r: 03030145 p: 25.779 pid: 89603 b: RENOLD q: 0 st: lt: 15 ean: 0673766015108 sr: RENOLD 08B2SSS26I sr_no_br: 08B2SSS26I sr_no_br_cl: 08B2SSS26I sr_cl: RENOLD08B2SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,4 mm Product line Renold Stainless Steel Weight (kg/m) 1,38 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-2 Height 2 Inside width 7,75 mm Breaking strength 23540 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 08B-2 No. 26 connecting link duplex 1/2" - 08B2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 1/2" kpn: stainless steel 08B-2 No. 26 kpn_dash: stainless steel 08B kpn_clear: stainlesssteel08B2No26 bkpn: RENOLD stainless steel 08B-2 No. 26 bkpn_clear: RENOLD stainlesssteel08B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B2SSS26I sr_ns: RENOLD08B2SSS26I
r: 03050135 p: 25.729 pid: 88229 b: RENOLD q: 0 st: lt: 15 ean: 0673766015443 sr: RENOLD 12B1SSS12I sr_no_br: 12B1SSS12I sr_no_br_cl: 12B1SSS12I sr_cl: RENOLD12B1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-1 Version (link) Simplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 18640 N Inside width 11,68 mm n: RENOLD 12B1SSS12I reduction link stainless steel 12b-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 12b-1 - simplex 3/4 inch kpn: 12B1SSS12I kpn_dash: kpn_clear: 12B1SSS12I bkpn: RENOLD 12B1SSS12I bkpn_clear: RENOLD 12B1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B1SSS12I sr_ns: RENOLD12B1SSS12I
r: 03030449 p: 25.089 pid: 87767 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A1SSS26I sr_no_br: 60A1SSS26I sr_no_br_cl: 60A1SSS26I sr_cl: RENOLD60A1SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 25,3 mm Product line Renold Stainless Steel Weight (kg/m) 1,47 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-1 Height 2,6 Inside width 12,57 mm Breaking strength 30000 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 60-1 No. 26 closing link simplex 3/4" - 60A1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: closing link simplex 3/4" kpn: stainless steel 60-1 No. 26 kpn_dash: stainless steel 60 kpn_clear: stainlesssteel601No26 bkpn: RENOLD stainless steel 60-1 No. 26 bkpn_clear: RENOLD stainlesssteel601No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A1SSS26I sr_ns: RENOLD60A1SSS26I
r: 02274773 p: 24.917 pid: 88587 b: RENOLD q: 0 st: lt: 15 ean: 6623900927235 sr: RENOLD 10B1SNS12I sr_no_br: 10B1SNS12I sr_no_br_cl: 10B1SNS12I sr_cl: RENOLD10B1SNS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 2,04 mm Product line Renold Syno Number of the connecting link 12 Weight (kg/m) 1,01 kg/m Length (pin) 19,6 mm Height 1,4 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 22200 N Inside width 9,65 mm n: RENOLD 10B1SNS12I reducer SYNO 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: reducer SYNO 10b-1 - simplex 5/8 inch kpn: 10B1SNS12I kpn_dash: kpn_clear: 10B1SNS12I bkpn: RENOLD 10B1SNS12I bkpn_clear: RENOLD 10B1SNS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B1SNS12I sr_ns: RENOLD10B1SNS12I
r: 02097247 p: 24.844 pid: 89537 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A3S107I sr_no_br: 50A3S107I sr_no_br_cl: 50A3S107I sr_cl: RENOLD50A3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 2,04 mm Weight (kg/m) 2,96 kg/m Height 2,7 Breaking strength 65400 N Transverse pitch 18,11 mm Length (pin) 56,5 mm Inside width 9,4 mm Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Product line Renold Blue Type (ISO/ANSI) 50-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Blue 50-3 rivet plywood 5/8 inch - 50A3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet plywood 5/8 inch kpn: Blue 50-3 kpn_dash: Blue 50 kpn_clear: Blue503 bkpn: RENOLD Blue 50-3 bkpn_clear: RENOLD Blue503 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 50A3S107I sr_ns: RENOLD50A3S107I
r: 02097250 p: 24.844 pid: 87625 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A3S11I sr_no_br: 50A3S11I sr_no_br_cl: 50A3S11I sr_cl: RENOLD50A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 56,5 mm Product line Renold Blue Weight (kg/m) 2,96 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-3 Height 2,7 Inside width 9,4 mm Breaking strength 65400 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 50-3 No. 11 closing link plywood 5/8" - 50A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 5/8" kpn: BLUE 50-3 No. 11 kpn_dash: BLUE 50 kpn_clear: BLUE503No11 bkpn: RENOLD BLUE 50-3 No. 11 bkpn_clear: RENOLD BLUE503No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A3S11I sr_ns: RENOLD50A3S11I
r: 03030008 p: 24.462 pid: 88350 b: RENOLD q: 8 st: 1 lt: 1 ean: 0673766004126 sr: RENOLD 24B1S11I sr_no_br: 24B1S11I sr_no_br_cl: 24B1S11I sr_cl: RENOLD24B1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 52,6 mm Product line Renold Blue Weight (kg/m) 7,45 kg/m Thickness (outer plate) 5,08 mm Type (ISO/ANSI) 24B-1 Height 6,8 Inside width 25,4 mm Breaking strength 160000 N Diameter (pin) 14,63 mm Thickness (inner plate) 6,1 mm Plate height 33,4 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 24B-1 No. 11 closing link simplex 1 1/2" - 24B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 1/2" kpn: BLUE 24B-1 No. 11 kpn_dash: BLUE 24B kpn_clear: BLUE24B1No11 bkpn: RENOLD BLUE 24B-1 No. 11 bkpn_clear: RENOLD BLUE24B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 24B1S11I sr_ns: RENOLD24B1S11I
r: 03030580 p: 24.312 pid: 89747 b: RENOLD q: 0 st: lt: 15 ean: 0673766032587 sr: RENOLD 10B2SNS26I sr_no_br: 10B2SNS26I sr_no_br_cl: 10B2SNS26I sr_cl: RENOLD10B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 36,2 mm Product line Renold Syno Weight (kg/m) 1,93 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-2 Height 1,4 Inside width 9,65 mm Breaking strength 44500 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 10B-2 SN No. 26 connecting link duplex 5/8" - 10B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 5/8" kpn: SYNO 10B-2 SN No. 26 kpn_dash: SYNO 10B kpn_clear: SYNO10B2SNNo26 bkpn: RENOLD SYNO 10B-2 SN No. 26 bkpn_clear: RENOLD SYNO10B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B2SNS26I sr_ns: RENOLD10B2SNS26I
r: 03030046 p: 24.062 pid: 89590 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A3S26I sr_no_br: 50A3S26I sr_no_br_cl: 50A3S26I sr_cl: RENOLD50A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 56,5 mm Product line Renold Blue Weight (kg/m) 2,96 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-3 Height 2,7 Inside width 9,4 mm Breaking strength 65400 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 50-3 No. 26 closing link plywood 5/8" - 50A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 5/8" kpn: BLUE 50-3 No. 26 kpn_dash: BLUE 50 kpn_clear: BLUE503No26 bkpn: RENOLD BLUE 50-3 No. 26 bkpn_clear: RENOLD BLUE503No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A3S26I sr_ns: RENOLD50A3S26I
r: 03030434 p: 23.591 pid: 88127 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A1SSS107I sr_no_br: 60A1SSS107I sr_no_br_cl: 60A1SSS107I sr_cl: RENOLD60A1SSS107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 2,45 mm Weight (kg/m) 1,47 kg/m Height 2,6 Breaking strength 30000 N Length (pin) 25,3 mm Inside width 12,57 mm Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Product line Renold Stainless Steel Type (ISO/ANSI) 60-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 60-1 latch link simplex 3/4 inch - 60A1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: latch link simplex 3/4 inch kpn: Stainless Steel 60-1 kpn_dash: Stainless Steel 60 kpn_clear: StainlessSteel601 bkpn: RENOLD Stainless Steel 60-1 bkpn_clear: RENOLD StainlessSteel601 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 60A1SSS107I sr_ns: RENOLD60A1SSS107I
r: 03030372 p: 23.564 pid: 87754 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A3S26I sr_no_br: 35A3S26I sr_no_br_cl: 35A3S26I sr_cl: RENOLD35A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 32,2 mm Product line Renold Blue Weight (kg/m) 0,93 kg/m Thickness (outer plate) 1,29 mm Type (ISO/ANSI) 35-3 Height 1,7 Inside width 4,68 mm Breaking strength 23700 N Diameter (pin) 3,59 mm Thickness (inner plate) 1,29 mm Plate height 8,6 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 35-3 No. 26 master link plywood 3/8" - 35A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: master link plywood 3/8" kpn: BLUE 35-3 No. 26 kpn_dash: BLUE 35 kpn_clear: BLUE353No26 bkpn: RENOLD BLUE 35-3 No. 26 bkpn_clear: RENOLD BLUE353No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 35A3S26I sr_ns: RENOLD35A3S26I
r: 02097238 p: 23.564 pid: 87621 b: RENOLD q: 0 st: lt: 15 ean: 6623901223541 sr: RENOLD 35A3S107I sr_no_br: 35A3S107I sr_no_br_cl: 35A3S107I sr_cl: RENOLD35A3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,29 mm Weight (kg/m) 0,93 kg/m Height 1,7 Breaking strength 23700 N Transverse pitch 10,13 mm Length (pin) 32,2 mm Inside width 4,68 mm Diameter (pin) 3,59 mm Thickness (inner plate) 1,29 mm Plate height 8,6 mm Product line Renold Blue Type (ISO/ANSI) 35-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Blue 35-3 rivet link plywood 3/8 inch - 35A3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link plywood 3/8 inch kpn: Blue 35-3 kpn_dash: Blue 35 kpn_clear: Blue353 bkpn: RENOLD Blue 35-3 bkpn_clear: RENOLD Blue353 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 35A3S107I sr_ns: RENOLD35A3S107I
r: 03050089 p: 23.334 pid: 89820 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 05B2S30 sr_no_br: 05B2S30 sr_no_br_cl: 05B2S30 sr_cl: RENOLD05B2S30 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 8 mm Thickness (inner plate) 0,76 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,36 kg/m Length (pin) 14,3 mm Height 1,5 Thickness (outer plate) 0,76 mm Plate height 7,11 mm Type (ISO/ANSI) 05B-2 Version (link) Duplex Diameter (pin) 2,31 mm Diameter (roller) 5 mm Breaking strength 7800 N Inside width 3 mm n: RENOLD 05B2S30 reducer BLUE 05b-2 - duplex 5/16 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 05b-2 - duplex 5/16 inch kpn: 05B2S30 kpn_dash: kpn_clear: 05B2S30 bkpn: RENOLD 05B2S30 bkpn_clear: RENOLD 05B2S30 c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 05B2S30 sr_ns: RENOLD05B2S30
r: 03030432 p: 23.242 pid: 89684 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1SSS107I sr_no_br: 40A1SSS107I sr_no_br_cl: 40A1SSS107I sr_cl: RENOLD40A1SSS107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,6 kg/m Height 2,1 Breaking strength 10690 N Length (pin) 16,4 mm Inside width 7,85 mm Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Product line Renold Stainless Steel Type (ISO/ANSI) 40-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Stainless Steel 40-1 latch link simplex 1/2 inch - 40A1SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: latch link simplex 1/2 inch kpn: Stainless Steel 40-1 kpn_dash: Stainless Steel 40 kpn_clear: StainlessSteel401 bkpn: RENOLD Stainless Steel 40-1 bkpn_clear: RENOLD StainlessSteel401 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 40A1SSS107I sr_ns: RENOLD40A1SSS107I
r: 03050372 p: 23.118 pid: 89850 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1SSS12I sr_no_br: 40A1SSS12I sr_no_br_cl: 40A1SSS12I sr_cl: RENOLD40A1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-1 Version (link) Simplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 10690 N Inside width 7,85 mm n: RENOLD 40A1SSS12I reduction link stainless steel 40-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 40-1 - simplex 1/2 inch kpn: 40A1SSS12I kpn_dash: kpn_clear: 40A1SSS12I bkpn: RENOLD 40A1SSS12I bkpn_clear: RENOLD 40A1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A1SSS12I sr_ns: RENOLD40A1SSS12I
r: 03030578 p: 23.075 pid: 89701 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 06B2SNS26I sr_no_br: 06B2SNS26I sr_no_br_cl: 06B2SNS26I sr_cl: RENOLD06B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 23 mm Product line Renold Syno Weight (kg/m) 0,76 kg/m Thickness (outer plate) 1,04 mm Type (ISO/ANSI) 06B-2 Height 1,1 Inside width 5,72 mm Breaking strength 16900 N Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 06B-2 SN No. 26 master link duplex 3/8" - 06B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: master link duplex 3/8" kpn: SYNO 06B-2 SN No. 26 kpn_dash: SYNO 06B kpn_clear: SYNO06B2SNNo26 bkpn: RENOLD SYNO 06B-2 SN No. 26 bkpn_clear: RENOLD SYNO06B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 06B2SNS26I sr_ns: RENOLD06B2SNS26I
r: 03030237 p: 23.075 pid: 89621 b: RENOLD q: 0 st: lt: 15 ean: 0673766006410 sr: RENOLD GY06B2S107I sr_no_br: GY06B2S107I sr_no_br_cl: GY06B2S107I sr_cl: RENOLDGY06B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,04 mm Weight (kg/m) 0,78 kg/m Height 1,3 Breaking strength 16900 N Transverse pitch 10,24 mm Length (pin) 23 mm Inside width 5,72 mm Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Product line Renold Synergy Type (ISO/ANSI) O6B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Synergy O6b-2 rivet link duplex 3/8 inch - GY06B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet link duplex 3/8 inch kpn: Synergy O6b-2 kpn_dash: Synergy O6b kpn_clear: SynergyO6b2 bkpn: RENOLD Synergy O6b-2 bkpn_clear: RENOLD SynergyO6b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY06B2S107I sr_ns: RENOLDGY06B2S107I
r: 03030239 p: 22.861 pid: 87714 b: RENOLD q: 0 st: lt: 15 ean: 0673766006762 sr: RENOLD GY10B2S107I sr_no_br: GY10B2S107I sr_no_br_cl: GY10B2S107I sr_cl: RENOLDGY10B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 1,69 kg/m Height 2,5 Breaking strength 44500 N Transverse pitch 16,59 mm Length (pin) 35,4 mm Inside width 9,65 mm Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Product line Renold Synergy Type (ISO/ANSI) 10B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Synergy 10b-2 rivet link duplex 5/8 inch - GY10B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet link duplex 5/8 inch kpn: Synergy 10b-2 kpn_dash: Synergy 10b kpn_clear: Synergy10b2 bkpn: RENOLD Synergy 10b-2 bkpn_clear: RENOLD Synergy10b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY10B2S107I sr_ns: RENOLDGY10B2S107I
r: 03050016 p: 22.809 pid: 89758 b: RENOLD q: 8 st: 1 lt: 1 ean: 0673766007172 sr: RENOLD 16B2S12I sr_no_br: 16B2S12I sr_no_br_cl: 16B2S12I sr_cl: RENOLD16B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,76 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 5,5 kg/m Length (pin) 66,8 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-2 Version (link) Duplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 106000 N Inside width 17,02 mm n: RENOLD 16B2S12I reducer BLUE 16b-2 - duplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 16b-2 - duplex 1 inch kpn: 16B2S12I kpn_dash: kpn_clear: 16B2S12I bkpn: RENOLD 16B2S12I bkpn_clear: RENOLD 16B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 16B2S12I sr_ns: RENOLD16B2S12I
r: 03030586 p: 22.542 pid: 88146 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A1SNS26I sr_no_br: 60A1SNS26I sr_no_br_cl: 60A1SNS26I sr_cl: RENOLD60A1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 27 mm Product line Renold Syno Weight (kg/m) 1,73 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-1 Height 2,5 Inside width 12,57 mm Breaking strength 31300 N Diameter (pin) 5,95 mm Thickness (inner plate) 3,23 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 60-1 SN No. 26 closing link simplex 3/4" - 60A1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 3/4" kpn: SYNO 60-1 SN No. 26 kpn_dash: SYNO 60 kpn_clear: SYNO601SNNo26 bkpn: RENOLD SYNO 60-1 SN No. 26 bkpn_clear: RENOLD SYNO601SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A1SNS26I sr_ns: RENOLD60A1SNS26I
