inch kpn: Synergy 12b-1 kpn_dash: Synergy 12b kpn_clear: Synergy12b1 bkpn: RENOLD Synergy 12b-1 bkpn_clear: RENOLD Synergy12b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY12B1S107I sr_ns: RENOLDGY12B1S107I
r: 03030258 p: 13.235 pid: 87730 b: RENOLD q: 0 st: lt: 15 ean: 6623900897569 sr: RENOLD GY40A1S107I sr_no_br: GY40A1S107I sr_no_br_cl: GY40A1S107I sr_cl: RENOLDGY40A1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,6 kg/m Height 2,1 Breaking strength 13900 N Length (pin) 16,4 mm Inside width 7,85 mm Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Product line Renold Synergy Type (ISO/ANSI) 40-1 Number of the connecting link 107 Version (link) Triplex n: RENOLD Synergy 40-1 rivet plywood 1/2 inch - GY40A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet plywood 1/2 inch kpn: Synergy 40-1 kpn_dash: Synergy 40 kpn_clear: Synergy401 bkpn: RENOLD Synergy 40-1 bkpn_clear: RENOLD Synergy401 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY40A1S107I sr_ns: RENOLDGY40A1S107I
r: 02096783 p: 12.156 pid: 89522 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 10B2S107I sr_no_br: 10B2S107I sr_no_br_cl: 10B2S107I sr_cl: RENOLD10B2S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 1,69 kg/m Height 2,5 Breaking strength 44500 N Transverse pitch 16,59 mm Length (pin) 35,4 mm Inside width 9,65 mm Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Product line Renold Blue Type (ISO/ANSI) 10B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 10b-2 rivet link duplex 5/8 inch - 10B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 5/8 inch kpn: Blue 10b-2 kpn_dash: Blue 10b kpn_clear: Blue10b2 bkpn: RENOLD Blue 10b-2 bkpn_clear: RENOLD Blue10b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 10B2S107I sr_ns: RENOLD10B2S107I
r: 03030428 p: 11.753 pid: 89677 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 08B2SSS107I sr_no_br: 08B2SSS107I sr_no_br_cl: 08B2SSS107I sr_cl: RENOLD08B2SSS107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 1,38 kg/m Height 2 Breaking strength 23540 N Transverse pitch 13,92 mm Length (pin) 30,4 mm Inside width 7,75 mm Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Product line Renold Stainless Steel Type (ISO/ANSI) 08B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Stainless Steel 08b-2 rivet link duplex 1/2 inch - 08B2SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: rivet link duplex 1/2 inch kpn: Stainless Steel 08b-2 kpn_dash: Stainless Steel 08b kpn_clear: StainlessSteel08b2 bkpn: RENOLD Stainless Steel 08b-2 bkpn_clear: RENOLD StainlessSteel08b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 08B2SSS107I sr_ns: RENOLD08B2SSS107I
r: 03030229 p: 11.581 pid: 89656 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY10B1S107I sr_no_br: GY10B1S107I sr_no_br_cl: GY10B1S107I sr_cl: RENOLDGY10B1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,81 kg/m Height 2,5 Breaking strength 22200 N Length (pin) 16 mm Inside width 6,48 mm Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Product line Renold Synergy Type (ISO/ANSI) 10B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 10b-1 rivet link simplex 5/8 inch - GY10B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet link simplex 5/8 inch kpn: Synergy 10b-1 kpn_dash: Synergy 10b kpn_clear: Synergy10b1 bkpn: RENOLD Synergy 10b-1 bkpn_clear: RENOLD Synergy10b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY10B1S107I sr_ns: RENOLDGY10B1S107I
r: 02096766 p: 11.537 pid: 89547 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 06B2S107I sr_no_br: 06B2S107I sr_no_br_cl: 06B2S107I sr_cl: RENOLD06B2S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,04 mm Weight (kg/m) 0,78 kg/m Height 1,3 Breaking strength 16900 N Transverse pitch 10,24 mm Length (pin) 23 mm Inside width 5,72 mm Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Product line Renold Blue Type (ISO/ANSI) 06B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 06b-2 rivet link duplex 3/8 inch - 06B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 3/8 inch kpn: Blue 06b-2 kpn_dash: Blue 06b kpn_clear: Blue06b2 bkpn: RENOLD Blue 06b-2 bkpn_clear: RENOLD Blue06b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 06B2S107I sr_ns: RENOLD06B2S107I
r: 02096834 p: 11.48 pid: 71639 b: RENOLD q: 0 st: lt: 15 ean: 6623901224029 sr: RENOLD 40A1S107I sr_no_br: 40A1S107I sr_no_br_cl: 40A1S107I sr_cl: RENOLD40A1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,6 kg/m Height 2,1 Breaking strength 13900 N Length (pin) 16,4 mm Inside width 7,85 mm Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Product line Renold Blue Type (ISO/ANSI) 40-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 40-1 latch link simplex 1/2 inch - 40A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 1/2 inch kpn: Blue 40-1 kpn_dash: Blue 40 kpn_clear: Blue401 bkpn: RENOLD Blue 40-1 bkpn_clear: RENOLD Blue401 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 40A1S107I sr_ns: RENOLD40A1S107I
r: 03030221 p: 10.991 pid: 89616 b: RENOLD q: 0 st: lt: 15 ean: 0673766000920 sr: RENOLD GY06B1S107I sr_no_br: GY06B1S107I sr_no_br_cl: GY06B1S107I sr_cl: RENOLDGY06B1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,04 mm Weight (kg/m) 0,39 kg/m Height 1,3 Breaking strength 8900 N Length (pin) 12,5 mm Inside width 5,72 mm Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Product line Renold Synergy Type (ISO/ANSI) 06B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 06b-1 rivet link simplex 3/8 inch - GY06B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet link simplex 3/8 inch kpn: Synergy 06b-1 kpn_dash: Synergy 06b kpn_clear: Synergy06b1 bkpn: RENOLD Synergy 06b-1 bkpn_clear: RENOLD Synergy06b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY06B1S107I sr_ns: RENOLDGY06B1S107I
r: 02096778 p: 10.674 pid: 87590 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 08B2S107I sr_no_br: 08B2S107I sr_no_br_cl: 08B2S107I sr_cl: RENOLD08B2S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 1,38 kg/m Height 2 Breaking strength 31100 N Transverse pitch 13,92 mm Length (pin) 30,4 mm Inside width 7,75 mm Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Product line Renold Blue Type (ISO/ANSI) 08B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 08b-2 rivet link duplex 1/2 inch - 08B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 1/2 inch kpn: Blue 08b-2 kpn_dash: Blue 08b kpn_clear: Blue08b2 bkpn: RENOLD Blue 08b-2 bkpn_clear: RENOLD Blue08b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 08B2S107I sr_ns: RENOLD08B2S107I
r: 03030227 p: 10.199 pid: 88079 b: RENOLD q: 0 st: lt: 15 ean: 0673766001378 sr: RENOLD GY08B1S107I sr_no_br: GY08B1S107I sr_no_br_cl: GY08B1S107I sr_cl: RENOLDGY08B1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,7 kg/m Height 2 Breaking strength 17800 N Length (pin) 16,5 mm Inside width 7,75 mm Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Product line Renold Synergy Type (ISO/ANSI) 08B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 08b-1 latch link simplex 1/2 inch - GY08B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: latch link simplex 1/2 inch kpn: Synergy 08b-1 kpn_dash: Synergy 08b kpn_clear: Synergy08b1 bkpn: RENOLD Synergy 08b-1 bkpn_clear: RENOLD Synergy08b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY08B1S107I sr_ns: RENOLDGY08B1S107I
r: 03030422 p: 9.883 pid: 88554 b: RENOLD q: 0 st: lt: 15 ean: 6623901294916 sr: RENOLD 06B1SSS107I sr_no_br: 06B1SSS107I sr_no_br_cl: 06B1SSS107I sr_cl: RENOLD06B1SSS107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,04 mm Weight (kg/m) 0,39 kg/m Height 1,3 Breaking strength 6850 N Length (pin) 12,5 mm Inside width 5,72 mm Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Product line Renold Stainless Steel Type (ISO/ANSI) 06B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 06b-1 rivet link simplex 3/8 inch - 06B1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: rivet link simplex 3/8 inch kpn: Stainless Steel 06b-1 kpn_dash: Stainless Steel 06b kpn_clear: StainlessSteel06b1 bkpn: RENOLD Stainless Steel 06b-1 bkpn_clear: RENOLD StainlessSteel06b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 06B1SSS107I sr_ns: RENOLD06B1SSS107I
r: 02096854 p: 8.675 pid: 87599 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A1S107I sr_no_br: 60A1S107I sr_no_br_cl: 60A1S107I sr_cl: RENOLD60A1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 2,45 mm Weight (kg/m) 1,47 kg/m Height 2,6 Breaking strength 31300 N Length (pin) 25,3 mm Inside width 12,57 mm Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Product line Renold Blue Type (ISO/ANSI) 60-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 60-1 latch link simplex 3/4 inch - 60A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 3/4 inch kpn: Blue 60-1 kpn_dash: Blue 60 kpn_clear: Blue601 bkpn: RENOLD Blue 60-1 bkpn_clear: RENOLD Blue601 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 60A1S107I sr_ns: RENOLD60A1S107I
r: 03030424 p: 8.142 pid: 87761 b: RENOLD q: 0 st: lt: 15 ean: 0673766020034 sr: RENOLD 10B1SSS107I sr_no_br: 10B1SSS107I sr_no_br_cl: 10B1SSS107I sr_cl: RENOLD10B1SSS107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,96 kg/m Height 2,5 Breaking strength 14700 N Length (pin) 18,8 mm Inside width 9,65 mm Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Product line Renold Stainless Steel Type (ISO/ANSI) 10B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 10b-1 rivet link simplex 5/8 inch - 10B1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: rivet link simplex 5/8 inch kpn: Stainless Steel 10b-1 kpn_dash: Stainless Steel 10b kpn_clear: StainlessSteel10b1 bkpn: RENOLD Stainless Steel 10b-1 bkpn_clear: RENOLD StainlessSteel10b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 10B1SSS107I sr_ns: RENOLD10B1SSS107I
r: 03030423 p: 7.749 pid: 89732 b: RENOLD q: 0 st: lt: 15 ean: 0673766020287 sr: RENOLD 08B1SSS107I sr_no_br: 08B1SSS107I sr_no_br_cl: 08B1SSS107I sr_cl: RENOLD08B1SSS107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,7 kg/m Height 2 Breaking strength 12000 N Length (pin) 16,5 mm Inside width 7,75 mm Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Product line Renold Stainless Steel Type (ISO/ANSI) 08B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 08b-1 latch link simplex 1/2 inch - 08B1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: latch link simplex 1/2 inch kpn: Stainless Steel 08b-1 kpn_dash: Stainless Steel 08b kpn_clear: StainlessSteel08b1 bkpn: RENOLD Stainless Steel 08b-1 bkpn_clear: RENOLD StainlessSteel08b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 08B1SSS107I sr_ns: RENOLD08B1SSS107I
r: 02096845 p: 7.538 pid: 89552 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A1S107I sr_no_br: 50A1S107I sr_no_br_cl: 50A1S107I sr_cl: RENOLD50A1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 2,04 mm Weight (kg/m) 1 kg/m Height 2,7 Breaking strength 21800 N Length (pin) 20,4 mm Inside width 9,4 mm Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Product line Renold Blue Type (ISO/ANSI) 50-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 50-1 rivet link simplex 5/8 inch - 50A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 5/8 inch kpn: Blue 50-1 kpn_dash: Blue 50 kpn_clear: Blue501 bkpn: RENOLD Blue 50-1 bkpn_clear: RENOLD Blue501 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 50A1S107I sr_ns: RENOLD50A1S107I
r: 02096821 p: 6.925 pid: 88310 b: RENOLD q: 0 st: lt: 15 ean: 6623901333400 sr: RENOLD 35A1S107I sr_no_br: 35A1S107I sr_no_br_cl: 35A1S107I sr_cl: RENOLD35A1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,29 mm Weight (kg/m) 0,35 kg/m Height 1,7 Breaking strength 7900 N Length (pin) 12 mm Inside width 4,68 mm Diameter (pin) 3,59 mm Thickness (inner plate) 1,29 mm Plate height 8,6 mm Product line Renold Blue Type (ISO/ANSI) 35-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 35-1 rivet link simplex 3/8 inch - 35A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 3/8 inch kpn: Blue 35-1 kpn_dash: Blue 35 kpn_clear: Blue351 bkpn: RENOLD Blue 35-1 bkpn_clear: RENOLD Blue351 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 35A1S107I sr_ns: RENOLD35A1S107I
r: 02096748 p: 6.675 pid: 87994 b: RENOLD q: 0 st: lt: 15 ean: 0673766002641 sr: RENOLD 12B1S107I sr_no_br: 12B1S107I sr_no_br_cl: 12B1S107I sr_cl: RENOLD12B1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 1,22 kg/m Height 2,6 Breaking strength 28900 N Length (pin) 21,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Blue Type (ISO/ANSI) 12B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 12b-1 latch link simplex 3/4 inch - 12B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 3/4 inch kpn: Blue 12b-1 kpn_dash: Blue 12b kpn_clear: Blue12b1 bkpn: RENOLD Blue 12b-1 bkpn_clear: RENOLD Blue12b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 12B1S107I sr_ns: RENOLD12B1S107I
