r: 03050199 p: 330.537 pid: 88651 b: RENOLD q: 0 st: lt: 15 ean: 0673766007660 sr: RENOLD 28B2S12I sr_no_br: 28B2S12I sr_no_br_cl: 28B2S12I sr_cl: RENOLD28B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 7,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 18,6 kg/m Length (pin) 123,7 mm Height 6,8 Thickness (outer plate) 6,35 mm Plate height 37,08 mm Type (ISO/ANSI) 28B-2 Version (link) Duplex Diameter (pin) 15,9 mm Diameter (roller) 27,94 mm Breaking strength 360000 N Inside width 27,94 mm n: RENOLD 28B2S12I reducing link BLUE 28b-2 - duplex 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 28b-2 - duplex 1 3/4 inch kpn: 28B2S12I kpn_dash: kpn_clear: 28B2S12I bkpn: RENOLD 28B2S12I bkpn_clear: RENOLD 28B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 28B2S12I sr_ns: RENOLD28B2S12I
r: 03050204 p: 305.619 pid: 87848 b: RENOLD q: 0 st: lt: 15 ean: 6623901336609 sr: RENOLD GY20B3S12I sr_no_br: GY20B3S12I sr_no_br_cl: GY20B3S12I sr_cl: RENOLDGY20B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,62 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 11,65 kg/m Length (pin) 113,2 mm Height 2,7 Thickness (outer plate) 3,61 mm Plate height 26,42 mm Type (ISO/ANSI) 20B-3 Version (link) Triplex Diameter (pin) 10,19 mm Diameter (roller) 19,05 mm Breaking strength 250000 N Inside width 19,56 mm n: RENOLD GY20B3S12I reducer SYNERGY 20b-3 - plywood 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 20b-3 - plywood 1 1/4 inch kpn: GY20B3S12I kpn_dash: kpn_clear: GY20B3S12I bkpn: RENOLD GY20B3S12I bkpn_clear: RENOLD GY20B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY20B3S12I sr_ns: RENOLDGY20B3S12I
r: 02097214 p: 293.553 pid: 89771 b: RENOLD q: 0 st: lt: 15 ean: 6623900525929 sr: RENOLD 120A2S12I sr_no_br: 120A2S12I sr_no_br_cl: 120A2S12I sr_cl: RENOLD120A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 11 kg/m Length (pin) 94,7 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-2 Version (link) Duplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 250000 N Inside width 25,23 mm n: RENOLD 120A2S12I reducing link BLUE 120-2 - duplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 120-2 - duplex 1 1/2 inch kpn: 120A2S12I kpn_dash: kpn_clear: 120A2S12I bkpn: RENOLD 120A2S12I bkpn_clear: RENOLD 120A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 120A2S12I sr_ns: RENOLD120A2S12I
r: 03050211 p: 279.504 pid: 88245 b: RENOLD q: 0 st: lt: 15 ean: 0673766042944 sr: RENOLD GY120A1S12I sr_no_br: GY120A1S12I sr_no_br_cl: GY120A1S12I sr_cl: RENOLDGY120A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 5,7 kg/m Length (pin) 49,3 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-1 Version (link) Simplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 125000 N Inside width 25,23 mm n: RENOLD GY120A1S12I reduction gear unit SYNERGY 120-1 - simplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reduction gear unit SYNERGY 120-1 - simplex 1 1/2 inch kpn: GY120A1S12I kpn_dash: kpn_clear: GY120A1S12I bkpn: RENOLD GY120A1S12I bkpn_clear: RENOLD GY120A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY120A1S12I sr_ns: RENOLDGY120A1S12I
r: 03050218 p: 252.851 pid: 88654 b: RENOLD q: 0 st: lt: 15 ean: 0673766042913 sr: RENOLD GY100A2S12I sr_no_br: GY100A2S12I sr_no_br_cl: GY100A2S12I sr_cl: RENOLDGY100A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,06 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 4,2 kg/m Length (pin) 75,4 mm Height 4,2 Thickness (outer plate) 4,06 mm Plate height 30,17 mm Type (ISO/ANSI) 100-2 Version (link) Duplex Diameter (pin) 9,54 mm Diameter (roller) 19,05 mm Breaking strength 87000 N Inside width 18,9 mm n: RENOLD GY100A2S12I reducer SYNERGY 100-2 - duplex 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 100-2 - duplex 1 1/4 inch kpn: GY100A2S12I kpn_dash: kpn_clear: GY100A2S12I bkpn: RENOLD GY100A2S12I bkpn_clear: RENOLD GY100A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY100A2S12I sr_ns: RENOLDGY100A2S12I
r: 03050226 p: 249.752 pid: 87870 b: RENOLD q: 0 st: lt: 15 ean: 0673766042777 sr: RENOLD GY80A3S12I sr_no_br: GY80A3S12I sr_no_br_cl: GY80A3S12I sr_cl: RENOLDGY80A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,25 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 8,3 kg/m Length (pin) 91,2 mm Height 3 Thickness (outer plate) 3,25 mm Plate height 24,13 mm Type (ISO/ANSI) 80A-3 Version (link) Triplex Diameter (pin) 7,94 mm Diameter (roller) 15,88 mm Breaking strength 166800 N Inside width 15,75 mm n: RENOLD GY80A3S12I reducer SYNERGY 80a-3 - plywood 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 80a-3 - plywood 1 inch kpn: GY80A3S12I kpn_dash: kpn_clear: GY80A3S12I bkpn: RENOLD GY80A3S12I bkpn_clear: RENOLD GY80A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY80A3S12I sr_ns: RENOLDGY80A3S12I
r: 03050018 p: 225.785 pid: 89805 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766007608 sr: RENOLD 24B2S12I sr_no_br: 24B2S12I sr_no_br_cl: 24B2S12I sr_cl: RENOLD24B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 6,1 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 14,8 kg/m Length (pin) 101,3 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-2 Version (link) Duplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 280000 N Inside width 25,4 mm n: RENOLD 24B2S12I reducing link BLUE 24b-2 - duplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 24b-2 - duplex 1 1/2 inch kpn: 24B2S12I kpn_dash: kpn_clear: 24B2S12I bkpn: RENOLD 24B2S12I bkpn_clear: RENOLD 24B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 24B2S12I sr_ns: RENOLD24B2S12I
r: 02274324 p: 215.041 pid: 73641 b: RENOLD q: 0 st: lt: 15 ean: 6623900917144 sr: RENOLD GY24B1S12I sr_no_br: GY24B1S12I sr_no_br_cl: GY24B1S12I sr_cl: RENOLDGY24B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 5,08 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 7,45 kg/m Length (pin) 52,6 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-1 Version (link) Simplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 160000 N Inside width 25,4 mm n: RENOLD GY24B1S12I reducer SYNERGY 24b-1 - simplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 24b-1 - simplex 1 1/2 inch kpn: GY24B1S12I kpn_dash: kpn_clear: GY24B1S12I bkpn: RENOLD GY24B1S12I bkpn_clear: RENOLD GY24B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY24B1S12I sr_ns: RENOLDGY24B1S12I
r: 02096891 p: 204.628 pid: 88164 b: RENOLD q: 0 st: lt: 15 ean: 6623900527800 sr: RENOLD 140A1S12I sr_no_br: 140A1S12I sr_no_br_cl: 140A1S12I sr_cl: RENOLD140A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 5,61 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 7,8 kg/m Length (pin) 52,9 mm Height 5,2 Thickness (outer plate) 5,61 mm Plate height 42,23 mm Type (ISO/ANSI) 140-1 Version (link) Simplex Diameter (pin) 12,71 mm Diameter (roller) 25,4 mm Breaking strength 170000 N Inside width 25,23 mm n: RENOLD 140A1S12I reducing link BLUE 140-1 - simplex 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 140-1 - simplex 1 3/4 inch kpn: 140A1S12I kpn_dash: kpn_clear: 140A1S12I bkpn: RENOLD 140A1S12I bkpn_clear: RENOLD 140A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 140A1S12I sr_ns: RENOLD140A1S12I
r: 02097265 p: 204.078 pid: 89773 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A3S12I sr_no_br: 80A3S12I sr_no_br_cl: 80A3S12I sr_cl: RENOLD80A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,25 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 8,3 kg/m Length (pin) 91,2 mm Height 3 Thickness (outer plate) 3,25 mm Plate height 24,13 mm Type (ISO/ANSI) 80-3 Version (link) Triplex Diameter (pin) 7,94 mm Diameter (roller) 15,88 mm Breaking strength 166800 N Inside width 15,75 mm n: RENOLD 80A3S12I reducer BLUE 80-3 - plywood 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 80-3 - plywood 1 inch kpn: 80A3S12I kpn_dash: kpn_clear: 80A3S12I bkpn: RENOLD 80A3S12I bkpn_clear: RENOLD 80A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 80A3S12I sr_ns: RENOLD80A3S12I
r: 03050036 p: 202.809 pid: 27880 b: RENOLD q: 0 st: lt: 15 ean: 6623900528708 sr: RENOLD 160A1S12I sr_no_br: 160A1S12I sr_no_br_cl: 160A1S12I sr_cl: RENOLD160A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 6,35 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 10,4 kg/m Length (pin) 63,1 mm Height 6,5 Thickness (outer plate) 6,35 mm Plate height 48,26 mm Type (ISO/ANSI) 160-1 Version (link) Simplex Diameter (pin) 14,29 mm Diameter (roller) 28,58 mm Breaking strength 223000 N Inside width 31,55 mm n: RENOLD 160A1S12I reducing link BLUE 160-1 - simplex 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 160-1 - simplex 2 inch kpn: 160A1S12I kpn_dash: kpn_clear: 160A1S12I bkpn: RENOLD 160A1S12I bkpn_clear: RENOLD 160A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 160A1S12I sr_ns: RENOLD160A1S12I
r: 02097268 p: 198.677 pid: 88170 b: RENOLD q: 0 st: lt: 15 ean: 6623900524632 sr: RENOLD 100A3S12I sr_no_br: 100A3S12I sr_no_br_cl: 100A3S12I sr_cl: RENOLD100A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,06 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 12,6 kg/m Length (pin) 111,2 mm Height 4,2 Thickness (outer plate) 4,06 mm Plate height 30,17 mm Type (ISO/ANSI) 100-3 Version (link) Triplex Diameter (pin) 9,54 mm Diameter (roller) 19,05 mm Breaking strength 261000 N Inside width 18,9 mm n: RENOLD 100A3S12I reducer BLUE 100-3 - plywood 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 100-3 - plywood 1 1/4 inch kpn: 100A3S12I kpn_dash: kpn_clear: 100A3S12I bkpn: RENOLD 100A3S12I bkpn_clear: RENOLD 100A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 100A3S12I sr_ns: RENOLD100A3S12I
r: 03050010 p: 194.38 pid: 87797 b: RENOLD q: 0 st: lt: 17 ean: 0673766004379 sr: RENOLD 32B1S12I sr_no_br: 32B1S12I sr_no_br_cl: 32B1S12I sr_cl: RENOLD32B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 7,11 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 10,1 kg/m Length (pin) 63,4 mm Height 8 Thickness (outer plate) 6,35 mm Plate height 42,29 mm Type (ISO/ANSI) 32B-1 Version (link) Simplex Diameter (pin) 17,81 mm Diameter (roller) 29,21 mm Breaking strength 250000 N Inside width 30,99 mm n: RENOLD 32B1S12I reducer BLUE 32b-1 - simplex 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 32b-1 - simplex 2 inch kpn: 32B1S12I kpn_dash: kpn_clear: 32B1S12I bkpn: RENOLD 32B1S12I bkpn_clear: RENOLD 32B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 32B1S12I sr_ns: RENOLD32B1S12I
r: 03050197 p: 194.38 pid: 89835 b: RENOLD q: 0 st: lt: 15 ean: 6623901323982 sr: RENOLD GY20B2S12I sr_no_br: GY20B2S12I sr_no_br_cl: GY20B2S12I sr_cl: RENOLDGY20B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,62 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 7,8 kg/m Length (pin) 76,7 mm Height 2,7 Thickness (outer plate) 3,61 mm Plate height 26,42 mm Type (ISO/ANSI) 20B-2 Version (link) Duplex Diameter (pin) 10,19 mm Diameter (roller) 19,05 mm Breaking strength 170000 N Inside width 19,56 mm n: RENOLD GY20B2S12I reducer SYNERGY 20b-2 - duplex 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 20b-2 - duplex 1 1/4 inch kpn: GY20B2S12I kpn_dash: kpn_clear: GY20B2S12I bkpn: RENOLD GY20B2S12I bkpn_clear: RENOLD GY20B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY20B2S12I sr_ns: RENOLDGY20B2S12I
r: 03050170 p: 192.066 pid: 29095 b: RENOLD q: 0 st: lt: 15 ean: 6623901336593 sr: RENOLD GY16B3S12I sr_no_br: GY16B3S12I sr_no_br_cl: GY16B3S12I sr_cl: RENOLDGY16B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 4,12 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 8,15 kg/m Length (pin) 98,6 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-3 Version (link) Triplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 160000 N Inside width 17,02 mm n: RENOLD GY16B3S12I reducer SYNERGY 16b-3 - plywood 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 16b-3 - plywood 1 inch kpn: GY16B3S12I kpn_dash: kpn_clear: GY16B3S12I bkpn: RENOLD GY16B3S12I bkpn_clear: RENOLD GY16B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY16B3S12I sr_ns: RENOLDGY16B3S12I
r: 03050191 p: 157.355 pid: 88648 b: RENOLD q: 0 st: lt: 15 ean: 0673766004287 sr: RENOLD 28B1S12I sr_no_br: 28B1S12I sr_no_br_cl: 28B1S12I sr_cl: RENOLD28B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 7,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 9,35 kg/m Length (pin) 64,2 mm Height 6,8 Thickness (outer plate) 6,35 mm Plate height 37,08 mm Type (ISO/ANSI) 28B-1 Version (link) Simplex Diameter (pin) 15,9 mm Diameter (roller) 27,94 mm Breaking strength 200000 N Inside width 30,99 mm n: RENOLD 28B1S12I reducing link BLUE 28b-1 - simplex 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 28b-1 - simplex 1 3/4 inch kpn: 28B1S12I kpn_dash: kpn_clear: 28B1S12I bkpn: RENOLD 28B1S12I bkpn_clear: RENOLD 28B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 28B1S12I sr_ns: RENOLD28B1S12I
r: 03050026 p: 152.727 pid: 88196 b: RENOLD q: 0 st: lt: 15 ean: 0673766009527 sr: RENOLD 20B3S12I sr_no_br: 20B3S12I sr_no_br_cl: 20B3S12I sr_cl: RENOLD20B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 11,65 kg/m Length (pin) 113,2 mm Height 2,7 Thickness (outer plate) 3,61 mm Plate height 26,42 mm Type (ISO/ANSI) 20B-3 Version (link) Triplex Diameter (pin) 10,19 mm Diameter (roller) 19,05 mm Breaking strength 250000 N Inside width 19,56 mm n: RENOLD 20B3S12I reducer BLUE 20b-3 - plywood 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 20b-3 - plywood 1 1/4 inch kpn: 20B3S12I kpn_dash: kpn_clear: 20B3S12I bkpn: RENOLD 20B3S12I bkpn_clear: RENOLD 20B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 20B3S12I sr_ns: RENOLD20B3S12I
r: 02096880 p: 139.628 pid: 88161 b: RENOLD q: 0 st: lt: 15 ean: 6623900526810 sr: RENOLD 120A1S12I sr_no_br: 120A1S12I sr_no_br_cl: 120A1S12I sr_cl: RENOLD120A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 5,7 kg/m Length (pin) 49,3 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-1 Version (link) Simplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 125000 N Inside width 25,23 mm n: RENOLD 120A1S12I reducing link BLUE 120-1 - simplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 120-1 - simplex 1 1/2 inch kpn: 120A1S12I kpn_dash: kpn_clear: 120A1S12I bkpn: RENOLD 120A1S12I bkpn_clear: RENOLD 120A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 120A1S12I sr_ns: RENOLD120A1S12I
r: 03050040 p: 129.874 pid: 27480 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S12I sr_no_br: 80A2S12I sr_no_br_cl: 80A2S12I sr_cl: RENOLD80A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,25 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 5,5 kg/m Length (pin) 61,9 mm Height 3 Thickness (outer plate) 3,25 mm Plate height 24,13 mm Type (ISO/ANSI) 80-2 Version (link) Duplex Diameter (pin) 7,94 mm Diameter (roller) 15,88 mm Breaking strength 111200 N Inside width 15,75 mm n: RENOLD 80A2S12I reducing link BLUE 80-2 - duplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 80-2 - duplex 1 inch kpn: 80A2S12I kpn_dash: kpn_clear: 80A2S12I bkpn: RENOLD 80A2S12I bkpn_clear: RENOLD 80A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 80A2S12I sr_ns: RENOLD80A2S12I
r: 03050041 p: 126.404 pid: 87806 b: RENOLD q: 0 st: lt: 15 ean: 6623900524496 sr: RENOLD 100A2S12I sr_no_br: 100A2S12I sr_no_br_cl: 100A2S12I sr_cl: RENOLD100A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,06 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 8,4 kg/m Length (pin) 75,4 mm Height 4,2 Thickness (outer plate) 4,06 mm Plate height 30,17 mm Type (ISO/ANSI) 100-2 Version (link) Duplex Diameter (pin) 9,54 mm Diameter (roller) 19,05 mm Breaking strength 174000 N Inside width 18,9 mm n: RENOLD 100A2S12I reducing link BLUE 100-2 - duplex 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 100-2 - duplex 1 1/4 inch kpn: 100A2S12I kpn_dash: kpn_clear: 100A2S12I bkpn: RENOLD 100A2S12I bkpn_clear: RENOLD 100A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 100A2S12I sr_ns: RENOLD100A2S12I
